From: Christopher Howard Date: Fri, 5 Jan 2018 17:12:05 +0000 (-0900) Subject: Moves a misplaced image in Bridge Mode doc X-Git-Tag: v1.4.3~43^2~2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=b8aefca293a2bd082769bbe48de6ceaa279d8182;p=librecmc%2Flibrecmc.git Moves a misplaced image in Bridge Mode doc --- diff --git a/docs/Bridge_Mode.md b/docs/Bridge_Mode.md index ac55440602..9f29c59105 100644 --- a/docs/Bridge_Mode.md +++ b/docs/Bridge_Mode.md @@ -21,9 +21,6 @@ Place a checkmark in the box for the "eth0" interface for wan and wan6. (I suppose the interface name might vary amongst different routers.) -![alt text](images/librecmc-eth0-added-to-lan.png "Adjustments to - LibreCMC interface physical settings") - You can also check the box for Enable STP if desired. There doesn't seem to be any downside from this, though I suppose it would use a little more CPU cycles and memory. STP is a protocol intended to @@ -35,7 +32,8 @@ layer 2 switches. On the same page, scroll down a little to the DHCP Server section. In the General Setup tab, check the "Ignore interface" box. -![alt text](images/librecmc-switch-lan-to-dhcp.png) +![alt text](images/librecmc-eth0-added-to-lan.png "Adjustments to + LibreCMC interface physical settings") Save and apply your changes. @@ -59,6 +57,8 @@ the DHCP client on the WAN interface.) Of course, if you do this, be sure that your DHCP server has reserved a memorable IP address for the LibreCMC device's MAC address, so you don't have trouble finding it. +![alt text](images/librecmc-switch-lan-to-dhcp.png) + ## Adjusting the firewall...? To make a more consistent look in the your LibreCMC interface, you