From: Dirk Eibach Date: Wed, 26 Jun 2013 13:55:17 +0000 (+0200) Subject: mpc85xx: Add gdsys ControlCenter Digital board X-Git-Tag: v2013.07~13 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=b9944a77f909e343f930dcbcc597224e65dfcca9;p=oweals%2Fu-boot.git mpc85xx: Add gdsys ControlCenter Digital board The gdsys ControlCenter Digital board is based on a Freescale P1022 QorIQ SOC. It boots from SPI-Flash but can be configured to boot from SD-card for factory programming and testing. On board peripherals include: - 2x GbE - Lattice ECP3 FPGA connected via PCIe - mSATA RAID1 - USB host - DisplayPort video output - Atmel TPM Signed-off-by: Dirk Eibach Signed-off-by: Reinhard Pfau Signed-off-by: Andy Fleming --- diff --git a/MAINTAINERS b/MAINTAINERS index 5b0e75bb01..081cf968e8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -160,8 +160,9 @@ egnite GmbH Dirk Eibach + controlcenterd P1022 devconcenter PPC460EX - dlvision PPC405EP + dlvision PPC405EP dlvision-10g PPC405EP gdppc440etx PPC440EP/GR intip PPC460EX diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index 05dd65df7a..13a9c5dc73 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -33,6 +33,7 @@ COBJS-$(CONFIG_IO) += miiphybb.o COBJS-$(CONFIG_IO64) += miiphybb.o COBJS-$(CONFIG_IOCON) += osd.o COBJS-$(CONFIG_DLVISION_10G) += osd.o +COBJS-$(CONFIG_CONTROLCENTERD) += dp501.o COBJS := $(COBJS-y) SOBJS = diff --git a/board/gdsys/common/dp501.c b/board/gdsys/common/dp501.c new file mode 100644 index 0000000000..9aa4e3f4bd --- /dev/null +++ b/board/gdsys/common/dp501.c @@ -0,0 +1,107 @@ +/* + * (C) Copyright 2012 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Parade Technologies Inc. DP501 DisplayPort DVI/HDMI Transmitter */ + +#include +#include +#include +#include + +static void dp501_setbits(u8 addr, u8 reg, u8 mask) +{ + u8 val; + + val = i2c_reg_read(addr, reg); + setbits_8(&val, mask); + i2c_reg_write(addr, reg, val); +} + +static void dp501_clrbits(u8 addr, u8 reg, u8 mask) +{ + u8 val; + + val = i2c_reg_read(addr, reg); + clrbits_8(&val, mask); + i2c_reg_write(addr, reg, val); +} + +static int dp501_detect_cable_adapter(u8 addr) +{ + u8 val = i2c_reg_read(addr, 0x00); + + return !(val & 0x04); +} + +static void dp501_link_training(u8 addr) +{ + u8 val; + + val = i2c_reg_read(addr, 0x51); + i2c_reg_write(addr, 0x5d, val); /* set link_bw */ + val = i2c_reg_read(addr, 0x52); + i2c_reg_write(addr, 0x5e, val); /* set lane_cnt */ + val = i2c_reg_read(addr, 0x53); + i2c_reg_write(addr, 0x5c, val); /* set downspread_ctl */ + + i2c_reg_write(addr, 0x5f, 0x0d); /* start training */ +} + +void dp501_powerup(u8 addr) +{ + dp501_clrbits(addr, 0x0a, 0x30); /* power on encoder */ + i2c_reg_write(addr, 0x27, 0x30); /* Hardware auto detect DVO timing */ + dp501_setbits(addr, 0x72, 0x80); /* DPCD read enable */ + dp501_setbits(addr, 0x30, 0x20); /* RS polynomial select */ + i2c_reg_write(addr, 0x71, 0x20); /* Enable Aux burst write */ + dp501_setbits(addr, 0x78, 0x30); /* Disable HPD2 IRQ */ + dp501_clrbits(addr, 0x2f, 0x40); /* Link FIFO reset selection */ + i2c_reg_write(addr, 0x24, 0xc0); /* SDR mode 0, ext. H/VSYNC */ + i2c_reg_write(addr + 2, 0x24, 0x02); /* clock input single ended */ + + if (dp501_detect_cable_adapter(addr)) { + printf("DVI/HDMI cable adapter detected\n"); + i2c_reg_write(addr, 0x5e, 0x04); /* enable 4 channel */ + dp501_clrbits(addr, 0x00, 0x08); /* DVI/HDMI HDCP operation */ + } else { + printf("no DVI/HDMI cable adapter detected\n"); + i2c_reg_write(addr + 2, 0x00, 0x18); /* driving strength */ + i2c_reg_write(addr + 2, 0x03, 0x06); /* driving strength */ + i2c_reg_write(addr, 0x2c, 0x00); /* configure N value */ + i2c_reg_write(addr, 0x2d, 0x00); /* configure N value */ + i2c_reg_write(addr, 0x2e, 0x0c); /* configure N value */ + i2c_reg_write(addr, 0x76, 0xff); /* clear all interrupt */ + dp501_setbits(addr, 0x78, 0x03); /* clear all interrupt */ + i2c_reg_write(addr, 0x75, 0xf8); /* aux channel reset */ + i2c_reg_write(addr, 0x75, 0x00); /* clear aux channel reset */ + i2c_reg_write(addr, 0x87, 0x70); /* set retry counter as 7 */ + dp501_setbits(addr, 0x00, 0x08); /* for DP HDCP operation */ + + dp501_link_training(addr); + } +} + +void dp501_powerdown(u8 addr) +{ + dp501_setbits(addr, 0x0a, 0x30); /* power down encoder, standby mode */ +} diff --git a/board/gdsys/common/dp501.h b/board/gdsys/common/dp501.h new file mode 100644 index 0000000000..8dc3215dcf --- /dev/null +++ b/board/gdsys/common/dp501.h @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2012 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _DP501_H_ +#define _DP501_H_ + +void dp501_powerup(u8 addr); +void dp501_powerdown(u8 addr); + +#endif diff --git a/board/gdsys/p1022/Makefile b/board/gdsys/p1022/Makefile new file mode 100644 index 0000000000..17f602f7ef --- /dev/null +++ b/board/gdsys/p1022/Makefile @@ -0,0 +1,37 @@ +# +# Copyright 2010 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +# COBJS-y += $(BOARD).o +COBJS-y += law.o +COBJS-y += ddr.o +COBJS-y += tlb.o +COBJS-y += sdhc_boot.o +COBJS-$(CONFIG_CONTROLCENTERD) += controlcenterd.o controlcenterd-id.o + +COBJS-$(CONFIG_FSL_DIU_FB) += diu.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/gdsys/p1022/controlcenterd-id.c b/board/gdsys/p1022/controlcenterd-id.c new file mode 100644 index 0000000000..3fca3c53b2 --- /dev/null +++ b/board/gdsys/p1022/controlcenterd-id.c @@ -0,0 +1,1224 @@ +/* + * (C) Copyright 2013 + * Reinhard Pfau, Guntermann & Drunck GmbH, reinhard.pfau@gdsys.cc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +/* TODO: some more #ifdef's to avoid unneeded code for stage 1 / stage 2 */ + +#ifdef CCDM_ID_DEBUG +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef CCDM_FIRST_STAGE +#undef CCDM_SECOND_STAGE +#undef CCDM_AUTO_FIRST_STAGE + +#ifdef CONFIG_DEVELOP +#define CCDM_DEVELOP +#endif + +#ifdef CONFIG_TRAILBLAZER +#define CCDM_FIRST_STAGE +#undef CCDM_SECOND_STAGE +#else +#undef CCDM_FIRST_STAGE +#define CCDM_SECOND_STAGE +#endif + +#if defined(CCDM_DEVELOP) && defined(CCDM_SECOND_STAGE) && \ + !defined(CCCM_FIRST_STAGE) +#define CCDM_AUTO_FIRST_STAGE +#endif + +/* enums from TCG specs */ +enum { + /* capability areas */ + TPM_CAP_NV_INDEX = 0x00000011, + TPM_CAP_HANDLE = 0x00000014, + /* resource types */ + TPM_RT_KEY = 0x00000001, +}; + +/* CCDM specific contants */ +enum { + /* NV indices */ + NV_COMMON_DATA_INDEX = 0x40000001, + /* magics for key blob chains */ + MAGIC_KEY_PROGRAM = 0x68726500, + MAGIC_HMAC = 0x68616300, + MAGIC_END_OF_CHAIN = 0x00000000, + /* sizes */ + NV_COMMON_DATA_MIN_SIZE = 3 * sizeof(uint64_t) + 2 * sizeof(uint16_t), +}; + +/* other constants */ +enum { + ESDHC_BOOT_IMAGE_SIG_OFS = 0x40, + ESDHC_BOOT_IMAGE_SIZE_OFS = 0x48, + ESDHC_BOOT_IMAGE_ADDR_OFS = 0x50, + ESDHC_BOOT_IMAGE_TARGET_OFS = 0x58, + ESDHC_BOOT_IMAGE_ENTRY_OFS = 0x60, +}; + +struct key_program { + uint32_t magic; + uint32_t code_crc; + uint32_t code_size; + uint8_t code[]; +}; + +struct h_reg { + bool valid; + uint8_t digest[20]; +}; + + +enum access_mode { + HREG_NONE = 0, + HREG_RD = 1, + HREG_WR = 2, + HREG_RDWR = 3, +}; + +/* register constants */ +enum { + FIX_HREG_DEVICE_ID_HASH = 0, + FIX_HREG_SELF_HASH = 1, + FIX_HREG_STAGE2_HASH = 2, + FIX_HREG_VENDOR = 3, + COUNT_FIX_HREGS +}; + + +/* hre opcodes */ +enum { + /* opcodes w/o data */ + HRE_NOP = 0x00, + HRE_SYNC = HRE_NOP, + HRE_CHECK0 = 0x01, + /* opcodes w/o data, w/ sync dst */ + /* opcodes w/ data */ + HRE_LOAD = 0x81, + /* opcodes w/data, w/sync dst */ + HRE_XOR = 0xC1, + HRE_AND = 0xC2, + HRE_OR = 0xC3, + HRE_EXTEND = 0xC4, + HRE_LOADKEY = 0xC5, +}; + +/* hre errors */ +enum { + HRE_E_OK = 0, + HRE_E_TPM_FAILURE, + HRE_E_INVALID_HREG, +}; + +static uint64_t device_id; +static uint64_t device_cl; +static uint64_t device_type; + +static uint32_t platform_key_handle; + +static void(*bl2_entry)(void); + +static struct h_reg pcr_hregs[24]; +static struct h_reg fix_hregs[COUNT_FIX_HREGS]; +static struct h_reg var_hregs[8]; +static uint32_t hre_tpm_err; +static int hre_err = HRE_E_OK; + +#define IS_PCR_HREG(spec) ((spec) & 0x20) +#define IS_FIX_HREG(spec) (((spec) & 0x38) == 0x08) +#define IS_VAR_HREG(spec) (((spec) & 0x38) == 0x10) +#define HREG_IDX(spec) ((spec) & (IS_PCR_HREG(spec) ? 0x1f : 0x7)) + + +static const uint8_t prg_stage1_prepare[] = { + 0x00, 0x20, 0x00, 0x00, /* opcode: SYNC f0 */ + 0x00, 0x24, 0x00, 0x00, /* opcode: SYNC f1 */ + 0x01, 0x80, 0x00, 0x00, /* opcode: CHECK0 PCR0 */ + 0x81, 0x22, 0x00, 0x00, /* opcode: LOAD PCR0, f0 */ + 0x01, 0x84, 0x00, 0x00, /* opcode: CHECK0 PCR1 */ + 0x81, 0x26, 0x10, 0x00, /* opcode: LOAD PCR1, f1 */ + 0x01, 0x88, 0x00, 0x00, /* opcode: CHECK0 PCR2 */ + 0x81, 0x2a, 0x20, 0x00, /* opcode: LOAD PCR2, f2 */ + 0x01, 0x8c, 0x00, 0x00, /* opcode: CHECK0 PCR3 */ + 0x81, 0x2e, 0x30, 0x00, /* opcode: LOAD PCR3, f3 */ +}; + +static const uint8_t prg_stage2_prepare[] = { + 0x00, 0x80, 0x00, 0x00, /* opcode: SYNC PCR0 */ + 0x00, 0x84, 0x00, 0x00, /* opcode: SYNC PCR1 */ + 0x00, 0x88, 0x00, 0x00, /* opcode: SYNC PCR2 */ + 0x00, 0x8c, 0x00, 0x00, /* opcode: SYNC PCR3 */ + 0x00, 0x90, 0x00, 0x00, /* opcode: SYNC PCR4 */ +}; + +static const uint8_t prg_stage2_success[] = { + 0x81, 0x02, 0x40, 0x14, /* opcode: LOAD PCR4, #<20B data> */ + 0x48, 0xfd, 0x95, 0x17, 0xe7, 0x54, 0x6b, 0x68, /* data */ + 0x92, 0x31, 0x18, 0x05, 0xf8, 0x58, 0x58, 0x3c, /* data */ + 0xe4, 0xd2, 0x81, 0xe0, /* data */ +}; + +static const uint8_t prg_stage_fail[] = { + 0x81, 0x01, 0x00, 0x14, /* opcode: LOAD v0, #<20B data> */ + 0xc0, 0x32, 0xad, 0xc1, 0xff, 0x62, 0x9c, 0x9b, /* data */ + 0x66, 0xf2, 0x27, 0x49, 0xad, 0x66, 0x7e, 0x6b, /* data */ + 0xea, 0xdf, 0x14, 0x4b, /* data */ + 0x81, 0x42, 0x30, 0x00, /* opcode: LOAD PCR3, v0 */ + 0x81, 0x42, 0x40, 0x00, /* opcode: LOAD PCR4, v0 */ +}; + +static const uint8_t vendor[] = "Guntermann & Drunck"; + + +/** + * @brief read a bunch of data from MMC into memory. + * + * @param mmc pointer to the mmc structure to use. + * @param src offset where the data starts on MMC/SD device (in bytes). + * @param dst pointer to the location where the read data should be stored. + * @param size number of bytes to read from the MMC/SD device. + * @return number of bytes read or -1 on error. + */ +static int ccdm_mmc_read(struct mmc *mmc, u64 src, u8 *dst, int size) +{ + int result = 0; + u32 blk_len, ofs; + ulong block_no, n, cnt; + u8 *tmp_buf = NULL; + + if (size <= 0) + goto end; + + blk_len = mmc->read_bl_len; + tmp_buf = malloc(blk_len); + if (!tmp_buf) + goto failure; + block_no = src / blk_len; + ofs = src % blk_len; + + if (ofs) { + n = mmc->block_dev.block_read(mmc->block_dev.dev, block_no++, 1, + tmp_buf); + if (!n) + goto failure; + result = min(size, blk_len - ofs); + memcpy(dst, tmp_buf + ofs, result); + dst += result; + size -= result; + } + cnt = size / blk_len; + if (cnt) { + n = mmc->block_dev.block_read(mmc->block_dev.dev, block_no, cnt, + dst); + if (n != cnt) + goto failure; + size -= cnt * blk_len; + result += cnt * blk_len; + dst += cnt * blk_len; + block_no += cnt; + } + if (size) { + n = mmc->block_dev.block_read(mmc->block_dev.dev, block_no++, 1, + tmp_buf); + if (!n) + goto failure; + memcpy(dst, tmp_buf, size); + result += size; + } + goto end; +failure: + result = -1; +end: + if (tmp_buf) + free(tmp_buf); + return result; +} + +/** + * @brief returns a location where the 2nd stage bootloader can be(/ is) placed. + * + * @return pointer to the location for/of the 2nd stage bootloader + */ +static u8 *get_2nd_stage_bl_location(ulong target_addr) +{ + ulong addr; +#ifdef CCDM_SECOND_STAGE + addr = getenv_ulong("loadaddr", 16, CONFIG_LOADADDR); +#else + addr = target_addr; +#endif + return (u8 *)(addr); +} + + +#ifdef CCDM_SECOND_STAGE +/** + * @brief returns a location where the image can be(/ is) placed. + * + * @return pointer to the location for/of the image + */ +static u8 *get_image_location(void) +{ + ulong addr; + /* TODO use other area? */ + addr = getenv_ulong("loadaddr", 16, CONFIG_LOADADDR); + return (u8 *)(addr); +} +#endif + +/** + * @brief get the size of a given (TPM) NV area + * @param index NV index of the area to get size for + * @param size pointer to the size + * @return 0 on success, != 0 on error + */ +static int get_tpm_nv_size(uint32_t index, uint32_t *size) +{ + uint32_t err; + uint8_t info[72]; + uint8_t *ptr; + uint16_t v16; + + err = tpm_get_capability(TPM_CAP_NV_INDEX, index, + info, sizeof(info)); + if (err) { + printf("tpm_get_capability(CAP_NV_INDEX, %08x) failed: %u\n", + index, err); + return 1; + } + + /* skip tag and nvIndex */ + ptr = info + 6; + /* skip 2 pcr info fields */ + v16 = get_unaligned_be16(ptr); + ptr += 2 + v16 + 1 + 20; + v16 = get_unaligned_be16(ptr); + ptr += 2 + v16 + 1 + 20; + /* skip permission and flags */ + ptr += 6 + 3; + + *size = get_unaligned_be32(ptr); + return 0; +} + +/** + * @brief search for a key by usage auth and pub key hash. + * @param auth usage auth of the key to search for + * @param pubkey_digest (SHA1) hash of the pub key structure of the key + * @param[out] handle the handle of the key iff found + * @return 0 if key was found in TPM; != 0 if not. + */ +static int find_key(const uint8_t auth[20], const uint8_t pubkey_digest[20], + uint32_t *handle) +{ + uint16_t key_count; + uint32_t key_handles[10]; + uint8_t buf[288]; + uint8_t *ptr; + uint32_t err; + uint8_t digest[20]; + size_t buf_len; + unsigned int i; + + /* fetch list of already loaded keys in the TPM */ + err = tpm_get_capability(TPM_CAP_HANDLE, TPM_RT_KEY, buf, sizeof(buf)); + if (err) + return -1; + key_count = get_unaligned_be16(buf); + ptr = buf + 2; + for (i = 0; i < key_count; ++i, ptr += 4) + key_handles[i] = get_unaligned_be32(ptr); + + /* now search a(/ the) key which we can access with the given auth */ + for (i = 0; i < key_count; ++i) { + buf_len = sizeof(buf); + err = tpm_get_pub_key_oiap(key_handles[i], auth, buf, &buf_len); + if (err && err != TPM_AUTHFAIL) + return -1; + if (err) + continue; + sha1_csum(buf, buf_len, digest); + if (!memcmp(digest, pubkey_digest, 20)) { + *handle = key_handles[i]; + return 0; + } + } + return 1; +} + +/** + * @brief read CCDM common data from TPM NV + * @return 0 if CCDM common data was found and read, !=0 if something failed. + */ +static int read_common_data(void) +{ + uint32_t size; + uint32_t err; + uint8_t buf[256]; + sha1_context ctx; + + if (get_tpm_nv_size(NV_COMMON_DATA_INDEX, &size) || + size < NV_COMMON_DATA_MIN_SIZE) + return 1; + err = tpm_nv_read_value(NV_COMMON_DATA_INDEX, + buf, min(sizeof(buf), size)); + if (err) { + printf("tpm_nv_read_value() failed: %u\n", err); + return 1; + } + + device_id = get_unaligned_be64(buf); + device_cl = get_unaligned_be64(buf + 8); + device_type = get_unaligned_be64(buf + 16); + + sha1_starts(&ctx); + sha1_update(&ctx, buf, 24); + sha1_finish(&ctx, fix_hregs[FIX_HREG_DEVICE_ID_HASH].digest); + fix_hregs[FIX_HREG_DEVICE_ID_HASH].valid = true; + + platform_key_handle = get_unaligned_be32(buf + 24); + + return 0; +} + +/** + * @brief compute hash of bootloader itself. + * @param[out] dst hash register where the hash should be stored + * @return 0 on success, != 0 on failure. + * + * @note MUST be called at a time where the boot loader is accessible at the + * configured location (; so take care when code is reallocated). + */ +static int compute_self_hash(struct h_reg *dst) +{ + sha1_csum((const uint8_t *)CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_LEN, dst->digest); + dst->valid = true; + return 0; +} + +int ccdm_compute_self_hash(void) +{ + if (!fix_hregs[FIX_HREG_SELF_HASH].valid) + compute_self_hash(&fix_hregs[FIX_HREG_SELF_HASH]); + return 0; +} + +/** + * @brief compute the hash of the 2nd stage boot loader (on SD card) + * @param[out] dst hash register to store the computed hash + * @return 0 on success, != 0 on failure + * + * Determines the size and location of the 2nd stage boot loader on SD card, + * loads the 2nd stage boot loader and computes the (SHA1) hash value. + * Within the 1st stage boot loader, the 2nd stage boot loader is loaded at + * the desired memory location and the variable @a bl2_entry is set. + * + * @note This sets the variable @a bl2_entry to the entry point when the + * 2nd stage boot loader is loaded at its configured memory location. + */ +static int compute_second_stage_hash(struct h_reg *dst) +{ + int result = 0; + u32 code_len, code_offset, target_addr, exec_entry; + struct mmc *mmc; + u8 *load_addr = NULL; + u8 buf[128]; + + mmc = find_mmc_device(0); + if (!mmc) + goto failure; + mmc_init(mmc); + + if (ccdm_mmc_read(mmc, 0, buf, sizeof(buf)) < 0) + goto failure; + + code_offset = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ADDR_OFS); + code_len = *(u32 *)(buf + ESDHC_BOOT_IMAGE_SIZE_OFS); + target_addr = *(u32 *)(buf + ESDHC_BOOT_IMAGE_TARGET_OFS); + exec_entry = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ENTRY_OFS); + + load_addr = get_2nd_stage_bl_location(target_addr); + if (load_addr == (u8 *)target_addr) + bl2_entry = (void(*)(void))exec_entry; + + if (ccdm_mmc_read(mmc, code_offset, load_addr, code_len) < 0) + goto failure; + + sha1_csum(load_addr, code_len, dst->digest); + dst->valid = true; + + goto end; +failure: + result = 1; + bl2_entry = NULL; +end: + return result; +} + +/** + * @brief get pointer to hash register by specification + * @param spec specification of a hash register + * @return pointer to hash register or NULL if @a spec does not qualify a + * valid hash register; NULL else. + */ +static struct h_reg *get_hreg(uint8_t spec) +{ + uint8_t idx; + + idx = HREG_IDX(spec); + if (IS_FIX_HREG(spec)) { + if (idx < ARRAY_SIZE(fix_hregs)) + return fix_hregs + idx; + hre_err = HRE_E_INVALID_HREG; + } else if (IS_PCR_HREG(spec)) { + if (idx < ARRAY_SIZE(pcr_hregs)) + return pcr_hregs + idx; + hre_err = HRE_E_INVALID_HREG; + } else if (IS_VAR_HREG(spec)) { + if (idx < ARRAY_SIZE(var_hregs)) + return var_hregs + idx; + hre_err = HRE_E_INVALID_HREG; + } + return NULL; +} + +/** + * @brief get pointer of a hash register by specification and usage. + * @param spec specification of a hash register + * @param mode access mode (read or write or read/write) + * @return pointer to hash register if found and valid; NULL else. + * + * This func uses @a get_reg() to determine the hash register for a given spec. + * If a register is found it is validated according to the desired access mode. + * The value of automatic registers (PCR register and fixed registers) is + * loaded or computed on read access. + */ +static struct h_reg *access_hreg(uint8_t spec, enum access_mode mode) +{ + struct h_reg *result; + + result = get_hreg(spec); + if (!result) + return NULL; + + if (mode & HREG_WR) { + if (IS_FIX_HREG(spec)) { + hre_err = HRE_E_INVALID_HREG; + return NULL; + } + } + if (mode & HREG_RD) { + if (!result->valid) { + if (IS_PCR_HREG(spec)) { + hre_tpm_err = tpm_pcr_read(HREG_IDX(spec), + result->digest, 20); + result->valid = (hre_tpm_err == TPM_SUCCESS); + } else if (IS_FIX_HREG(spec)) { + switch (HREG_IDX(spec)) { + case FIX_HREG_DEVICE_ID_HASH: + read_common_data(); + break; + case FIX_HREG_SELF_HASH: + ccdm_compute_self_hash(); + break; + case FIX_HREG_STAGE2_HASH: + compute_second_stage_hash(result); + break; + case FIX_HREG_VENDOR: + memcpy(result->digest, vendor, 20); + result->valid = true; + break; + } + } else { + result->valid = true; + } + } + if (!result->valid) { + hre_err = HRE_E_INVALID_HREG; + return NULL; + } + } + + return result; +} + +static void *compute_and(void *_dst, const void *_src, size_t n) +{ + uint8_t *dst = _dst; + const uint8_t *src = _src; + size_t i; + + for (i = n; i-- > 0; ) + *dst++ &= *src++; + + return _dst; +} + +static void *compute_or(void *_dst, const void *_src, size_t n) +{ + uint8_t *dst = _dst; + const uint8_t *src = _src; + size_t i; + + for (i = n; i-- > 0; ) + *dst++ |= *src++; + + return _dst; +} + +static void *compute_xor(void *_dst, const void *_src, size_t n) +{ + uint8_t *dst = _dst; + const uint8_t *src = _src; + size_t i; + + for (i = n; i-- > 0; ) + *dst++ ^= *src++; + + return _dst; +} + +static void *compute_extend(void *_dst, const void *_src, size_t n) +{ + uint8_t digest[20]; + sha1_context ctx; + + sha1_starts(&ctx); + sha1_update(&ctx, _dst, n); + sha1_update(&ctx, _src, n); + sha1_finish(&ctx, digest); + memcpy(_dst, digest, min(n, sizeof(digest))); + + return _dst; +} + +static int hre_op_loadkey(struct h_reg *src_reg, struct h_reg *dst_reg, + const void *key, size_t key_size) +{ + uint32_t parent_handle; + uint32_t key_handle; + + if (!src_reg || !dst_reg || !src_reg->valid || !dst_reg->valid) + return -1; + if (find_key(src_reg->digest, dst_reg->digest, &parent_handle)) + return -1; + hre_tpm_err = tpm_load_key2_oiap(parent_handle, key, key_size, + src_reg->digest, &key_handle); + if (hre_tpm_err) { + hre_err = HRE_E_TPM_FAILURE; + return -1; + } + /* TODO remember key handle somehow? */ + + return 0; +} + +/** + * @brief executes the next opcode on the hash register engine. + * @param[in,out] ip pointer to the opcode (instruction pointer) + * @param[in,out] code_size (remaining) size of the code + * @return new instruction pointer on success, NULL on error. + */ +static const uint8_t *hre_execute_op(const uint8_t **ip, size_t *code_size) +{ + bool dst_modified = false; + uint32_t ins; + uint8_t opcode; + uint8_t src_spec; + uint8_t dst_spec; + uint16_t data_size; + struct h_reg *src_reg, *dst_reg; + uint8_t buf[20]; + const uint8_t *src_buf, *data; + uint8_t *ptr; + int i; + void * (*bin_func)(void *, const void *, size_t); + + if (*code_size < 4) + return NULL; + + ins = get_unaligned_be32(*ip); + opcode = **ip; + data = *ip + 4; + src_spec = (ins >> 18) & 0x3f; + dst_spec = (ins >> 12) & 0x3f; + data_size = (ins & 0x7ff); + + debug("HRE: ins=%08x (op=%02x, s=%02x, d=%02x, L=%d)\n", ins, + opcode, src_spec, dst_spec, data_size); + + if ((opcode & 0x80) && (data_size + 4) > *code_size) + return NULL; + + src_reg = access_hreg(src_spec, HREG_RD); + if (hre_err || hre_tpm_err) + return NULL; + dst_reg = access_hreg(dst_spec, (opcode & 0x40) ? HREG_RDWR : HREG_WR); + if (hre_err || hre_tpm_err) + return NULL; + + switch (opcode) { + case HRE_NOP: + goto end; + case HRE_CHECK0: + if (src_reg) { + for (i = 0; i < 20; ++i) { + if (src_reg->digest[i]) + return NULL; + } + } + break; + case HRE_LOAD: + bin_func = memcpy; + goto do_bin_func; + case HRE_XOR: + bin_func = compute_xor; + goto do_bin_func; + case HRE_AND: + bin_func = compute_and; + goto do_bin_func; + case HRE_OR: + bin_func = compute_or; + goto do_bin_func; + case HRE_EXTEND: + bin_func = compute_extend; +do_bin_func: + if (!dst_reg) + return NULL; + if (src_reg) { + src_buf = src_reg->digest; + } else { + if (!data_size) { + memset(buf, 0, 20); + src_buf = buf; + } else if (data_size == 1) { + memset(buf, *data, 20); + src_buf = buf; + } else if (data_size >= 20) { + src_buf = data; + } else { + src_buf = buf; + for (ptr = (uint8_t *)src_buf, i = 20; i > 0; + i -= data_size, ptr += data_size) + memcpy(ptr, data, min(i, data_size)); + } + } + bin_func(dst_reg->digest, src_buf, 20); + dst_reg->valid = true; + dst_modified = true; + break; + case HRE_LOADKEY: + if (hre_op_loadkey(src_reg, dst_reg, data, data_size)) + return NULL; + break; + default: + return NULL; + } + + if (dst_reg && dst_modified && IS_PCR_HREG(dst_spec)) { + hre_tpm_err = tpm_extend(HREG_IDX(dst_spec), dst_reg->digest, + dst_reg->digest); + if (hre_tpm_err) { + hre_err = HRE_E_TPM_FAILURE; + return NULL; + } + } +end: + *ip += 4; + *code_size -= 4; + if (opcode & 0x80) { + *ip += data_size; + *code_size -= data_size; + } + + return *ip; +} + +/** + * @brief runs a program on the hash register engine. + * @param code pointer to the (HRE) code. + * @param code_size size of the code (in bytes). + * @return 0 on success, != 0 on failure. + */ +static int hre_run_program(const uint8_t *code, size_t code_size) +{ + size_t code_left; + const uint8_t *ip = code; + + code_left = code_size; + hre_tpm_err = 0; + hre_err = HRE_E_OK; + while (code_left > 0) + if (!hre_execute_op(&ip, &code_left)) + return -1; + + return hre_err; +} + +static int check_hmac(struct key_program *hmac, + const uint8_t *data, size_t data_size) +{ + uint8_t key[20], computed_hmac[20]; + uint32_t type; + + type = get_unaligned_be32(hmac->code); + if (type != 0) + return 1; + memset(key, 0, sizeof(key)); + compute_extend(key, pcr_hregs[1].digest, 20); + compute_extend(key, pcr_hregs[2].digest, 20); + compute_extend(key, pcr_hregs[3].digest, 20); + compute_extend(key, pcr_hregs[4].digest, 20); + + sha1_hmac(key, sizeof(key), data, data_size, computed_hmac); + + return memcmp(computed_hmac, hmac->code + 4, 20); +} + +static int verify_program(struct key_program *prg) +{ + uint32_t crc; + crc = crc32(0, prg->code, prg->code_size); + + if (crc != prg->code_crc) { + printf("HRC crc mismatch: %08x != %08x\n", + crc, prg->code_crc); + return 1; + } + return 0; +} + +#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE) +static struct key_program *load_sd_key_program(void) +{ + u32 code_len, code_offset; + struct mmc *mmc; + u8 buf[128]; + struct key_program *result = NULL, *hmac = NULL; + struct key_program header; + + mmc = find_mmc_device(0); + if (!mmc) + return NULL; + mmc_init(mmc); + + if (ccdm_mmc_read(mmc, 0, buf, sizeof(buf)) <= 0) + goto failure; + + code_offset = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ADDR_OFS); + code_len = *(u32 *)(buf + ESDHC_BOOT_IMAGE_SIZE_OFS); + + code_offset += code_len; + /* TODO: the following needs to be the size of the 2nd stage env */ + code_offset += CONFIG_ENV_SIZE; + + if (ccdm_mmc_read(mmc, code_offset, buf, 4*3) < 0) + goto failure; + + header.magic = get_unaligned_be32(buf); + header.code_crc = get_unaligned_be32(buf + 4); + header.code_size = get_unaligned_be32(buf + 8); + + if (header.magic != MAGIC_KEY_PROGRAM) + goto failure; + + result = malloc(sizeof(struct key_program) + header.code_size); + if (!result) + goto failure; + *result = header; + + printf("load key program chunk from SD card (%u bytes) ", + header.code_size); + code_offset += 12; + if (ccdm_mmc_read(mmc, code_offset, result->code, header.code_size) + < 0) + goto failure; + code_offset += header.code_size; + puts("\n"); + + if (verify_program(result)) + goto failure; + + if (ccdm_mmc_read(mmc, code_offset, buf, 4*3) < 0) + goto failure; + + header.magic = get_unaligned_be32(buf); + header.code_crc = get_unaligned_be32(buf + 4); + header.code_size = get_unaligned_be32(buf + 8); + + if (header.magic == MAGIC_HMAC) { + puts("check integrity\n"); + hmac = malloc(sizeof(struct key_program) + header.code_size); + if (!hmac) + goto failure; + *hmac = header; + code_offset += 12; + if (ccdm_mmc_read(mmc, code_offset, hmac->code, + hmac->code_size) < 0) + goto failure; + if (verify_program(hmac)) + goto failure; + if (check_hmac(hmac, result->code, result->code_size)) { + puts("key program integrity could not be verified\n"); + goto failure; + } + puts("key program verified\n"); + } + + goto end; +failure: + if (result) + free(result); + result = NULL; +end: + if (hmac) + free(hmac); + + return result; +} +#endif + +#ifdef CCDM_SECOND_STAGE +/** + * @brief load a key program from file system. + * @param ifname interface of the file system + * @param dev_part_str device part of the file system + * @param fs_type tyep of the file system + * @param path path of the file to load. + * @return the loaded structure or NULL on failure. + */ +static struct key_program *load_key_chunk(const char *ifname, + const char *dev_part_str, int fs_type, + const char *path) +{ + struct key_program *result = NULL; + struct key_program header; + uint32_t crc; + uint8_t buf[12]; + int i; + + if (fs_set_blk_dev(ifname, dev_part_str, fs_type)) + goto failure; + i = fs_read(path, (ulong)buf, 0, 12); + if (i < 12) + goto failure; + header.magic = get_unaligned_be32(buf); + header.code_crc = get_unaligned_be32(buf + 4); + header.code_size = get_unaligned_be32(buf + 8); + + if (header.magic != MAGIC_HMAC && header.magic != MAGIC_KEY_PROGRAM) + goto failure; + + result = malloc(sizeof(struct key_program) + header.code_size); + if (!result) + goto failure; + if (fs_set_blk_dev(ifname, dev_part_str, fs_type)) + goto failure; + i = fs_read(path, (ulong)result, 0, + sizeof(struct key_program) + header.code_size); + if (i <= 0) + goto failure; + *result = header; + + crc = crc32(0, result->code, result->code_size); + + if (crc != result->code_crc) { + printf("%s: HRC crc mismatch: %08x != %08x\n", + path, crc, result->code_crc); + goto failure; + } + goto end; +failure: + if (result) { + free(result); + result = NULL; + } +end: + return result; +} +#endif + +#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE) +static int first_stage_actions(void) +{ + int result = 0; + struct key_program *sd_prg = NULL; + + puts("CCDM S1: start actions\n"); +#ifndef CCDM_SECOND_STAGE + if (tpm_continue_self_test()) + goto failure; +#else + tpm_continue_self_test(); +#endif + mdelay(37); + + if (hre_run_program(prg_stage1_prepare, sizeof(prg_stage1_prepare))) + goto failure; + + sd_prg = load_sd_key_program(); + if (sd_prg) { + if (hre_run_program(sd_prg->code, sd_prg->code_size)) + goto failure; + puts("SD code run successfully\n"); + } else { + puts("no key program found on SD\n"); + goto failure; + } + goto end; +failure: + result = 1; +end: + if (sd_prg) + free(sd_prg); + printf("CCDM S1: actions done (%d)\n", result); + return result; +} +#endif + +#ifdef CCDM_FIRST_STAGE +static int first_stage_init(void) +{ + int res = 0; + puts("CCDM S1\n"); + if (tpm_init() || tpm_startup(TPM_ST_CLEAR)) + return 1; + res = first_stage_actions(); +#ifndef CCDM_SECOND_STAGE + if (!res) { + if (bl2_entry) + (*bl2_entry)(); + res = 1; + } +#endif + return res; +} +#endif + +#ifdef CCDM_SECOND_STAGE +static int second_stage_init(void) +{ + static const char mac_suffix[] = ".mac"; + bool did_first_stage_run = true; + int result = 0; + char *cptr, *mmcdev = NULL; + struct key_program *hmac_blob = NULL; + const char *image_path = "/ccdm.itb"; + char *mac_path = NULL; + ulong image_addr; + size_t image_size; + uint32_t err; + + printf("CCDM S2\n"); + if (tpm_init()) + return 1; + err = tpm_startup(TPM_ST_CLEAR); + if (err != TPM_INVALID_POSTINIT) + did_first_stage_run = false; + +#ifdef CCDM_AUTO_FIRST_STAGE + if (!did_first_stage_run && first_stage_actions()) + goto failure; +#else + if (!did_first_stage_run) + goto failure; +#endif + + if (hre_run_program(prg_stage2_prepare, sizeof(prg_stage2_prepare))) + goto failure; + + /* run "prepboot" from env to get "mmcdev" set */ + cptr = getenv("prepboot"); + if (cptr && !run_command(cptr, 0)) + mmcdev = getenv("mmcdev"); + if (!mmcdev) + goto failure; + + cptr = getenv("ramdiskimage"); + if (cptr) + image_path = cptr; + + mac_path = malloc(strlen(image_path) + strlen(mac_suffix) + 1); + if (mac_path == NULL) + goto failure; + strcpy(mac_path, image_path); + strcat(mac_path, mac_suffix); + + /* read image from mmcdev (ccdm.itb) */ + image_addr = (ulong)get_image_location(); + if (fs_set_blk_dev("mmc", mmcdev, FS_TYPE_EXT)) + goto failure; + image_size = fs_read(image_path, image_addr, 0, 0); + if (image_size <= 0) + goto failure; + printf("CCDM image found on %s, %d bytes\n", mmcdev, image_size); + + hmac_blob = load_key_chunk("mmc", mmcdev, FS_TYPE_EXT, mac_path); + if (!hmac_blob) { + puts("failed to load mac file\n"); + goto failure; + } + if (verify_program(hmac_blob)) { + puts("corrupted mac file\n"); + goto failure; + } + if (check_hmac(hmac_blob, (u8 *)image_addr, image_size)) { + puts("image integrity could not be verified\n"); + goto failure; + } + puts("CCDM image OK\n"); + + hre_run_program(prg_stage2_success, sizeof(prg_stage2_success)); + + goto end; +failure: + result = 1; + hre_run_program(prg_stage_fail, sizeof(prg_stage_fail)); +end: + if (hmac_blob) + free(hmac_blob); + if (mac_path) + free(mac_path); + + return result; +} +#endif + +int show_self_hash(void) +{ + struct h_reg *hash_ptr; +#ifdef CCDM_SECOND_STAGE + struct h_reg hash; + + hash_ptr = &hash; + if (compute_self_hash(hash_ptr)) + return 1; +#else + hash_ptr = &fix_hregs[FIX_HREG_SELF_HASH]; +#endif + puts("self hash: "); + if (hash_ptr && hash_ptr->valid) + print_buffer(0, hash_ptr->digest, 1, 20, 20); + else + puts("INVALID\n"); + + return 0; +} + +/** + * @brief let the system hang. + * + * Called on error. + * Will stop the boot process; display a message and signal the error condition + * by blinking the "status" and the "finder" LED of the controller board. + * + * @note the develop version runs the blink cycle 2 times and then returns. + * The release version never returns. + */ +static void ccdm_hang(void) +{ + static const u64 f0 = 0x0ba3bb8ba2e880; /* blink code "finder" LED */ + static const u64 s0 = 0x00f0f0f0f0f0f0; /* blink code "status" LED */ + u64 f, s; + int i; +#ifdef CCDM_DEVELOP + int j; +#endif + + I2C_SET_BUS(0); + pca9698_direction_output(0x22, 0, 0); /* Finder */ + pca9698_direction_output(0x22, 4, 0); /* Status */ + + puts("### ERROR ### Please RESET the board ###\n"); + bootstage_error(BOOTSTAGE_ID_NEED_RESET); +#ifdef CCDM_DEVELOP + puts("*** ERROR ******** THIS WOULD HANG ******** ERROR ***\n"); + puts("** but we continue since this is a DEVELOP version **\n"); + puts("*** ERROR ******** THIS WOULD HANG ******** ERROR ***\n"); + for (j = 2; j-- > 0;) { + putc('#'); +#else + for (;;) { +#endif + f = f0; + s = s0; + for (i = 54; i-- > 0;) { + pca9698_set_value(0x22, 0, !(f & 1)); + pca9698_set_value(0x22, 4, (s & 1)); + f >>= 1; + s >>= 1; + mdelay(120); + } + } + puts("\ncontinue...\n"); +} + +int startup_ccdm_id_module(void) +{ + int result = 0; + unsigned int orig_i2c_bus; + + orig_i2c_bus = I2C_GET_BUS(); + I2C_SET_BUS(1); + + /* goto end; */ + +#ifdef CCDM_DEVELOP + show_self_hash(); +#endif +#ifdef CCDM_FIRST_STAGE + result = first_stage_init(); + if (result) { + puts("1st stage init failed\n"); + goto failure; + } +#endif +#ifdef CCDM_SECOND_STAGE + result = second_stage_init(); + if (result) { + puts("2nd stage init failed\n"); + goto failure; + } +#endif + + goto end; +failure: + result = 1; +end: + I2C_SET_BUS(orig_i2c_bus); + if (result) + ccdm_hang(); + + return result; +} diff --git a/board/gdsys/p1022/controlcenterd-id.h b/board/gdsys/p1022/controlcenterd-id.h new file mode 100644 index 0000000000..de4770ac8d --- /dev/null +++ b/board/gdsys/p1022/controlcenterd-id.h @@ -0,0 +1,29 @@ +/* + * (C) Copyright 2013 + * Reinhard Pfau, Guntermann & Drunck GmbH, reinhard.pfau@gdsys.cc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __CONTROLCENTER_ID_H +#define __CONTROLCENTER_ID_H + +int ccdm_compute_self_hash(void); +int startup_ccdm_id_module(void); + +int show_self_hash(void); + +#endif /* __CONTROLCENTER_ID_H */ diff --git a/board/gdsys/p1022/controlcenterd.c b/board/gdsys/p1022/controlcenterd.c new file mode 100644 index 0000000000..81c22bc94c --- /dev/null +++ b/board/gdsys/p1022/controlcenterd.c @@ -0,0 +1,425 @@ +/* + * (C) Copyright 2013 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../common/dp501.h" +#include "controlcenterd-id.h" + +DECLARE_GLOBAL_DATA_PTR; + +enum { + HWVER_100 = 0, + HWVER_110 = 1, + HWVER_120 = 2, +}; + +struct ihs_fpga { + u32 reflection_low; /* 0x0000 */ + u32 versions; /* 0x0004 */ + u32 fpga_version; /* 0x0008 */ + u32 fpga_features; /* 0x000c */ +}; + +#ifndef CONFIG_TRAILBLAZER +static struct pci_device_id hydra_supported[] = { + { 0x6d5e, 0xcdc0 }, + {} +}; + +static void hydra_initialize(void); +#endif + +int board_early_init_f(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); + + /* Reset eLBC_DIU and SPI_eLBC in case we are booting from SD */ + clrsetbits_be32(&gur->pmuxcr, 0x00600000, 0x80000000); + + /* Set pmuxcr to allow both i2c1 and i2c2 */ + setbits_be32(&gur->pmuxcr, 0x00001000); + + /* Set pmuxcr to enable GPIO 3_11-3_13 */ + setbits_be32(&gur->pmuxcr, 0x00000010); + + /* Set pmuxcr to enable GPIO 2_31,3_9+10 */ + setbits_be32(&gur->pmuxcr, 0x00000020); + + /* Set pmuxcr to enable GPIO 2_28-2_30 */ + setbits_be32(&gur->pmuxcr, 0x000000c0); + + /* Set pmuxcr to enable GPIO 3_20-3_22 */ + setbits_be32(&gur->pmuxcr2, 0x03000000); + + /* Set pmuxcr to enable IRQ0-2 */ + clrbits_be32(&gur->pmuxcr, 0x00000300); + + /* Set pmuxcr to disable IRQ3-11 */ + setbits_be32(&gur->pmuxcr, 0x000000F0); + + /* Read back the register to synchronize the write. */ + in_be32(&gur->pmuxcr); + + /* Set the pin muxing to enable ETSEC2. */ + clrbits_be32(&gur->pmuxcr2, 0x001F8000); + +#ifdef CONFIG_TRAILBLAZER + /* + * GPIO3_10 SPERRTRIGGER + */ + setbits_be32(&pgpio->gpdir, 0x00200000); + clrbits_be32(&pgpio->gpdat, 0x00200000); + udelay(100); + setbits_be32(&pgpio->gpdat, 0x00200000); + udelay(100); + clrbits_be32(&pgpio->gpdat, 0x00200000); +#endif + + /* + * GPIO3_11 CPU-TO-FPGA-RESET# + */ + setbits_be32(&pgpio->gpdir, 0x00100000); + clrbits_be32(&pgpio->gpdat, 0x00100000); + + /* + * GPIO3_21 CPU-STATUS-WATCHDOG-TRIGGER# + */ + setbits_be32(&pgpio->gpdir, 0x00000400); + + return 0; +} + +int checkboard(void) +{ + printf("Board: ControlCenter DIGITAL\n"); + + return 0; +} + +int misc_init_r(void) +{ + return 0; +} + +/* + * A list of PCI and SATA slots + */ +enum slot_id { + SLOT_PCIE1 = 1, + SLOT_PCIE2, + SLOT_PCIE3, + SLOT_PCIE4, + SLOT_PCIE5, + SLOT_SATA1, + SLOT_SATA2 +}; + +/* + * This array maps the slot identifiers to their names on the P1022DS board. + */ +static const char * const slot_names[] = { + [SLOT_PCIE1] = "Slot 1", + [SLOT_PCIE2] = "Slot 2", + [SLOT_PCIE3] = "Slot 3", + [SLOT_PCIE4] = "Slot 4", + [SLOT_PCIE5] = "Mini-PCIe", + [SLOT_SATA1] = "SATA 1", + [SLOT_SATA2] = "SATA 2", +}; + +/* + * This array maps a given SERDES configuration and SERDES device to the PCI or + * SATA slot that it connects to. This mapping is hard-coded in the FPGA. + */ +static u8 serdes_dev_slot[][SATA2 + 1] = { + [0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 }, + [0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4, + [PCIE2] = SLOT_PCIE5 }, + [0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, + [PCIE2] = SLOT_PCIE3, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, + [PCIE2] = SLOT_PCIE3 }, + [0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3, + [PCIE2] = SLOT_PCIE3, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x1c] = { [PCIE1] = SLOT_PCIE1, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 }, + [0x1f] = { [PCIE1] = SLOT_PCIE1 }, +}; + + +/* + * Returns the name of the slot to which the PCIe or SATA controller is + * connected + */ +const char *board_serdes_name(enum srds_prtcl device) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + enum slot_id slot = serdes_dev_slot[srds_cfg][device]; + const char *name = slot_names[slot]; + + if (name) + return name; + else + return "Nothing"; +} + +void hw_watchdog_reset(void) +{ + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); + + clrbits_be32(&pgpio->gpdat, 0x00000400); + setbits_be32(&pgpio->gpdat, 0x00000400); +} + +#ifdef CONFIG_TRAILBLAZER +int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int rcode = 0; + + if (run_command(getenv("bootcmd"), flag) < 0) + rcode = 1; + return rcode; +} + +int board_early_init_r(void) +{ + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); + + /* + * GPIO3_12 PPC_SYSTEMREADY# + */ + setbits_be32(&pgpio->gpdir, 0x00080000); + setbits_be32(&pgpio->gpodr, 0x00080000); + clrbits_be32(&pgpio->gpdat, 0x00080000); + + return ccdm_compute_self_hash(); +} + +int last_stage_init(void) +{ + startup_ccdm_id_module(); + return 0; +} + +#else +void pci_init_board(void) +{ + fsl_pcie_init_board(0); + + hydra_initialize(); +} + +int board_early_init_r(void) +{ + unsigned int k = 0; + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); + + /* wait for FPGA configuration to finish */ + while (!pca9698_get_value(0x22, 11) && (k++ < 30)) + udelay(100000); + + if (k > 30) { + puts("FPGA configuration timed out.\n"); + } else { + /* clear FPGA reset */ + udelay(1000); + setbits_be32(&pgpio->gpdat, 0x00100000); + } + + /* give time for PCIe link training */ + udelay(100000); + + /* + * GPIO3_12 PPC_SYSTEMREADY# + */ + setbits_be32(&pgpio->gpdir, 0x00080000); + setbits_be32(&pgpio->gpodr, 0x00080000); + clrbits_be32(&pgpio->gpdat, 0x00080000); + + return 0; +} + +int last_stage_init(void) +{ + /* Turn on Parade DP501 */ + pca9698_direction_output(0x22, 7, 1); + udelay(500000); + + dp501_powerup(0x08); + + startup_ccdm_id_module(); + + return 0; +} + +/* + * Initialize on-board and/or PCI Ethernet devices + * + * Returns: + * <0, error + * 0, no ethernet devices found + * >0, number of ethernet devices initialized + */ +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[2]; + unsigned int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + + return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis); +} + +#ifdef CONFIG_OF_BOARD_SETUP +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_HAS_FSL_DR_USB + fdt_fixup_dr_usb(blob, bd); +#endif + + FT_FSL_PCI_SETUP; +} +#endif + +static void hydra_initialize(void) +{ + unsigned int i; + pci_dev_t devno; + + /* Find and probe all the matching PCI devices */ + for (i = 0; (devno = pci_find_devices(hydra_supported, i)) >= 0; i++) { + u32 val; + struct ihs_fpga *fpga; + u32 versions; + u32 fpga_version; + u32 fpga_features; + + unsigned hardware_version; + unsigned feature_uart_channels; + unsigned feature_sb_channels; + + /* Try to enable I/O accesses and bus-mastering */ + val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + pci_write_config_dword(devno, PCI_COMMAND, val); + + /* Make sure it worked */ + pci_read_config_dword(devno, PCI_COMMAND, &val); + if (!(val & PCI_COMMAND_MEMORY)) { + puts("Can't enable I/O memory\n"); + continue; + } + if (!(val & PCI_COMMAND_MASTER)) { + puts("Can't enable bus-mastering\n"); + continue; + } + + /* read FPGA details */ + fpga = pci_map_bar(devno, PCI_BASE_ADDRESS_0, + PCI_REGION_MEM); + + versions = readl(fpga->versions); + fpga_version = readl(fpga->fpga_version); + fpga_features = readl(fpga->fpga_features); + + hardware_version = versions & 0xf; + feature_uart_channels = (fpga_features >> 6) & 0x1f; + feature_sb_channels = fpga_features & 0x1f; + + printf("FPGA%d: ", i); + + switch (hardware_version) { + case HWVER_100: + printf("HW-Ver 1.00\n"); + break; + + case HWVER_110: + printf("HW-Ver 1.10\n"); + break; + + case HWVER_120: + printf("HW-Ver 1.20\n"); + break; + + default: + printf("HW-Ver %d(not supported)\n", + hardware_version); + break; + } + + printf(" FPGA V %d.%02d, features:", + fpga_version / 100, fpga_version % 100); + + printf(" %d uart channel(s)", feature_uart_channels); + printf(" %d sideband channel(s)\n", feature_sb_channels); + } +} +#endif diff --git a/board/gdsys/p1022/ddr.c b/board/gdsys/p1022/ddr.c new file mode 100644 index 0000000000..4a652de430 --- /dev/null +++ b/board/gdsys/p1022/ddr.c @@ -0,0 +1,71 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan + * Timur Tabi + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include + +#include +#include + +void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + unsigned int i; + + if (ctrl_num) { + printf("Wrong parameter for controller number %d", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* set odt_rd_cfg and odt_wr_cfg. */ + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 1; + } + + popts->clk_adjust = 5; + popts->cpo_override = 0x1f; + popts->write_data_delay = 2; + popts->half_strength_driver_enable = 1; + + /* Per AN4039, enable ZQ calibration. */ + popts->zq_en = 1; +} + +#ifdef CONFIG_SPD_EEPROM +/* + * we only have a "fake" SPD-EEPROM here, which has 16 bit addresses + */ +void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) +{ + int ret = i2c_read(i2c_address, 0, 2, (uchar *)spd, + sizeof(generic_spd_eeprom_t)); + + if (ret) { + if (i2c_address == +#ifdef SPD_EEPROM_ADDRESS + SPD_EEPROM_ADDRESS +#elif defined(SPD_EEPROM_ADDRESS1) + SPD_EEPROM_ADDRESS1 +#endif + ) { + printf("DDR: failed to read SPD from address %u\n", + i2c_address); + } else { + debug("DDR: failed to read SPD from address %u\n", + i2c_address); + } + memset(spd, 0, sizeof(generic_spd_eeprom_t)); + } +} +#endif diff --git a/board/gdsys/p1022/diu.c b/board/gdsys/p1022/diu.c new file mode 100644 index 0000000000..52ac1e6ecc --- /dev/null +++ b/board/gdsys/p1022/diu.c @@ -0,0 +1,87 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Authors: Timur Tabi + * + * FSL DIU Framebuffer driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define PMUXCR_ELBCDIU_MASK 0xc0000000 +#define PMUXCR_ELBCDIU_NOR16 0x80000000 +#define PMUXCR_ELBCDIU_DIU 0x40000000 + +/* + * DIU Area Descriptor + * + * Note that we need to byte-swap the value before it's written to the AD + * register. So even though the registers don't look like they're in the same + * bit positions as they are on the MPC8610, the same value is written to the + * AD register on the MPC8610 and on the P1022. + */ +#define AD_BYTE_F 0x10000000 +#define AD_ALPHA_C_SHIFT 25 +#define AD_BLUE_C_SHIFT 23 +#define AD_GREEN_C_SHIFT 21 +#define AD_RED_C_SHIFT 19 +#define AD_PIXEL_S_SHIFT 16 +#define AD_COMP_3_SHIFT 12 +#define AD_COMP_2_SHIFT 8 +#define AD_COMP_1_SHIFT 4 +#define AD_COMP_0_SHIFT 0 + +/* + * Variables used by the DIU/LBC switching code. It's safe to makes these + * global, because the DIU requires DDR, so we'll only run this code after + * relocation. + */ +static u32 pmuxcr; + +void diu_set_pixel_clock(unsigned int pixclock) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + unsigned long speed_ccb, temp; + u32 pixval; + + speed_ccb = get_bus_freq(0); + temp = 1000000000 / pixclock; + temp *= 1000; + pixval = speed_ccb / temp; + debug("DIU pixval = %u\n", pixval); + + /* Modify PXCLK in GUTS CLKDVDR */ + temp = in_be32(&gur->clkdvdr) & 0x2000FFFF; + out_be32(&gur->clkdvdr, temp); /* turn off clock */ + out_be32(&gur->clkdvdr, temp | 0x80000000 | ((pixval & 0x1F) << 16)); +} + +int platform_diu_init(unsigned int xres, unsigned int yres, const char *port) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pixel_format; + + pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) | + (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) | + (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) | + (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) | + (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT)); + + printf("DIU: Switching to %ux%u\n", xres, yres); + + /* Set PMUXCR to switch the muxed pins from the LBC to the DIU */ + clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU); + pmuxcr = in_be32(&gur->pmuxcr); + + return fsl_diu_init(xres, yres, pixel_format, 0); +} diff --git a/board/gdsys/p1022/law.c b/board/gdsys/p1022/law.c new file mode 100644 index 0000000000..96f38f7c6f --- /dev/null +++ b/board/gdsys/p1022/law.c @@ -0,0 +1,20 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan + * Timur Tabi + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_ELBC_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/gdsys/p1022/sdhc_boot.c b/board/gdsys/p1022/sdhc_boot.c new file mode 100644 index 0000000000..e4323181fc --- /dev/null +++ b/board/gdsys/p1022/sdhc_boot.c @@ -0,0 +1,63 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * The environment variables are written to just after the u-boot image + * on SDCard, so we must read the MBR to get the start address and code + * length of the u-boot image, then calculate the address of the env. + */ +#define ESDHC_BOOT_IMAGE_SIZE 0x48 +#define ESDHC_BOOT_IMAGE_ADDR 0x50 + +int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) +{ + u8 *tmp_buf; + u32 blklen, code_offset, code_len, n; + + blklen = mmc->read_bl_len; + tmp_buf = malloc(blklen); + if (!tmp_buf) + return 1; + + /* read out the first block, get the config data information */ + n = mmc->block_dev.block_read(mmc->block_dev.dev, 0, 1, tmp_buf); + if (!n) { + free(tmp_buf); + return 1; + } + + /* Get the Source Address, from offset 0x50 */ + code_offset = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_ADDR); + + /* Get the code size from offset 0x48 */ + code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE); + + *env_addr = code_offset + code_len; + + free(tmp_buf); + + return 0; +} diff --git a/board/gdsys/p1022/tlb.c b/board/gdsys/p1022/tlb.c new file mode 100644 index 0000000000..9cad692783 --- /dev/null +++ b/board/gdsys/p1022/tlb.c @@ -0,0 +1,77 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan + * Timur Tabi + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + + /* *I*G* - eLBC */ + SET_TLB_ENTRY(1, CONFIG_SYS_ELBC_BASE, CONFIG_SYS_ELBC_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_1M, 1), + +#if defined(CONFIG_TRAILBLAZER) + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 9, BOOKE_PAGESZ_256K, 1), +#else + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256K, 1), + +#ifdef CONFIG_SYS_RAMBOOT + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 6, BOOKE_PAGESZ_1G, 1), +#endif +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/boards.cfg b/boards.cfg index 4e556e0b03..6a368de800 100644 --- a/boards.cfg +++ b/boards.cfg @@ -914,6 +914,10 @@ BSC9132QDS_SDCARD_DDRCLK100 powerpc mpc85xx bsc9132qds freesca BSC9132QDS_SDCARD_DDRCLK133 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133 BSC9132QDS_SPIFLASH_DDRCLK100 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100 BSC9132QDS_SPIFLASH_DDRCLK133 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133 +controlcenterd_36BIT_SDCARD powerpc mpc85xx p1022 gdsys - controlcenterd:36BIT,SDCARD +controlcenterd_36BIT_SDCARD_DEVELOP powerpc mpc85xx p1022 gdsys - controlcenterd:36BIT,SDCARD,DEVELOP +controlcenterd_TRAILBLAZER powerpc mpc85xx p1022 gdsys - controlcenterd:TRAILBLAZER,SPIFLASH +controlcenterd_TRAILBLAZER_DEVELOP powerpc mpc85xx p1022 gdsys - controlcenterd:TRAILBLAZER,SPIFLASH,DEVELOP stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h new file mode 100644 index 0000000000..cdd79f0769 --- /dev/null +++ b/include/configs/controlcenterd.h @@ -0,0 +1,522 @@ +/* + * (C) Copyright 2013 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * based on P1022DS.h + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#ifdef CONFIG_36BIT +#define CONFIG_PHYS_64BIT +#endif + +#ifdef CONFIG_SDCARD +#define CONFIG_RAMBOOT_SDCARD +#endif + +#ifdef CONFIG_SPIFLASH +#define CONFIG_RAMBOOT_SPIFLASH +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE /* BOOKE */ +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ +#define CONFIG_P1022 +#define CONFIG_CONTROLCENTERD +#define CONFIG_MP /* support multiple processors */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENABLE_36BIT_PHYS +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#ifdef CONFIG_TRAILBLAZER +#define CONFIG_IDENT_STRING " controlcenterd trailblazer 0.01" +#else +#define CONFIG_IDENT_STRING " controlcenterd 0.01" +#endif + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ +#endif + +#define CONFIG_L2_CACHE +#define CONFIG_BTB + +#define CONFIG_SYS_CLK_FREQ 66666600 +#define CONFIG_DDR_CLK_FREQ 66666600 + +#define CONFIG_SYS_RAMBOOT + +#ifdef CONFIG_TRAILBLAZER + +#define CONFIG_SYS_TEXT_BASE 0xf8fc0000 +#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) + +/* + * Config the L2 Cache + */ +#define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull +#else +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#endif +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) + +#else /* CONFIG_TRAILBLAZER */ + +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) + +#endif /* CONFIG_TRAILBLAZER */ + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) + + +/* + * Memory map + * + * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable + * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable + * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable + * + * Localbus non-cacheable + * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable + * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable + * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 + * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable + */ + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#ifdef CONFIG_TRAILBLAZER +/* leave CCSRBAR at default, because u-boot expects it to be exactly there */ +#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT +#else +#define CONFIG_SYS_CCSRBAR 0xffe00000 +#endif +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) + +/* + * DDR Setup + */ + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE 1024 +#define CONFIG_VERY_BIG_RAM + +#define CONFIG_FSL_DDR3 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) + +#define CONFIG_SYS_MEMTEST_START 0x00000000 +#define CONFIG_SYS_MEMTEST_END 0x3fffffff + +#ifdef CONFIG_TRAILBLAZER +#define CONFIG_SPD_EEPROM +#define SPD_EEPROM_ADDRESS 0x52 +/*#define CONFIG_FSL_DDR_INTERACTIVE*/ +#endif + +/* + * Local Bus Definitions + */ +#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ + +#define CONFIG_SYS_ELBC_BASE 0xe0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull +#else +#define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE +#endif + +#define CONFIG_UART_BR_PRELIM \ + (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) +#define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) + +#define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ +#define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ + +#define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM +#define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 2 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* + * I2C + */ +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_CMD_I2C + +#define CONFIG_FSL_I2C +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +/* Probing DP501 I2C-Bridge will hang */ +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x30}, {0, 0x37}, {0, 0x3a}, \ + {0, 0x3b}, {0, 0x50} } + +#define CONFIG_PCA9698 /* NXP PCA9698 */ + +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +#ifndef CONFIG_TRAILBLAZER +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_HARD_SPI +#define CONFIG_FSL_ESPI + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO + +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 +#endif + +/* + * TPM + */ +#define CONFIG_TPM_ATMEL_TWI +#define CONFIG_TPM +#define CONFIG_TPM_AUTH_SESSIONS +#define CONFIG_SHA1 +#define CONFIG_CMD_TPM + +/* + * MMC + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_MMC + +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR + + +#ifndef CONFIG_TRAILBLAZER + +/* + * Video + */ +#define CONFIG_FSL_DIU_FB +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_CMD_BMP + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ +#define CONFIG_CMD_PCI + +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ + +#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 +#endif +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull +#else +#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 +#endif +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA + +#define CONFIG_FSL_SATA +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +/* + * Ethernet + */ +#define CONFIG_TSEC_ENET + +#define CONFIG_TSECV2 + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" + +#define TSEC1_PHY_ADDR 0 +#define TSEC2_PHY_ADDR 1 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ + +/* + * USB + */ +#define CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE + +#define CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET + +#endif /* CONFIG_TRAILBLAZER */ + +/* + * Environment + */ +#if defined(CONFIG_TRAILBLAZER) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#undef CONFIG_CMD_SAVEENV +#elif defined(CONFIG_RAMBOOT_SPIFLASH) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_RAMBOOT_SDCARD) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_FSL_FIXED_MMC_LOCATION +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +#define CONFIG_SYS_EXTRA_ENV_RELOC + +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* + * Command line configuration. + */ +#ifndef CONFIG_TRAILBLAZER +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#endif /* CONFIG_TRAILBLAZER */ + +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#include + +#ifndef CONFIG_TRAILBLAZER + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO + +/* + * Board initialisation callbacks + */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R +#define CONFIG_LAST_STAGE_INIT + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE + +#else /* CONFIG_TRAILBLAZER */ + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_LAST_STAGE_INIT +#undef CONFIG_CMD_BOOTM + +#endif /* CONFIG_TRAILBLAZER */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_HZ 1000 +#define CONFIG_HW_WATCHDOG +#define CONFIG_LOADS_ECHO +#define CONFIG_SYS_LOADS_BAUD_CHANGE +#define CONFIG_DOS_PARTITION + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* + * Environment Configuration + */ + +#ifdef CONFIG_TRAILBLAZER + +#define CONFIG_BOOTDELAY 0 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mp_holdoff=1\0" + +#else + +#define CONFIG_HOSTNAME controlcenterd +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ + +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS1\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=rootfs.ext2.gz.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=controlcenterd.dtb\0" \ + "bdev=sda3\0" + +/* these are used and NUL-terminated in env_default.h */ +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + +#endif /* CONFIG_TRAILBLAZER */ + +#endif