From: Christian Hewitt <christianshewitt@gmail.com>
Date: Wed, 11 Dec 2019 09:20:53 +0000 (+0400)
Subject: ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1
X-Git-Tag: v2020.04-rc1~35^2~3
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=b9d5480fdbe8ce6de4c0dcb53f8a201ffd1758c6;p=oweals%2Fu-boot.git

ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1

Import the Khadas VIM3L device-tree from [1]

[1] e42617b825f8 ("Linux 5.5-rc1")

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0127a91a82..02e1945f76 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -153,6 +153,7 @@ dtb-$(CONFIG_ARCH_MESON) += \
 	meson-g12a-sei510.dtb \
 	meson-g12b-odroid-n2.dtb \
 	meson-g12b-a311d-khadas-vim3.dtb \
+	meson-sm1-khadas-vim3l.dtb \
 	meson-sm1-sei610.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
diff --git a/arch/arm/dts/meson-sm1-khadas-vim3l.dts b/arch/arm/dts/meson-sm1-khadas-vim3l.dts
new file mode 100644
index 0000000000..1001b376ca
--- /dev/null
+++ b/arch/arm/dts/meson-sm1-khadas-vim3l.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include "meson-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3l", "amlogic,sm1";
+	model = "Khadas VIM3L";
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * Silergy SY8030DEC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&vsys_3v3>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving
+ * these differential lines is shared between the USB3.0 controller
+ * and the PCIe Controller, thus only a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */