From: Vignesh R Date: Wed, 7 Dec 2016 11:25:06 +0000 (+0530) Subject: regulator: fixed: Add support to handle enable-active-high DT property X-Git-Tag: v2017.01-rc3~34 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=bd2e9714c851770652253fab858cb50ecd95d329;p=oweals%2Fu-boot.git regulator: fixed: Add support to handle enable-active-high DT property Add support to handle enable-active-high DT property. This property is used to drive the gpio controlling fixed regulator as active high when claiming gpio line. Signed-off-by: Vignesh R Acked-by: Simon Glass --- diff --git a/doc/device-tree-bindings/regulator/fixed.txt b/doc/device-tree-bindings/regulator/fixed.txt index 8a0d002688..5fd9033fea 100644 --- a/doc/device-tree-bindings/regulator/fixed.txt +++ b/doc/device-tree-bindings/regulator/fixed.txt @@ -12,6 +12,9 @@ Optional properties: - gpio: GPIO to use for enable control - startup-delay-us: startup time in microseconds - regulator constraints (binding info: regulator.txt) +- enable-active-high: Polarity of GPIO is Active high. If this property + is missing, the default assumed is Active low. + Other kernel-style properties, are currently not used. @@ -36,4 +39,5 @@ fixed_regulator@0 { regulator-max-microamp = <15000>; regulator-always-on; regulator-boot-on; + enable-active-high; }; diff --git a/drivers/power/regulator/fixed.c b/drivers/power/regulator/fixed.c index 62dc47f769..3d2d9081c1 100644 --- a/drivers/power/regulator/fixed.c +++ b/drivers/power/regulator/fixed.c @@ -27,6 +27,8 @@ static int fixed_regulator_ofdata_to_platdata(struct udevice *dev) struct dm_regulator_uclass_platdata *uc_pdata; struct fixed_regulator_platdata *dev_pdata; struct gpio_desc *gpio; + const void *blob = gd->fdt_blob; + int node = dev->of_offset, flags = GPIOD_IS_OUT; int ret; dev_pdata = dev_get_platdata(dev); @@ -37,9 +39,12 @@ static int fixed_regulator_ofdata_to_platdata(struct udevice *dev) /* Set type to fixed */ uc_pdata->type = REGULATOR_TYPE_FIXED; + if (fdtdec_get_bool(blob, node, "enable-active-high")) + flags |= GPIOD_IS_OUT_ACTIVE; + /* Get fixed regulator optional enable GPIO desc */ gpio = &dev_pdata->gpio; - ret = gpio_request_by_name(dev, "gpio", 0, gpio, GPIOD_IS_OUT); + ret = gpio_request_by_name(dev, "gpio", 0, gpio, flags); if (ret) { debug("Fixed regulator optional enable GPIO - not found! Error: %d\n", ret);