From: Marek Vasut Date: Thu, 1 Dec 2016 01:06:33 +0000 (+0100) Subject: mmc: Tinification of the mmc code X-Git-Tag: v2017.01-rc1~149 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=b5b838f1a726e9ab7eea505740e8169b55e90ed6;p=oweals%2Fu-boot.git mmc: Tinification of the mmc code Add new configuration option CONFIG_MMC_TINY which strips away all memory allocation within the MMC code and code for handling multiple cards. This allows extremely space-constrained SPL code use the MMC framework. Reviewed-by: Simon Glass Signed-off-by: Marek Vasut Cc: Tom Rini Cc: Jaehoon Chung --- diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index a3d6b36cb4..7dfcd0ba2a 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -306,7 +306,11 @@ static int spl_mmc_load_image(struct spl_image_info *spl_image, if (part == 7) part = 0; - err = blk_dselect_hwpart(mmc_get_blk_desc(mmc), part); + if (CONFIG_IS_ENABLED(MMC_TINY)) + err = mmc_switch_part(mmc, part); + else + err = blk_dselect_hwpart(mmc_get_blk_desc(mmc), part); + if (err) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT puts("spl: mmc partition switch failed\n"); diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 24f4b285a9..5e84a41491 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -26,6 +26,21 @@ config DM_MMC_OPS option will be removed as soon as all DM_MMC drivers use it, as it will the only supported behaviour. +config SPL_MMC_TINY + bool "Tiny MMC framework in SPL" + help + Enable MMC framework tinification support. This option is useful if + if your SPL is extremely size constrained. Heed the warning, enable + this option if and only if you know exactly what you are doing, if + you are reading this help text, you most likely have no idea :-) + + The MMC framework is reduced to bare minimum to be useful. No malloc + support is needed for the MMC framework operation with this option + enabled. The framework supports exactly one MMC device and exactly + one MMC driver. The MMC driver can be adjusted to avoid any malloc + operations too, which can remove the need for malloc support in SPL + and thus further reduce footprint. + config MSM_SDHCI bool "Qualcomm SDHCI controller" depends on DM_MMC && BLK && DM_MMC_OPS diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 6a19bbf504..9f8368a123 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -30,6 +30,29 @@ static const unsigned int sd_au_size[] = { SZ_16M / 512, (SZ_16M + SZ_8M) / 512, SZ_32M / 512, SZ_64M / 512, }; +#if CONFIG_IS_ENABLED(MMC_TINY) +static struct mmc mmc_static; +struct mmc *find_mmc_device(int dev_num) +{ + return &mmc_static; +} + +void mmc_do_preinit(void) +{ + struct mmc *m = &mmc_static; +#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT + mmc_set_preinit(m, 1); +#endif + if (m->preinit) + mmc_start_init(m); +} + +struct blk_desc *mmc_get_blk_desc(struct mmc *mmc) +{ + return &mmc->block_dev; +} +#endif + #ifndef CONFIG_DM_MMC_OPS __weak int board_mmc_getwp(struct mmc *mmc) { @@ -259,7 +282,11 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt, if (!mmc) return 0; - err = blk_dselect_hwpart(block_dev, block_dev->hwpart); + if (CONFIG_IS_ENABLED(MMC_TINY)) + err = mmc_switch_part(mmc, block_dev->hwpart); + else + err = blk_dselect_hwpart(block_dev, block_dev->hwpart); + if (err < 0) return 0; @@ -1804,7 +1831,9 @@ int mmc_initialize(bd_t *bis) initialized = 1; #ifndef CONFIG_BLK +#if !CONFIG_IS_ENABLED(MMC_TINY) mmc_list_init(); +#endif #endif ret = mmc_probe(bis); if (ret) diff --git a/drivers/mmc/mmc_legacy.c b/drivers/mmc/mmc_legacy.c index 25361d10f6..bdf9d984dd 100644 --- a/drivers/mmc/mmc_legacy.c +++ b/drivers/mmc/mmc_legacy.c @@ -13,6 +13,7 @@ static struct list_head mmc_devices; static int cur_dev_num = -1; +#if !CONFIG_IS_ENABLED(MMC_TINY) struct mmc *find_mmc_device(int dev_num) { struct mmc *m; @@ -62,6 +63,7 @@ void mmc_do_preinit(void) mmc_start_init(m); } } +#endif void mmc_list_init(void) { @@ -109,6 +111,35 @@ void print_mmc_devices(char separator) void print_mmc_devices(char separator) { } #endif +#if CONFIG_IS_ENABLED(MMC_TINY) +static struct mmc mmc_static = { + .dsr_imp = 0, + .dsr = 0xffffffff, + .block_dev = { + .if_type = IF_TYPE_MMC, + .removable = 1, + .devnum = 0, + .block_read = mmc_bread, + .block_write = mmc_bwrite, + .block_erase = mmc_berase, + .part_type = 0, + }, +}; + +struct mmc *mmc_create(const struct mmc_config *cfg, void *priv) +{ + struct mmc *mmc = &mmc_static; + + mmc->cfg = cfg; + mmc->priv = priv; + + return mmc; +} + +void mmc_destroy(struct mmc *mmc) +{ +} +#else struct mmc *mmc_create(const struct mmc_config *cfg, void *priv) { struct blk_desc *bdesc; @@ -157,6 +188,7 @@ void mmc_destroy(struct mmc *mmc) /* only freeing memory for now */ free(mmc); } +#endif static int mmc_select_hwpartp(struct blk_desc *desc, int hwpart) { diff --git a/include/mmc.h b/include/mmc.h index 22853234b1..1720955a4c 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -515,6 +515,7 @@ void print_mmc_devices(char separator); * @return 0 if there is no MMC device, else the number of devices */ int get_mmc_num(void); +int mmc_switch_part(struct mmc *mmc, unsigned int part_num); int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf, enum mmc_hwpart_conf_mode mode);