From: Christophe Leroy Date: Thu, 6 Jul 2017 08:33:21 +0000 (+0200) Subject: powerpc, 8xx: Migrate to Kconfig X-Git-Tag: v2017.07~10 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=b1e41d1ceedf0fe90c7873bf9dfddd3690ccc11d;p=oweals%2Fu-boot.git powerpc, 8xx: Migrate to Kconfig Signed-off-by: Christophe Leroy Reviewed-by: Heiko Schocher --- diff --git a/README b/README index da9d4726c8..a6cf9d9cff 100644 --- a/README +++ b/README @@ -324,9 +324,6 @@ The following options need to be configured: multiple fs option at one time for marvell soc family -- 8xx CPU Options: (if using an MPC8xx CPU) - CONFIG_8xx_GCLK_FREQ - CPU clock - - 85xx CPU Options: CONFIG_SYS_PPC64 @@ -3989,16 +3986,6 @@ Low Level (hardware related) configuration options: point to an otherwise UNUSED address space between the top of RAM and the start of the PCI space. -- CONFIG_SYS_SIUMCR: SIU Module Configuration (11-6) - -- CONFIG_SYS_SYPCR: System Protection Control (11-9) - -- CONFIG_SYS_TBSCR: Time Base Status and Control (11-26) - -- CONFIG_SYS_PISCR: Periodic Interrupt Status and Control (11-31) - -- CONFIG_SYS_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30) - - CONFIG_SYS_SCCR: System Clock and reset Control Register (15-27) - CONFIG_SYS_OR_TIMING_SDRAM: @@ -4007,8 +3994,6 @@ Low Level (hardware related) configuration options: - CONFIG_SYS_MAMR_PTA: periodic timer for refresh -- CONFIG_SYS_DER: Debug Event Register (37-47) - - FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM, CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM, diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index cb15dc5ebc..9e1ad33c28 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -10,6 +10,21 @@ choice endchoice +choice + prompt "CPU select" + default MPC866 + +config MPC866 + bool "MPC866" + +config MPC885 + bool "MPC885" + +endchoice + +config 8xx_GCLK_FREQ + int "CPU GCLK Frequency" + comment "Specific commands" config CMD_IMMAP @@ -19,4 +34,137 @@ config CMD_IMMAP siuinfo - print System Interface Unit (SIU) registers memcinfo - print Memory Controller registers + +comment "Configuration Registers" + +config SYS_SIUMCR + hex "SIUMCR register" + help + SIU Module Configuration (11-6) + +config SYS_SYPCR + hex "SYPCR register" + help + System Protection Control (11-9) + +config SYS_TBSCR + hex "TBSCR register" + help + Time Base Status and Control (11-26) + +config SYS_PISCR + hex "PISCR register" + help + Periodic Interrupt Status and Control (11-31) + +config SYS_PLPRCR_BOOL + bool "Customise PLPRCR" + +config SYS_PLPRCR + hex "PLPRCR register" + depends on SYS_PLPRCR_BOOL + help + PLL, Low-Power, and Reset Control Register (15-30) + +config SYS_SCCR + hex "SCCR register" + help + System Clock and reset Control Register (15-27) + +config SYS_SCCR_MASK + hex "MASK for setting SCCR register" + +config SYS_DER + hex "DER register" + help + Debug Event Register (37-47) + +comment "Memory mapping" + +config SYS_BR0_PRELIM + hex "Preliminary value for BR0" + +config SYS_OR0_PRELIM + hex "Preliminary value for OR0" + +config SYS_BR1_PRELIM_BOOL + bool "Define Bank 1" + +config SYS_BR1_PRELIM + hex "Preliminary value for BR1" + depends on SYS_BR1_PRELIM_BOOL + +config SYS_OR1_PRELIM + hex "Preliminary value for OR1" + depends on SYS_BR1_PRELIM_BOOL + +config SYS_BR2_PRELIM_BOOL + bool "Define Bank 2" + +config SYS_BR2_PRELIM + hex "Preliminary value for BR2" + depends on SYS_BR2_PRELIM_BOOL + +config SYS_OR2_PRELIM + hex "Preliminary value for OR2" + depends on SYS_BR2_PRELIM_BOOL + +config SYS_BR3_PRELIM_BOOL + bool "Define Bank 3" + +config SYS_BR3_PRELIM + hex "Preliminary value for BR3" + depends on SYS_BR3_PRELIM_BOOL + +config SYS_OR3_PRELIM + hex "Preliminary value for OR3" + depends on SYS_BR3_PRELIM_BOOL + +config SYS_BR4_PRELIM_BOOL + bool "Define Bank 4" + +config SYS_BR4_PRELIM + hex "Preliminary value for BR4" + depends on SYS_BR4_PRELIM_BOOL + +config SYS_OR4_PRELIM + hex "Preliminary value for OR4" + depends on SYS_BR4_PRELIM_BOOL + +config SYS_BR5_PRELIM_BOOL + bool "Define Bank 5" + +config SYS_BR5_PRELIM + hex "Preliminary value for BR5" + depends on SYS_BR5_PRELIM_BOOL + +config SYS_OR5_PRELIM + hex "Preliminary value for OR5" + depends on SYS_BR5_PRELIM_BOOL + +config SYS_BR6_PRELIM_BOOL + bool "Define Bank 6" + +config SYS_BR6_PRELIM + hex "Preliminary value for BR6" + depends on SYS_BR6_PRELIM_BOOL + +config SYS_OR6_PRELIM + hex "Preliminary value for OR6" + depends on SYS_BR6_PRELIM_BOOL + +config SYS_BR7_PRELIM_BOOL + bool "Define Bank 7" + +config SYS_BR7_PRELIM + hex "Preliminary value for BR7" + depends on SYS_BR7_PRELIM_BOOL + +config SYS_OR7_PRELIM + hex "Preliminary value for OR7" + depends on SYS_BR7_PRELIM_BOOL + +config SYS_IMMR + hex "Value for IMMR" + endmenu diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index b419edfd1e..16e7bf5fd5 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -48,7 +48,7 @@ void cpu_init_f(immap_t __iomem *immr) /* System integration timers. Don't change EBDF! (15-27) */ out_be32(&immr->im_clkrstk.cark_sccrk, KAPWR_KEY); - clrsetbits_be32(&immr->im_clkrst.car_sccr, ~SCCR_MASK, + clrsetbits_be32(&immr->im_clkrst.car_sccr, ~CONFIG_SYS_SCCR_MASK, CONFIG_SYS_SCCR); /* diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c index f2ea0d1b8a..56cb7a506e 100644 --- a/arch/powerpc/cpu/mpc8xx/fec.c +++ b/arch/powerpc/cpu/mpc8xx/fec.c @@ -376,7 +376,7 @@ static void fec_pin_init(int fecidx) out_be32(&immr->im_cpm.cp_fec1.fec_mii_speed, ((bd->bi_intfreq + 4999999) / 5000000) << 1); -#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII) +#if defined(CONFIG_MPC885) && defined(WANT_MII) /* use MDC for MII */ setbits_be16(&immr->im_ioport.iop_pdpar, 0x0080); clrbits_be16(&immr->im_ioport.iop_pddir, 0x0080); @@ -385,7 +385,7 @@ static void fec_pin_init(int fecidx) if (fecidx == 0) { #if defined(CONFIG_ETHER_ON_FEC1) -#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */ +#if defined(CONFIG_MPC885) /* MPC87x/88x have got 2 FECs and different pinout */ #if !defined(CONFIG_RMII) @@ -435,7 +435,7 @@ static void fec_pin_init(int fecidx) } else if (fecidx == 1) { #if defined(CONFIG_ETHER_ON_FEC2) -#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */ +#if defined(CONFIG_MPC885) /* MPC87x/88x have got 2 FECs and different pinout */ #if !defined(CONFIG_RMII) setbits_be32(&immr->im_cpm.cp_pepar, 0x0003fffc); @@ -460,7 +460,7 @@ static void fec_pin_init(int fecidx) clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000028); #endif /* CONFIG_RMII */ -#endif /* CONFIG_MPC885_FAMILY */ +#endif /* CONFIG_MPC885 */ #endif /* CONFIG_ETHER_ON_FEC2 */ } diff --git a/arch/powerpc/include/asm/ppc.h b/arch/powerpc/include/asm/ppc.h index 9a8afe1132..c6aa2f0dfb 100644 --- a/arch/powerpc/include/asm/ppc.h +++ b/arch/powerpc/include/asm/ppc.h @@ -15,11 +15,6 @@ #if defined(CONFIG_8xx) #include -#if defined(CONFIG_MPC866) -# define CONFIG_MPC866_FAMILY 1 -#elif defined(CONFIG_MPC885) -# define CONFIG_MPC885_FAMILY 1 -#endif #endif #ifdef CONFIG_MPC86xx #include diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 50597a7d5a..a21e4a2627 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -29,7 +29,7 @@ #include #endif #endif -#if defined(CONFIG_MPC852T) || defined(CONFIG_MPC866) +#if defined(CONFIG_8xx) #include #endif #include diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 8a4d3f8fe0..76573f331a 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -15,7 +15,6 @@ CONFIG_88F5182 CONFIG_8xx_CONS_NONE CONFIG_8xx_CONS_SMC1 CONFIG_8xx_CONS_SMC2 -CONFIG_8xx_GCLK_FREQ CONFIG_A003399_NOR_WORKAROUND CONFIG_A008044_WORKAROUND CONFIG_ACX517AKN @@ -1533,10 +1532,6 @@ CONFIG_MPC83XX_PCI2 CONFIG_MPC85XX_FEC CONFIG_MPC85XX_FEC_NAME CONFIG_MPC85XX_PCI2 -CONFIG_MPC866 -CONFIG_MPC866_FAMILY -CONFIG_MPC885 -CONFIG_MPC885_FAMILY CONFIG_MPC8XXX_SPI CONFIG_MPC8xxx_DISABLE_BPTR CONFIG_MPLL_FREQ @@ -2917,7 +2912,6 @@ CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS CONFIG_SYS_DEFAULT_VIDEO_MODE CONFIG_SYS_DEF_EEPROM_ADDR -CONFIG_SYS_DER CONFIG_SYS_DEVICE_NULLDEV CONFIG_SYS_DFU_DATA_BUF_SIZE CONFIG_SYS_DFU_MAX_FILE_SIZE @@ -4483,7 +4477,6 @@ CONFIG_SYS_PIOC_PPUDR_VAL CONFIG_SYS_PIOD_PDR_VAL1 CONFIG_SYS_PIOD_PPUDR_VAL CONFIG_SYS_PIO_MODE -CONFIG_SYS_PISCR CONFIG_SYS_PIT_BASE CONFIG_SYS_PIT_PRESCALE CONFIG_SYS_PIXIS_VBOOT_ENABLE @@ -4501,7 +4494,6 @@ CONFIG_SYS_PLL_BYPASS CONFIG_SYS_PLL_FDR CONFIG_SYS_PLL_ODR CONFIG_SYS_PLL_SETTLING_TIME -CONFIG_SYS_PLPRCR CONFIG_SYS_PLUG_BASE CONFIG_SYS_PMAN CONFIG_SYS_PMC_BASE @@ -4730,7 +4722,6 @@ CONFIG_SYS_SH_SDHI_NR_CHANNEL CONFIG_SYS_SICRH CONFIG_SYS_SICRL CONFIG_SYS_SIL1178_I2C -CONFIG_SYS_SIUMCR CONFIG_SYS_SJA1000_BASE CONFIG_SYS_SMC0_CYCLE0_VAL CONFIG_SYS_SMC0_MODE0_VAL @@ -4802,11 +4793,9 @@ CONFIG_SYS_STATUS_OK CONFIG_SYS_STMICRO_BOOT CONFIG_SYS_SUPPORT_64BIT_DATA CONFIG_SYS_SXCNFG_VAL -CONFIG_SYS_SYPCR CONFIG_SYS_SYSTEMACE_BASE CONFIG_SYS_SYSTEMACE_WIDTH CONFIG_SYS_TBIPA_VALUE -CONFIG_SYS_TBSCR CONFIG_SYS_TCLK CONFIG_SYS_TEXT_ADDR CONFIG_SYS_TEXT_BASE_NOR