From: ng0 Date: Tue, 17 Oct 2017 16:35:38 +0000 (+0000) Subject: doc: installation: some @code->@example changes X-Git-Tag: gnunet-0.11.0rc0~101^2~54 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=b95bd7b268372f5ba7fab90194d1c5b16f481a63;p=oweals%2Fgnunet.git doc: installation: some @code->@example changes --- diff --git a/doc/chapters/installation.texi b/doc/chapters/installation.texi index 2fc790e3e..1fbe20892 100644 --- a/doc/chapters/installation.texi +++ b/doc/chapters/installation.texi @@ -187,10 +187,12 @@ dependencies (ideally in this order): @item libnettle and libunbound (possibly from distribution), GnuTLS @item libgnurl (read the README) @item GNU libmicrohttpd -@item GNU libextractor (make sure to first install the various mandatory and optional -dependencies including development headers from your distribution) +@item GNU libextractor @end itemize +Make sure to first install the various mandatory and optional +dependencies including development headers from your distribution. + Other dependencies that you should strongly consider to install is a database (MySQL, sqlite or Postgres). The following instructions will assume that you installed at least sqlite. For most distributions you should be able @@ -246,9 +248,9 @@ If you want to be able to enable DEBUG-level log messages, add DEBUG-level log messages are in English-only and should only be useful for developers (or for filing really detailed bug reports). -Finally, you probably want to compile @code{gnunet-gtk}, which includes gnunet-setup -(graphical tool for configuration) and @code{gnunet-fs-gtk} (graphical tool for -file-sharing):@ +Finally, you probably want to compile @code{gnunet-gtk}, which +includes gnunet-setup (graphical tool for configuration) +and @code{gnunet-fs-gtk} (graphical tool for file-sharing): @example $ tar xvf gnunet-gtk-0.10.?.tar.gz @@ -262,52 +264,46 @@ $ sudo ldconfig # just to be safe Next, edit the file @file{/etc/gnunet.conf} to contain the following: -@code{@ - [arm]@ - SYSTEM_ONLY = YES@ - USER_ONLY = NO@ -}@ -You may need to update your ld.so cache to include files installed in -@file{/usr/local/lib}:@ +@example +[arm] +SYSTEM_ONLY = YES +USER_ONLY = NO +@end example -@code{@ - # ldconfig@ -}@ +You may need to update your ld.so cache to include files installed in +@file{/usr/local/lib}: @code{ # ldconfig }. -Then, switch from user root to user gnunet to start the peer:@ +Then, switch from user root to user gnunet to start the peer: -@code{@ - # su -s /bin/sh - gnunet@ - $ gnunet-arm -c /etc/gnunet.conf -s@ -}@ +@example +# su -s /bin/sh - gnunet +$ gnunet-arm -c /etc/gnunet.conf -s +@end example You may also want to add the last line in the gnunet users @file{crontab} prefixed with @code{@@reboot} so that it is executed whenever the system is -booted:@ +booted: -@code{@ - @@reboot /usr/local/bin/gnunet-arm -c /etc/gnunet.conf -s@ -}@ +@example +@@reboot /usr/local/bin/gnunet-arm -c /etc/gnunet.conf -s@ +@end example This will only start the system-wide GNUnet services. Type exit to get back your root shell. Now, you need to configure the per-user part. For each -$USER on the system, run:@ +$USER on the system, run: @code{ # adduser $USER gnunet }. -@code{@ - # adduser $USER gnunet@ -}@ - -to allow them to access the system-wide GNUnet services. Then, each user should -create a configuration file @file{~/.config/gnunet.conf} with the lines:@ +to allow them to access the system-wide GNUnet services. Then, each +user should create a configuration file @file{~/.config/gnunet.conf} +with the lines: -@code{@ - [arm]@ - SYSTEM_ONLY = NO@ - USER_ONLY = YES@ - DEFAULTSERVICES = gns@ -}@ +@example +[arm] +SYSTEM_ONLY = NO +USER_ONLY = YES +DEFAULTSERVICES = gns +@end example -and start the per-user services using@ +and start the per-user services using @code{@ $ gnunet-arm -c ~/.config/gnunet.conf -s@ @@ -342,6 +338,7 @@ hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 The exact details may differ a bit, which is fine. Add the text @emph{"gns [NOTFOUND=return]"} after @emph{"files"}: + @example hosts: files gns [NOTFOUND=return] mdns4_minimal [NOTFOUND=return] dns mdns4 @end example @@ -472,9 +469,10 @@ $ sudo make install ; cd .. Install libextractor dependencies: @example -$ sudo apt-get install zlib1g-dev libgsf-1-dev libmpeg2-4-dev libpoppler-dev \ - libvorbis-dev libexiv2-dev libjpeg-dev libtiff-dev libgif-dev libvorbis-dev \ - libflac-dev libsmf-dev g++@ +$ sudo apt-get install zlib1g-dev libgsf-1-dev libmpeg2-4-dev \ + libpoppler-dev libvorbis-dev libexiv2-dev libjpeg-dev \ + libtiff-dev libgif-dev libvorbis-dev libflac-dev libsmf-dev \ + g++ @end example Build libextractor: @@ -492,7 +490,7 @@ $ sudo make install ; cd .. @example $ sudo apt-get install libidn11-dev libunistring-dev libglpk-dev \ - libpulse-dev libbluetooth-dev libsqlite-dev@ + libpulse-dev libbluetooth-dev libsqlite-dev @end example Install libopus: @@ -940,34 +938,40 @@ directory. We begin by downloading all dependencies, then extracting the sources, and finally compiling and installing the libraries:@ @example - $ wget https://libav.org/releases/libav-9.10.tar.xz@ - $ wget http://ftp.gnu.org/gnu/libextractor/libextractor-1.3.tar.gz@ - $ wget ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.12.tar.bz2@ - $ wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.6.0.tar.bz2@ - $ wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.2/gnutls-3.2.7.tar.xz@ - $ wget http://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.33.tar.gz@ - $ wget https://gnunet.org/sites/default/files/gnurl-7.34.0.tar.bz2@ - $ tar xvf libextractor-1.3.tar.gz@ - $ tar xvf libgpg-error-1.12.tar.bz2@ - $ tar xvf libgcrypt-1.6.0.tar.bz2@ - $ tar xvf gnutls-3.2.7.tar.xz@ - $ tar xvf libmicrohttpd-0.9.33.tar.gz@ - $ tar xvf gnurl-7.34.0.tar.bz2@ - $ cd libav-0.9 ; ./configure --enable-shared; make; sudo make install ; cd ..@ - $ cd libextractor-1.3 ; ./configure; make ; sudo make install; cd ..@ - $ cd libgpg-error-1.12; ./configure ; make ; sudo make install ; cd ..@ - $ cd libgcrypt-1.6.0; ./configure --with-gpg-error-prefix=/usr/local; make ; sudo make install ; cd ..@ - $ cd gnutls-3.2.7 ; ./configure ; make ; sudo make install ; cd ..@ - $ cd libmicrohttpd-0.9.33; ./configure ; make ; sudo make install ; cd ..@ - $ cd gnurl-7.34.0@ - $ ./configure --enable-ipv6 --with-gnutls=/usr/local --without-libssh2 \ - --without-libmetalink --without-winidn --without-librtmp --without-nghttp2 \ - --without-nss --without-cyassl --without-polarssl --without-ssl \ - --without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb \ - --disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp \ - --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file \ - --disable-ftp@ - $ make ; sudo make install; cd ..@ +$ wget https://libav.org/releases/libav-9.10.tar.xz +$ wget http://ftp.gnu.org/gnu/libextractor/libextractor-1.3.tar.gz +$ wget ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.12.tar.bz2 +$ wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.6.0.tar.bz2 +$ wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.2/gnutls-3.2.7.tar.xz +$ wget http://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.33.tar.gz +$ wget https://gnunet.org/sites/default/files/gnurl-7.34.0.tar.bz2 +$ tar xvf libextractor-1.3.tar.gz +$ tar xvf libgpg-error-1.12.tar.bz2 +$ tar xvf libgcrypt-1.6.0.tar.bz2 +$ tar xvf gnutls-3.2.7.tar.xz +$ tar xvf libmicrohttpd-0.9.33.tar.gz +$ tar xvf gnurl-7.34.0.tar.bz2 +$ cd libav-0.9 ; ./configure --enable-shared; +$ make; sudo make install; cd .. +$ cd libextractor-1.3 ; ./configure; +$ make ; sudo make install; cd .. +$ cd libgpg-error-1.12; ./configure; +$ make ; sudo make install; cd .. +$ cd libgcrypt-1.6.0; ./configure --with-gpg-error-prefix=/usr/local; +$ make ; sudo make install ; cd .. +$ cd gnutls-3.2.7 ; ./configure; +$ make ; sudo make install ; cd .. +$ cd libmicrohttpd-0.9.33; ./configure; +$ make ; sudo make install ; cd .. +$ cd gnurl-7.34.0 +$ ./configure --enable-ipv6 --with-gnutls=/usr/local --without-libssh2 \ + --without-libmetalink --without-winidn --without-librtmp --without-nghttp2 \ + --without-nss --without-cyassl --without-polarssl --without-ssl \ + --without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb \ + --disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp \ + --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file \ + --disable-ftp +$ make ; sudo make install; cd .. @end example @node Installing GNUnet from source @@ -993,68 +997,72 @@ performance and Postgres better resillience. @section Installing GNUnet from Git on Ubuntu 14.4 @strong{Install the required build tools:} -@code{@ - $ sudo apt-get install git automake autopoint autoconf@ -} +@code{ $ sudo apt-get install git automake autopoint autoconf } @strong{Install the required dependencies} @example $ sudo apt-get install libltdl-dev libgpg-error-dev libidn11-dev \ - libunistring-dev libglpk-dev libbluetooth-dev libextractor-dev \ - libmicrohttpd-dev libgnutls28-dev + libunistring-dev libglpk-dev libbluetooth-dev libextractor-dev \ + libmicrohttpd-dev libgnutls28-dev @end example -@strong{Choose one or more database backends}@ - SQLite3@ -@code{@ - $ sudo apt-get install libsqlite3-dev@ -}@ - MySQL@ -@code{@ - $ sudo apt-get install libmysqlclient-dev@ -}@ - PostgreSQL@ -@code{@ - $ sudo apt-get install libpq-dev postgresql@ -} +@strong{Choose one or more database backends} -@strong{Install the optional dependencies for gnunet-conversation:}@ -@code{@ - $ sudo apt-get install gstreamer1.0 libpulse-dev libopus-dev@ -} +SQLite3: +@example +$ sudo apt-get install libsqlite3-dev +@end example +MySQL: +@example +$ sudo apt-get install libmysqlclient-dev +@end example +PostgreSQL: +@example +$ sudo apt-get install libpq-dev postgresql +@end example + +@strong{Install the optional dependencies for gnunet-conversation:} -@strong{Install the libgrypt 1.6.1:}@ - For Ubuntu 14.04:@ -@code{$ sudo apt-get install libgcrypt20-dev}@ - For Ubuntu older 14.04:@ -@code{$ wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.6.1.tar.bz2@ - $ tar xf libgcrypt-1.6.1.tar.bz2@ - $ cd libgcrypt-1.6.1@ - $ ./configure@ - $ sudo make install@ - $ cd ..}@ -@strong{Install libgnurl}@ @example - $ wget https://gnunet.org/sites/default/files/gnurl-7.35.0.tar.bz2@ - $ tar xf gnurl-7.35.0.tar.bz2@ - $ cd gnurl-7.35.0@ - $ ./configure --enable-ipv6 --with-gnutls --without-libssh2 \ +$ sudo apt-get install gstreamer1.0 libpulse-dev libopus-dev +@end example + +@strong{Install the libgrypt 1.6.1:} +For Ubuntu 14.04: +@example +$ sudo apt-get install libgcrypt20-dev +@end example +For Ubuntu older 14.04: +@example +$ wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.6.1.tar.bz2 +$ tar xf libgcrypt-1.6.1.tar.bz2 +$ cd libgcrypt-1.6.1 +$ ./configure +$ sudo make install +$ cd .. +@end example +@strong{Install libgnurl} +@example +$ wget https://gnunet.org/sites/default/files/gnurl-7.35.0.tar.bz2 +$ tar xf gnurl-7.35.0.tar.bz2 +$ cd gnurl-7.35.0 +$ ./configure --enable-ipv6 --with-gnutls --without-libssh2 \ --without-libmetalink --without-winidn --without-librtmp --without-nghttp2 \ --without-nss --without-cyassl --without-polarssl --without-ssl \ --without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb \ --disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp \ --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file \ --disable-ftp - $ sudo make install@ - $ cd ..@ +$ sudo make install +$ cd .. @end example -@strong{Install GNUnet}@ -@code{@ - $ git clone https://gnunet.org/git/gnunet/@ - $ cd gnunet/@ - $ ./bootstrap@ -} +@strong{Install GNUnet} +@example +$ git clone https://gnunet.org/git/gnunet/ +$ cd gnunet/ +$ ./bootstrap +@end example If you want to: @itemize @bullet