From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 28 Apr 2013 17:57:30 +0000 (+0000)
Subject: mac80211: b43: only use gpio 0 and 1 for the wifi led
X-Git-Tag: reboot~10558
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=b014140c2e15d428aa2e014553e32e1b9d9196fe;p=oweals%2Fopenwrt.git

mac80211: b43: only use gpio 0 and 1 for the wifi led

sometimes b43 truned the gpio for the switch reset on.

SVN-Revision: 36476
---

diff --git a/package/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch b/package/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch
new file mode 100644
index 0000000000..35d774492e
--- /dev/null
+++ b/package/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch
@@ -0,0 +1,17 @@
+--- a/drivers/net/wireless/b43/main.c
++++ b/drivers/net/wireless/b43/main.c
+@@ -2757,6 +2757,14 @@ static int b43_gpio_init(struct b43_wlde
+ 	} else if (dev->dev->chip_id == 0x5354) {
+ 		/* Don't allow overtaking buttons GPIOs */
+ 		set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */
++	} else if (dev->dev->chip_id == BCMA_CHIP_ID_BCM4716 || 
++		   dev->dev->chip_id == BCMA_CHIP_ID_BCM47162 ||
++		   dev->dev->chip_id == BCMA_CHIP_ID_BCM5356 ||
++		   dev->dev->chip_id == BCMA_CHIP_ID_BCM5357 ||
++		   dev->dev->chip_id == BCMA_CHIP_ID_BCM53572) {
++		/* just use gpio 0 and 1 for 2.4 GHz wifi led */
++		set &= 0x3;
++		mask &= 0x3;
+ 	}
+ 
+ 	if (0 /* FIXME: conditional unknown */ ) {