From: Derald D. Woods Date: Mon, 26 Feb 2018 23:52:59 +0000 (-0600) Subject: ARM: omap3: evm: Sync with omap3_beagle configuration X-Git-Tag: v2018.05-rc1~102 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=b6e2543cf9a86ad651c00b870d5048087ff626cd;p=oweals%2Fu-boot.git ARM: omap3: evm: Sync with omap3_beagle configuration This commit does the following for OMAP3 EVM: - Track omap3_beagle changes where possible - Remove CONFIG_SYS_MPUCLK and CONFIG_MTD which are not needed for the default board configuration to work. - Remove CONFIG_SPL_SYS_MALLOC_SIMPLE and CONFIG_SYS_MALLOC_F_LEN from default config. CONFIG_SYS_MALLOC_F_LEN=0x400 is set by configuration automatically. [allows board to boot with SERIAL_SEARCH_ALL=y] - Use updated NAND layout: device nand0 , # parts = 6 #: name size offset ------------------------------------------------- 0: spl 0x00080000(512k) 0x00000000 1: u-boot 0x001e0000(1920k) 0x00080000 2: u-boot-env 0x00020000(128k) 0x00260000 3: dtb 0x00020000(128k) 0x00280000 4: kernel 0x00600000(6m) 0x002a0000 5: rootfs 0x0f760000(-) 0x008a0000 ------------------------------------------------- Signed-off-by: Derald D. Woods --- diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index 34998777a0..55fc944d21 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -1,22 +1,22 @@ CONFIG_ARM=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_SYS_TEXT_BASE=0x80100000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SYS_MPUCLK=720 CONFIG_TARGET_OMAP3_EVM=y CONFIG_DEFAULT_DEVICE_TREE="omap3-evm" CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_ENV_SUPPORT=y # CONFIG_SPL_EXT_SUPPORT is not set CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_OS_BOOT=y CONFIG_SYS_PROMPT="OMAP3_EVM # " -# CONFIG_CMD_IMI is not set +CONFIG_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x82000000 +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x280000 +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y @@ -30,7 +30,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FS_UUID=y CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1792k(u-boot),128k(dtb),128k(u-boot-env),6m(kernel),-(rootfs)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)" CONFIG_CMD_UBI=y # CONFIG_ISO_PARTITION is not set # CONFIG_EFI_PARTITION is not set @@ -39,14 +39,16 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SPL_DM=y CONFIG_MMC_OMAP_HS=y -CONFIG_MTD=y CONFIG_NAND=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 CONFIG_SPL_NAND_SIMPLE=y CONFIG_NETDEVICES=y CONFIG_SMC911X=y CONFIG_SMC911X_BASE=0x2C000000 CONFIG_SMC911X_32_BIT=y +CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y CONFIG_USB=y @@ -54,14 +56,13 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_OMAP3=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 CONFIG_USB_GADGET_PRODUCT_NUM=0x5678 -CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_ETHER=y CONFIG_FAT_WRITE=y CONFIG_BCH=y -CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_SPL_OF_LIBFDT=y # CONFIG_EFI_LOADER is not set diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 1392593b9d..36bf51a1c0 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -54,51 +54,58 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_SYS_ENV_SECT_SIZE SZ_128K #define CONFIG_ENV_OFFSET 0x260000 #define CONFIG_ENV_ADDR 0x260000 #define CONFIG_ENV_OVERWRITE #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ /* NAND: SPL falcon mode configs */ #if defined(CONFIG_SPL_OS_BOOT) -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000 #endif /* CONFIG_SPL_OS_BOOT */ #endif /* CONFIG_NAND */ -/* MUSB */ - -/* USB EHCI */ -#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 - /* Environment */ +#define CONFIG_ENV_SIZE SZ_128K + #define CONFIG_PREBOOT "usb start" #define MEM_LAYOUT_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV -#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "run nandboot\0" -#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ - #devtypel #instance " " - #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ "bootcmd_" #devtypel #instance "=" \ "setenv mmcdev " #instance "; " \ - "setenv bootpart " #instance ":${mmcpart} ; " \ "run mmcboot\0" #define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ #devtypel #instance " " +#if defined(CONFIG_NAND) + +#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ + "bootcmd_" #devtypel #instance "=" \ + "if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \ + "echo NAND boot disabled: No mtdids and/or mtdparts; " \ + "else " \ + "run nandboot; " \ + "fi\0" +#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ + #devtypel #instance " " + #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(LEGACY_MMC, legacy_mmc, 0) \ func(UBIFS, ubifs, 0) \ func(NAND, nand, 0) +#else /* !CONFIG_NAND */ + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(LEGACY_MMC, legacy_mmc, 0) + +#endif /* CONFIG_NAND */ + #include #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -107,31 +114,29 @@ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "fdt_high=0xffffffff\0" \ + "console=ttyO0,115200n8\0" \ "bootdir=/boot\0" \ "bootenv=uEnv.txt\0" \ "bootfile=zImage\0" \ + "bootpart=0:2\0" \ "bootubivol=rootfs\0" \ "bootubipart=rootfs\0" \ "optargs=\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ - "bootpart=${mmcdev}:${mmcpart}\0" \ - "console=ttyO0,115200n8\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext4 rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ "${mtdparts} " \ "${optargs} " \ - "root=/dev/mmcblk0p2 rw " \ - "rootfstype=ext4 rootwait\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${optargs} " \ - "root=ubi0:rootfs rw ubi.mtd=rootfs noinitrd " \ - "rootfstype=ubifs rootwait\0" \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ + "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ "env import -t ${loadaddr} ${filesize}\0" \ - "mmcbootenv=mmc dev ${mmcdev}; " \ + "mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \ + "mmc dev ${mmcdev}; " \ "if mmc rescan; then " \ "run loadbootenv && run importbootenv; " \ "run ext4bootenv && run importbootenv; " \ @@ -153,8 +158,14 @@ "bootz ${loadaddr} - ${fdtaddr}; " \ "fi; " \ "fi\0" \ - "nandboot=" \ - "if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \ + "nandroot=ubi0:rootfs ubi.mtd=rootfs rw noinitrd\0" \ + "nandrootfstype=ubifs rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${mtdparts} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \ "echo Booting uImage from NAND MTD 'kernel' partition ...; " \ "run nandargs; " \ "bootm ${loadaddr} - ${fdtaddr}; " \