From: John Crispin Date: Sat, 29 Jun 2013 16:33:18 +0000 (+0000) Subject: lantiq: remove 3.7 kernel patches X-Git-Tag: reboot~10101 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=aff84655f5ab9bc38a7c5b0755ea0f209fa64fe9;p=oweals%2Fopenwrt.git lantiq: remove 3.7 kernel patches Signed-off-by: John Crispin SVN-Revision: 37084 --- diff --git a/target/linux/lantiq/config-3.7 b/target/linux/lantiq/config-3.7 deleted file mode 100644 index 805f8fbf32..0000000000 --- a/target/linux/lantiq/config-3.7 +++ /dev/null @@ -1,162 +0,0 @@ -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_ARCH_SUPPORTS_MSI=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DTC=y -CONFIG_DT_EASY50712=y -CONFIG_EARLY_PRINTK=y -CONFIG_ETHERNET_PACKET_MANGLE=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_MM_LANTIQ=y -CONFIG_GPIO_STP_XWAY=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_WORK=y -CONFIG_HAVE_MACH_CLKDEV=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C_MUX_PINCTRL is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_LANTIQ=y -CONFIG_LANTIQ_ETOP=y -CONFIG_LANTIQ_PHY=y -CONFIG_LANTIQ_WDT=y -CONFIG_LANTIQ_XRX200=y -CONFIG_LEDS_GPIO=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_LANTIQ=y -CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_UIMAGE_SPLIT=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_DEVICE=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -# CONFIG_PCIE_LANTIQ is not set -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LANTIQ=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PINCONF=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_EXYNOS4 is not set -CONFIG_PINCTRL_LANTIQ=y -# CONFIG_PINCTRL_SAMSUNG is not set -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_XWAY=y -CONFIG_PINMUX=y -# CONFIG_PREEMPT_RCU is not set -CONFIG_PROC_DEVICETREE=y -CONFIG_PSB6970_PHY=y -CONFIG_RTL8366RB_PHY=y -CONFIG_RTL8366_SMI=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_LANTIQ=y -# CONFIG_SOC_AMAZON_SE is not set -# CONFIG_SOC_FALCON is not set -# CONFIG_SOC_SVIP is not set -CONFIG_SOC_TYPE_XWAY=y -CONFIG_SOC_XWAY=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SWCONFIG=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_UIDGID_CONVERTED=y -CONFIG_USB_ARCH_HAS_XHCI=y -CONFIG_USE_OF=y -CONFIG_XRX200_PHY_FW=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/lantiq/patches-3.7/0001-MIPS-lantiq-unbreak-devicetree-init.patch b/target/linux/lantiq/patches-3.7/0001-MIPS-lantiq-unbreak-devicetree-init.patch deleted file mode 100644 index e4581cf353..0000000000 --- a/target/linux/lantiq/patches-3.7/0001-MIPS-lantiq-unbreak-devicetree-init.patch +++ /dev/null @@ -1,36 +0,0 @@ -From a15d129a352e5f6ab821b81bc3f692ecc952a815 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 9 Nov 2012 12:09:57 +0100 -Subject: [PATCH 1/6] MIPS: lantiq: unbreak devicetree init - -The bootmem was incorrectly freed resulting in lots of dangling pointers. -Additionally we should use of_platform_populate() as the Documentaion tells us -to do so. - -Signed-off-by: John Crispin -Patchwork: http://patchwork.linux-mips.org/patch/4518 ---- - arch/mips/lantiq/prom.c | 5 +---- - 1 file changed, 1 insertion(+), 4 deletions(-) - ---- a/arch/mips/lantiq/prom.c -+++ b/arch/mips/lantiq/prom.c -@@ -87,9 +87,6 @@ void __init device_tree_init(void) - reserve_bootmem(base, size, BOOTMEM_DEFAULT); - - unflatten_device_tree(); -- -- /* free the space reserved for the dt blob */ -- free_bootmem(base, size); - } - - void __init prom_init(void) -@@ -119,7 +116,7 @@ int __init plat_of_setup(void) - sizeof(of_ids[0].compatible)); - strncpy(of_ids[1].compatible, "simple-bus", - sizeof(of_ids[1].compatible)); -- return of_platform_bus_probe(NULL, of_ids, NULL); -+ return of_platform_populate(NULL, of_ids, NULL, NULL); - } - - arch_initcall(plat_of_setup); diff --git a/target/linux/lantiq/patches-3.7/0002-MIPS-lantiq-fix-bootselect-bits-on-XRX200-SoC.patch b/target/linux/lantiq/patches-3.7/0002-MIPS-lantiq-fix-bootselect-bits-on-XRX200-SoC.patch deleted file mode 100644 index 5bedd91368..0000000000 --- a/target/linux/lantiq/patches-3.7/0002-MIPS-lantiq-fix-bootselect-bits-on-XRX200-SoC.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 15753b6586710d788f36cfd5fbb98d0805b390ab Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 9 Nov 2012 13:31:51 +0100 -Subject: [PATCH 2/6] MIPS: lantiq: fix bootselect bits on XRX200 SoC - -The XRX200 SoC family has a different register layout for reading the boot -selection bits. - -Signed-off-by: John Crispin -Patchwork: http://patchwork.linux-mips.org/patch/4519 ---- - arch/mips/lantiq/xway/reset.c | 22 +++++++++++++++------- - 1 file changed, 15 insertions(+), 7 deletions(-) - ---- a/arch/mips/lantiq/xway/reset.c -+++ b/arch/mips/lantiq/xway/reset.c -@@ -34,11 +34,12 @@ - /* reset cause */ - #define RCU_STAT_SHIFT 26 - /* boot selection */ --#define RCU_BOOT_SEL_SHIFT 26 --#define RCU_BOOT_SEL_MASK 0x7 -+#define RCU_BOOT_SEL(x) ((x >> 18) & 0x7) -+#define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10)) - - /* remapped base addr of the reset control unit */ - static void __iomem *ltq_rcu_membase; -+static struct device_node *ltq_rcu_np; - - /* This function is used by the watchdog driver */ - int ltq_reset_cause(void) -@@ -52,7 +53,11 @@ EXPORT_SYMBOL_GPL(ltq_reset_cause); - unsigned char ltq_boot_select(void) - { - u32 val = ltq_rcu_r32(RCU_RST_STAT); -- return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK; -+ -+ if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) -+ return RCU_BOOT_SEL_XRX200(val); -+ -+ return RCU_BOOT_SEL(val); - } - - /* reset a io domain for u micro seconds */ -@@ -85,14 +90,17 @@ static void ltq_machine_power_off(void) - static int __init mips_reboot_setup(void) - { - struct resource res; -- struct device_node *np = -- of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway"); -+ -+ ltq_rcu_np = of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway"); -+ if (!ltq_rcu_np) -+ ltq_rcu_np = of_find_compatible_node(NULL, NULL, -+ "lantiq,rcu-xrx200"); - - /* check if all the reset register range is available */ -- if (!np) -+ if (!ltq_rcu_np) - panic("Failed to load reset resources from devicetree"); - -- if (of_address_to_resource(np, 0, &res)) -+ if (of_address_to_resource(ltq_rcu_np, 0, &res)) - panic("Failed to get rcu memory range"); - - if (request_mem_region(res.start, resource_size(&res), res.name) < 0) diff --git a/target/linux/lantiq/patches-3.7/0003-MIPS-lantiq-verbose-init-of-dma-core.patch b/target/linux/lantiq/patches-3.7/0003-MIPS-lantiq-verbose-init-of-dma-core.patch deleted file mode 100644 index 3b2e573346..0000000000 --- a/target/linux/lantiq/patches-3.7/0003-MIPS-lantiq-verbose-init-of-dma-core.patch +++ /dev/null @@ -1,45 +0,0 @@ -From b8b3acbe6077b4736f641ec445be8a42cdd1f08b Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 9 Nov 2012 12:16:14 +0100 -Subject: [PATCH 3/6] MIPS: lantiq: verbose init of dma core - -Print the hardware revision and port/channel info when starting the dma core. - -Signed-off-by: John Crispin -Patchwork: http://patchwork.linux-mips.org/patch/4520 ---- - arch/mips/lantiq/xway/dma.c | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - ---- a/arch/mips/lantiq/xway/dma.c -+++ b/arch/mips/lantiq/xway/dma.c -@@ -25,6 +25,7 @@ - #include - #include - -+#define LTQ_DMA_ID 0x08 - #define LTQ_DMA_CTRL 0x10 - #define LTQ_DMA_CPOLL 0x14 - #define LTQ_DMA_CS 0x18 -@@ -214,6 +215,7 @@ ltq_dma_init(struct platform_device *pde - { - struct clk *clk; - struct resource *res; -+ unsigned id; - int i; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -@@ -243,7 +245,12 @@ ltq_dma_init(struct platform_device *pde - ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL); - ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); - } -- dev_info(&pdev->dev, "init done\n"); -+ -+ id = ltq_dma_r32(LTQ_DMA_ID); -+ dev_info(&pdev->dev, -+ "Init done - hw rev: %X, ports: %d, channels: %d\n", -+ id & 0x1f, (id >> 16) & 0xf, id >> 20); -+ - return 0; - } - diff --git a/target/linux/lantiq/patches-3.7/0004-MIPS-lantiq-adds-xrx200-ethernet-clock-definition.patch b/target/linux/lantiq/patches-3.7/0004-MIPS-lantiq-adds-xrx200-ethernet-clock-definition.patch deleted file mode 100644 index fec136ea30..0000000000 --- a/target/linux/lantiq/patches-3.7/0004-MIPS-lantiq-adds-xrx200-ethernet-clock-definition.patch +++ /dev/null @@ -1,24 +0,0 @@ -From f2bbe41c507b475c6f0ae1fca69c7aac6d31d228 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 9 Nov 2012 13:34:18 +0100 -Subject: [PATCH 4/6] MIPS: lantiq: adds xrx200 ethernet clock definition - -Signed-off-by: John Crispin -Patchwork: http://patchwork.linux-mips.org/patch/4521 ---- - arch/mips/lantiq/xway/sysctrl.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/mips/lantiq/xway/sysctrl.c -+++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -370,6 +370,10 @@ void __init ltq_soc_init(void) - clkdev_add_pmu("1d900000.pcie", "pdi", 1, PMU1_PCIE_PDI); - clkdev_add_pmu("1d900000.pcie", "ctl", 1, PMU1_PCIE_CTL); - clkdev_add_pmu("1d900000.pcie", "ahb", 0, PMU_AHBM | PMU_AHBS); -+ clkdev_add_pmu("1e108000.eth", NULL, 0, -+ PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | -+ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | -+ PMU_PPE_QSB | PMU_PPE_TOP); - } else if (of_machine_is_compatible("lantiq,ar9")) { - clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), - ltq_ar9_fpi_hz()); diff --git a/target/linux/lantiq/patches-3.7/0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch b/target/linux/lantiq/patches-3.7/0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch deleted file mode 100644 index deb5016aa6..0000000000 --- a/target/linux/lantiq/patches-3.7/0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch +++ /dev/null @@ -1,82 +0,0 @@ -From af14a456c58c153c6d761e6c0af48157692b52ad Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 9 Nov 2012 13:43:30 +0100 -Subject: [PATCH 5/6] MIPS: lantiq: adds code for booting GPHY - -The XRX200 family of SoCs has embedded gigabit PHYs. This patch adds code to -boot them up. - -Signed-off-by: John Crispin -Patchwork: http://patchwork.linux-mips.org/patch/4522 ---- - .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 ++ - arch/mips/lantiq/xway/reset.c | 36 ++++++++++++++++++++ - 2 files changed, 39 insertions(+) - ---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h -+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h -@@ -82,6 +82,9 @@ extern __iomem void *ltq_cgu_membase; - #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000) - #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344)) - -+/* allow booting xrx200 phys */ -+int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr); -+ - /* request a non-gpio and set the PIO config */ - #define PMU_PPE BIT(13) - extern void ltq_pmu_enable(unsigned int module); ---- a/arch/mips/lantiq/xway/reset.c -+++ b/arch/mips/lantiq/xway/reset.c -@@ -28,9 +28,15 @@ - #define RCU_RST_REQ 0x0010 - /* reset status register */ - #define RCU_RST_STAT 0x0014 -+/* vr9 gphy registers */ -+#define RCU_GFS_ADD0_XRX200 0x0020 -+#define RCU_GFS_ADD1_XRX200 0x0068 - - /* reboot bit */ -+#define RCU_RD_GPHY0_XRX200 BIT(31) - #define RCU_RD_SRST BIT(30) -+#define RCU_RD_GPHY1_XRX200 BIT(29) -+ - /* reset cause */ - #define RCU_STAT_SHIFT 26 - /* boot selection */ -@@ -60,6 +66,36 @@ unsigned char ltq_boot_select(void) - return RCU_BOOT_SEL(val); - } - -+/* reset / boot a gphy */ -+static struct ltq_xrx200_gphy_reset { -+ u32 rd; -+ u32 addr; -+} xrx200_gphy[] = { -+ {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200}, -+ {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200}, -+}; -+ -+/* reset and boot a gphy. these phys only exist on xrx200 SoC */ -+int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) -+{ -+ if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) { -+ dev_err(dev, "this SoC has no GPHY\n"); -+ return -EINVAL; -+ } -+ if (id > 1) { -+ dev_err(dev, "%u is an invalid gphy id\n", id); -+ return -EINVAL; -+ } -+ dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr); -+ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd, -+ RCU_RST_REQ); -+ ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd, -+ RCU_RST_REQ); -+ return 0; -+} -+ - /* reset a io domain for u micro seconds */ - void ltq_reset_once(unsigned int module, ulong u) - { diff --git a/target/linux/lantiq/patches-3.7/0006-MIPS-lantiq-adds-GPHY-firmware-loader.patch b/target/linux/lantiq/patches-3.7/0006-MIPS-lantiq-adds-GPHY-firmware-loader.patch deleted file mode 100644 index b8ff6b844d..0000000000 --- a/target/linux/lantiq/patches-3.7/0006-MIPS-lantiq-adds-GPHY-firmware-loader.patch +++ /dev/null @@ -1,134 +0,0 @@ -From 0224cde212df4abf251f89c3724a800b1949a774 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 22 Oct 2012 07:52:50 +0200 -Subject: [PATCH 6/6] MIPS: lantiq: adds GPHY firmware loader - -The internal GPHYs need a firmware blob to function properly. This patch adds -the code needed to request the blob and load it to the PHY. - -Signed-off-by: John Crispin -Patchwork: http://patchwork.linux-mips.org/patch/4523 ---- - arch/mips/lantiq/Kconfig | 4 ++ - arch/mips/lantiq/xway/Makefile | 2 + - arch/mips/lantiq/xway/xrx200_phy_fw.c | 97 +++++++++++++++++++++++++++++++++ - 3 files changed, 103 insertions(+) - create mode 100644 arch/mips/lantiq/xway/xrx200_phy_fw.c - ---- a/arch/mips/lantiq/Kconfig -+++ b/arch/mips/lantiq/Kconfig -@@ -36,4 +36,8 @@ config PCI_LANTIQ - bool "PCI Support" - depends on SOC_XWAY && PCI - -+config XRX200_PHY_FW -+ bool "XRX200 PHY firmware loader" -+ depends on SOC_XWAY -+ - endif ---- a/arch/mips/lantiq/xway/Makefile -+++ b/arch/mips/lantiq/xway/Makefile -@@ -1 +1,3 @@ - obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o -+ -+obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o ---- /dev/null -+++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c -@@ -0,0 +1,97 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2012 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define XRX200_GPHY_FW_ALIGN (16 * 1024) -+ -+static dma_addr_t xway_gphy_load(struct platform_device *pdev) -+{ -+ const struct firmware *fw; -+ dma_addr_t dev_addr = 0; -+ const char *fw_name; -+ void *fw_addr; -+ size_t size; -+ -+ if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) { -+ dev_err(&pdev->dev, "failed to load firmware filename\n"); -+ return 0; -+ } -+ -+ dev_info(&pdev->dev, "requesting %s\n", fw_name); -+ if (request_firmware(&fw, fw_name, &pdev->dev)) { -+ dev_err(&pdev->dev, "failed to load firmware: %s\n", fw_name); -+ return 0; -+ } -+ -+ /* -+ * GPHY cores need the firmware code in a persistent and contiguous -+ * memory area with a 16 kB boundary aligned start address -+ */ -+ size = fw->size + XRX200_GPHY_FW_ALIGN; -+ -+ fw_addr = dma_alloc_coherent(&pdev->dev, size, &dev_addr, GFP_KERNEL); -+ if (fw_addr) { -+ fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); -+ dev_addr = ALIGN(dev_addr, XRX200_GPHY_FW_ALIGN); -+ memcpy(fw_addr, fw->data, fw->size); -+ } else { -+ dev_err(&pdev->dev, "failed to alloc firmware memory\n"); -+ } -+ -+ release_firmware(fw); -+ return dev_addr; -+} -+ -+static int __devinit xway_phy_fw_probe(struct platform_device *pdev) -+{ -+ dma_addr_t fw_addr; -+ struct property *pp; -+ unsigned char *phyids; -+ int i, ret = 0; -+ -+ fw_addr = xway_gphy_load(pdev); -+ if (!fw_addr) -+ return -EINVAL; -+ pp = of_find_property(pdev->dev.of_node, "phys", NULL); -+ if (!pp) -+ return -ENOENT; -+ phyids = pp->value; -+ for (i = 0; i < pp->length && !ret; i++) -+ ret = xrx200_gphy_boot(&pdev->dev, phyids[i], fw_addr); -+ if (!ret) -+ mdelay(100); -+ return ret; -+} -+ -+static const struct of_device_id xway_phy_match[] = { -+ { .compatible = "lantiq,phy-xrx200" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, xway_phy_match); -+ -+static struct platform_driver xway_phy_driver = { -+ .probe = xway_phy_fw_probe, -+ .driver = { -+ .name = "phy-xrx200", -+ .owner = THIS_MODULE, -+ .of_match_table = xway_phy_match, -+ }, -+}; -+ -+module_platform_driver(xway_phy_driver); -+ -+MODULE_AUTHOR("John Crispin "); -+MODULE_DESCRIPTION("Lantiq XRX200 PHY Firmware Loader"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/patches-3.7/0100-MIPS-lantiq-honour-model-property-inside-devicetree-.patch b/target/linux/lantiq/patches-3.7/0100-MIPS-lantiq-honour-model-property-inside-devicetree-.patch deleted file mode 100644 index 6ab00c1ef7..0000000000 --- a/target/linux/lantiq/patches-3.7/0100-MIPS-lantiq-honour-model-property-inside-devicetree-.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 60bc3043590bf74ca1c9dd88a4e5f28a40d5b348 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 6 Dec 2012 10:26:05 +0100 -Subject: [PATCH 100/123] MIPS: lantiq: honour model property inside - devicetree during board init - ---- - arch/mips/lantiq/prom.c | 20 ++++++++++++++++++-- - 1 file changed, 18 insertions(+), 2 deletions(-) - ---- a/arch/mips/lantiq/prom.c -+++ b/arch/mips/lantiq/prom.c -@@ -57,6 +57,21 @@ static void __init prom_init_cmdline(voi - } - } - -+int __init early_init_dt_scan_model(unsigned long node, -+ const char *uname, int depth, -+ void *data) -+{ -+ if (!depth) { -+ char *model = of_get_flat_dt_prop(node, "model", NULL); -+ if (model) { -+ pr_info("Board: %s\n", model); -+ snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN, "%s - %s", -+ soc_info.sys_type, model); -+ } -+ } -+ return 0; -+} -+ - void __init plat_mem_setup(void) - { - ioport_resource.start = IOPORT_RESOURCE_START; -@@ -71,6 +86,8 @@ void __init plat_mem_setup(void) - * parsed resulting in our memory appearing - */ - __dt_setup_arch(&__dtb_start); -+ -+ of_scan_flat_dt(early_init_dt_scan_model, NULL); - } - - void __init device_tree_init(void) -@@ -93,9 +110,8 @@ void __init prom_init(void) - { - /* call the soc specific detetcion code and get it to fill soc_info */ - ltq_soc_detect(&soc_info); -- snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s", -+ snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN, "%s rev %s", - soc_info.name, soc_info.rev_type); -- soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0'; - pr_info("SoC: %s\n", soc_info.sys_type); - prom_init_cmdline(); - diff --git a/target/linux/lantiq/patches-3.7/0101-MIPS-lantiq-adds-support-for-SVIP-SoC-Family.patch b/target/linux/lantiq/patches-3.7/0101-MIPS-lantiq-adds-support-for-SVIP-SoC-Family.patch deleted file mode 100644 index 4d263cb751..0000000000 --- a/target/linux/lantiq/patches-3.7/0101-MIPS-lantiq-adds-support-for-SVIP-SoC-Family.patch +++ /dev/null @@ -1,409 +0,0 @@ -From 4d77ad216ad86b3b25c196a189fa28f3e53c3ffd Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 30 Nov 2012 21:32:00 +0100 -Subject: [PATCH 101/123] MIPS: lantiq: adds support for SVIP SoC Family - ---- - arch/mips/kernel/cevt-r4k.c | 4 +- - arch/mips/lantiq/Kconfig | 4 ++ - arch/mips/lantiq/Makefile | 1 + - arch/mips/lantiq/Platform | 1 + - arch/mips/lantiq/clk.c | 7 +++ - arch/mips/lantiq/clk.h | 4 ++ - arch/mips/lantiq/svip/Makefile | 1 + - arch/mips/lantiq/svip/clk.c | 70 ++++++++++++++++++++++++++ - arch/mips/lantiq/svip/prom.c | 43 ++++++++++++++++ - arch/mips/lantiq/svip/reset.c | 105 +++++++++++++++++++++++++++++++++++++++ - arch/mips/lantiq/svip/sysctrl.c | 81 ++++++++++++++++++++++++++++++ - 11 files changed, 320 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/lantiq/svip/Makefile - create mode 100644 arch/mips/lantiq/svip/clk.c - create mode 100644 arch/mips/lantiq/svip/prom.c - create mode 100644 arch/mips/lantiq/svip/reset.c - create mode 100644 arch/mips/lantiq/svip/sysctrl.c - ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -176,8 +176,10 @@ int __cpuinit r4k_clockevent_init(void) - if (!cpu_has_counter || !mips_hpt_frequency) - return -ENXIO; - -- if (!c0_compare_int_usable()) -+ if (!c0_compare_int_usable()) { -+ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); - return -ENXIO; -+ } - - /* - * With vectored interrupts things are getting platform specific. ---- a/arch/mips/lantiq/Kconfig -+++ b/arch/mips/lantiq/Kconfig -@@ -22,6 +22,10 @@ config SOC_FALCON - bool "FALCON" - select PINCTRL_FALCON - -+config SOC_SVIP -+ bool "SVIP" -+ select MIPS_CPU_SCACHE -+ - endchoice - - choice ---- a/arch/mips/lantiq/Makefile -+++ b/arch/mips/lantiq/Makefile -@@ -12,3 +12,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin - - obj-$(CONFIG_SOC_TYPE_XWAY) += xway/ - obj-$(CONFIG_SOC_FALCON) += falcon/ -+obj-$(CONFIG_SOC_SVIP) += svip/ ---- a/arch/mips/lantiq/Platform -+++ b/arch/mips/lantiq/Platform -@@ -7,3 +7,4 @@ cflags-$(CONFIG_LANTIQ) += -I$(srctree) - load-$(CONFIG_LANTIQ) = 0xffffffff80002000 - cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway - cflags-$(CONFIG_SOC_FALCON) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon -+cflags-$(CONFIG_SOC_SVIP) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/svip ---- a/arch/mips/lantiq/clk.c -+++ b/arch/mips/lantiq/clk.c -@@ -163,8 +163,15 @@ void __init plat_time_init(void) - ltq_soc_init(); - - clk = clk_get_cpu(); -+#ifdef CONFIG_SOC_SVIP -+ mips_hpt_frequency = ltq_svip_cpu_hz() / get_counter_resolution(); -+ write_c0_count(0); -+ write_c0_compare(mips_hpt_frequency / HZ); -+ enable_irq(MIPS_CPU_TIMER_IRQ); -+#else - mips_hpt_frequency = clk_get_rate(clk) / get_counter_resolution(); - write_c0_compare(read_c0_count()); -+#endif - pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000); - clk_put(clk); - } ---- a/arch/mips/lantiq/clk.h -+++ b/arch/mips/lantiq/clk.h -@@ -75,4 +75,8 @@ extern unsigned long ltq_ar9_fpi_hz(void - extern unsigned long ltq_vr9_cpu_hz(void); - extern unsigned long ltq_vr9_fpi_hz(void); - -+extern unsigned long ltq_svip_cpu_hz(void); -+extern unsigned long ltq_svip_fpi_hz(void); -+extern unsigned long ltq_svip_io_hz(void); -+ - #endif ---- /dev/null -+++ b/arch/mips/lantiq/svip/Makefile -@@ -0,0 +1 @@ -+obj-y := prom.o reset.o sysctrl.o clk.o ---- /dev/null -+++ b/arch/mips/lantiq/svip/clk.c -@@ -0,0 +1,70 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+ -+#include "../clk.h" -+ -+#define STATUS_CONFIG_CLK_MODE (0x1 << 1) -+#define STATUS_CONFIG_CLK_MODE_GET(val) ((((val) & STATUS_CONFIG_CLK_MODE) >> 4) & 0x1) -+#define STATUS_CONFIG 0x0010 -+ -+#define SYS0_PLL1CR_PLLDIV (0x3) -+#define SYS0_PLL1CR_PLLDIV_GET(val) ((((val) & SYS0_PLL1CR_PLLDIV) >> 0) & 0x3) -+#define SYS0_PLL1CR 0x0008 -+ -+#define SYS1_FPICR_FPIDIV (0x1) -+#define SYS1_FPICR_FPIDIV_GET(val) ((((val) & SYS1_FPICR_FPIDIV) >> 0) & 0x1) -+#define SYS1_FPICR 0x0014 -+ -+unsigned long ltq_svip_io_hz(void) -+{ -+ return 200000000; /* 200 MHz */ -+} -+ -+unsigned long ltq_svip_cpu_hz(void) -+{ -+ /* Magic BootROM speed location... */ -+ if ((*(u32 *)0x9fc07ff0) == 1) -+ return *(u32 *)0x9fc07ff4; -+ -+ if (STATUS_CONFIG_CLK_MODE_GET(ltq_status_r32(STATUS_CONFIG)) == 1) { -+ /* xT16 */ -+ return 393216000; -+ } else { -+ switch (SYS0_PLL1CR_PLLDIV_GET(ltq_sys0_r32(SYS0_PLL1CR))) { -+ case 3: -+ return 475000000; -+ case 2: -+ return 450000000; -+ case 1: -+ return 425000000; -+ default: -+ break; -+ } -+ } -+ return 400000000; -+} -+ -+unsigned long ltq_svip_fpi_hz(void) -+{ -+ u32 fbs0_div[2] = {4, 8}; -+ u32 div; -+ -+ div = SYS1_FPICR_FPIDIV_GET(ltq_sys1_r32(SYS1_FPICR)); -+ return ltq_svip_cpu_hz() / fbs0_div[div]; -+} ---- /dev/null -+++ b/arch/mips/lantiq/svip/prom.c -@@ -0,0 +1,43 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2012 Thomas Langer -+ * Copyright (C) 2012 John Crispin -+ */ -+ -+#include -+#include -+ -+#include -+ -+#include "../prom.h" -+ -+#define SOC_SVIP "SVIP" -+ -+#define COMP_SVIP "lantiq,svip" -+ -+#define PART_SHIFT 12 -+#define PART_MASK 0x0FFFF000 -+#define REV_SHIFT 28 -+#define REV_MASK 0xF0000000 -+ -+void __init ltq_soc_detect(struct ltq_soc_info *i) -+{ -+ i->partnum = (ltq_r32(LTQ_STATUS_CHIPID) & PART_MASK) >> PART_SHIFT; -+ i->rev = (ltq_r32(LTQ_STATUS_CHIPID) & REV_MASK) >> REV_SHIFT; -+ sprintf(i->rev_type, "1.%d", i->rev); -+ -+ switch (i->partnum) { -+ case SOC_ID_SVIP: -+ i->name = SOC_SVIP; -+ i->type = SOC_TYPE_SVIP; -+ i->compatible = COMP_SVIP; -+ break; -+ -+ default: -+ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); -+ break; -+ } -+} ---- /dev/null -+++ b/arch/mips/lantiq/svip/reset.c -@@ -0,0 +1,105 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2012 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define CPLD_CMDREG3 ((volatile unsigned char*)(KSEG1 + 0x120000f3)) -+ -+#define LTQ_EBU_ADDRSEL2 0x0028 -+#define LTQ_EBU_BUSCON2 0x0068 -+#define LTQ_BOOT_CPU_OFFSET 0x20 -+ -+#define LTQ_L2_SPRAM_BASE (KSEG1 + 0x1F1E8000) -+#define LTQ_BOOT_RVEC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ -+ (cpu * LTQ_BOOT_CPU_OFFSET)) -+ -+#define SYS0_BCR 0x0004 -+#define BMODE_SHIFT 16 -+#define BMODE_MASK 0x1f -+ -+#define SYS1_CLKCLR 0x0008 -+#define SYS1_RREQR 0x0044 -+#define SYS1_RRLSR 0x0048 -+#define SYS1_RBTR 0x004c -+#define SYS1_CPU0RSR 0x0060 -+#define SYS1_CPU0RSR_MASK 0x0007 -+ -+/* This function is used by the watchdog driver */ -+int ltq_reset_cause(void) -+{ -+ return ltq_sys1_r32(SYS1_CPU0RSR) & SYS1_CPU0RSR_MASK; -+} -+EXPORT_SYMBOL_GPL(ltq_reset_cause); -+ -+/* allow platform code to find out what source we booted from */ -+unsigned char ltq_boot_select(void) -+{ -+ return (ltq_sys0_r32(SYS0_BCR) >> BMODE_SHIFT) & BMODE_MASK; -+} -+ -+static void ltq_machine_restart(char *command) -+{ -+ local_irq_disable(); -+ if (/*mips_machtype == LANTIQ_MACH_EASY33016 || -+ mips_machtype == LANTIQ_MACH_EASY336)*/ -+ 1) { -+ /* We just use the CPLD function to reset the entire system as a -+ workaround for the switch reset problem */ -+ local_irq_disable(); -+ ltq_ebu_w32(0x120000f1, LTQ_EBU_ADDRSEL2); -+ ltq_ebu_w32(0x404027ff, LTQ_EBU_BUSCON2); -+ -+ if (/*mips_machtype == LANTIQ_MACH_EASY336*/ -+ 0) -+ /* set bit 0 to reset SVIP */ -+ *CPLD_CMDREG3 = (1<<0); -+ else -+ /* set bit 7 to reset SVIP, set bit 3 to reset xT */ -+ *CPLD_CMDREG3 = (1<<7) | (1<<3); -+ } else { -+ *LTQ_BOOT_RVEC(0) = 0; -+ /* reset all except PER, SUBSYS and CPU0 */ -+ ltq_sys1_w32(0x00043F3E, SYS1_RREQR); -+ /* release WDT0 reset */ -+ ltq_sys1_w32(0x00000100, SYS1_RRLSR); -+ /* restore reset value for clock enables */ -+ ltq_sys1_w32(~0x0c000040, SYS1_CLKCLR); -+ /* reset SUBSYS (incl. DDR2) and CPU0 */ -+ ltq_sys1_w32(0x00030001, SYS1_RBTR); -+ } -+ -+ unreachable(); -+} -+ -+static void ltq_machine_halt(void) -+{ -+ local_irq_disable(); -+ unreachable(); -+} -+ -+static void ltq_machine_power_off(void) -+{ -+ local_irq_disable(); -+} -+ -+static int __init mips_reboot_setup(void) -+{ -+ _machine_restart = ltq_machine_restart; -+ _machine_halt = ltq_machine_halt; -+ pm_power_off = ltq_machine_power_off; -+ return 0; -+} -+ -+arch_initcall(mips_reboot_setup); ---- /dev/null -+++ b/arch/mips/lantiq/svip/sysctrl.c -@@ -0,0 +1,81 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2011-2012 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include "../clk.h" -+#include "../prom.h" -+ -+void __iomem *ltq_sys0_membase; -+void __iomem *ltq_sys1_membase; -+void __iomem *ltq_sys2_membase; -+void __iomem *ltq_status_membase; -+void __iomem *ltq_ebu_membase; -+ -+/* bring up all register ranges that we need for basic system control */ -+void __init ltq_soc_init(void) -+{ -+ struct resource res_sys0, res_sys1, res_sys2, res_status, res_ebu; -+ struct device_node *np_sys0 = -+ of_find_compatible_node(NULL, NULL, "lantiq,sys0-svip"); -+ struct device_node *np_sys1 = -+ of_find_compatible_node(NULL, NULL, "lantiq,sys1-svip"); -+ struct device_node *np_sys2 = -+ of_find_compatible_node(NULL, NULL, "lantiq,sys2-svip"); -+ struct device_node *np_status = -+ of_find_compatible_node(NULL, NULL, "lantiq,status-svip"); -+ struct device_node *np_ebu = -+ of_find_compatible_node(NULL, NULL, "lantiq,ebu-svip"); -+ -+ /* check if all the core register ranges are available */ -+ if (!np_sys0 || !np_sys1 || !np_sys2 || !np_status || !np_ebu) -+ panic("Failed to load core nodes from devicetree"); -+ -+ if (of_address_to_resource(np_sys0, 0, &res_sys0) || -+ of_address_to_resource(np_sys1, 0, &res_sys1) || -+ of_address_to_resource(np_sys2, 0, &res_sys2) || -+ of_address_to_resource(np_status, 0, &res_status) || -+ of_address_to_resource(np_ebu, 0, &res_ebu)) -+ panic("Failed to get core resources"); -+ -+ if ((request_mem_region(res_sys0.start, resource_size(&res_sys0), -+ res_sys0.name) < 0) || -+ (request_mem_region(res_sys1.start, resource_size(&res_sys1), -+ res_sys1.name) < 0) || -+ (request_mem_region(res_sys2.start, resource_size(&res_sys2), -+ res_sys2.name) < 0) || -+ (request_mem_region(res_status.start, resource_size(&res_status), -+ res_status.name) < 0) || -+ (request_mem_region(res_ebu.start, resource_size(&res_ebu), -+ res_ebu.name) < 0)) -+ pr_err("Failed to request core reources"); -+ -+ ltq_sys0_membase = ioremap_nocache(res_sys0.start, -+ resource_size(&res_sys0)); -+ ltq_sys1_membase = ioremap_nocache(res_sys1.start, -+ resource_size(&res_sys1)); -+ ltq_sys2_membase = ioremap_nocache(res_sys2.start, -+ resource_size(&res_sys2)); -+ ltq_status_membase = ioremap_nocache(res_status.start, -+ resource_size(&res_status)); -+ ltq_ebu_membase = ioremap_nocache(res_ebu.start, -+ resource_size(&res_ebu)); -+ if (!ltq_sys0_membase || !ltq_sys1_membase || !ltq_sys2_membase || -+ !ltq_status_membase || !ltq_ebu_membase) -+ panic("Failed to remap core resources"); -+ -+ clkdev_add_static(ltq_svip_cpu_hz(), ltq_svip_fpi_hz(), -+ ltq_svip_io_hz()); -+} diff --git a/target/linux/lantiq/patches-3.7/0102-MIPS-lantiq-add-GPHY-clock-gate-bits.patch b/target/linux/lantiq/patches-3.7/0102-MIPS-lantiq-add-GPHY-clock-gate-bits.patch deleted file mode 100644 index 48ac7d419e..0000000000 --- a/target/linux/lantiq/patches-3.7/0102-MIPS-lantiq-add-GPHY-clock-gate-bits.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 05d6c964722224e8cf2902606744e29a835e7d5f Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 3 Dec 2012 21:35:01 +0100 -Subject: [PATCH 102/123] MIPS: lantiq: add GPHY clock gate bits - -Explicitly enable the clock gate of the internal GPHYs found on xrx200. - -Signed-off-by: John Crispin ---- - arch/mips/lantiq/xway/reset.c | 9 +++++++++ - arch/mips/lantiq/xway/sysctrl.c | 1 + - 2 files changed, 10 insertions(+) - ---- a/arch/mips/lantiq/xway/reset.c -+++ b/arch/mips/lantiq/xway/reset.c -@@ -78,10 +78,19 @@ static struct ltq_xrx200_gphy_reset { - /* reset and boot a gphy. these phys only exist on xrx200 SoC */ - int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) - { -+ struct clk *clk; -+ - if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) { - dev_err(dev, "this SoC has no GPHY\n"); - return -EINVAL; - } -+ -+ clk = clk_get_sys("1f203000.rcu", "gphy"); -+ if (IS_ERR(clk)) -+ return PTR_ERR(clk); -+ -+ clk_enable(clk); -+ - if (id > 1) { - dev_err(dev, "%u is an invalid gphy id\n", id); - return -EINVAL; ---- a/arch/mips/lantiq/xway/sysctrl.c -+++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -374,6 +374,7 @@ void __init ltq_soc_init(void) - PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | - PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | - PMU_PPE_QSB | PMU_PPE_TOP); -+ clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY); - } else if (of_machine_is_compatible("lantiq,ar9")) { - clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), - ltq_ar9_fpi_hz()); diff --git a/target/linux/lantiq/patches-3.7/0103-MIPS-lantiq-adds-static-clock-for-PP32.patch b/target/linux/lantiq/patches-3.7/0103-MIPS-lantiq-adds-static-clock-for-PP32.patch deleted file mode 100644 index 788024d839..0000000000 --- a/target/linux/lantiq/patches-3.7/0103-MIPS-lantiq-adds-static-clock-for-PP32.patch +++ /dev/null @@ -1,206 +0,0 @@ -From 8cbac4b30bed1552503b95bc0ac6276e3cdda9d8 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 30 Nov 2012 21:08:49 +0100 -Subject: [PATCH 103/123] MIPS: lantiq: adds static clock for PP32 - -The Lantiq DSL SoCs have an internal networking processor. Add code to read -the static clock rate. - -Signed-off-by: John Crispin ---- - arch/mips/include/asm/mach-lantiq/lantiq.h | 1 + - arch/mips/lantiq/clk.c | 12 ++++++-- - arch/mips/lantiq/clk.h | 7 ++++- - arch/mips/lantiq/falcon/sysctrl.c | 4 +-- - arch/mips/lantiq/xway/clk.c | 43 ++++++++++++++++++++++++++++ - arch/mips/lantiq/xway/sysctrl.c | 12 ++++---- - 6 files changed, 69 insertions(+), 10 deletions(-) - ---- a/arch/mips/include/asm/mach-lantiq/lantiq.h -+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h -@@ -41,6 +41,7 @@ extern void clk_deactivate(struct clk *c - extern struct clk *clk_get_cpu(void); - extern struct clk *clk_get_fpi(void); - extern struct clk *clk_get_io(void); -+extern struct clk *clk_get_ppe(void); - - /* find out what bootsource we have */ - extern unsigned char ltq_boot_select(void); ---- a/arch/mips/lantiq/clk.c -+++ b/arch/mips/lantiq/clk.c -@@ -26,13 +26,15 @@ - #include "prom.h" - - /* lantiq socs have 3 static clocks */ --static struct clk cpu_clk_generic[3]; -+static struct clk cpu_clk_generic[4]; - --void clkdev_add_static(unsigned long cpu, unsigned long fpi, unsigned long io) -+void clkdev_add_static(unsigned long cpu, unsigned long fpi, -+ unsigned long io, unsigned long ppe) - { - cpu_clk_generic[0].rate = cpu; - cpu_clk_generic[1].rate = fpi; - cpu_clk_generic[2].rate = io; -+ cpu_clk_generic[3].rate = ppe; - } - - struct clk *clk_get_cpu(void) -@@ -51,6 +53,12 @@ struct clk *clk_get_io(void) - return &cpu_clk_generic[2]; - } - -+struct clk *clk_get_ppe(void) -+{ -+ return &cpu_clk_generic[3]; -+} -+EXPORT_SYMBOL_GPL(clk_get_ppe); -+ - static inline int clk_good(struct clk *clk) - { - return clk && !IS_ERR(clk); ---- a/arch/mips/lantiq/clk.h -+++ b/arch/mips/lantiq/clk.h -@@ -27,12 +27,15 @@ - #define CLOCK_167M 166666667 - #define CLOCK_196_608M 196608000 - #define CLOCK_200M 200000000 -+#define CLOCK_222M 222000000 -+#define CLOCK_240M 240000000 - #define CLOCK_250M 250000000 - #define CLOCK_266M 266666666 - #define CLOCK_300M 300000000 - #define CLOCK_333M 333333333 - #define CLOCK_393M 393215332 - #define CLOCK_400M 400000000 -+#define CLOCK_450M 450000000 - #define CLOCK_500M 500000000 - #define CLOCK_600M 600000000 - -@@ -64,16 +67,18 @@ struct clk { - }; - - extern void clkdev_add_static(unsigned long cpu, unsigned long fpi, -- unsigned long io); -+ unsigned long io, unsigned long ppe); - - extern unsigned long ltq_danube_cpu_hz(void); - extern unsigned long ltq_danube_fpi_hz(void); -+extern unsigned long ltq_danube_pp32_hz(void); - - extern unsigned long ltq_ar9_cpu_hz(void); - extern unsigned long ltq_ar9_fpi_hz(void); - - extern unsigned long ltq_vr9_cpu_hz(void); - extern unsigned long ltq_vr9_fpi_hz(void); -+extern unsigned long ltq_vr9_pp32_hz(void); - - extern unsigned long ltq_svip_cpu_hz(void); - extern unsigned long ltq_svip_fpi_hz(void); ---- a/arch/mips/lantiq/falcon/sysctrl.c -+++ b/arch/mips/lantiq/falcon/sysctrl.c -@@ -241,9 +241,9 @@ void __init ltq_soc_init(void) - - /* get our 3 static rates for cpu, fpi and io clocks */ - if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV) -- clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M); -+ clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M, 0); - else -- clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M); -+ clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M, 0); - - /* add our clock domains */ - clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0); ---- a/arch/mips/lantiq/xway/clk.c -+++ b/arch/mips/lantiq/xway/clk.c -@@ -53,6 +53,29 @@ unsigned long ltq_danube_cpu_hz(void) - } - } - -+unsigned long ltq_danube_pp32_hz(void) -+{ -+ unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 7) & 3; -+ unsigned long clk; -+ -+ switch (clksys) { -+ case 1: -+ clk = CLOCK_240M; -+ break; -+ case 2: -+ clk = CLOCK_222M; -+ break; -+ case 3: -+ clk = CLOCK_133M; -+ break; -+ default: -+ clk = CLOCK_266M; -+ break; -+ } -+ -+ return clk; -+} -+ - unsigned long ltq_ar9_sys_hz(void) - { - if (((ltq_cgu_r32(CGU_SYS) >> 3) & 0x3) == 0x2) -@@ -147,5 +170,25 @@ unsigned long ltq_vr9_fpi_hz(void) - break; - } - -+ return clk; -+} -+ -+unsigned long ltq_vr9_pp32_hz(void) -+{ -+ unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 3; -+ unsigned long clk; -+ -+ switch (clksys) { -+ case 1: -+ clk = CLOCK_450M; -+ break; -+ case 2: -+ clk = CLOCK_300M; -+ break; -+ default: -+ clk = CLOCK_500M; -+ break; -+ } -+ - return clk; - } ---- a/arch/mips/lantiq/xway/sysctrl.c -+++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -356,14 +356,16 @@ void __init ltq_soc_init(void) - - if (of_machine_is_compatible("lantiq,ase")) { - if (ltq_cgu_r32(CGU_SYS) & (1 << 5)) -- clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M); -+ clkdev_add_static(CLOCK_266M, CLOCK_133M, -+ CLOCK_133M, CLOCK_266M); - else -- clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M); -+ clkdev_add_static(CLOCK_133M, CLOCK_133M, -+ CLOCK_133M, CLOCK_133M); - clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY), - clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY); - } else if (of_machine_is_compatible("lantiq,vr9")) { - clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(), -- ltq_vr9_fpi_hz()); -+ ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz()); - clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY); - clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK); - clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI); -@@ -377,10 +379,10 @@ void __init ltq_soc_init(void) - clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY); - } else if (of_machine_is_compatible("lantiq,ar9")) { - clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), -- ltq_ar9_fpi_hz()); -+ ltq_ar9_fpi_hz(), CLOCK_250M); - clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH); - } else { - clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(), -- ltq_danube_fpi_hz()); -+ ltq_danube_fpi_hz(), ltq_danube_pp32_hz()); - } - } diff --git a/target/linux/lantiq/patches-3.7/0104-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch b/target/linux/lantiq/patches-3.7/0104-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch deleted file mode 100644 index 16b3604b1c..0000000000 --- a/target/linux/lantiq/patches-3.7/0104-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 07f7321c0f79c0b800d28898a480d044f839e813 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 6 Dec 2012 11:59:23 +0100 -Subject: [PATCH 104/123] MIPS: lantiq: adds 4dword burst length for dma - ---- - arch/mips/lantiq/xway/dma.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/arch/mips/lantiq/xway/dma.c -+++ b/arch/mips/lantiq/xway/dma.c -@@ -47,6 +47,7 @@ - #define DMA_IRQ_ACK 0x7e /* IRQ status register */ - #define DMA_POLL BIT(31) /* turn on channel polling */ - #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */ -+#define DMA_4W_BURST BIT(2) /* 4 word burst length */ - #define DMA_2W_BURST BIT(1) /* 2 word burst length */ - #define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */ - #define DMA_ETOP_ENDIANESS (0xf << 8) /* endianess swap etop channels */ -@@ -195,7 +196,8 @@ ltq_dma_init_port(int p) - * Tell the DMA engine to swap the endianess of data frames and - * drop packets if the channel arbitration fails. - */ -- ltq_dma_w32_mask(0, DMA_ETOP_ENDIANESS | DMA_PDEN, -+ ltq_dma_w32_mask(0, (DMA_4W_BURST << 4) | (DMA_4W_BURST << 2) | -+ DMA_ETOP_ENDIANESS | DMA_PDEN, - LTQ_DMA_PCTRL); - break; - diff --git a/target/linux/lantiq/patches-3.7/0105-MIPS-lantiq-rework-external-irq-code.patch b/target/linux/lantiq/patches-3.7/0105-MIPS-lantiq-rework-external-irq-code.patch deleted file mode 100644 index 6f5ea2c764..0000000000 --- a/target/linux/lantiq/patches-3.7/0105-MIPS-lantiq-rework-external-irq-code.patch +++ /dev/null @@ -1,207 +0,0 @@ -From edd237c93d564e698e169a89d1b1b35248c5ef4a Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 3 Dec 2012 21:44:30 +0100 -Subject: [PATCH 105/123] MIPS: lantiq: rework external irq code - -This code makes the irqs used by the EIU loadable from the DT. Additionally we -add a helper that allows the pinctrl layer to map external irqs to real irq -numbers. - -Signed-off-by: John Crispin ---- - arch/mips/include/asm/mach-lantiq/lantiq.h | 1 + - arch/mips/lantiq/irq.c | 104 +++++++++++++++++++--------- - 2 files changed, 73 insertions(+), 32 deletions(-) - ---- a/arch/mips/include/asm/mach-lantiq/lantiq.h -+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h -@@ -34,6 +34,7 @@ extern spinlock_t ebu_lock; - extern void ltq_disable_irq(struct irq_data *data); - extern void ltq_mask_and_ack_irq(struct irq_data *data); - extern void ltq_enable_irq(struct irq_data *data); -+extern int ltq_eiu_get_irq(int exin); - - /* clock handling */ - extern int clk_activate(struct clk *clk); ---- a/arch/mips/lantiq/irq.c -+++ b/arch/mips/lantiq/irq.c -@@ -33,17 +33,10 @@ - /* register definitions - external irqs */ - #define LTQ_EIU_EXIN_C 0x0000 - #define LTQ_EIU_EXIN_INIC 0x0004 -+#define LTQ_EIU_EXIN_INC 0x0008 - #define LTQ_EIU_EXIN_INEN 0x000C - --/* irq numbers used by the external interrupt unit (EIU) */ --#define LTQ_EIU_IR0 (INT_NUM_IM4_IRL0 + 30) --#define LTQ_EIU_IR1 (INT_NUM_IM3_IRL0 + 31) --#define LTQ_EIU_IR2 (INT_NUM_IM1_IRL0 + 26) --#define LTQ_EIU_IR3 INT_NUM_IM1_IRL0 --#define LTQ_EIU_IR4 (INT_NUM_IM1_IRL0 + 1) --#define LTQ_EIU_IR5 (INT_NUM_IM1_IRL0 + 2) --#define LTQ_EIU_IR6 (INT_NUM_IM2_IRL0 + 30) --#define XWAY_EXIN_COUNT 3 -+/* number of external interrupts */ - #define MAX_EIU 6 - - /* the performance counter */ -@@ -72,20 +65,19 @@ - int gic_present; - #endif - --static unsigned short ltq_eiu_irq[MAX_EIU] = { -- LTQ_EIU_IR0, -- LTQ_EIU_IR1, -- LTQ_EIU_IR2, -- LTQ_EIU_IR3, -- LTQ_EIU_IR4, -- LTQ_EIU_IR5, --}; -- - static int exin_avail; -+static struct resource ltq_eiu_irq[MAX_EIU]; - static void __iomem *ltq_icu_membase[MAX_IM]; - static void __iomem *ltq_eiu_membase; - static struct irq_domain *ltq_domain; - -+int ltq_eiu_get_irq(int exin) -+{ -+ if (exin < exin_avail) -+ return ltq_eiu_irq[exin].start; -+ return -1; -+} -+ - void ltq_disable_irq(struct irq_data *d) - { - u32 ier = LTQ_ICU_IM0_IER; -@@ -128,19 +120,64 @@ void ltq_enable_irq(struct irq_data *d) - ltq_icu_w32(im, ltq_icu_r32(im, ier) | BIT(offset), ier); - } - -+static int ltq_eiu_settype(struct irq_data *d, unsigned int type) -+{ -+ int i; -+ -+ for (i = 0; i < MAX_EIU; i++) { -+ if (d->hwirq == ltq_eiu_irq[i].start) { -+ int val = 0; -+ int edge = 0; -+ -+ switch (type) { -+ case IRQF_TRIGGER_NONE: -+ break; -+ case IRQF_TRIGGER_RISING: -+ val = 1; -+ edge = 1; -+ break; -+ case IRQF_TRIGGER_FALLING: -+ val = 2; -+ edge = 1; -+ break; -+ case IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING: -+ val = 3; -+ edge = 1; -+ break; -+ case IRQF_TRIGGER_HIGH: -+ val = 5; -+ break; -+ case IRQF_TRIGGER_LOW: -+ val = 6; -+ break; -+ default: -+ pr_err("invalid type %d for irq %ld\n", type, d->hwirq); -+ return -EINVAL; -+ } -+ -+ if (edge) -+ irq_set_handler(d->hwirq, handle_edge_irq); -+ -+ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) | -+ (val << (i * 4)), LTQ_EIU_EXIN_C); -+ } -+ } -+ -+ return 0; -+} -+ - static unsigned int ltq_startup_eiu_irq(struct irq_data *d) - { - int i; - - ltq_enable_irq(d); - for (i = 0; i < MAX_EIU; i++) { -- if (d->hwirq == ltq_eiu_irq[i]) { -- /* low level - we should really handle set_type */ -- ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) | -- (0x6 << (i * 4)), LTQ_EIU_EXIN_C); -+ if (d->hwirq == ltq_eiu_irq[i].start) { -+ /* by default we are low level triggered */ -+ ltq_eiu_settype(d, IRQF_TRIGGER_LOW); - /* clear all pending */ -- ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~BIT(i), -- LTQ_EIU_EXIN_INIC); -+ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INC) & ~BIT(i), -+ LTQ_EIU_EXIN_INC); - /* enable */ - ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | BIT(i), - LTQ_EIU_EXIN_INEN); -@@ -157,7 +194,7 @@ static void ltq_shutdown_eiu_irq(struct - - ltq_disable_irq(d); - for (i = 0; i < MAX_EIU; i++) { -- if (d->hwirq == ltq_eiu_irq[i]) { -+ if (d->hwirq == ltq_eiu_irq[i].start) { - /* disable */ - ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~BIT(i), - LTQ_EIU_EXIN_INEN); -@@ -186,6 +223,7 @@ static struct irq_chip ltq_eiu_type = { - .irq_ack = ltq_ack_irq, - .irq_mask = ltq_disable_irq, - .irq_mask_ack = ltq_mask_and_ack_irq, -+ .irq_set_type = ltq_eiu_settype, - }; - - static void ltq_hw_irqdispatch(int module) -@@ -301,7 +339,7 @@ static int icu_map(struct irq_domain *d, - return 0; - - for (i = 0; i < exin_avail; i++) -- if (hw == ltq_eiu_irq[i]) -+ if (hw == ltq_eiu_irq[i].start) - chip = <q_eiu_type; - - irq_set_chip_and_handler(hw, chip, handle_level_irq); -@@ -323,7 +361,7 @@ int __init icu_of_init(struct device_nod - { - struct device_node *eiu_node; - struct resource res; -- int i; -+ int i, ret; - - for (i = 0; i < MAX_IM; i++) { - if (of_address_to_resource(node, i, &res)) -@@ -340,17 +378,19 @@ int __init icu_of_init(struct device_nod - } - - /* the external interrupts are optional and xway only */ -- eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu"); -+ eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway"); - if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) { - /* find out how many external irq sources we have */ -- const __be32 *count = of_get_property(node, -- "lantiq,count", NULL); -+ exin_avail = of_irq_count(eiu_node); - -- if (count) -- exin_avail = *count; - if (exin_avail > MAX_EIU) - exin_avail = MAX_EIU; - -+ ret = of_irq_to_resource_table(eiu_node, -+ ltq_eiu_irq, exin_avail); -+ if (ret != exin_avail) -+ panic("failed to load external irq resources\n"); -+ - if (request_mem_region(res.start, resource_size(&res), - res.name) < 0) - pr_err("Failed to request eiu memory"); diff --git a/target/linux/lantiq/patches-3.7/0106-MIPS-lantiq-adds-minimal-dcdc-driver.patch b/target/linux/lantiq/patches-3.7/0106-MIPS-lantiq-adds-minimal-dcdc-driver.patch deleted file mode 100644 index 7835e2c17a..0000000000 --- a/target/linux/lantiq/patches-3.7/0106-MIPS-lantiq-adds-minimal-dcdc-driver.patch +++ /dev/null @@ -1,98 +0,0 @@ -From 3aa46ed76b27df771f75db9c74ff011aca505fc5 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Wed, 5 Dec 2012 17:38:48 +0100 -Subject: [PATCH 106/123] MIPS: lantiq: adds minimal dcdc driver - -This driver so far only reads the core voltage. - -Signed-off-by: John Crispin ---- - arch/mips/lantiq/xway/Makefile | 2 +- - arch/mips/lantiq/xway/dcdc.c | 74 ++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 75 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/lantiq/xway/dcdc.c - ---- a/arch/mips/lantiq/xway/Makefile -+++ b/arch/mips/lantiq/xway/Makefile -@@ -1,3 +1,3 @@ --obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o -+obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o - - obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o ---- /dev/null -+++ b/arch/mips/lantiq/xway/dcdc.c -@@ -0,0 +1,74 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2012 John Crispin -+ * Copyright (C) 2010 Sameer Ahmad, Lantiq GmbH -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+/* Bias and regulator Setup Register */ -+#define DCDC_BIAS_VREG0 0xa -+/* Bias and regulator Setup Register */ -+#define DCDC_BIAS_VREG1 0xb -+ -+#define dcdc_w8(x, y) ltq_w8((x), dcdc_membase + (y)) -+#define dcdc_r8(x) ltq_r8(dcdc_membase + (x)) -+ -+static void __iomem *dcdc_membase; -+ -+static int __devinit dcdc_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "Failed to get resource\n"); -+ return -ENOMEM; -+ } -+ -+ /* remap dcdc register range */ -+ dcdc_membase = devm_request_and_ioremap(&pdev->dev, res); -+ if (!dcdc_membase) { -+ dev_err(&pdev->dev, "Failed to remap resource\n"); -+ return -ENOMEM; -+ } -+ -+ dev_info(&pdev->dev, "Core Voltage : %d mV\n", dcdc_r8(DCDC_BIAS_VREG1) * 8); -+ -+ return 0; -+} -+ -+static const struct of_device_id dcdc_match[] = { -+ { .compatible = "lantiq,dcdc-xrx200" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, dcdc_match); -+ -+static struct platform_driver dcdc_driver = { -+ .probe = dcdc_probe, -+ .driver = { -+ .name = "dcdc-xrx200", -+ .owner = THIS_MODULE, -+ .of_match_table = dcdc_match, -+ }, -+}; -+ -+int __init dcdc_init(void) -+{ -+ int ret = platform_driver_register(&dcdc_driver); -+ -+ if (ret) -+ pr_info("dcdc: Error registering platform driver\n"); -+ return ret; -+} -+ -+arch_initcall(dcdc_init); diff --git a/target/linux/lantiq/patches-3.7/0107-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch b/target/linux/lantiq/patches-3.7/0107-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch deleted file mode 100644 index 3f12cedf23..0000000000 --- a/target/linux/lantiq/patches-3.7/0107-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 84ce6d4b2802fd428a76e5f2692fd4c102ed35ea Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 30 Nov 2012 21:11:22 +0100 -Subject: [PATCH 107/123] PINCTRL: lantiq: pinconf uses port instead of pin - -The XWAY pinctrl driver invalidly uses the port and not the pin number to work -out the registeres and bits to be set for the opendrain and pullup/down -resistors. - -Signed-off-by: John Crispin ---- - drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++-------------- - 1 file changed, 14 insertions(+), 14 deletions(-) - ---- a/drivers/pinctrl/pinctrl-xway.c -+++ b/drivers/pinctrl/pinctrl-xway.c -@@ -441,17 +441,17 @@ static int xway_pinconf_get(struct pinct - if (port == PORT3) - reg = GPIO3_OD; - else -- reg = GPIO_OD(port); -+ reg = GPIO_OD(pin); - *config = LTQ_PINCONF_PACK(param, -- !!gpio_getbit(info->membase[0], reg, PORT_PIN(port))); -+ !!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))); - break; - - case LTQ_PINCONF_PARAM_PULL: - if (port == PORT3) - reg = GPIO3_PUDEN; - else -- reg = GPIO_PUDEN(port); -- if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) { -+ reg = GPIO_PUDEN(pin); -+ if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) { - *config = LTQ_PINCONF_PACK(param, 0); - break; - } -@@ -459,8 +459,8 @@ static int xway_pinconf_get(struct pinct - if (port == PORT3) - reg = GPIO3_PUDSEL; - else -- reg = GPIO_PUDSEL(port); -- if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) -+ reg = GPIO_PUDSEL(pin); -+ if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) - *config = LTQ_PINCONF_PACK(param, 2); - else - *config = LTQ_PINCONF_PACK(param, 1); -@@ -488,29 +488,29 @@ static int xway_pinconf_set(struct pinct - if (port == PORT3) - reg = GPIO3_OD; - else -- reg = GPIO_OD(port); -- gpio_setbit(info->membase[0], reg, PORT_PIN(port)); -+ reg = GPIO_OD(pin); -+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); - break; - - case LTQ_PINCONF_PARAM_PULL: - if (port == PORT3) - reg = GPIO3_PUDEN; - else -- reg = GPIO_PUDEN(port); -+ reg = GPIO_PUDEN(pin); - if (arg == 0) { -- gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); -+ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); - break; - } -- gpio_setbit(info->membase[0], reg, PORT_PIN(port)); -+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); - - if (port == PORT3) - reg = GPIO3_PUDSEL; - else -- reg = GPIO_PUDSEL(port); -+ reg = GPIO_PUDSEL(pin); - if (arg == 1) -- gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); -+ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); - else if (arg == 2) -- gpio_setbit(info->membase[0], reg, PORT_PIN(port)); -+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); - else - dev_err(pctldev->dev, "Invalid pull value %d\n", arg); - break; diff --git a/target/linux/lantiq/patches-3.7/0108-PINCTRL-lantiq-fixes.patch b/target/linux/lantiq/patches-3.7/0108-PINCTRL-lantiq-fixes.patch deleted file mode 100644 index db9662bef6..0000000000 --- a/target/linux/lantiq/patches-3.7/0108-PINCTRL-lantiq-fixes.patch +++ /dev/null @@ -1,275 +0,0 @@ -From 13e754b5fff5be1930e2b8fe534a52b608c9e479 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 3 Dec 2012 19:27:28 +0100 -Subject: [PATCH] PINCTRL: lantiq: fixes - ---- - drivers/pinctrl/pinctrl-lantiq.c | 54 ++++++++++++++++++----------- - drivers/pinctrl/pinctrl-lantiq.h | 1 + - drivers/pinctrl/pinctrl-xway.c | 70 ++++++++++++++++++++++++++++++++++---- - 3 files changed, 99 insertions(+), 26 deletions(-) - ---- a/drivers/pinctrl/pinctrl-lantiq.c -+++ b/drivers/pinctrl/pinctrl-lantiq.c -@@ -64,11 +64,13 @@ static void ltq_pinctrl_pin_dbg_show(str - seq_printf(s, " %s", dev_name(pctldev->dev)); - } - --static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, -+static void ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, - struct device_node *np, - struct pinctrl_map **map) - { - struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); -+ struct property *pins = of_find_property(np, "lantiq,pins", NULL); -+ struct property *groups = of_find_property(np, "lantiq,groups", NULL); - unsigned long configs[3]; - unsigned num_configs = 0; - struct property *prop; -@@ -76,8 +78,20 @@ static int ltq_pinctrl_dt_subnode_to_map - const char *function; - int ret, i; - -+ if (!pins && !groups) { -+ dev_err(pctldev->dev, "%s defines neither pins nor groups\n", -+ np->name); -+ return; -+ } -+ -+ if (pins && groups) { -+ dev_err(pctldev->dev, "%s defines both pins and groups\n", -+ np->name); -+ return; -+ } -+ - ret = of_property_read_string(np, "lantiq,function", &function); -- if (!ret) { -+ if (groups && !ret) { - of_property_for_each_string(np, "lantiq,groups", prop, group) { - (*map)->type = PIN_MAP_TYPE_MUX_GROUP; - (*map)->name = function; -@@ -85,11 +99,6 @@ static int ltq_pinctrl_dt_subnode_to_map - (*map)->data.mux.function = function; - (*map)++; - } -- if (of_find_property(np, "lantiq,pins", NULL)) -- dev_err(pctldev->dev, -- "%s mixes pins and groups settings\n", -- np->name); -- return 0; - } - - for (i = 0; i < info->num_params; i++) { -@@ -103,7 +112,7 @@ static int ltq_pinctrl_dt_subnode_to_map - } - - if (!num_configs) -- return -EINVAL; -+ return; - - of_property_for_each_string(np, "lantiq,pins", prop, pin) { - (*map)->data.configs.configs = kmemdup(configs, -@@ -115,7 +124,16 @@ static int ltq_pinctrl_dt_subnode_to_map - (*map)->data.configs.num_configs = num_configs; - (*map)++; - } -- return 0; -+ of_property_for_each_string(np, "lantiq,groups", prop, group) { -+ (*map)->data.configs.configs = kmemdup(configs, -+ num_configs * sizeof(unsigned long), -+ GFP_KERNEL); -+ (*map)->type = PIN_MAP_TYPE_CONFIGS_GROUP; -+ (*map)->name = group; -+ (*map)->data.configs.group_or_pin = group; -+ (*map)->data.configs.num_configs = num_configs; -+ (*map)++; -+ } - } - - static int ltq_pinctrl_dt_subnode_size(struct device_node *np) -@@ -135,23 +153,19 @@ int ltq_pinctrl_dt_node_to_map(struct pi - { - struct pinctrl_map *tmp; - struct device_node *np; -- int ret; -+ int max_maps = 0; - -- *num_maps = 0; - for_each_child_of_node(np_config, np) -- *num_maps += ltq_pinctrl_dt_subnode_size(np); -- *map = kzalloc(*num_maps * sizeof(struct pinctrl_map), GFP_KERNEL); -+ max_maps += ltq_pinctrl_dt_subnode_size(np); -+ *map = kzalloc(max_maps * sizeof(struct pinctrl_map) * 2, GFP_KERNEL); - if (!*map) - return -ENOMEM; - tmp = *map; - -- for_each_child_of_node(np_config, np) { -- ret = ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp); -- if (ret < 0) { -- ltq_pinctrl_dt_free_map(pctldev, *map, *num_maps); -- return ret; -- } -- } -+ for_each_child_of_node(np_config, np) -+ ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp); -+ *num_maps = ((int)(tmp - *map)); -+ - return 0; - } - ---- a/drivers/pinctrl/pinctrl-lantiq.h -+++ b/drivers/pinctrl/pinctrl-lantiq.h -@@ -34,6 +34,7 @@ enum ltq_pinconf_param { - LTQ_PINCONF_PARAM_OPEN_DRAIN, - LTQ_PINCONF_PARAM_DRIVE_CURRENT, - LTQ_PINCONF_PARAM_SLEW_RATE, -+ LTQ_PINCONF_PARAM_OUTPUT, - }; - - struct ltq_cfg_param { ---- a/drivers/pinctrl/pinctrl-xway.c -+++ b/drivers/pinctrl/pinctrl-xway.c -@@ -443,7 +443,7 @@ static int xway_pinconf_get(struct pinct - else - reg = GPIO_OD(pin); - *config = LTQ_PINCONF_PACK(param, -- !!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))); -+ !gpio_getbit(info->membase[0], reg, PORT_PIN(pin))); - break; - - case LTQ_PINCONF_PARAM_PULL: -@@ -466,6 +466,11 @@ static int xway_pinconf_get(struct pinct - *config = LTQ_PINCONF_PACK(param, 1); - break; - -+ case LTQ_PINCONF_PARAM_OUTPUT: -+ reg = GPIO_DIR(pin); -+ *config = LTQ_PINCONF_PACK(param, -+ gpio_getbit(info->membase[0], reg, PORT_PIN(pin))); -+ break; - default: - dev_err(pctldev->dev, "Invalid config param %04x\n", param); - return -ENOTSUPP; -@@ -489,7 +494,10 @@ static int xway_pinconf_set(struct pinct - reg = GPIO3_OD; - else - reg = GPIO_OD(pin); -- gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); -+ if (arg == 0) -+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); -+ else -+ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); - break; - - case LTQ_PINCONF_PARAM_PULL: -@@ -515,6 +523,14 @@ static int xway_pinconf_set(struct pinct - dev_err(pctldev->dev, "Invalid pull value %d\n", arg); - break; - -+ case LTQ_PINCONF_PARAM_OUTPUT: -+ reg = GPIO_DIR(pin); -+ if (arg == 0) -+ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); -+ else -+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); -+ break; -+ - default: - dev_err(pctldev->dev, "Invalid config param %04x\n", param); - return -ENOTSUPP; -@@ -522,9 +538,25 @@ static int xway_pinconf_set(struct pinct - return 0; - } - -+int xway_pinconf_group_set(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ unsigned long config) -+{ -+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); -+ int i, ret = 0; -+ -+ for (i = 0; i < info->grps[selector].npins && !ret; i++) -+ ret = xway_pinconf_set(pctldev, -+ info->grps[selector].pins[i], config); -+ -+ return ret; -+} -+ -+ - struct pinconf_ops xway_pinconf_ops = { - .pin_config_get = xway_pinconf_get, - .pin_config_set = xway_pinconf_set, -+ .pin_config_group_set = xway_pinconf_group_set, - }; - - static struct pinctrl_desc xway_pctrl_desc = { -@@ -532,10 +564,9 @@ static struct pinctrl_desc xway_pctrl_de - .confops = &xway_pinconf_ops, - }; - --static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, -+static int mux_apply(struct ltq_pinmux_info *info, - int pin, int mux) - { -- struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); - int port = PORT(pin); - u32 alt1_reg = GPIO_ALT1(pin); - -@@ -555,9 +586,18 @@ static inline int xway_mux_apply(struct - return 0; - } - -+static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, -+ int pin, int mux) -+{ -+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); -+ -+ return mux_apply(info, pin, mux); -+} -+ - static const struct ltq_cfg_param xway_cfg_params[] = { - {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, - {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, -+ {"lantiq,output", LTQ_PINCONF_PARAM_OUTPUT}, - }; - - static struct ltq_pinmux_info xway_info = { -@@ -598,6 +638,10 @@ static int xway_gpio_dir_out(struct gpio - { - struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); - -+ if (PORT(pin) == PORT3) -+ gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin)); -+ else -+ gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin)); - gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); - xway_gpio_set(chip, pin, val); - -@@ -618,6 +662,18 @@ static void xway_gpio_free(struct gpio_c - pinctrl_free_gpio(gpio); - } - -+static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -+{ -+ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); -+ int i; -+ -+ for (i = 0; i < info->num_exin; i++) -+ if (info->exin[i] == offset) -+ return ltq_eiu_get_irq(i); -+ -+ return -1; -+} -+ - static struct gpio_chip xway_chip = { - .label = "gpio-xway", - .direction_input = xway_gpio_dir_in, -@@ -626,6 +682,7 @@ static struct gpio_chip xway_chip = { - .set = xway_gpio_set, - .request = xway_gpio_req, - .free = xway_gpio_free, -+ .to_irq = xway_gpio_to_irq, - .base = -1, - }; - diff --git a/target/linux/lantiq/patches-3.7/0109-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch b/target/linux/lantiq/patches-3.7/0109-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch deleted file mode 100644 index 3d9e13b292..0000000000 --- a/target/linux/lantiq/patches-3.7/0109-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch +++ /dev/null @@ -1,394 +0,0 @@ -From d4911be1cc44c8d3ca72b03d5da13f792d4a02d2 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sat, 23 Jun 2012 15:32:33 +0200 -Subject: [PATCH 109/123] GPIO: MIPS: add gpio driver for falcon SoC - -Add driver for GPIO blocks found on Lantiq FALCON SoC. The SoC has 5 banks of -up to 32 pads. The GPIO blocks have a per pin IRQs. - -Signed-off-by: John Crispin -Signed-off-by: Thomas Langer -Cc: linux-kernel@vger.kernel.org ---- - drivers/gpio/Kconfig | 5 + - drivers/gpio/Makefile | 1 + - drivers/gpio/gpio-falcon.c | 349 ++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 355 insertions(+) - create mode 100644 drivers/gpio/gpio-falcon.c - ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -114,6 +114,11 @@ config GPIO_EP93XX - depends on ARCH_EP93XX - select GPIO_GENERIC - -+config GPIO_FALCON -+ def_bool y -+ depends on MIPS && SOC_FALCON -+ select GPIO_GENERIC -+ - config GPIO_MM_LANTIQ - bool "Lantiq Memory mapped GPIOs" - depends on LANTIQ && SOC_XWAY ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_GPIO_DA9052) += gpio-da9052 - obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o - obj-$(CONFIG_GPIO_EM) += gpio-em.o - obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o -+obj-$(CONFIG_GPIO_FALCON) += gpio-falcon.o - obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o - obj-$(CONFIG_GPIO_ICH) += gpio-ich.o - obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o ---- /dev/null -+++ b/drivers/gpio/gpio-falcon.c -@@ -0,0 +1,349 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2012 Thomas Langer -+ * Copyright (C) 2012 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+/* Data Output Register */ -+#define GPIO_OUT 0x00000000 -+/* Data Input Register */ -+#define GPIO_IN 0x00000004 -+/* Direction Register */ -+#define GPIO_DIR 0x00000008 -+/* External Interrupt Control Register 0 */ -+#define GPIO_EXINTCR0 0x00000018 -+/* External Interrupt Control Register 1 */ -+#define GPIO_EXINTCR1 0x0000001C -+/* IRN Capture Register */ -+#define GPIO_IRNCR 0x00000020 -+/* IRN Interrupt Configuration Register */ -+#define GPIO_IRNCFG 0x0000002C -+/* IRN Interrupt Enable Set Register */ -+#define GPIO_IRNRNSET 0x00000030 -+/* IRN Interrupt Enable Clear Register */ -+#define GPIO_IRNENCLR 0x00000034 -+/* Output Set Register */ -+#define GPIO_OUTSET 0x00000040 -+/* Output Cler Register */ -+#define GPIO_OUTCLR 0x00000044 -+/* Direction Clear Register */ -+#define GPIO_DIRSET 0x00000048 -+/* Direction Set Register */ -+#define GPIO_DIRCLR 0x0000004C -+ -+/* turn a gpio_chip into a falcon_gpio_port */ -+#define ctop(c) container_of(c, struct falcon_gpio_port, gpio_chip) -+/* turn a irq_data into a falcon_gpio_port */ -+#define itop(i) ((struct falcon_gpio_port *) irq_get_chip_data(i->irq)) -+ -+#define port_r32(p, reg) ltq_r32(p->port + reg) -+#define port_w32(p, val, reg) ltq_w32(val, p->port + reg) -+#define port_w32_mask(p, clear, set, reg) \ -+ port_w32(p, (port_r32(p, reg) & ~(clear)) | (set), reg) -+ -+#define MAX_PORTS 5 -+#define PINS_PER_PORT 32 -+ -+struct falcon_gpio_port { -+ struct gpio_chip gpio_chip; -+ void __iomem *port; -+ unsigned int irq_base; -+ unsigned int chained_irq; -+ struct clk *clk; -+ char name[6]; -+}; -+ -+static int falcon_gpio_direction_input(struct gpio_chip *chip, -+ unsigned int offset) -+{ -+ port_w32(ctop(chip), 1 << offset, GPIO_DIRCLR); -+ -+ return 0; -+} -+ -+static void falcon_gpio_set(struct gpio_chip *chip, unsigned int offset, -+ int value) -+{ -+ if (value) -+ port_w32(ctop(chip), 1 << offset, GPIO_OUTSET); -+ else -+ port_w32(ctop(chip), 1 << offset, GPIO_OUTCLR); -+} -+ -+static int falcon_gpio_direction_output(struct gpio_chip *chip, -+ unsigned int offset, int value) -+{ -+ falcon_gpio_set(chip, offset, value); -+ port_w32(ctop(chip), 1 << offset, GPIO_DIRSET); -+ -+ return 0; -+} -+ -+static int falcon_gpio_get(struct gpio_chip *chip, unsigned int offset) -+{ -+ if ((port_r32(ctop(chip), GPIO_DIR) >> offset) & 1) -+ return (port_r32(ctop(chip), GPIO_OUT) >> offset) & 1; -+ else -+ return (port_r32(ctop(chip), GPIO_IN) >> offset) & 1; -+} -+ -+static int falcon_gpio_request(struct gpio_chip *chip, unsigned offset) -+{ -+ int gpio = chip->base + offset; -+ -+ return pinctrl_request_gpio(gpio); -+} -+ -+static void falcon_gpio_free(struct gpio_chip *chip, unsigned offset) -+{ -+ int gpio = chip->base + offset; -+ -+ pinctrl_free_gpio(gpio); -+} -+ -+static int falcon_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -+{ -+ return ctop(chip)->irq_base + offset; -+} -+ -+static void falcon_gpio_disable_irq(struct irq_data *d) -+{ -+ unsigned int offset = d->irq - itop(d)->irq_base; -+ -+ port_w32(itop(d), 1 << offset, GPIO_IRNENCLR); -+} -+ -+static void falcon_gpio_enable_irq(struct irq_data *d) -+{ -+ unsigned int offset = d->irq - itop(d)->irq_base; -+ -+ port_w32(itop(d), 1 << offset, GPIO_IRNRNSET); -+} -+ -+static void falcon_gpio_ack_irq(struct irq_data *d) -+{ -+ unsigned int offset = d->irq - itop(d)->irq_base; -+ -+ port_w32(itop(d), 1 << offset, GPIO_IRNCR); -+} -+ -+static void falcon_gpio_mask_and_ack_irq(struct irq_data *d) -+{ -+ unsigned int offset = d->irq - itop(d)->irq_base; -+ -+ port_w32(itop(d), 1 << offset, GPIO_IRNENCLR); -+ port_w32(itop(d), 1 << offset, GPIO_IRNCR); -+} -+ -+static struct irq_chip falcon_gpio_irq_chip; -+static int falcon_gpio_irq_type(struct irq_data *d, unsigned int type) -+{ -+ unsigned int offset = d->irq - itop(d)->irq_base; -+ unsigned int mask = 1 << offset; -+ -+ if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE) -+ return 0; -+ -+ if ((type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) != 0) { -+ /* level triggered */ -+ port_w32_mask(itop(d), 0, mask, GPIO_IRNCFG); -+ irq_set_chip_and_handler_name(d->irq, -+ &falcon_gpio_irq_chip, handle_level_irq, "mux"); -+ } else { -+ /* edge triggered */ -+ port_w32_mask(itop(d), mask, 0, GPIO_IRNCFG); -+ irq_set_chip_and_handler_name(d->irq, -+ &falcon_gpio_irq_chip, handle_simple_irq, "mux"); -+ } -+ -+ if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { -+ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR0); -+ port_w32_mask(itop(d), 0, mask, GPIO_EXINTCR1); -+ } else { -+ if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) != 0) -+ /* positive logic: rising edge, high level */ -+ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR0); -+ else -+ /* negative logic: falling edge, low level */ -+ port_w32_mask(itop(d), 0, mask, GPIO_EXINTCR0); -+ port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR1); -+ } -+ -+ return gpio_direction_input(itop(d)->gpio_chip.base + offset); -+} -+ -+static void falcon_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -+{ -+ struct falcon_gpio_port *gpio_port = irq_desc_get_handler_data(desc); -+ unsigned long irncr; -+ int offset; -+ -+ /* acknowledge interrupt */ -+ irncr = port_r32(gpio_port, GPIO_IRNCR); -+ port_w32(gpio_port, irncr, GPIO_IRNCR); -+ -+ desc->irq_data.chip->irq_ack(&desc->irq_data); -+ -+ for_each_set_bit(offset, &irncr, gpio_port->gpio_chip.ngpio) -+ generic_handle_irq(gpio_port->irq_base + offset); -+} -+ -+static int falcon_gpio_irq_map(struct irq_domain *d, unsigned int irq, -+ irq_hw_number_t hw) -+{ -+ struct falcon_gpio_port *port = d->host_data; -+ -+ irq_set_chip_and_handler_name(irq, &falcon_gpio_irq_chip, -+ handle_simple_irq, "mux"); -+ irq_set_chip_data(irq, port); -+ -+ /* set to negative logic (falling edge, low level) */ -+ port_w32_mask(port, 0, 1 << hw, GPIO_EXINTCR0); -+ return 0; -+} -+ -+static struct irq_chip falcon_gpio_irq_chip = { -+ .name = "gpio_irq_mux", -+ .irq_mask = falcon_gpio_disable_irq, -+ .irq_unmask = falcon_gpio_enable_irq, -+ .irq_ack = falcon_gpio_ack_irq, -+ .irq_mask_ack = falcon_gpio_mask_and_ack_irq, -+ .irq_set_type = falcon_gpio_irq_type, -+}; -+ -+static const struct irq_domain_ops irq_domain_ops = { -+ .xlate = irq_domain_xlate_onetwocell, -+ .map = falcon_gpio_irq_map, -+}; -+ -+static struct irqaction gpio_cascade = { -+ .handler = no_action, -+ .flags = IRQF_DISABLED, -+ .name = "gpio_cascade", -+}; -+ -+static int falcon_gpio_probe(struct platform_device *pdev) -+{ -+ struct pinctrl_gpio_range *gpio_range; -+ struct device_node *node = pdev->dev.of_node; -+ const __be32 *bank = of_get_property(node, "lantiq,bank", NULL); -+ struct falcon_gpio_port *gpio_port; -+ struct resource *gpiores, irqres; -+ int ret, size; -+ -+ if (!bank || *bank >= MAX_PORTS) -+ return -ENODEV; -+ -+ size = pinctrl_falcon_get_range_size(*bank); -+ if (size < 1) { -+ dev_err(&pdev->dev, "pad not loaded for bank %d\n", *bank); -+ return size; -+ } -+ -+ gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!gpiores) -+ return -ENODEV; -+ -+ gpio_range = devm_kzalloc(&pdev->dev, sizeof(struct pinctrl_gpio_range), -+ GFP_KERNEL); -+ if (!gpio_range) -+ return -ENOMEM; -+ -+ gpio_port = devm_kzalloc(&pdev->dev, sizeof(struct falcon_gpio_port), -+ GFP_KERNEL); -+ if (!gpio_port) -+ return -ENOMEM; -+ snprintf(gpio_port->name, 6, "gpio%d", *bank); -+ gpio_port->gpio_chip.label = gpio_port->name; -+ gpio_port->gpio_chip.direction_input = falcon_gpio_direction_input; -+ gpio_port->gpio_chip.direction_output = falcon_gpio_direction_output; -+ gpio_port->gpio_chip.get = falcon_gpio_get; -+ gpio_port->gpio_chip.set = falcon_gpio_set; -+ gpio_port->gpio_chip.request = falcon_gpio_request; -+ gpio_port->gpio_chip.free = falcon_gpio_free; -+ gpio_port->gpio_chip.base = -1; -+ gpio_port->gpio_chip.ngpio = size; -+ gpio_port->gpio_chip.dev = &pdev->dev; -+ -+ gpio_port->port = devm_request_and_ioremap(&pdev->dev, gpiores); -+ if (!gpio_port->port) { -+ dev_err(&pdev->dev, "Could not map io ranges\n"); -+ return -ENOMEM; -+ } -+ -+ gpio_port->clk = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(gpio_port->clk)) { -+ dev_err(&pdev->dev, "Could not get clock\n"); -+ return PTR_ERR(gpio_port->clk); -+ } -+ clk_enable(gpio_port->clk); -+ -+ if (of_irq_to_resource_table(node, &irqres, 1) == 1) { -+ gpio_port->irq_base = INT_NUM_EXTRA_START + (32 * *bank); -+ gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq; -+ gpio_port->chained_irq = irqres.start; -+ irq_domain_add_legacy(node, size, gpio_port->irq_base, 0, -+ &irq_domain_ops, gpio_port); -+ setup_irq(irqres.start, &gpio_cascade); -+ irq_set_handler_data(irqres.start, gpio_port); -+ irq_set_chained_handler(irqres.start, falcon_gpio_irq_handler); -+ } -+ -+ ret = gpiochip_add(&gpio_port->gpio_chip); -+ if (!ret) -+ platform_set_drvdata(pdev, gpio_port); -+ -+ gpio_range->name = "FALCON GPIO"; -+ gpio_range->id = *bank; -+ gpio_range->base = gpio_port->gpio_chip.base; -+ gpio_range->npins = gpio_port->gpio_chip.ngpio; -+ gpio_range->gc = &gpio_port->gpio_chip; -+ pinctrl_falcon_add_gpio_range(gpio_range); -+ -+ return ret; -+} -+ -+static const struct of_device_id falcon_gpio_match[] = { -+ { .compatible = "lantiq,gpio-falcon" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, falcon_gpio_match); -+ -+static struct platform_driver falcon_gpio_driver = { -+ .probe = falcon_gpio_probe, -+ .driver = { -+ .name = "gpio-falcon", -+ .owner = THIS_MODULE, -+ .of_match_table = falcon_gpio_match, -+ }, -+}; -+ -+int __init falcon_gpio_init(void) -+{ -+ int ret; -+ -+ pr_info("FALC(tm) ON GPIO Driver, (C) 2012 Lantiq Deutschland Gmbh\n"); -+ ret = platform_driver_register(&falcon_gpio_driver); -+ if (ret) -+ pr_err("falcon_gpio: Error registering platform driver!"); -+ return ret; -+} -+ -+subsys_initcall(falcon_gpio_init); diff --git a/target/linux/lantiq/patches-3.7/0110-Document-devicetree-add-OF-documents-for-lantiq-seri.patch b/target/linux/lantiq/patches-3.7/0110-Document-devicetree-add-OF-documents-for-lantiq-seri.patch deleted file mode 100644 index 8afa6151d0..0000000000 --- a/target/linux/lantiq/patches-3.7/0110-Document-devicetree-add-OF-documents-for-lantiq-seri.patch +++ /dev/null @@ -1,33 +0,0 @@ -From ed881db69430dd62765d02e2f4f1321ddc2f5fb5 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 20 Jul 2012 18:58:34 +0200 -Subject: [PATCH 110/123] Document: devicetree: add OF documents for lantiq - serial port - -Signed-off-by: John Crispin -Cc: Rob Herring -Cc: devicetree-discuss@lists.ozlabs.org ---- - .../devicetree/bindings/serial/lantiq_asc.txt | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - create mode 100644 Documentation/devicetree/bindings/serial/lantiq_asc.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt -@@ -0,0 +1,16 @@ -+Lantiq SoC ASC serial controller -+ -+Required properties: -+- compatible : Should be "lantiq,asc" -+- reg : Address and length of the register set for the device -+- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier -+ depends on the interrupt-parent interrupt controller. -+ -+Example: -+ -+asc1: serial@E100C00 { -+ compatible = "lantiq,asc"; -+ reg = <0xE100C00 0x400>; -+ interrupt-parent = <&icu0>; -+ interrupts = <112 113 114>; -+}; diff --git a/target/linux/lantiq/patches-3.7/0111-MTD-MIPS-lantiq-Add-NAND-support-on-Lantiq-FALCON-So.patch b/target/linux/lantiq/patches-3.7/0111-MTD-MIPS-lantiq-Add-NAND-support-on-Lantiq-FALCON-So.patch deleted file mode 100644 index 03f0e15d59..0000000000 --- a/target/linux/lantiq/patches-3.7/0111-MTD-MIPS-lantiq-Add-NAND-support-on-Lantiq-FALCON-So.patch +++ /dev/null @@ -1,129 +0,0 @@ -From 72112b91624dca6c636bd3a592471642d3988b27 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 20 Jul 2012 19:09:01 +0200 -Subject: [PATCH 111/123] MTD: MIPS: lantiq: Add NAND support on Lantiq FALCON - SoC. - -The driver uses plat_nand. As the platform_device is loaded from DT, we need -to lookup the node and attach our falocn specific "struct platform_nand_data" -to it. - -Signed-off-by: John Crispin -Cc: Artem Bityutskiy -Cc: linux-mtd@lists.infradead.org ---- - drivers/mtd/nand/Kconfig | 8 ++++ - drivers/mtd/nand/Makefile | 1 + - drivers/mtd/nand/falcon_nand.c | 82 ++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 91 insertions(+) - create mode 100644 drivers/mtd/nand/falcon_nand.c - ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -572,4 +572,12 @@ config MTD_NAND_XWAY - Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached - to the External Bus Unit (EBU). - -+config MTD_NAND_FALCON -+ tristate "Support for NAND on Lantiq FALC-ON SoC" -+ depends on LANTIQ && SOC_FALCON -+ select MTD_NAND_PLATFORM -+ help -+ Enables support for NAND Flash chips on Lantiq FALC-ON SoCs. NAND is -+ attached to the External Bus Unit (EBU). -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -53,5 +53,6 @@ obj-$(CONFIG_MTD_NAND_RICOH) += r852.o - obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o - obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ - obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o -+obj-$(CONFIG_MTD_NAND_FALCON) += falcon_nand.o - - nand-objs := nand_base.o nand_bbt.o ---- /dev/null -+++ b/drivers/mtd/nand/falcon_nand.c -@@ -0,0 +1,82 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2011 Thomas Langer -+ * Copyright (C) 2011 John Crispin -+ */ -+ -+#include -+#include -+ -+#include -+ -+/* nand flash */ -+/* address lines used for NAND control signals */ -+#define NAND_ADDR_ALE 0x10000 -+#define NAND_ADDR_CLE 0x20000 -+/* Ready/Busy Status */ -+#define MODCON_STS 0x0002 -+/* Ready/Busy Status Edge */ -+#define MODCON_STSEDGE 0x0004 -+#define LTQ_EBU_MODCON 0x000C -+ -+static const char *part_probes[] = { "cmdlinepart", "ofpart", NULL }; -+ -+static int falcon_nand_ready(struct mtd_info *mtd) -+{ -+ u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON); -+ -+ return (((modcon & (MODCON_STS | MODCON_STSEDGE)) == -+ (MODCON_STS | MODCON_STSEDGE))); -+} -+ -+static void falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -+{ -+ struct nand_chip *this = mtd->priv; -+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; -+ -+ if (ctrl & NAND_CTRL_CHANGE) { -+ nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE); -+ -+ if (ctrl & NAND_CLE) -+ nandaddr |= NAND_ADDR_CLE; -+ if (ctrl & NAND_ALE) -+ nandaddr |= NAND_ADDR_ALE; -+ -+ this->IO_ADDR_W = (void __iomem *) nandaddr; -+ } -+ -+ if (cmd != NAND_CMD_NONE) -+ writeb(cmd, this->IO_ADDR_W); -+} -+ -+static struct platform_nand_data falcon_nand_data = { -+ .chip = { -+ .nr_chips = 1, -+ .chip_delay = 25, -+ .part_probe_types = part_probes, -+ }, -+ .ctrl = { -+ .cmd_ctrl = falcon_hwcontrol, -+ .dev_ready = falcon_nand_ready, -+ } -+}; -+ -+static int __init falcon_register_nand(void) -+{ -+ struct device_node *node; -+ struct platform_device *pdev; -+ -+ node = of_find_compatible_node(NULL, NULL, "lantiq,nand-falcon"); -+ if (!node) -+ return -1; -+ pdev = of_find_device_by_node(node); -+ if (pdev) -+ pdev->dev.platform_data = &falcon_nand_data; -+ of_node_put(node); -+ return 0; -+} -+ -+arch_initcall(falcon_register_nand); diff --git a/target/linux/lantiq/patches-3.7/0112-MTD-lantiq-xway-fix-NAND-reset-timeout-handling.patch b/target/linux/lantiq/patches-3.7/0112-MTD-lantiq-xway-fix-NAND-reset-timeout-handling.patch deleted file mode 100644 index ac837e4ffa..0000000000 --- a/target/linux/lantiq/patches-3.7/0112-MTD-lantiq-xway-fix-NAND-reset-timeout-handling.patch +++ /dev/null @@ -1,42 +0,0 @@ -From d8d9b9055d704d6f84ef6346d6826b8a9640f209 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 22 Oct 2012 10:25:39 +0200 -Subject: [PATCH 112/123] MTD: lantiq: xway: fix NAND reset timeout handling - -Fixes a possible deadlock in the code that resets the NAND flash. - -http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html - -Signed-off-by: John Crispin ---- - drivers/mtd/nand/xway_nand.c | 12 ++++++++++-- - 1 file changed, 10 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/nand/xway_nand.c -+++ b/drivers/mtd/nand/xway_nand.c -@@ -58,15 +58,23 @@ static void xway_reset_chip(struct nand_ - { - unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W; - unsigned long flags; -+ unsigned long timeout; - - nandaddr &= ~NAND_WRITE_ADDR; - nandaddr |= NAND_WRITE_CMD; - - /* finish with a reset */ -+ timeout = jiffies + msecs_to_jiffies(200); -+ - spin_lock_irqsave(&ebu_lock, flags); -+ - writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr); -- while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) -- ; -+ do { -+ if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) -+ break; -+ cond_resched(); -+ } while (!time_after_eq(jiffies, timeout)); -+ - spin_unlock_irqrestore(&ebu_lock, flags); - } - diff --git a/target/linux/lantiq/patches-3.7/0113-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.7/0113-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch deleted file mode 100644 index 45db21e8e4..0000000000 --- a/target/linux/lantiq/patches-3.7/0113-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch +++ /dev/null @@ -1,1034 +0,0 @@ -From f2ac37c0a5297ca4663da9e4328c77736504b484 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 20 May 2012 00:42:39 +0200 -Subject: [PATCH 113/123] I2C: MIPS: lantiq: add FALC-ON i2c bus master - -This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs. - -Signed-off-by: Thomas Langer -Signed-off-by: John Crispin ---- - drivers/i2c/busses/Kconfig | 10 + - drivers/i2c/busses/Makefile | 1 + - drivers/i2c/busses/i2c-lantiq.c | 747 +++++++++++++++++++++++++++++++++++++++ - drivers/i2c/busses/i2c-lantiq.h | 234 ++++++++++++ - 4 files changed, 992 insertions(+) - create mode 100644 drivers/i2c/busses/i2c-lantiq.c - create mode 100644 drivers/i2c/busses/i2c-lantiq.h - ---- a/drivers/i2c/busses/Kconfig -+++ b/drivers/i2c/busses/Kconfig -@@ -460,6 +460,16 @@ config I2C_IOP3XX - This driver can also be built as a module. If so, the module - will be called i2c-iop3xx. - -+config I2C_LANTIQ -+ tristate "Lantiq I2C interface" -+ depends on LANTIQ && SOC_FALCON -+ help -+ If you say yes to this option, support will be included for the -+ Lantiq I2C core. -+ -+ This driver can also be built as a module. If so, the module -+ will be called i2c-lantiq. -+ - config I2C_MPC - tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx" - depends on PPC ---- a/drivers/i2c/busses/Makefile -+++ b/drivers/i2c/busses/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic - obj-$(CONFIG_I2C_IMX) += i2c-imx.o - obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o - obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o -+obj-$(CONFIG_I2C_LANTIQ) += i2c-lantiq.o - obj-$(CONFIG_I2C_MPC) += i2c-mpc.o - obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o - obj-$(CONFIG_I2C_MXS) += i2c-mxs.o ---- /dev/null -+++ b/drivers/i2c/busses/i2c-lantiq.c -@@ -0,0 +1,747 @@ -+ -+/* -+ * Lantiq I2C bus adapter -+ * -+ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * Copyright (C) 2012 Thomas Langer -+ */ -+ -+#include -+#include -+#include -+#include /* for kzalloc, kfree */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include "i2c-lantiq.h" -+ -+/* -+ * CURRENT ISSUES: -+ * - no high speed support -+ * - ten bit mode is not tested (no slave devices) -+ */ -+ -+/* access macros */ -+#define i2c_r32(reg) \ -+ __raw_readl(&(priv->membase)->reg) -+#define i2c_w32(val, reg) \ -+ __raw_writel(val, &(priv->membase)->reg) -+#define i2c_w32_mask(clear, set, reg) \ -+ i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg) -+ -+#define DRV_NAME "i2c-lantiq" -+#define DRV_VERSION "1.00" -+ -+#define LTQ_I2C_BUSY_TIMEOUT 20 /* ms */ -+ -+#ifdef DEBUG -+#define LTQ_I2C_XFER_TIMEOUT (25*HZ) -+#else -+#define LTQ_I2C_XFER_TIMEOUT HZ -+#endif -+ -+#define LTQ_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \ -+ I2C_IMSC_I2C_ERR_INT_EN) -+ -+#define LTQ_I2C_ARB_LOST (1 << 0) -+#define LTQ_I2C_NACK (1 << 1) -+#define LTQ_I2C_RX_UFL (1 << 2) -+#define LTQ_I2C_RX_OFL (1 << 3) -+#define LTQ_I2C_TX_UFL (1 << 4) -+#define LTQ_I2C_TX_OFL (1 << 5) -+ -+struct ltq_i2c { -+ struct mutex mutex; -+ -+ -+ /* active clock settings */ -+ unsigned int input_clock; /* clock input for i2c hardware block */ -+ unsigned int i2c_clock; /* approximated bus clock in kHz */ -+ -+ struct clk *clk_gate; -+ struct clk *clk_input; -+ -+ -+ /* resources (memory and interrupts) */ -+ int irq_lb; /* last burst irq */ -+ -+ struct lantiq_reg_i2c __iomem *membase; /* base of mapped registers */ -+ -+ struct i2c_adapter adap; -+ struct device *dev; -+ -+ struct completion cmd_complete; -+ -+ -+ /* message transfer data */ -+ struct i2c_msg *current_msg; /* current message */ -+ int msgs_num; /* number of messages to handle */ -+ u8 *msg_buf; /* current buffer */ -+ u32 msg_buf_len; /* remaining length of current buffer */ -+ int msg_err; /* error status of the current transfer */ -+ -+ -+ /* master status codes */ -+ enum { -+ STATUS_IDLE, -+ STATUS_ADDR, /* address phase */ -+ STATUS_WRITE, -+ STATUS_READ, -+ STATUS_READ_END, -+ STATUS_STOP -+ } status; -+}; -+ -+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id); -+ -+static inline void enable_burst_irq(struct ltq_i2c *priv) -+{ -+ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc); -+} -+static inline void disable_burst_irq(struct ltq_i2c *priv) -+{ -+ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc); -+} -+ -+static void prepare_msg_send_addr(struct ltq_i2c *priv) -+{ -+ struct i2c_msg *msg = priv->current_msg; -+ int rd = !!(msg->flags & I2C_M_RD); /* extends to 0 or 1 */ -+ u16 addr = msg->addr; -+ -+ /* new i2c_msg */ -+ priv->msg_buf = msg->buf; -+ priv->msg_buf_len = msg->len; -+ if (rd) -+ priv->status = STATUS_READ; -+ else -+ priv->status = STATUS_WRITE; -+ -+ /* send slave address */ -+ if (msg->flags & I2C_M_TEN) { -+ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd); -+ i2c_w32(addr & 0xff, txd); -+ } else { -+ i2c_w32((addr & 0x7f) << 1 | rd, txd); -+ } -+} -+ -+static void ltq_i2c_set_tx_len(struct ltq_i2c *priv) -+{ -+ struct i2c_msg *msg = priv->current_msg; -+ int len = (msg->flags & I2C_M_TEN) ? 2 : 1; -+ -+ pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T'); -+ -+ priv->status = STATUS_ADDR; -+ -+ if (!(msg->flags & I2C_M_RD)) -+ len += msg->len; -+ else -+ /* set maximum received packet size (before rx int!) */ -+ i2c_w32(msg->len, mrps_ctrl); -+ i2c_w32(len, tps_ctrl); -+ enable_burst_irq(priv); -+} -+ -+static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap) -+{ -+ struct ltq_i2c *priv = i2c_get_adapdata(adap); -+ unsigned int input_clock = clk_get_rate(priv->clk_input); -+ u32 dec, inc = 1; -+ -+ /* clock changed? */ -+ if (priv->input_clock == input_clock) -+ return 0; -+ -+ /* -+ * this formula is only an approximation, found by the recommended -+ * values in the "I2C Architecture Specification 1.7.1" -+ */ -+ dec = input_clock / (priv->i2c_clock * 2); -+ if (dec <= 6) -+ return -ENXIO; -+ -+ i2c_w32(0, fdiv_high_cfg); -+ i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) | -+ (dec << I2C_FDIV_CFG_DEC_OFFSET), -+ fdiv_cfg); -+ -+ dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n", -+ input_clock, priv->i2c_clock, dec); -+ -+ priv->input_clock = input_clock; -+ return 0; -+} -+ -+static int ltq_i2c_hw_init(struct i2c_adapter *adap) -+{ -+ int ret = 0; -+ struct ltq_i2c *priv = i2c_get_adapdata(adap); -+ -+ /* disable bus */ -+ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); -+ -+#ifndef DEBUG -+ /* set normal operation clock divider */ -+ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc); -+#else -+ /* for debugging a higher divider value! */ -+ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc); -+#endif -+ -+ /* setup clock */ -+ ret = ltq_i2c_hw_set_clock(adap); -+ if (ret != 0) { -+ dev_warn(priv->dev, "invalid clock settings\n"); -+ return ret; -+ } -+ -+ /* configure fifo */ -+ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */ -+ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */ -+ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */ -+ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */ -+ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */ -+ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */ -+ fifo_cfg); -+ -+ /* configure address */ -+ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data in -+ the fifo */ -+ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */ -+ I2C_ADDR_CFG_MnS_EN | /* we are master device */ -+ 0, /* our slave address (not used!) */ -+ addr_cfg); -+ -+ /* enable bus */ -+ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl); -+ -+ return 0; -+} -+ -+static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv) -+{ -+ unsigned long timeout; -+ -+ timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT); -+ -+ do { -+ u32 stat = i2c_r32(bus_stat); -+ -+ if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE) -+ return 0; -+ -+ cond_resched(); -+ } while (!time_after_eq(jiffies, timeout)); -+ -+ dev_err(priv->dev, "timeout waiting for bus ready\n"); -+ return -ETIMEDOUT; -+} -+ -+static void ltq_i2c_tx(struct ltq_i2c *priv, int last) -+{ -+ if (priv->msg_buf_len && priv->msg_buf) { -+ i2c_w32(*priv->msg_buf, txd); -+ -+ if (--priv->msg_buf_len) -+ priv->msg_buf++; -+ else -+ priv->msg_buf = NULL; -+ } else { -+ last = 1; -+ } -+ -+ if (last) -+ disable_burst_irq(priv); -+} -+ -+static void ltq_i2c_rx(struct ltq_i2c *priv, int last) -+{ -+ u32 fifo_stat, timeout; -+ if (priv->msg_buf_len && priv->msg_buf) { -+ timeout = 5000000; -+ do { -+ fifo_stat = i2c_r32(ffs_stat); -+ } while (!fifo_stat && --timeout); -+ if (!timeout) { -+ last = 1; -+ pr_debug("\nrx timeout\n"); -+ goto err; -+ } -+ while (fifo_stat) { -+ *priv->msg_buf = i2c_r32(rxd); -+ if (--priv->msg_buf_len) { -+ priv->msg_buf++; -+ } else { -+ priv->msg_buf = NULL; -+ last = 1; -+ break; -+ } -+ /* -+ * do not read more than burst size, otherwise no "last -+ * burst" is generated and the transaction is blocked! -+ */ -+ fifo_stat = 0; -+ } -+ } else { -+ last = 1; -+ } -+err: -+ if (last) { -+ disable_burst_irq(priv); -+ -+ if (priv->status == STATUS_READ_END) { -+ /* -+ * do the STATUS_STOP and complete() here, as sometimes -+ * the tx_end is already seen before this is finished -+ */ -+ priv->status = STATUS_STOP; -+ complete(&priv->cmd_complete); -+ } else { -+ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); -+ priv->status = STATUS_READ_END; -+ } -+ } -+} -+ -+static void ltq_i2c_xfer_init(struct ltq_i2c *priv) -+{ -+ /* enable interrupts */ -+ i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc); -+ -+ /* trigger transfer of first msg */ -+ ltq_i2c_set_tx_len(priv); -+} -+ -+static void dump_msgs(struct i2c_msg msgs[], int num, int rx) -+{ -+#if defined(DEBUG) -+ int i, j; -+ pr_debug("Messages %d %s\n", num, rx ? "out" : "in"); -+ for (i = 0; i < num; i++) { -+ pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i, -+ (msgs[i].flags & I2C_M_RD) ? 'R' : 'T', -+ msgs[i].len, msgs[i].addr); -+ if (!(msgs[i].flags & I2C_M_RD) || rx) { -+ for (j = 0; j < msgs[i].len; j++) -+ pr_debug("%02X ", msgs[i].buf[j]); -+ } -+ pr_debug("\n"); -+ } -+#endif -+} -+ -+static void ltq_i2c_release_bus(struct ltq_i2c *priv) -+{ -+ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM) -+ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); -+} -+ -+static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], -+ int num) -+{ -+ struct ltq_i2c *priv = i2c_get_adapdata(adap); -+ int ret; -+ -+ dev_dbg(priv->dev, "xfer %u messages\n", num); -+ dump_msgs(msgs, num, 0); -+ -+ mutex_lock(&priv->mutex); -+ -+ INIT_COMPLETION(priv->cmd_complete); -+ priv->current_msg = msgs; -+ priv->msgs_num = num; -+ priv->msg_err = 0; -+ priv->status = STATUS_IDLE; -+ -+ /* wait for the bus to become ready */ -+ ret = ltq_i2c_wait_bus_not_busy(priv); -+ if (ret) -+ goto done; -+ -+ while (priv->msgs_num) { -+ /* start the transfers */ -+ ltq_i2c_xfer_init(priv); -+ -+ /* wait for transfers to complete */ -+ ret = wait_for_completion_interruptible_timeout( -+ &priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT); -+ if (ret == 0) { -+ dev_err(priv->dev, "controller timed out\n"); -+ ltq_i2c_hw_init(adap); -+ ret = -ETIMEDOUT; -+ goto done; -+ } else if (ret < 0) -+ goto done; -+ -+ if (priv->msg_err) { -+ if (priv->msg_err & LTQ_I2C_NACK) -+ ret = -ENXIO; -+ else -+ ret = -EREMOTEIO; -+ goto done; -+ } -+ if (--priv->msgs_num) -+ priv->current_msg++; -+ } -+ /* no error? */ -+ ret = num; -+ -+done: -+ ltq_i2c_release_bus(priv); -+ -+ mutex_unlock(&priv->mutex); -+ -+ if (ret >= 0) -+ dump_msgs(msgs, num, 1); -+ -+ pr_debug("XFER ret %d\n", ret); -+ return ret; -+} -+ -+static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id) -+{ -+ struct ltq_i2c *priv = dev_id; -+ struct i2c_msg *msg = priv->current_msg; -+ int last = (irq == priv->irq_lb); -+ -+ if (last) -+ pr_debug("LB "); -+ else -+ pr_debug("B "); -+ -+ if (msg->flags & I2C_M_RD) { -+ switch (priv->status) { -+ case STATUS_ADDR: -+ pr_debug("X"); -+ prepare_msg_send_addr(priv); -+ disable_burst_irq(priv); -+ break; -+ case STATUS_READ: -+ case STATUS_READ_END: -+ pr_debug("R"); -+ ltq_i2c_rx(priv, last); -+ break; -+ default: -+ disable_burst_irq(priv); -+ pr_warn("Status R %d\n", priv->status); -+ break; -+ } -+ } else { -+ switch (priv->status) { -+ case STATUS_ADDR: -+ pr_debug("x"); -+ prepare_msg_send_addr(priv); -+ break; -+ case STATUS_WRITE: -+ pr_debug("w"); -+ ltq_i2c_tx(priv, last); -+ break; -+ default: -+ disable_burst_irq(priv); -+ pr_warn("Status W %d\n", priv->status); -+ break; -+ } -+ } -+ -+ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr); -+ return IRQ_HANDLED; -+} -+ -+static void ltq_i2c_isr_prot(struct ltq_i2c *priv) -+{ -+ u32 i_pro = i2c_r32(p_irqss); -+ -+ pr_debug("i2c-p"); -+ -+ /* not acknowledge */ -+ if (i_pro & I2C_P_IRQSS_NACK) { -+ priv->msg_err |= LTQ_I2C_NACK; -+ pr_debug(" nack"); -+ } -+ -+ /* arbitration lost */ -+ if (i_pro & I2C_P_IRQSS_AL) { -+ priv->msg_err |= LTQ_I2C_ARB_LOST; -+ pr_debug(" arb-lost"); -+ } -+ /* tx -> rx switch */ -+ if (i_pro & I2C_P_IRQSS_RX) -+ pr_debug(" rx"); -+ -+ /* tx end */ -+ if (i_pro & I2C_P_IRQSS_TX_END) -+ pr_debug(" txend"); -+ pr_debug("\n"); -+ -+ if (!priv->msg_err) { -+ /* tx -> rx switch */ -+ if (i_pro & I2C_P_IRQSS_RX) { -+ priv->status = STATUS_READ; -+ enable_burst_irq(priv); -+ } -+ if (i_pro & I2C_P_IRQSS_TX_END) { -+ if (priv->status == STATUS_READ) -+ priv->status = STATUS_READ_END; -+ else { -+ disable_burst_irq(priv); -+ priv->status = STATUS_STOP; -+ } -+ } -+ } -+ -+ i2c_w32(i_pro, p_irqsc); -+} -+ -+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id) -+{ -+ u32 i_raw, i_err = 0; -+ struct ltq_i2c *priv = dev_id; -+ -+ i_raw = i2c_r32(mis); -+ pr_debug("i_raw 0x%08X\n", i_raw); -+ -+ /* error interrupt */ -+ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) { -+ i_err = i2c_r32(err_irqss); -+ pr_debug("i_err 0x%08X bus_stat 0x%04X\n", -+ i_err, i2c_r32(bus_stat)); -+ -+ /* tx fifo overflow (8) */ -+ if (i_err & I2C_ERR_IRQSS_TXF_OFL) -+ priv->msg_err |= LTQ_I2C_TX_OFL; -+ -+ /* tx fifo underflow (4) */ -+ if (i_err & I2C_ERR_IRQSS_TXF_UFL) -+ priv->msg_err |= LTQ_I2C_TX_UFL; -+ -+ /* rx fifo overflow (2) */ -+ if (i_err & I2C_ERR_IRQSS_RXF_OFL) -+ priv->msg_err |= LTQ_I2C_RX_OFL; -+ -+ /* rx fifo underflow (1) */ -+ if (i_err & I2C_ERR_IRQSS_RXF_UFL) -+ priv->msg_err |= LTQ_I2C_RX_UFL; -+ -+ i2c_w32(i_err, err_irqsc); -+ } -+ -+ /* protocol interrupt */ -+ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC) -+ ltq_i2c_isr_prot(priv); -+ -+ if ((priv->msg_err) || (priv->status == STATUS_STOP)) -+ complete(&priv->cmd_complete); -+ -+ return IRQ_HANDLED; -+} -+ -+static u32 ltq_i2c_functionality(struct i2c_adapter *adap) -+{ -+ return I2C_FUNC_I2C | -+ I2C_FUNC_10BIT_ADDR | -+ I2C_FUNC_SMBUS_EMUL; -+} -+ -+static struct i2c_algorithm ltq_i2c_algorithm = { -+ .master_xfer = ltq_i2c_xfer, -+ .functionality = ltq_i2c_functionality, -+}; -+ -+static int __devinit ltq_i2c_probe(struct platform_device *pdev) -+{ -+ struct device_node *node = pdev->dev.of_node; -+ struct ltq_i2c *priv; -+ struct i2c_adapter *adap; -+ struct resource *mmres, irqres[4]; -+ int ret = 0; -+ -+ dev_dbg(&pdev->dev, "probing\n"); -+ -+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ ret = of_irq_to_resource_table(node, irqres, 4); -+ if (!mmres || (ret != 4)) { -+ dev_err(&pdev->dev, "no resources\n"); -+ return -ENODEV; -+ } -+ -+ /* allocate private data */ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) { -+ dev_err(&pdev->dev, "can't allocate private data\n"); -+ return -ENOMEM; -+ } -+ -+ adap = &priv->adap; -+ i2c_set_adapdata(adap, priv); -+ adap->owner = THIS_MODULE; -+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; -+ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name)); -+ adap->algo = <q_i2c_algorithm; -+ -+ if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) { -+ dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n"); -+ priv->i2c_clock = 100000; -+ } -+ -+ init_completion(&priv->cmd_complete); -+ mutex_init(&priv->mutex); -+ -+ priv->membase = devm_request_and_ioremap(&pdev->dev, mmres); -+ if (priv->membase == NULL) -+ return -ENOMEM; -+ -+ priv->dev = &pdev->dev; -+ priv->irq_lb = irqres[0].start; -+ -+ ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst, -+ IRQF_DISABLED, "i2c lb", priv); -+ if (ret) { -+ dev_err(&pdev->dev, "can't get last burst IRQ %d\n", -+ irqres[0].start); -+ return -ENODEV; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst, -+ IRQF_DISABLED, "i2c b", priv); -+ if (ret) { -+ dev_err(&pdev->dev, "can't get burst IRQ %d\n", -+ irqres[1].start); -+ return -ENODEV; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr, -+ IRQF_DISABLED, "i2c err", priv); -+ if (ret) { -+ dev_err(&pdev->dev, "can't get error IRQ %d\n", -+ irqres[2].start); -+ return -ENODEV; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr, -+ IRQF_DISABLED, "i2c p", priv); -+ if (ret) { -+ dev_err(&pdev->dev, "can't get protocol IRQ %d\n", -+ irqres[3].start); -+ return -ENODEV; -+ } -+ -+ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase); -+ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start, -+ irqres[1].start, irqres[2].start, irqres[3].start); -+ -+ priv->clk_gate = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(priv->clk_gate)) { -+ dev_err(&pdev->dev, "failed to get i2c clk\n"); -+ return -ENOENT; -+ } -+ -+ /* this is a static clock, which has no refcounting */ -+ priv->clk_input = clk_get_fpi(); -+ if (IS_ERR(priv->clk_input)) { -+ dev_err(&pdev->dev, "failed to get fpi clk\n"); -+ return -ENOENT; -+ } -+ -+ clk_activate(priv->clk_gate); -+ -+ /* add our adapter to the i2c stack */ -+ ret = i2c_add_numbered_adapter(adap); -+ if (ret) { -+ dev_err(&pdev->dev, "can't register I2C adapter\n"); -+ goto out; -+ } -+ -+ platform_set_drvdata(pdev, priv); -+ i2c_set_adapdata(adap, priv); -+ -+ /* print module version information */ -+ dev_dbg(&pdev->dev, "module id=%u revision=%u\n", -+ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET, -+ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET); -+ -+ /* initialize HW */ -+ ret = ltq_i2c_hw_init(adap); -+ if (ret) { -+ dev_err(&pdev->dev, "can't configure adapter\n"); -+ i2c_del_adapter(adap); -+ platform_set_drvdata(pdev, NULL); -+ } else { -+ dev_info(&pdev->dev, "version %s\n", DRV_VERSION); -+ } -+ -+ of_i2c_register_devices(adap); -+ -+out: -+ /* if init failed, we need to deactivate the clock gate */ -+ if (ret) -+ clk_deactivate(priv->clk_gate); -+ -+ return ret; -+} -+ -+static int __devexit ltq_i2c_remove(struct platform_device *pdev) -+{ -+ struct ltq_i2c *priv = platform_get_drvdata(pdev); -+ -+ /* disable bus */ -+ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); -+ -+ /* power down the core */ -+ clk_deactivate(priv->clk_gate); -+ -+ /* remove driver */ -+ i2c_del_adapter(&priv->adap); -+ kfree(priv); -+ -+ dev_dbg(&pdev->dev, "removed\n"); -+ platform_set_drvdata(pdev, NULL); -+ -+ return 0; -+} -+static const struct of_device_id ltq_i2c_match[] = { -+ { .compatible = "lantiq,lantiq-i2c" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ltq_i2c_match); -+ -+static struct platform_driver ltq_i2c_driver = { -+ .probe = ltq_i2c_probe, -+ .remove = __devexit_p(ltq_i2c_remove), -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = ltq_i2c_match, -+ }, -+}; -+ -+module_platform_driver(ltq_i2c_driver); -+ -+MODULE_DESCRIPTION("Lantiq I2C bus adapter"); -+MODULE_AUTHOR("Thomas Langer "); -+MODULE_ALIAS("platform:" DRV_NAME); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(DRV_VERSION); ---- /dev/null -+++ b/drivers/i2c/busses/i2c-lantiq.h -@@ -0,0 +1,234 @@ -+#ifndef I2C_LANTIQ_H -+#define I2C_LANTIQ_H -+ -+/* I2C register structure */ -+struct lantiq_reg_i2c { -+ /* I2C Kernel Clock Control Register */ -+ unsigned int clc; /* 0x00000000 */ -+ /* Reserved */ -+ unsigned int res_0; /* 0x00000004 */ -+ /* I2C Identification Register */ -+ unsigned int id; /* 0x00000008 */ -+ /* Reserved */ -+ unsigned int res_1; /* 0x0000000C */ -+ /* -+ * I2C RUN Control Register -+ * This register enables and disables the I2C peripheral. Before -+ * enabling, the I2C has to be configured properly. After enabling -+ * no configuration is possible -+ */ -+ unsigned int run_ctrl; /* 0x00000010 */ -+ /* -+ * I2C End Data Control Register -+ * This register is used to either turn around the data transmission -+ * direction or to address another slave without sending a stop -+ * condition. Also the software can stop the slave-transmitter by -+ * sending a not-accolade when working as master-receiver or even -+ * stop data transmission immediately when operating as -+ * master-transmitter. The writing to the bits of this control -+ * register is only effective when in MASTER RECEIVES BYTES, MASTER -+ * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state -+ */ -+ unsigned int endd_ctrl; /* 0x00000014 */ -+ /* -+ * I2C Fractional Divider Configuration Register -+ * These register is used to program the fractional divider of the I2C -+ * bus. Before the peripheral is switched on by setting the RUN-bit the -+ * two (fixed) values for the two operating frequencies are programmed -+ * into these (configuration) registers. The Register FDIV_HIGH_CFG has -+ * the same layout as I2C_FDIV_CFG. -+ */ -+ unsigned int fdiv_cfg; /* 0x00000018 */ -+ /* -+ * I2C Fractional Divider (highspeed mode) Configuration Register -+ * These register is used to program the fractional divider of the I2C -+ * bus. Before the peripheral is switched on by setting the RUN-bit the -+ * two (fixed) values for the two operating frequencies are programmed -+ * into these (configuration) registers. The Register FDIV_CFG has the -+ * same layout as I2C_FDIV_CFG. -+ */ -+ unsigned int fdiv_high_cfg; /* 0x0000001C */ -+ /* I2C Address Configuration Register */ -+ unsigned int addr_cfg; /* 0x00000020 */ -+ /* I2C Bus Status Register -+ * This register gives a status information of the I2C. This additional -+ * information can be used by the software to start proper actions. -+ */ -+ unsigned int bus_stat; /* 0x00000024 */ -+ /* I2C FIFO Configuration Register */ -+ unsigned int fifo_cfg; /* 0x00000028 */ -+ /* I2C Maximum Received Packet Size Register */ -+ unsigned int mrps_ctrl; /* 0x0000002C */ -+ /* I2C Received Packet Size Status Register */ -+ unsigned int rps_stat; /* 0x00000030 */ -+ /* I2C Transmit Packet Size Register */ -+ unsigned int tps_ctrl; /* 0x00000034 */ -+ /* I2C Filled FIFO Stages Status Register */ -+ unsigned int ffs_stat; /* 0x00000038 */ -+ /* Reserved */ -+ unsigned int res_2; /* 0x0000003C */ -+ /* I2C Timing Configuration Register */ -+ unsigned int tim_cfg; /* 0x00000040 */ -+ /* Reserved */ -+ unsigned int res_3[7]; /* 0x00000044 */ -+ /* I2C Error Interrupt Request Source Mask Register */ -+ unsigned int err_irqsm; /* 0x00000060 */ -+ /* I2C Error Interrupt Request Source Status Register */ -+ unsigned int err_irqss; /* 0x00000064 */ -+ /* I2C Error Interrupt Request Source Clear Register */ -+ unsigned int err_irqsc; /* 0x00000068 */ -+ /* Reserved */ -+ unsigned int res_4; /* 0x0000006C */ -+ /* I2C Protocol Interrupt Request Source Mask Register */ -+ unsigned int p_irqsm; /* 0x00000070 */ -+ /* I2C Protocol Interrupt Request Source Status Register */ -+ unsigned int p_irqss; /* 0x00000074 */ -+ /* I2C Protocol Interrupt Request Source Clear Register */ -+ unsigned int p_irqsc; /* 0x00000078 */ -+ /* Reserved */ -+ unsigned int res_5; /* 0x0000007C */ -+ /* I2C Raw Interrupt Status Register */ -+ unsigned int ris; /* 0x00000080 */ -+ /* I2C Interrupt Mask Control Register */ -+ unsigned int imsc; /* 0x00000084 */ -+ /* I2C Masked Interrupt Status Register */ -+ unsigned int mis; /* 0x00000088 */ -+ /* I2C Interrupt Clear Register */ -+ unsigned int icr; /* 0x0000008C */ -+ /* I2C Interrupt Set Register */ -+ unsigned int isr; /* 0x00000090 */ -+ /* I2C DMA Enable Register */ -+ unsigned int dmae; /* 0x00000094 */ -+ /* Reserved */ -+ unsigned int res_6[8154]; /* 0x00000098 */ -+ /* I2C Transmit Data Register */ -+ unsigned int txd; /* 0x00008000 */ -+ /* Reserved */ -+ unsigned int res_7[4095]; /* 0x00008004 */ -+ /* I2C Receive Data Register */ -+ unsigned int rxd; /* 0x0000C000 */ -+ /* Reserved */ -+ unsigned int res_8[4095]; /* 0x0000C004 */ -+}; -+ -+/* -+ * Clock Divider for Normal Run Mode -+ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long -+ * as the new divider value RMC is not valid, the register returns 0x0000 00xx -+ * on reading. -+ */ -+#define I2C_CLC_RMC_MASK 0x0000FF00 -+/* field offset */ -+#define I2C_CLC_RMC_OFFSET 8 -+ -+/* Fields of "I2C Identification Register" */ -+/* Module ID */ -+#define I2C_ID_ID_MASK 0x0000FF00 -+/* field offset */ -+#define I2C_ID_ID_OFFSET 8 -+/* Revision */ -+#define I2C_ID_REV_MASK 0x000000FF -+/* field offset */ -+#define I2C_ID_REV_OFFSET 0 -+ -+/* Fields of "I2C Interrupt Mask Control Register" */ -+/* Enable */ -+#define I2C_IMSC_BREQ_INT_EN 0x00000008 -+/* Enable */ -+#define I2C_IMSC_LBREQ_INT_EN 0x00000004 -+ -+/* Fields of "I2C Fractional Divider Configuration Register" */ -+/* field offset */ -+#define I2C_FDIV_CFG_INC_OFFSET 16 -+ -+/* Fields of "I2C Interrupt Mask Control Register" */ -+/* Enable */ -+#define I2C_IMSC_I2C_P_INT_EN 0x00000020 -+/* Enable */ -+#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010 -+ -+/* Fields of "I2C Error Interrupt Request Source Status Register" */ -+/* TXF_OFL */ -+#define I2C_ERR_IRQSS_TXF_OFL 0x00000008 -+/* TXF_UFL */ -+#define I2C_ERR_IRQSS_TXF_UFL 0x00000004 -+/* RXF_OFL */ -+#define I2C_ERR_IRQSS_RXF_OFL 0x00000002 -+/* RXF_UFL */ -+#define I2C_ERR_IRQSS_RXF_UFL 0x00000001 -+ -+/* Fields of "I2C Raw Interrupt Status Register" */ -+/* Read: Interrupt occurred. */ -+#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010 -+/* Read: Interrupt occurred. */ -+#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020 -+ -+/* Fields of "I2C FIFO Configuration Register" */ -+/* TX FIFO Flow Control */ -+#define I2C_FIFO_CFG_TXFC 0x00020000 -+/* RX FIFO Flow Control */ -+#define I2C_FIFO_CFG_RXFC 0x00010000 -+/* Word aligned (character alignment of four characters) */ -+#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000 -+/* Word aligned (character alignment of four characters) */ -+#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200 -+/* 1 word */ -+#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000 -+ -+/* Fields of "I2C FIFO Configuration Register" */ -+/* 1 word */ -+#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000 -+/* Stop on Packet End Enable */ -+#define I2C_ADDR_CFG_SOPE_EN 0x00200000 -+/* Stop on Not Acknowledge Enable */ -+#define I2C_ADDR_CFG_SONA_EN 0x00100000 -+/* Enable */ -+#define I2C_ADDR_CFG_MnS_EN 0x00080000 -+ -+/* Fields of "I2C Interrupt Clear Register" */ -+/* Clear */ -+#define I2C_ICR_BREQ_INT_CLR 0x00000008 -+/* Clear */ -+#define I2C_ICR_LBREQ_INT_CLR 0x00000004 -+ -+/* Fields of "I2C Fractional Divider Configuration Register" */ -+/* field offset */ -+#define I2C_FDIV_CFG_DEC_OFFSET 0 -+ -+/* Fields of "I2C Bus Status Register" */ -+/* Bus Status */ -+#define I2C_BUS_STAT_BS_MASK 0x00000003 -+/* Read from I2C Bus. */ -+#define I2C_BUS_STAT_RNW_READ 0x00000004 -+/* I2C Bus is free. */ -+#define I2C_BUS_STAT_BS_FREE 0x00000000 -+/* -+ * The device is working as master and has claimed the control on the -+ * I2C-bus (busy master). -+ */ -+#define I2C_BUS_STAT_BS_BM 0x00000002 -+ -+/* Fields of "I2C RUN Control Register" */ -+/* Enable */ -+#define I2C_RUN_CTRL_RUN_EN 0x00000001 -+ -+/* Fields of "I2C End Data Control Register" */ -+/* -+ * Set End of Transmission -+ * Note:Do not write '1' to this bit when bus is free. This will cause an -+ * abort after the first byte when a new transfer is started. -+ */ -+#define I2C_ENDD_CTRL_SETEND 0x00000002 -+ -+/* Fields of "I2C Protocol Interrupt Request Source Status Register" */ -+/* NACK */ -+#define I2C_P_IRQSS_NACK 0x00000010 -+/* AL */ -+#define I2C_P_IRQSS_AL 0x00000008 -+/* RX */ -+#define I2C_P_IRQSS_RX 0x00000040 -+/* TX_END */ -+#define I2C_P_IRQSS_TX_END 0x00000020 -+ -+ -+#endif /* I2C_LANTIQ_H */ diff --git a/target/linux/lantiq/patches-3.7/0114-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-3.7/0114-SPI-MIPS-lantiq-adds-spi-xway.patch deleted file mode 100644 index 42b3a575b6..0000000000 --- a/target/linux/lantiq/patches-3.7/0114-SPI-MIPS-lantiq-adds-spi-xway.patch +++ /dev/null @@ -1,1023 +0,0 @@ -From db447f1a18106aa4d32438ab72ff57024b34cee4 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 16 Aug 2012 09:57:01 +0200 -Subject: [PATCH 114/123] SPI: MIPS: lantiq: adds spi-xway - -This patch adds support for the SPI core found on several Lantiq SoCs. -The Driver has been runtime tested in combination with m25p80 Flash Devices -on Amazon_SE and VR9. - -Signed-off-by: Daniel Schwierzeck -Signed-off-by: John Crispin ---- - drivers/spi/Kconfig | 8 + - drivers/spi/Makefile | 1 + - drivers/spi/spi-xway.c | 977 ++++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 986 insertions(+) - create mode 100644 drivers/spi/spi-xway.c - ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -443,6 +443,14 @@ config SPI_NUC900 - help - SPI driver for Nuvoton NUC900 series ARM SoCs - -+config SPI_XWAY -+ tristate "Lantiq XWAY SPI controller" -+ depends on LANTIQ && SOC_TYPE_XWAY -+ select SPI_BITBANG -+ help -+ This driver supports the Lantiq SoC SPI controller in master -+ mode. -+ - # - # Add new SPI master controllers in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -67,4 +67,5 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-t - obj-$(CONFIG_SPI_TXX9) += spi-txx9.o - obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o - obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o -+obj-$(CONFIG_SPI_XWAY) += spi-xway.o - ---- /dev/null -+++ b/drivers/spi/spi-xway.c -@@ -0,0 +1,977 @@ -+/* -+ * Lantiq SoC SPI controller -+ * -+ * Copyright (C) 2011 Daniel Schwierzeck -+ * Copyright (C) 2012 John Crispin -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define LTQ_SPI_CLC 0x00 /* Clock control */ -+#define LTQ_SPI_PISEL 0x04 /* Port input select */ -+#define LTQ_SPI_ID 0x08 /* Identification */ -+#define LTQ_SPI_CON 0x10 /* Control */ -+#define LTQ_SPI_STAT 0x14 /* Status */ -+#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */ -+#define LTQ_SPI_TB 0x20 /* Transmit buffer */ -+#define LTQ_SPI_RB 0x24 /* Receive buffer */ -+#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */ -+#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */ -+#define LTQ_SPI_FSTAT 0x38 /* FIFO status */ -+#define LTQ_SPI_BRT 0x40 /* Baudrate timer */ -+#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */ -+#define LTQ_SPI_SFCON 0x60 /* Serial frame control */ -+#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */ -+#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */ -+#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */ -+#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */ -+#define LTQ_SPI_RXREQ 0x80 /* Receive request */ -+#define LTQ_SPI_RXCNT 0x84 /* Receive count */ -+#define LTQ_SPI_DMACON 0xEC /* DMA control */ -+#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */ -+#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */ -+#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */ -+ -+#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */ -+#define LTQ_SPI_CLC_SMC_MASK 0xFF -+#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */ -+#define LTQ_SPI_CLC_RMC_MASK 0xFF -+#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */ -+#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ -+ -+#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */ -+#define LTQ_SPI_ID_TXFS_MASK 0x3F -+#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */ -+#define LTQ_SPI_ID_RXFS_MASK 0x3F -+#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */ -+#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */ -+ -+#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */ -+#define LTQ_SPI_CON_BM_MASK 0x1F -+#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */ -+#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */ -+#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */ -+#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ -+#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ -+#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */ -+#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */ -+#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ -+#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */ -+#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */ -+#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */ -+#define LTQ_SPI_CON_HB BIT(4) /* Heading control */ -+#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */ -+#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ -+ -+#define LTQ_SPI_STAT_RXBV_MASK 0x7 -+#define LTQ_SPI_STAT_RXBV_SHIFT 28 -+#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */ -+#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ -+#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ -+#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */ -+#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */ -+#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */ -+#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */ -+#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */ -+ -+#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ -+#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ -+#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ -+#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ -+#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error -+ flag */ -+#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ -+#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ -+#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ -+#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ -+#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ -+#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ -+#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ -+#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ -+#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ -+#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ -+#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ -+#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50 -+ -+#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */ -+#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F -+#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ -+#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ -+ -+#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */ -+#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F -+#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ -+#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ -+ -+#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f -+#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0 -+#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f -+#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8 -+ -+#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8 -+#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0 -+ -+#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8 -+#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0 -+ -+#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */ -+#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */ -+ -+#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ -+#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ -+#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */ -+#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */ -+#define LTQ_SPI_IRNEN_ALL 0xF -+ -+struct ltq_spi { -+ struct spi_bitbang bitbang; -+ struct completion done; -+ spinlock_t lock; -+ -+ struct device *dev; -+ void __iomem *base; -+ struct clk *fpiclk; -+ struct clk *spiclk; -+ -+ int status; -+ int irq[3]; -+ -+ const u8 *tx; -+ u8 *rx; -+ u32 tx_cnt; -+ u32 rx_cnt; -+ u32 len; -+ struct spi_transfer *curr_transfer; -+ -+ u32 (*get_tx) (struct ltq_spi *); -+ -+ u16 txfs; -+ u16 rxfs; -+ unsigned dma_support:1; -+ unsigned cfg_mode:1; -+}; -+ -+static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi) -+{ -+ return spi_master_get_devdata(spi->master); -+} -+ -+static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg) -+{ -+ return ioread32be(hw->base + reg); -+} -+ -+static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg) -+{ -+ iowrite32be(val, hw->base + reg); -+} -+ -+static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg) -+{ -+ u32 val; -+ -+ val = ltq_spi_reg_read(hw, reg); -+ val |= bits; -+ ltq_spi_reg_write(hw, val, reg); -+} -+ -+static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg) -+{ -+ u32 val; -+ -+ val = ltq_spi_reg_read(hw, reg); -+ val &= ~bits; -+ ltq_spi_reg_write(hw, val, reg); -+} -+ -+static void ltq_spi_hw_enable(struct ltq_spi *hw) -+{ -+ u32 clc; -+ -+ /* Power-up module */ -+ clk_enable(hw->spiclk); -+ -+ /* -+ * Set clock divider for run mode to 1 to -+ * run at same frequency as FPI bus -+ */ -+ clc = (1 << LTQ_SPI_CLC_RMC_SHIFT); -+ ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC); -+} -+ -+static void ltq_spi_hw_disable(struct ltq_spi *hw) -+{ -+ /* Set clock divider to 0 and set module disable bit */ -+ ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC); -+ -+ /* Power-down module */ -+ clk_disable(hw->spiclk); -+} -+ -+static void ltq_spi_reset_fifos(struct ltq_spi *hw) -+{ -+ u32 val; -+ -+ /* -+ * Enable and flush FIFOs. Set interrupt trigger level to -+ * half of FIFO count implemented in hardware. -+ */ -+ if (hw->txfs > 1) { -+ val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1); -+ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU; -+ ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON); -+ } -+ -+ if (hw->rxfs > 1) { -+ val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1); -+ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU; -+ ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON); -+ } -+} -+ -+static inline int ltq_spi_wait_ready(struct ltq_spi *hw) -+{ -+ u32 stat; -+ unsigned long timeout; -+ -+ timeout = jiffies + msecs_to_jiffies(200); -+ -+ do { -+ stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT); -+ if (!(stat & LTQ_SPI_STAT_BSY)) -+ return 0; -+ -+ cond_resched(); -+ } while (!time_after_eq(jiffies, timeout)); -+ -+ dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat); -+ -+ return -ETIMEDOUT; -+} -+ -+static void ltq_spi_config_mode_set(struct ltq_spi *hw) -+{ -+ if (hw->cfg_mode) -+ return; -+ -+ /* -+ * Putting the SPI module in config mode is only safe if no -+ * transfer is in progress as indicated by busy flag STATE.BSY. -+ */ -+ if (ltq_spi_wait_ready(hw)) { -+ ltq_spi_reset_fifos(hw); -+ hw->status = -ETIMEDOUT; -+ } -+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE); -+ -+ hw->cfg_mode = 1; -+} -+ -+static void ltq_spi_run_mode_set(struct ltq_spi *hw) -+{ -+ if (!hw->cfg_mode) -+ return; -+ -+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE); -+ -+ hw->cfg_mode = 0; -+} -+ -+static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw) -+{ -+ const u8 *tx = hw->tx; -+ u32 data = *tx++; -+ -+ hw->tx_cnt++; -+ hw->tx++; -+ -+ return data; -+} -+ -+static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw) -+{ -+ const u16 *tx = (u16 *) hw->tx; -+ u32 data = *tx++; -+ -+ hw->tx_cnt += 2; -+ hw->tx += 2; -+ -+ return data; -+} -+ -+static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw) -+{ -+ const u32 *tx = (u32 *) hw->tx; -+ u32 data = *tx++; -+ -+ hw->tx_cnt += 4; -+ hw->tx += 4; -+ -+ return data; -+} -+ -+static void ltq_spi_bits_per_word_set(struct spi_device *spi) -+{ -+ struct ltq_spi *hw = ltq_spi_to_hw(spi); -+ u32 bm; -+ u8 bits_per_word = spi->bits_per_word; -+ -+ /* -+ * Use either default value of SPI device or value -+ * from current transfer. -+ */ -+ if (hw->curr_transfer && hw->curr_transfer->bits_per_word) -+ bits_per_word = hw->curr_transfer->bits_per_word; -+ -+ if (bits_per_word <= 8) -+ hw->get_tx = ltq_spi_tx_word_u8; -+ else if (bits_per_word <= 16) -+ hw->get_tx = ltq_spi_tx_word_u16; -+ else if (bits_per_word <= 32) -+ hw->get_tx = ltq_spi_tx_word_u32; -+ -+ /* CON.BM value = bits_per_word - 1 */ -+ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT; -+ -+ ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK << -+ LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON); -+ ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON); -+} -+ -+static void ltq_spi_speed_set(struct spi_device *spi) -+{ -+ struct ltq_spi *hw = ltq_spi_to_hw(spi); -+ u32 br, max_speed_hz, spi_clk; -+ u32 speed_hz = spi->max_speed_hz; -+ -+ /* -+ * Use either default value of SPI device or value -+ * from current transfer. -+ */ -+ if (hw->curr_transfer && hw->curr_transfer->speed_hz) -+ speed_hz = hw->curr_transfer->speed_hz; -+ -+ /* -+ * SPI module clock is derived from FPI bus clock dependent on -+ * divider value in CLC.RMS which is always set to 1. -+ */ -+ spi_clk = clk_get_rate(hw->fpiclk); -+ -+ /* -+ * Maximum SPI clock frequency in master mode is half of -+ * SPI module clock frequency. Maximum reload value of -+ * baudrate generator BR is 2^16. -+ */ -+ max_speed_hz = spi_clk / 2; -+ if (speed_hz >= max_speed_hz) -+ br = 0; -+ else -+ br = (max_speed_hz / speed_hz) - 1; -+ -+ if (br > 0xFFFF) -+ br = 0xFFFF; -+ -+ ltq_spi_reg_write(hw, br, LTQ_SPI_BRT); -+} -+ -+static void ltq_spi_clockmode_set(struct spi_device *spi) -+{ -+ struct ltq_spi *hw = ltq_spi_to_hw(spi); -+ u32 con; -+ -+ con = ltq_spi_reg_read(hw, LTQ_SPI_CON); -+ -+ /* -+ * SPI mode mapping in CON register: -+ * Mode CPOL CPHA CON.PO CON.PH -+ * 0 0 0 0 1 -+ * 1 0 1 0 0 -+ * 2 1 0 1 1 -+ * 3 1 1 1 0 -+ */ -+ if (spi->mode & SPI_CPHA) -+ con &= ~LTQ_SPI_CON_PH; -+ else -+ con |= LTQ_SPI_CON_PH; -+ -+ if (spi->mode & SPI_CPOL) -+ con |= LTQ_SPI_CON_PO; -+ else -+ con &= ~LTQ_SPI_CON_PO; -+ -+ /* Set heading control */ -+ if (spi->mode & SPI_LSB_FIRST) -+ con &= ~LTQ_SPI_CON_HB; -+ else -+ con |= LTQ_SPI_CON_HB; -+ -+ ltq_spi_reg_write(hw, con, LTQ_SPI_CON); -+} -+ -+static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t) -+{ -+ u32 con; -+ -+ con = ltq_spi_reg_read(hw, LTQ_SPI_CON); -+ -+ if (t) { -+ if (t->tx_buf && t->rx_buf) { -+ con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF); -+ } else if (t->rx_buf) { -+ con &= ~LTQ_SPI_CON_RXOFF; -+ con |= LTQ_SPI_CON_TXOFF; -+ } else if (t->tx_buf) { -+ con &= ~LTQ_SPI_CON_TXOFF; -+ con |= LTQ_SPI_CON_RXOFF; -+ } -+ } else -+ con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF); -+ -+ ltq_spi_reg_write(hw, con, LTQ_SPI_CON); -+} -+ -+static void ltq_spi_internal_cs_activate(struct spi_device *spi) -+{ -+ struct ltq_spi *hw = ltq_spi_to_hw(spi); -+ u32 fgpo; -+ -+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT)); -+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); -+} -+ -+static void ltq_spi_internal_cs_deactivate(struct spi_device *spi) -+{ -+ struct ltq_spi *hw = ltq_spi_to_hw(spi); -+ u32 fgpo; -+ -+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT)); -+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); -+} -+ -+static void ltq_spi_chipselect(struct spi_device *spi, int cs) -+{ -+ struct ltq_spi *hw = ltq_spi_to_hw(spi); -+ -+ switch (cs) { -+ case BITBANG_CS_ACTIVE: -+ ltq_spi_bits_per_word_set(spi); -+ ltq_spi_speed_set(spi); -+ ltq_spi_clockmode_set(spi); -+ ltq_spi_run_mode_set(hw); -+ ltq_spi_internal_cs_activate(spi); -+ break; -+ -+ case BITBANG_CS_INACTIVE: -+ ltq_spi_internal_cs_deactivate(spi); -+ ltq_spi_config_mode_set(hw); -+ break; -+ } -+} -+ -+static int ltq_spi_setup_transfer(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ struct ltq_spi *hw = ltq_spi_to_hw(spi); -+ u8 bits_per_word = spi->bits_per_word; -+ -+ hw->curr_transfer = t; -+ -+ if (t && t->bits_per_word) -+ bits_per_word = t->bits_per_word; -+ -+ if (bits_per_word > 32) -+ return -EINVAL; -+ -+ ltq_spi_config_mode_set(hw); -+ -+ return 0; -+} -+ -+static int ltq_spi_setup(struct spi_device *spi) -+{ -+ struct ltq_spi *hw = ltq_spi_to_hw(spi); -+ u32 gpocon, fgpo; -+ -+ /* Set default word length to 8 if not set */ -+ if (!spi->bits_per_word) -+ spi->bits_per_word = 8; -+ -+ if (spi->bits_per_word > 32) -+ return -EINVAL; -+ -+ /* -+ * Up to six GPIOs can be connected to the SPI module -+ * via GPIO alternate function to control the chip select lines. -+ */ -+ gpocon = (1 << (spi->chip_select + -+ LTQ_SPI_GPOCON_ISCSBN_SHIFT)); -+ -+ if (spi->mode & SPI_CS_HIGH) -+ gpocon |= (1 << spi->chip_select); -+ -+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT)); -+ -+ ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON); -+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); -+ -+ return 0; -+} -+ -+static void ltq_spi_cleanup(struct spi_device *spi) -+{ -+ -+} -+ -+static void ltq_spi_txfifo_write(struct ltq_spi *hw) -+{ -+ u32 fstat, data; -+ u16 fifo_space; -+ -+ /* Determine how much FIFOs are free for TX data */ -+ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT); -+ fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) & -+ LTQ_SPI_FSTAT_TXFFL_MASK); -+ -+ if (!fifo_space) -+ return; -+ -+ while (hw->tx_cnt < hw->len && fifo_space) { -+ data = hw->get_tx(hw); -+ ltq_spi_reg_write(hw, data, LTQ_SPI_TB); -+ fifo_space--; -+ } -+} -+ -+static void ltq_spi_rxfifo_read(struct ltq_spi *hw) -+{ -+ u32 fstat, data, *rx32; -+ u16 fifo_fill; -+ u8 rxbv, shift, *rx8; -+ -+ /* Determine how much FIFOs are filled with RX data */ -+ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT); -+ fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT) -+ & LTQ_SPI_FSTAT_RXFFL_MASK); -+ -+ if (!fifo_fill) -+ return; -+ -+ /* -+ * The 32 bit FIFO is always used completely independent from the -+ * bits_per_word value. Thus four bytes have to be read at once -+ * per FIFO. -+ */ -+ rx32 = (u32 *) hw->rx; -+ while (hw->len - hw->rx_cnt >= 4 && fifo_fill) { -+ *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB); -+ hw->rx_cnt += 4; -+ hw->rx += 4; -+ fifo_fill--; -+ } -+ -+ /* -+ * If there are remaining bytes, read byte count from STAT.RXBV -+ * register and read the data byte-wise. -+ */ -+ while (fifo_fill && hw->rx_cnt < hw->len) { -+ rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >> -+ LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK; -+ data = ltq_spi_reg_read(hw, LTQ_SPI_RB); -+ -+ shift = (rxbv - 1) * 8; -+ rx8 = hw->rx; -+ -+ while (rxbv) { -+ *rx8++ = (data >> shift) & 0xFF; -+ rxbv--; -+ shift -= 8; -+ hw->rx_cnt++; -+ hw->rx++; -+ } -+ -+ fifo_fill--; -+ } -+} -+ -+static void ltq_spi_rxreq_set(struct ltq_spi *hw) -+{ -+ u32 rxreq, rxreq_max, rxtodo; -+ -+ rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK; -+ -+ /* -+ * In RX-only mode the serial clock is activated only after writing -+ * the expected amount of RX bytes into RXREQ register. -+ * To avoid receive overflows at high clocks it is better to request -+ * only the amount of bytes that fits into all FIFOs. This value -+ * depends on the FIFO size implemented in hardware. -+ */ -+ rxreq = hw->len - hw->rx_cnt; -+ rxreq_max = hw->rxfs << 2; -+ rxreq = min(rxreq_max, rxreq); -+ -+ if (!rxtodo && rxreq) -+ ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ); -+} -+ -+static inline void ltq_spi_complete(struct ltq_spi *hw) -+{ -+ complete(&hw->done); -+} -+ -+irqreturn_t ltq_spi_tx_irq(int irq, void *data) -+{ -+ struct ltq_spi *hw = data; -+ unsigned long flags; -+ int completed = 0; -+ -+ spin_lock_irqsave(&hw->lock, flags); -+ -+ if (hw->tx_cnt < hw->len) -+ ltq_spi_txfifo_write(hw); -+ -+ if (hw->tx_cnt == hw->len) -+ completed = 1; -+ -+ spin_unlock_irqrestore(&hw->lock, flags); -+ -+ if (completed) -+ ltq_spi_complete(hw); -+ -+ return IRQ_HANDLED; -+} -+ -+irqreturn_t ltq_spi_rx_irq(int irq, void *data) -+{ -+ struct ltq_spi *hw = data; -+ unsigned long flags; -+ int completed = 0; -+ -+ spin_lock_irqsave(&hw->lock, flags); -+ -+ if (hw->rx_cnt < hw->len) { -+ ltq_spi_rxfifo_read(hw); -+ -+ if (hw->tx && hw->tx_cnt < hw->len) -+ ltq_spi_txfifo_write(hw); -+ } -+ -+ if (hw->rx_cnt == hw->len) -+ completed = 1; -+ else if (!hw->tx) -+ ltq_spi_rxreq_set(hw); -+ -+ spin_unlock_irqrestore(&hw->lock, flags); -+ -+ if (completed) -+ ltq_spi_complete(hw); -+ -+ return IRQ_HANDLED; -+} -+ -+irqreturn_t ltq_spi_err_irq(int irq, void *data) -+{ -+ struct ltq_spi *hw = data; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&hw->lock, flags); -+ -+ /* Disable all interrupts */ -+ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN); -+ -+ /* Clear all error flags */ -+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); -+ -+ /* Flush FIFOs */ -+ ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON); -+ ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON); -+ -+ hw->status = -EIO; -+ spin_unlock_irqrestore(&hw->lock, flags); -+ -+ ltq_spi_complete(hw); -+ -+ return IRQ_HANDLED; -+} -+ -+static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -+{ -+ struct ltq_spi *hw = ltq_spi_to_hw(spi); -+ u32 irq_flags = 0; -+ -+ hw->tx = t->tx_buf; -+ hw->rx = t->rx_buf; -+ hw->len = t->len; -+ hw->tx_cnt = 0; -+ hw->rx_cnt = 0; -+ hw->status = 0; -+ INIT_COMPLETION(hw->done); -+ -+ ltq_spi_xmit_set(hw, t); -+ -+ /* Enable error interrupts */ -+ ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN); -+ -+ if (hw->tx) { -+ /* Initially fill TX FIFO with as much data as possible */ -+ ltq_spi_txfifo_write(hw); -+ irq_flags |= LTQ_SPI_IRNEN_T; -+ -+ /* Always enable RX interrupt in Full Duplex mode */ -+ if (hw->rx) -+ irq_flags |= LTQ_SPI_IRNEN_R; -+ } else if (hw->rx) { -+ /* Start RX clock */ -+ ltq_spi_rxreq_set(hw); -+ -+ /* Enable RX interrupt to receive data from RX FIFOs */ -+ irq_flags |= LTQ_SPI_IRNEN_R; -+ } -+ -+ /* Enable TX or RX interrupts */ -+ ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN); -+ wait_for_completion_interruptible(&hw->done); -+ -+ /* Disable all interrupts */ -+ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN); -+ -+ /* -+ * Return length of current transfer for bitbang utility code if -+ * no errors occured during transmission. -+ */ -+ if (!hw->status) -+ hw->status = hw->len; -+ -+ return hw->status; -+} -+ -+static const struct ltq_spi_irq_map { -+ char *name; -+ irq_handler_t handler; -+} ltq_spi_irqs[] = { -+ { "spi_rx", ltq_spi_rx_irq }, -+ { "spi_tx", ltq_spi_tx_irq }, -+ { "spi_err", ltq_spi_err_irq }, -+}; -+ -+static int __devinit ltq_spi_probe(struct platform_device *pdev) -+{ -+ struct resource irqres[3]; -+ struct spi_master *master; -+ struct resource *r; -+ struct ltq_spi *hw; -+ int ret, i; -+ u32 data, id; -+ -+ if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 3) != 3) { -+ dev_err(&pdev->dev, "IRQ settings missing in device tree\n"); -+ return -EINVAL; -+ } -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi)); -+ if (!master) { -+ dev_err(&pdev->dev, "spi_alloc_master\n"); -+ ret = -ENOMEM; -+ goto err; -+ } -+ -+ hw = spi_master_get_devdata(master); -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (r == NULL) { -+ dev_err(&pdev->dev, "platform_get_resource\n"); -+ ret = -ENOENT; -+ goto err_master; -+ } -+ -+ r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r), -+ pdev->name); -+ if (!r) { -+ dev_err(&pdev->dev, "failed to request memory region\n"); -+ ret = -ENXIO; -+ goto err_master; -+ } -+ -+ hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r)); -+ if (!hw->base) { -+ dev_err(&pdev->dev, "failed to remap memory region\n"); -+ ret = -ENXIO; -+ goto err_master; -+ } -+ -+ memset(hw->irq, 0, sizeof(hw->irq)); -+ for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) { -+ hw->irq[i] = irqres[i].start; -+ ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler, -+ 0, ltq_spi_irqs[i].name, hw); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to request %s irq (%d)\n", -+ ltq_spi_irqs[i].name, hw->irq[i]); -+ goto err_irq; -+ } -+ } -+ -+ hw->fpiclk = clk_get_fpi(); -+ if (IS_ERR(hw->fpiclk)) { -+ dev_err(&pdev->dev, "failed to get fpi clock\n"); -+ ret = PTR_ERR(hw->fpiclk); -+ goto err_clk; -+ } -+ -+ hw->spiclk = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(hw->spiclk)) { -+ dev_err(&pdev->dev, "failed to get spi clock gate\n"); -+ ret = PTR_ERR(hw->spiclk); -+ goto err_clk; -+ } -+ -+ hw->bitbang.master = spi_master_get(master); -+ hw->bitbang.chipselect = ltq_spi_chipselect; -+ hw->bitbang.setup_transfer = ltq_spi_setup_transfer; -+ hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs; -+ -+ if (of_machine_is_compatible("lantiq,ase")) -+ master->num_chipselect = 3; -+ else -+ master->num_chipselect = 6; -+ master->bus_num = pdev->id; -+ master->setup = ltq_spi_setup; -+ master->cleanup = ltq_spi_cleanup; -+ master->dev.of_node = pdev->dev.of_node; -+ -+ hw->dev = &pdev->dev; -+ init_completion(&hw->done); -+ spin_lock_init(&hw->lock); -+ -+ ltq_spi_hw_enable(hw); -+ -+ /* Read module capabilities */ -+ id = ltq_spi_reg_read(hw, LTQ_SPI_ID); -+ hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK; -+ hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK; -+ hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0; -+ -+ ltq_spi_config_mode_set(hw); -+ -+ /* Enable error checking, disable TX/RX, set idle value high */ -+ data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN | -+ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | -+ LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE; -+ ltq_spi_reg_write(hw, data, LTQ_SPI_CON); -+ -+ /* Enable master mode and clear error flags */ -+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS | -+ LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); -+ -+ /* Reset GPIO/CS registers */ -+ ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON); -+ ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO); -+ -+ /* Enable and flush FIFOs */ -+ ltq_spi_reset_fifos(hw); -+ -+ ret = spi_bitbang_start(&hw->bitbang); -+ if (ret) { -+ dev_err(&pdev->dev, "spi_bitbang_start failed\n"); -+ goto err_bitbang; -+ } -+ -+ platform_set_drvdata(pdev, hw); -+ -+ pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n", -+ id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support); -+ -+ return 0; -+ -+err_bitbang: -+ ltq_spi_hw_disable(hw); -+ -+err_clk: -+ if (hw->fpiclk) -+ clk_put(hw->fpiclk); -+ if (hw->spiclk) -+ clk_put(hw->spiclk); -+ -+err_irq: -+ clk_put(hw->fpiclk); -+ -+ for (; i > 0; i--) -+ free_irq(hw->irq[i], hw); -+ -+err_master: -+ spi_master_put(master); -+ -+err: -+ return ret; -+} -+ -+static int __devexit ltq_spi_remove(struct platform_device *pdev) -+{ -+ struct ltq_spi *hw = platform_get_drvdata(pdev); -+ int ret, i; -+ -+ ret = spi_bitbang_stop(&hw->bitbang); -+ if (ret) -+ return ret; -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ ltq_spi_config_mode_set(hw); -+ ltq_spi_hw_disable(hw); -+ -+ for (i = 0; i < ARRAY_SIZE(hw->irq); i++) -+ if (0 < hw->irq[i]) -+ free_irq(hw->irq[i], hw); -+ -+ if (hw->fpiclk) -+ clk_put(hw->fpiclk); -+ if (hw->spiclk) -+ clk_put(hw->spiclk); -+ -+ spi_master_put(hw->bitbang.master); -+ -+ return 0; -+} -+ -+static const struct of_device_id ltq_spi_match[] = { -+ { .compatible = "lantiq,spi-xway" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ltq_spi_match); -+ -+static struct platform_driver ltq_spi_driver = { -+ .probe = ltq_spi_probe, -+ .remove = __devexit_p(ltq_spi_remove), -+ .driver = { -+ .name = "spi-xway", -+ .owner = THIS_MODULE, -+ .of_match_table = ltq_spi_match, -+ }, -+}; -+ -+module_platform_driver(ltq_spi_driver); -+ -+MODULE_DESCRIPTION("Lantiq SoC SPI controller driver"); -+MODULE_AUTHOR("Daniel Schwierzeck "); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:spi-xway"); diff --git a/target/linux/lantiq/patches-3.7/0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-3.7/0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch deleted file mode 100644 index 15b2ebf64e..0000000000 --- a/target/linux/lantiq/patches-3.7/0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch +++ /dev/null @@ -1,260 +0,0 @@ -From 12f4b99d63edc15849357c09e22a36445c2752cc Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 22 Oct 2012 09:28:30 +0200 -Subject: [PATCH 115/123] NET: PHY: adds driver for lantiq PHY11G - -Signed-off-by: John Crispin ---- - drivers/net/phy/Kconfig | 5 ++ - drivers/net/phy/Makefile | 1 + - drivers/net/phy/lantiq.c | 178 ++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 184 insertions(+) - create mode 100644 drivers/net/phy/lantiq.c - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -150,6 +150,11 @@ config MICREL_PHY - ---help--- - Currently has a driver for the KSZ8041 - -+config LANTIQ_PHY -+ tristate "Driver for Lantiq PHYs" -+ ---help--- -+ Supports the 11G and 22E PHYs. -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -39,6 +39,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o - obj-$(CONFIG_DP83640_PHY) += dp83640.o - obj-$(CONFIG_STE10XP) += ste10Xp.o - obj-$(CONFIG_MICREL_PHY) += micrel.o -+obj-$(CONFIG_LANTIQ_PHY) += lantiq.o - obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o - obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o - obj-$(CONFIG_AT803X_PHY) += at803x.o ---- /dev/null -+++ b/drivers/net/phy/lantiq.c -@@ -0,0 +1,220 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2012 Daniel Schwierzeck -+ */ -+ -+#include -+#include -+ -+#define MII_MMDCTRL 0x0d -+#define MII_MMDDATA 0x0e -+ -+#define MII_VR9_11G_IMASK 0x19 /* interrupt mask */ -+#define MII_VR9_11G_ISTAT 0x1a /* interrupt status */ -+ -+#define INT_VR9_11G_WOL BIT(15) /* Wake-On-LAN */ -+#define INT_VR9_11G_ANE BIT(11) /* Auto-Neg error */ -+#define INT_VR9_11G_ANC BIT(10) /* Auto-Neg complete */ -+#define INT_VR9_11G_ADSC BIT(5) /* Link auto-downspeed detect */ -+#define INT_VR9_11G_DXMC BIT(2) /* Duplex mode change */ -+#define INT_VR9_11G_LSPC BIT(1) /* Link speed change */ -+#define INT_VR9_11G_LSTC BIT(0) /* Link state change */ -+#define INT_VR9_11G_MASK (INT_VR9_11G_LSTC | INT_VR9_11G_ADSC) -+ -+#define ADVERTISED_MPD BIT(10) /* Multi-port device */ -+ -+#define MMD_DEVAD 0x1f -+#define MMD_ACTYPE_SHIFT 14 -+#define MMD_ACTYPE_ADDRESS (0 << MMD_ACTYPE_SHIFT) -+#define MMD_ACTYPE_DATA (1 << MMD_ACTYPE_SHIFT) -+#define MMD_ACTYPE_DATA_PI (2 << MMD_ACTYPE_SHIFT) -+#define MMD_ACTYPE_DATA_PIWR (3 << MMD_ACTYPE_SHIFT) -+ -+static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev, -+ u16 regnum) -+{ -+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD); -+ phy_write(phydev, MII_MMDDATA, regnum); -+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD); -+ -+ return phy_read(phydev, MII_MMDDATA); -+} -+ -+static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev, -+ u16 regnum, u16 val) -+{ -+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD); -+ phy_write(phydev, MII_MMDDATA, regnum); -+ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD); -+ phy_write(phydev, MII_MMDDATA, val); -+ -+ return 0; -+} -+ -+static int vr9_gphy_config_init(struct phy_device *phydev) -+{ -+ int err; -+ -+ dev_dbg(&phydev->dev, "%s\n", __func__); -+ -+ /* Mask all interrupts */ -+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0); -+ if (err) -+ return err; -+ -+ /* Clear all pending interrupts */ -+ phy_read(phydev, MII_VR9_11G_ISTAT); -+ -+ return 0; -+} -+ -+static int vr9_gphy_config_aneg(struct phy_device *phydev) -+{ -+ int reg, err; -+ -+ /* Advertise as multi-port device */ -+ reg = phy_read(phydev, MII_CTRL1000); -+ reg |= ADVERTISED_MPD; -+ err = phy_write(phydev, MII_CTRL1000, reg); -+ if (err) -+ return err; -+ -+ return genphy_config_aneg(phydev); -+} -+ -+static int vr9_gphy_ack_interrupt(struct phy_device *phydev) -+{ -+ int reg; -+ -+ /* -+ * Possible IRQ numbers: -+ * - IM3_IRL18 for GPHY0 -+ * - IM3_IRL17 for GPHY1 -+ * -+ * Due to a silicon bug IRQ lines are not really independent from -+ * each other. Sometimes the two lines are driven at the same time -+ * if only one GPHY core raises the interrupt. -+ */ -+ -+ reg = phy_read(phydev, MII_VR9_11G_ISTAT); -+ -+ return (reg < 0) ? reg : 0; -+} -+ -+static int vr9_gphy_did_interrupt(struct phy_device *phydev) -+{ -+ int reg; -+ -+ reg = phy_read(phydev, MII_VR9_11G_ISTAT); -+ -+ return reg > 0; -+} -+ -+static int vr9_gphy_config_intr(struct phy_device *phydev) -+{ -+ int err; -+ -+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) -+ err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK); -+ else -+ err = phy_write(phydev, MII_VR9_11G_IMASK, 0); -+ -+ return err; -+} -+ -+static struct phy_driver lantiq_phy[] = { -+ { -+ .phy_id = 0xd565a400, -+ .phy_id_mask = 0xffffffff, -+ .name = "Lantiq XWAY PEF7071", -+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), -+ .flags = 0, /*PHY_HAS_INTERRUPT,*/ -+ .config_init = vr9_gphy_config_init, -+ .config_aneg = vr9_gphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = vr9_gphy_ack_interrupt, -+ .did_interrupt = vr9_gphy_did_interrupt, -+ .config_intr = vr9_gphy_config_intr, -+ .driver = { .owner = THIS_MODULE }, -+ }, { -+ .phy_id = 0x030260D0, -+ .phy_id_mask = 0xfffffff0, -+ .name = "Lantiq XWAY VR9 GPHY 11G v1.3", -+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), -+ .flags = 0, /*PHY_HAS_INTERRUPT,*/ -+ .config_init = vr9_gphy_config_init, -+ .config_aneg = vr9_gphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = vr9_gphy_ack_interrupt, -+ .did_interrupt = vr9_gphy_did_interrupt, -+ .config_intr = vr9_gphy_config_intr, -+ .driver = { .owner = THIS_MODULE }, -+ }, { -+ .phy_id = 0xd565a408, -+ .phy_id_mask = 0xfffffff8, -+ .name = "Lantiq XWAY VR9 GPHY 11G v1.4", -+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), -+ .flags = 0, /*PHY_HAS_INTERRUPT,*/ -+ .config_init = vr9_gphy_config_init, -+ .config_aneg = vr9_gphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = vr9_gphy_ack_interrupt, -+ .did_interrupt = vr9_gphy_did_interrupt, -+ .config_intr = vr9_gphy_config_intr, -+ .driver = { .owner = THIS_MODULE }, -+ }, { -+ .phy_id = 0xd565a418, -+ .phy_id_mask = 0xfffffff8, -+ .name = "Lantiq XWAY XRX PHY22F v1.4", -+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), -+ .flags = 0, /*PHY_HAS_INTERRUPT,*/ -+ .config_init = vr9_gphy_config_init, -+ .config_aneg = vr9_gphy_config_aneg, -+ .read_status = genphy_read_status, -+ .ack_interrupt = vr9_gphy_ack_interrupt, -+ .did_interrupt = vr9_gphy_did_interrupt, -+ .config_intr = vr9_gphy_config_intr, -+ .driver = { .owner = THIS_MODULE }, -+ }, -+}; -+ -+static int __init ltq_phy_init(void) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) { -+ int err = phy_driver_register(&lantiq_phy[i]); -+ if (err) -+ pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name); -+ } -+ -+ return 0; -+} -+ -+static void __exit ltq_phy_exit(void) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) -+ phy_driver_unregister(&lantiq_phy[i]); -+} -+ -+module_init(ltq_phy_init); -+module_exit(ltq_phy_exit); -+ -+MODULE_DESCRIPTION("Lantiq PHY drivers"); -+MODULE_AUTHOR("Daniel Schwierzeck "); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/patches-3.7/0116-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch b/target/linux/lantiq/patches-3.7/0116-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch deleted file mode 100644 index 218a43d577..0000000000 --- a/target/linux/lantiq/patches-3.7/0116-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch +++ /dev/null @@ -1,801 +0,0 @@ -From c7b0e371e1c5e2f6258decfeb948e0dda7109afc Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Wed, 24 Oct 2012 19:50:30 +0200 -Subject: [PATCH 116/123] NET: MIPS: lantiq: update etop driver for devicetree - ---- - drivers/net/ethernet/lantiq_etop.c | 470 +++++++++++++++++++++++++----------- - 1 file changed, 333 insertions(+), 137 deletions(-) - ---- a/drivers/net/ethernet/lantiq_etop.c -+++ b/drivers/net/ethernet/lantiq_etop.c -@@ -12,7 +12,7 @@ - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * -- * Copyright (C) 2011 John Crispin -+ * Copyright (C) 2011-12 John Crispin - */ - - #include -@@ -36,6 +36,10 @@ - #include - #include - #include -+#include -+#include -+#include -+#include - - #include - -@@ -71,25 +75,56 @@ - #define ETOP_MII_REVERSE 0xe - #define ETOP_PLEN_UNDER 0x40 - #define ETOP_CGEN 0x800 -+#define ETOP_CFG_MII0 0x01 - --/* use 2 static channels for TX/RX */ --#define LTQ_ETOP_TX_CHANNEL 1 --#define LTQ_ETOP_RX_CHANNEL 6 --#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL) --#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL) -+#define LTQ_GBIT_MDIO_CTL 0xCC -+#define LTQ_GBIT_MDIO_DATA 0xd0 -+#define LTQ_GBIT_GCTL0 0x68 -+#define LTQ_GBIT_PMAC_HD_CTL 0x8c -+#define LTQ_GBIT_P0_CTL 0x4 -+#define LTQ_GBIT_PMAC_RX_IPG 0xa8 -+ -+#define PMAC_HD_CTL_AS (1 << 19) -+#define PMAC_HD_CTL_RXSH (1 << 22) -+ -+/* Switch Enable (0=disable, 1=enable) */ -+#define GCTL0_SE 0x80000000 -+/* Disable MDIO auto polling (0=disable, 1=enable) */ -+#define PX_CTL_DMDIO 0x00400000 -+ -+/* register information for the gbit's MDIO bus */ -+#define MDIO_XR9_REQUEST 0x00008000 -+#define MDIO_XR9_READ 0x00000800 -+#define MDIO_XR9_WRITE 0x00000400 -+#define MDIO_XR9_REG_MASK 0x1f -+#define MDIO_XR9_ADDR_MASK 0x1f -+#define MDIO_XR9_RD_MASK 0xffff -+#define MDIO_XR9_REG_OFFSET 0 -+#define MDIO_XR9_ADDR_OFFSET 5 -+#define MDIO_XR9_WR_OFFSET 16 - -+#define LTQ_DMA_ETOP ((of_machine_is_compatible("lantiq,ase")) ? \ -+ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0)) -+ -+/* the newer xway socks have a embedded 3/7 port gbit multiplexer */ - #define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x)) - #define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y)) - #define ltq_etop_w32_mask(x, y, z) \ - ltq_w32_mask(x, y, ltq_etop_membase + (z)) - --#define DRV_VERSION "1.0" -+#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x)) -+#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y)) -+#define ltq_gbit_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, ltq_gbit_membase + (z)) -+ -+#define DRV_VERSION "1.2" - - static void __iomem *ltq_etop_membase; -+static void __iomem *ltq_gbit_membase; - - struct ltq_etop_chan { -- int idx; - int tx_free; -+ int irq; - struct net_device *netdev; - struct napi_struct napi; - struct ltq_dma_channel dma; -@@ -99,22 +134,35 @@ struct ltq_etop_chan { - struct ltq_etop_priv { - struct net_device *netdev; - struct platform_device *pdev; -- struct ltq_eth_data *pldata; - struct resource *res; - - struct mii_bus *mii_bus; - struct phy_device *phydev; - -- struct ltq_etop_chan ch[MAX_DMA_CHAN]; -- int tx_free[MAX_DMA_CHAN >> 1]; -+ struct ltq_etop_chan txch; -+ struct ltq_etop_chan rxch; -+ -+ int tx_irq; -+ int rx_irq; -+ -+ const void *mac; -+ int mii_mode; - - spinlock_t lock; -+ -+ struct clk *clk_ppe; -+ struct clk *clk_switch; -+ struct clk *clk_ephy; -+ struct clk *clk_ephycgu; - }; - -+static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, -+ int phy_reg, u16 phy_data); -+ - static int - ltq_etop_alloc_skb(struct ltq_etop_chan *ch) - { -- ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN); -+ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN); - if (!ch->skb[ch->dma.desc]) - return -ENOMEM; - ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL, -@@ -149,8 +197,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan - spin_unlock_irqrestore(&priv->lock, flags); - - skb_put(skb, len); -+ skb->dev = ch->netdev; - skb->protocol = eth_type_trans(skb, ch->netdev); - netif_receive_skb(skb); -+ ch->netdev->stats.rx_packets++; -+ ch->netdev->stats.rx_bytes += len; - } - - static int -@@ -158,8 +209,10 @@ ltq_etop_poll_rx(struct napi_struct *nap - { - struct ltq_etop_chan *ch = container_of(napi, - struct ltq_etop_chan, napi); -+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev); - int rx = 0; - int complete = 0; -+ unsigned long flags; - - while ((rx < budget) && !complete) { - struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -@@ -173,7 +226,9 @@ ltq_etop_poll_rx(struct napi_struct *nap - } - if (complete || !rx) { - napi_complete(&ch->napi); -+ spin_lock_irqsave(&priv->lock, flags); - ltq_dma_ack_irq(&ch->dma); -+ spin_unlock_irqrestore(&priv->lock, flags); - } - return rx; - } -@@ -185,12 +240,14 @@ ltq_etop_poll_tx(struct napi_struct *nap - container_of(napi, struct ltq_etop_chan, napi); - struct ltq_etop_priv *priv = netdev_priv(ch->netdev); - struct netdev_queue *txq = -- netdev_get_tx_queue(ch->netdev, ch->idx >> 1); -+ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - while ((ch->dma.desc_base[ch->tx_free].ctl & - (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { -+ ch->netdev->stats.tx_packets++; -+ ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len; - dev_kfree_skb_any(ch->skb[ch->tx_free]); - ch->skb[ch->tx_free] = NULL; - memset(&ch->dma.desc_base[ch->tx_free], 0, -@@ -203,7 +260,9 @@ ltq_etop_poll_tx(struct napi_struct *nap - if (netif_tx_queue_stopped(txq)) - netif_tx_start_queue(txq); - napi_complete(&ch->napi); -+ spin_lock_irqsave(&priv->lock, flags); - ltq_dma_ack_irq(&ch->dma); -+ spin_unlock_irqrestore(&priv->lock, flags); - return 1; - } - -@@ -211,9 +270,10 @@ static irqreturn_t - ltq_etop_dma_irq(int irq, void *_priv) - { - struct ltq_etop_priv *priv = _priv; -- int ch = irq - LTQ_DMA_CH0_INT; -- -- napi_schedule(&priv->ch[ch].napi); -+ if (irq == priv->txch.dma.irq) -+ napi_schedule(&priv->txch.napi); -+ else -+ napi_schedule(&priv->rxch.napi); - return IRQ_HANDLED; - } - -@@ -225,7 +285,7 @@ ltq_etop_free_channel(struct net_device - ltq_dma_free(&ch->dma); - if (ch->dma.irq) - free_irq(ch->dma.irq, priv); -- if (IS_RX(ch->idx)) { -+ if (ch == &priv->txch) { - int desc; - for (desc = 0; desc < LTQ_DESC_NUM; desc++) - dev_kfree_skb_any(ch->skb[ch->dma.desc]); -@@ -236,23 +296,55 @@ static void - ltq_etop_hw_exit(struct net_device *dev) - { - struct ltq_etop_priv *priv = netdev_priv(dev); -- int i; - -- ltq_pmu_disable(PMU_PPE); -- for (i = 0; i < MAX_DMA_CHAN; i++) -- if (IS_TX(i) || IS_RX(i)) -- ltq_etop_free_channel(dev, &priv->ch[i]); -+ clk_disable(priv->clk_ppe); -+ -+ if (of_machine_is_compatible("lantiq,ar9")) -+ clk_disable(priv->clk_switch); -+ -+ if (of_machine_is_compatible("lantiq,ase")) { -+ clk_disable(priv->clk_ephy); -+ clk_disable(priv->clk_ephycgu); -+ } -+ -+ ltq_etop_free_channel(dev, &priv->txch); -+ ltq_etop_free_channel(dev, &priv->rxch); -+} -+ -+static void -+ltq_etop_gbit_init(struct net_device *dev) -+{ -+ struct ltq_etop_priv *priv = netdev_priv(dev); -+ -+ clk_enable(priv->clk_switch); -+ -+ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0); -+ /** Disable MDIO auto polling mode */ -+ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL); -+ /* set 1522 packet size */ -+ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0); -+ /* disable pmac & dmac headers */ -+ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0, -+ LTQ_GBIT_PMAC_HD_CTL); -+ /* Due to traffic halt when burst length 8, -+ replace default IPG value with 0x3B */ -+ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG); - } - - static int - ltq_etop_hw_init(struct net_device *dev) - { - struct ltq_etop_priv *priv = netdev_priv(dev); -- int i; - -- ltq_pmu_enable(PMU_PPE); -+ clk_enable(priv->clk_ppe); -+ -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ ltq_etop_gbit_init(dev); -+ /* force the etops link to the gbit to MII */ -+ priv->mii_mode = PHY_INTERFACE_MODE_MII; -+ } - -- switch (priv->pldata->mii_mode) { -+ switch (priv->mii_mode) { - case PHY_INTERFACE_MODE_RMII: - ltq_etop_w32_mask(ETOP_MII_MASK, - ETOP_MII_REVERSE, LTQ_ETOP_CFG); -@@ -264,39 +356,68 @@ ltq_etop_hw_init(struct net_device *dev) - break; - - default: -+ if (of_machine_is_compatible("lantiq,ase")) { -+ clk_enable(priv->clk_ephy); -+ /* disable external MII */ -+ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG); -+ /* enable clock for internal PHY */ -+ clk_enable(priv->clk_ephycgu); -+ /* we need to write this magic to the internal phy to -+ make it work */ -+ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020); -+ pr_info("Selected EPHY mode\n"); -+ break; -+ } - netdev_err(dev, "unknown mii mode %d\n", -- priv->pldata->mii_mode); -+ priv->mii_mode); - return -ENOTSUPP; - } - - /* enable crc generation */ - ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG); - -+ return 0; -+} -+ -+static int -+ltq_etop_dma_init(struct net_device *dev) -+{ -+ struct ltq_etop_priv *priv = netdev_priv(dev); -+ int tx = priv->tx_irq - LTQ_DMA_ETOP; -+ int rx = priv->rx_irq - LTQ_DMA_ETOP; -+ int err; -+ - ltq_dma_init_port(DMA_PORT_ETOP); - -- for (i = 0; i < MAX_DMA_CHAN; i++) { -- int irq = LTQ_DMA_CH0_INT + i; -- struct ltq_etop_chan *ch = &priv->ch[i]; -- -- ch->idx = ch->dma.nr = i; -- -- if (IS_TX(i)) { -- ltq_dma_alloc_tx(&ch->dma); -- request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED, -- "etop_tx", priv); -- } else if (IS_RX(i)) { -- ltq_dma_alloc_rx(&ch->dma); -- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; -- ch->dma.desc++) -- if (ltq_etop_alloc_skb(ch)) -- return -ENOMEM; -- ch->dma.desc = 0; -- request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED, -- "etop_rx", priv); -+ priv->txch.dma.nr = tx; -+ ltq_dma_alloc_tx(&priv->txch.dma); -+ err = request_irq(priv->tx_irq, ltq_etop_dma_irq, IRQF_DISABLED, -+ "eth_tx", priv); -+ if (err) { -+ netdev_err(dev, "failed to allocate tx irq\n"); -+ goto err_out; -+ } -+ priv->txch.dma.irq = priv->tx_irq; -+ -+ priv->rxch.dma.nr = rx; -+ ltq_dma_alloc_rx(&priv->rxch.dma); -+ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM; -+ priv->rxch.dma.desc++) { -+ if (ltq_etop_alloc_skb(&priv->rxch)) { -+ netdev_err(dev, "failed to allocate skbs\n"); -+ err = -ENOMEM; -+ goto err_out; - } -- ch->dma.irq = irq; - } -- return 0; -+ priv->rxch.dma.desc = 0; -+ err = request_irq(priv->rx_irq, ltq_etop_dma_irq, IRQF_DISABLED, -+ "eth_rx", priv); -+ if (err) -+ netdev_err(dev, "failed to allocate rx irq\n"); -+ else -+ priv->rxch.dma.irq = priv->rx_irq; -+err_out: -+ return err; - } - - static void -@@ -312,7 +433,10 @@ ltq_etop_get_settings(struct net_device - { - struct ltq_etop_priv *priv = netdev_priv(dev); - -- return phy_ethtool_gset(priv->phydev, cmd); -+ if (priv->phydev) -+ return phy_ethtool_gset(priv->phydev, cmd); -+ else -+ return 0; - } - - static int -@@ -320,7 +444,10 @@ ltq_etop_set_settings(struct net_device - { - struct ltq_etop_priv *priv = netdev_priv(dev); - -- return phy_ethtool_sset(priv->phydev, cmd); -+ if (priv->phydev) -+ return phy_ethtool_sset(priv->phydev, cmd); -+ else -+ return 0; - } - - static int -@@ -328,7 +455,10 @@ ltq_etop_nway_reset(struct net_device *d - { - struct ltq_etop_priv *priv = netdev_priv(dev); - -- return phy_start_aneg(priv->phydev); -+ if (priv->phydev) -+ return phy_start_aneg(priv->phydev); -+ else -+ return 0; - } - - static const struct ethtool_ops ltq_etop_ethtool_ops = { -@@ -339,6 +469,39 @@ static const struct ethtool_ops ltq_etop - }; - - static int -+ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr, -+ int phy_reg, u16 phy_data) -+{ -+ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE | -+ (phy_data << MDIO_XR9_WR_OFFSET) | -+ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) | -+ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET); -+ -+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) -+ ; -+ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL); -+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) -+ ; -+ return 0; -+} -+ -+static int -+ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg) -+{ -+ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ | -+ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) | -+ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET); -+ -+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) -+ ; -+ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL); -+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) -+ ; -+ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK; -+ return val; -+} -+ -+static int - ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data) - { - u32 val = MDIO_REQUEST | -@@ -379,14 +542,11 @@ ltq_etop_mdio_probe(struct net_device *d - { - struct ltq_etop_priv *priv = netdev_priv(dev); - struct phy_device *phydev = NULL; -- int phy_addr; - -- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { -- if (priv->mii_bus->phy_map[phy_addr]) { -- phydev = priv->mii_bus->phy_map[phy_addr]; -- break; -- } -- } -+ if (of_machine_is_compatible("lantiq,ase")) -+ phydev = priv->mii_bus->phy_map[8]; -+ else -+ phydev = priv->mii_bus->phy_map[0]; - - if (!phydev) { - netdev_err(dev, "no PHY found\n"); -@@ -394,7 +554,7 @@ ltq_etop_mdio_probe(struct net_device *d - } - - phydev = phy_connect(dev, dev_name(&phydev->dev), <q_etop_mdio_link, -- 0, priv->pldata->mii_mode); -+ 0, priv->mii_mode); - - if (IS_ERR(phydev)) { - netdev_err(dev, "Could not attach to PHY\n"); -@@ -408,6 +568,9 @@ ltq_etop_mdio_probe(struct net_device *d - | SUPPORTED_Autoneg - | SUPPORTED_MII - | SUPPORTED_TP); -+ if (of_machine_is_compatible("lantiq,ar9")) -+ phydev->supported &= SUPPORTED_1000baseT_Half -+ | SUPPORTED_1000baseT_Full; - - phydev->advertising = phydev->supported; - priv->phydev = phydev; -@@ -433,8 +596,13 @@ ltq_etop_mdio_init(struct net_device *de - } - - priv->mii_bus->priv = dev; -- priv->mii_bus->read = ltq_etop_mdio_rd; -- priv->mii_bus->write = ltq_etop_mdio_wr; -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ priv->mii_bus->read = ltq_etop_mdio_rd_xr9; -+ priv->mii_bus->write = ltq_etop_mdio_wr_xr9; -+ } else { -+ priv->mii_bus->read = ltq_etop_mdio_rd; -+ priv->mii_bus->write = ltq_etop_mdio_wr; -+ } - priv->mii_bus->name = "ltq_mii"; - snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", - priv->pdev->name, priv->pdev->id); -@@ -483,17 +651,19 @@ static int - ltq_etop_open(struct net_device *dev) - { - struct ltq_etop_priv *priv = netdev_priv(dev); -- int i; -+ unsigned long flags; - -- for (i = 0; i < MAX_DMA_CHAN; i++) { -- struct ltq_etop_chan *ch = &priv->ch[i]; -+ napi_enable(&priv->txch.napi); -+ napi_enable(&priv->rxch.napi); -+ -+ spin_lock_irqsave(&priv->lock, flags); -+ ltq_dma_open(&priv->txch.dma); -+ ltq_dma_open(&priv->rxch.dma); -+ spin_unlock_irqrestore(&priv->lock, flags); -+ -+ if (priv->phydev) -+ phy_start(priv->phydev); - -- if (!IS_TX(i) && (!IS_RX(i))) -- continue; -- ltq_dma_open(&ch->dma); -- napi_enable(&ch->napi); -- } -- phy_start(priv->phydev); - netif_tx_start_all_queues(dev); - return 0; - } -@@ -502,18 +672,19 @@ static int - ltq_etop_stop(struct net_device *dev) - { - struct ltq_etop_priv *priv = netdev_priv(dev); -- int i; -+ unsigned long flags; - - netif_tx_stop_all_queues(dev); -- phy_stop(priv->phydev); -- for (i = 0; i < MAX_DMA_CHAN; i++) { -- struct ltq_etop_chan *ch = &priv->ch[i]; -- -- if (!IS_RX(i) && !IS_TX(i)) -- continue; -- napi_disable(&ch->napi); -- ltq_dma_close(&ch->dma); -- } -+ if (priv->phydev) -+ phy_stop(priv->phydev); -+ napi_disable(&priv->txch.napi); -+ napi_disable(&priv->rxch.napi); -+ -+ spin_lock_irqsave(&priv->lock, flags); -+ ltq_dma_close(&priv->txch.dma); -+ ltq_dma_close(&priv->rxch.dma); -+ spin_unlock_irqrestore(&priv->lock, flags); -+ - return 0; - } - -@@ -523,16 +694,16 @@ ltq_etop_tx(struct sk_buff *skb, struct - int queue = skb_get_queue_mapping(skb); - struct netdev_queue *txq = netdev_get_tx_queue(dev, queue); - struct ltq_etop_priv *priv = netdev_priv(dev); -- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1]; -- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -- int len; -+ struct ltq_dma_desc *desc = -+ &priv->txch.dma.desc_base[priv->txch.dma.desc]; - unsigned long flags; - u32 byte_offset; -+ int len; - - len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; - -- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { -- dev_kfree_skb_any(skb); -+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || -+ priv->txch.skb[priv->txch.dma.desc]) { - netdev_err(dev, "tx ring full\n"); - netif_tx_stop_queue(txq); - return NETDEV_TX_BUSY; -@@ -540,7 +711,7 @@ ltq_etop_tx(struct sk_buff *skb, struct - - /* dma needs to start on a 16 byte aligned address */ - byte_offset = CPHYSADDR(skb->data) % 16; -- ch->skb[ch->dma.desc] = skb; -+ priv->txch.skb[priv->txch.dma.desc] = skb; - - dev->trans_start = jiffies; - -@@ -550,11 +721,11 @@ ltq_etop_tx(struct sk_buff *skb, struct - wmb(); - desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | - LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); -- ch->dma.desc++; -- ch->dma.desc %= LTQ_DESC_NUM; -+ priv->txch.dma.desc++; -+ priv->txch.dma.desc %= LTQ_DESC_NUM; - spin_unlock_irqrestore(&priv->lock, flags); - -- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN) -+ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN) - netif_tx_stop_queue(txq); - - return NETDEV_TX_OK; -@@ -633,34 +804,32 @@ ltq_etop_init(struct net_device *dev) - struct ltq_etop_priv *priv = netdev_priv(dev); - struct sockaddr mac; - int err; -- bool random_mac = false; - - ether_setup(dev); - dev->watchdog_timeo = 10 * HZ; - err = ltq_etop_hw_init(dev); - if (err) - goto err_hw; -+ err = ltq_etop_dma_init(dev); -+ if (err) -+ goto err_hw; -+ - ltq_etop_change_mtu(dev, 1500); - -- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); -+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); - if (!is_valid_ether_addr(mac.sa_data)) { - pr_warn("etop: invalid MAC, using random\n"); -- eth_random_addr(mac.sa_data); -- random_mac = true; -+ random_ether_addr(mac.sa_data); - } - - err = ltq_etop_set_mac_address(dev, &mac); - if (err) - goto err_netdev; -- -- /* Set addr_assign_type here, ltq_etop_set_mac_address would reset it. */ -- if (random_mac) -- dev->addr_assign_type |= NET_ADDR_RANDOM; -- - ltq_etop_set_multicast_list(dev); -- err = ltq_etop_mdio_init(dev); -- if (err) -- goto err_netdev; -+ if (!ltq_etop_mdio_init(dev)) -+ dev->ethtool_ops = <q_etop_ethtool_ops; -+ else -+ pr_warn("etop: mdio probe failed\n");; - return 0; - - err_netdev: -@@ -680,6 +849,9 @@ ltq_etop_tx_timeout(struct net_device *d - err = ltq_etop_hw_init(dev); - if (err) - goto err_hw; -+ err = ltq_etop_dma_init(dev); -+ if (err) -+ goto err_hw; - dev->trans_start = jiffies; - netif_wake_queue(dev); - return; -@@ -703,14 +875,19 @@ static const struct net_device_ops ltq_e - .ndo_tx_timeout = ltq_etop_tx_timeout, - }; - --static int __init -+static int __devinit - ltq_etop_probe(struct platform_device *pdev) - { - struct net_device *dev; - struct ltq_etop_priv *priv; -- struct resource *res; -+ struct resource *res, *gbit_res, irqres[2]; - int err; -- int i; -+ -+ err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2); -+ if (err != 2) { -+ dev_err(&pdev->dev, "failed to get etop irqs\n"); -+ return -EINVAL; -+ } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { -@@ -736,30 +913,58 @@ ltq_etop_probe(struct platform_device *p - goto err_out; - } - -- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4); -- if (!dev) { -- err = -ENOMEM; -- goto err_out; -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ if (!gbit_res) { -+ dev_err(&pdev->dev, "failed to get gbit resource\n"); -+ err = -ENOENT; -+ goto err_out; -+ } -+ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev, -+ gbit_res->start, resource_size(gbit_res)); -+ if (!ltq_gbit_membase) { -+ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n", -+ pdev->id); -+ err = -ENOMEM; -+ goto err_out; -+ } - } -+ -+ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4); - strcpy(dev->name, "eth%d"); - dev->netdev_ops = <q_eth_netdev_ops; -- dev->ethtool_ops = <q_etop_ethtool_ops; - priv = netdev_priv(dev); - priv->res = res; - priv->pdev = pdev; -- priv->pldata = dev_get_platdata(&pdev->dev); - priv->netdev = dev; -+ priv->tx_irq = irqres[0].start; -+ priv->rx_irq = irqres[1].start; -+ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node); -+ priv->mac = of_get_mac_address(pdev->dev.of_node); -+ -+ priv->clk_ppe = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(priv->clk_ppe)) -+ return PTR_ERR(priv->clk_ppe); -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ priv->clk_switch = clk_get(&pdev->dev, "switch"); -+ if (IS_ERR(priv->clk_switch)) -+ return PTR_ERR(priv->clk_switch); -+ } -+ if (of_machine_is_compatible("lantiq,ase")) { -+ priv->clk_ephy = clk_get(&pdev->dev, "ephy"); -+ if (IS_ERR(priv->clk_ephy)) -+ return PTR_ERR(priv->clk_ephy); -+ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu"); -+ if (IS_ERR(priv->clk_ephycgu)) -+ return PTR_ERR(priv->clk_ephycgu); -+ } -+ - spin_lock_init(&priv->lock); - -- for (i = 0; i < MAX_DMA_CHAN; i++) { -- if (IS_TX(i)) -- netif_napi_add(dev, &priv->ch[i].napi, -- ltq_etop_poll_tx, 8); -- else if (IS_RX(i)) -- netif_napi_add(dev, &priv->ch[i].napi, -- ltq_etop_poll_rx, 32); -- priv->ch[i].netdev = dev; -- } -+ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8); -+ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32); -+ priv->txch.netdev = dev; -+ priv->rxch.netdev = dev; - - err = register_netdev(dev); - if (err) -@@ -788,32 +993,23 @@ ltq_etop_remove(struct platform_device * - return 0; - } - -+static const struct of_device_id ltq_etop_match[] = { -+ { .compatible = "lantiq,etop-xway" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ltq_etop_match); -+ - static struct platform_driver ltq_mii_driver = { -+ .probe = ltq_etop_probe, - .remove = __devexit_p(ltq_etop_remove), - .driver = { - .name = "ltq_etop", - .owner = THIS_MODULE, -+ .of_match_table = ltq_etop_match, - }, - }; - --int __init --init_ltq_etop(void) --{ -- int ret = platform_driver_probe(<q_mii_driver, ltq_etop_probe); -- -- if (ret) -- pr_err("ltq_etop: Error registering platform driver!"); -- return ret; --} -- --static void __exit --exit_ltq_etop(void) --{ -- platform_driver_unregister(<q_mii_driver); --} -- --module_init(init_ltq_etop); --module_exit(exit_ltq_etop); -+module_platform_driver(ltq_mii_driver); - - MODULE_AUTHOR("John Crispin "); - MODULE_DESCRIPTION("Lantiq SoC ETOP"); diff --git a/target/linux/lantiq/patches-3.7/0117-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-3.7/0117-NET-MIPS-lantiq-adds-xrx200-net.patch deleted file mode 100644 index 478e05d061..0000000000 --- a/target/linux/lantiq/patches-3.7/0117-NET-MIPS-lantiq-adds-xrx200-net.patch +++ /dev/null @@ -1,1413 +0,0 @@ -From a0a6f7f03c914327064364767b7ba688cdbcf611 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 22 Oct 2012 12:22:23 +0200 -Subject: [PATCH 117/123] NET: MIPS: lantiq: adds xrx200-net - ---- - drivers/net/ethernet/Kconfig | 8 +- - drivers/net/ethernet/Makefile | 1 + - drivers/net/ethernet/lantiq_pce.h | 163 +++++ - drivers/net/ethernet/lantiq_xrx200.c | 1191 ++++++++++++++++++++++++++++++++++ - 4 files changed, 1362 insertions(+), 1 deletion(-) - create mode 100644 drivers/net/ethernet/lantiq_pce.h - create mode 100644 drivers/net/ethernet/lantiq_xrx200.c - ---- a/drivers/net/ethernet/Kconfig -+++ b/drivers/net/ethernet/Kconfig -@@ -83,7 +83,13 @@ config LANTIQ_ETOP - tristate "Lantiq SoC ETOP driver" - depends on SOC_TYPE_XWAY - ---help--- -- Support for the MII0 inside the Lantiq SoC -+ Support for the MII0 inside the Lantiq ADSL SoC -+ -+config LANTIQ_XRX200 -+ tristate "Lantiq SoC XRX200 driver" -+ depends on SOC_TYPE_XWAY -+ ---help--- -+ Support for the MII0 inside the Lantiq VDSL SoC - - source "drivers/net/ethernet/marvell/Kconfig" - source "drivers/net/ethernet/mellanox/Kconfig" ---- a/drivers/net/ethernet/Makefile -+++ b/drivers/net/ethernet/Makefile -@@ -36,6 +36,7 @@ obj-$(CONFIG_IP1000) += icplus/ - obj-$(CONFIG_JME) += jme.o - obj-$(CONFIG_KORINA) += korina.o - obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o -+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o - obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/ - obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ - obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/ ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_pce.h -@@ -0,0 +1,163 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland GmbH -+ * Copyright (C) 2012 John Crispin -+ * -+ * PCE microcode extracted from UGW5.2 switch api -+ */ -+ -+/* Switch API Micro Code V0.3 */ -+enum { -+ OUT_MAC0 = 0, -+ OUT_MAC1, -+ OUT_MAC2, -+ OUT_MAC3, -+ OUT_MAC4, -+ OUT_MAC5, -+ OUT_ETHTYP, -+ OUT_VTAG0, -+ OUT_VTAG1, -+ OUT_ITAG0, -+ OUT_ITAG1, /*10 */ -+ OUT_ITAG2, -+ OUT_ITAG3, -+ OUT_IP0, -+ OUT_IP1, -+ OUT_IP2, -+ OUT_IP3, -+ OUT_SIP0, -+ OUT_SIP1, -+ OUT_SIP2, -+ OUT_SIP3, /*20*/ -+ OUT_SIP4, -+ OUT_SIP5, -+ OUT_SIP6, -+ OUT_SIP7, -+ OUT_DIP0, -+ OUT_DIP1, -+ OUT_DIP2, -+ OUT_DIP3, -+ OUT_DIP4, -+ OUT_DIP5, /*30*/ -+ OUT_DIP6, -+ OUT_DIP7, -+ OUT_SESID, -+ OUT_PROT, -+ OUT_APP0, -+ OUT_APP1, -+ OUT_IGMP0, -+ OUT_IGMP1, -+ OUT_IPOFF, /*39*/ -+ OUT_NONE = 63 -+}; -+ -+/* parser's microcode length type */ -+#define INSTR 0 -+#define IPV6 1 -+#define LENACCU 2 -+ -+/* parser's microcode flag type */ -+enum { -+ FLAG_ITAG = 0, -+ FLAG_VLAN, -+ FLAG_SNAP, -+ FLAG_PPPOE, -+ FLAG_IPV6, -+ FLAG_IPV6FL, -+ FLAG_IPV4, -+ FLAG_IGMP, -+ FLAG_TU, -+ FLAG_HOP, -+ FLAG_NN1, /*10 */ -+ FLAG_NN2, -+ FLAG_END, -+ FLAG_NO, /*13*/ -+}; -+ -+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */ -+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \ -+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }} -+struct pce_microcode { -+ unsigned short val[4]; -+/* unsigned short val_2; -+ unsigned short val_1; -+ unsigned short val_0;*/ -+} pce_microcode[] = { -+ /* value mask ns fields L type flags ipv4_len */ -+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0), -+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0), -+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1), -+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0), -+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0), -+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0), -+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0), -+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0), -+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0), -+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+}; ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_xrx200.c -@@ -0,0 +1,1203 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland -+ * Copyright (C) 2012 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "lantiq_pce.h" -+ -+#define SW_POLLING -+#define SW_ROUTING -+#define SW_PORTMAP -+ -+#ifdef SW_ROUTING -+ #ifdef SW_PORTMAP -+#define XRX200_MAX_DEV 7 -+ #else -+#define XRX200_MAX_DEV 2 -+ #endif -+#else -+#define XRX200_MAX_DEV 1 -+#endif -+ -+#define XRX200_MAX_PORT 7 -+#define XRX200_MAX_DMA 8 -+ -+#define XRX200_HEADROOM 4 -+ -+#define XRX200_TX_TIMEOUT (10 * HZ) -+ -+/* port type */ -+#define XRX200_PORT_TYPE_PHY 1 -+#define XRX200_PORT_TYPE_MAC 2 -+ -+/* DMA */ -+#define XRX200_DMA_CRC_LEN 0x4 -+#define XRX200_DMA_DATA_LEN 0x600 -+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0 -+#define XRX200_DMA_RX 0 -+#define XRX200_DMA_TX 1 -+ -+/* fetch / store dma */ -+#define FDMA_PCTRL0 0x2A00 -+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18)) -+#define SDMA_PCTRL0 0x2F00 -+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18)) -+ -+/* buffer management */ -+#define BM_PCFG0 0x200 -+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8)) -+ -+/* MDIO */ -+#define MDIO_GLOB 0x0000 -+#define MDIO_CTRL 0x0020 -+#define MDIO_READ 0x0024 -+#define MDIO_WRITE 0x0028 -+#define MDIO_PHY0 0x0054 -+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned))) -+#define MDIO_CLK_CFG0 0x002C -+#define MDIO_CLK_CFG1 0x0030 -+ -+#define MDIO_GLOB_ENABLE 0x8000 -+#define MDIO_BUSY BIT(12) -+#define MDIO_RD BIT(11) -+#define MDIO_WR BIT(10) -+#define MDIO_MASK 0x1f -+#define MDIO_ADDRSHIFT 5 -+#define MDIO1_25MHZ 9 -+ -+#define MDIO_PHY_LINK_DOWN 0x4000 -+#define MDIO_PHY_LINK_UP 0x2000 -+ -+#define MDIO_PHY_SPEED_M10 0x0000 -+#define MDIO_PHY_SPEED_M100 0x0800 -+#define MDIO_PHY_SPEED_G1 0x1000 -+ -+#define MDIO_PHY_FDUP_EN 0x0600 -+#define MDIO_PHY_FDUP_DIS 0x0200 -+ -+#define MDIO_PHY_LINK_MASK 0x6000 -+#define MDIO_PHY_SPEED_MASK 0x1800 -+#define MDIO_PHY_FDUP_MASK 0x0600 -+#define MDIO_PHY_ADDR_MASK 0x001f -+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \ -+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK -+ -+/* MII */ -+#define MII_CFG(p) (p * 8) -+ -+#define MII_CFG_EN BIT(14) -+ -+#define MII_CFG_MODE_MIIP 0x0 -+#define MII_CFG_MODE_MIIM 0x1 -+#define MII_CFG_MODE_RMIIP 0x2 -+#define MII_CFG_MODE_RMIIM 0x3 -+#define MII_CFG_MODE_RGMII 0x4 -+#define MII_CFG_MODE_MASK 0xf -+ -+#define MII_CFG_RATE_M2P5 0x00 -+#define MII_CFG_RATE_M25 0x10 -+#define MII_CFG_RATE_M125 0x20 -+#define MII_CFG_RATE_M50 0x30 -+#define MII_CFG_RATE_AUTO 0x40 -+#define MII_CFG_RATE_MASK 0x70 -+ -+/* cpu port mac */ -+#define PMAC_HD_CTL 0x0000 -+#define PMAC_RX_IPG 0x0024 -+#define PMAC_EWAN 0x002c -+ -+#define PMAC_IPG_MASK 0xf -+#define PMAC_HD_CTL_AS 0x0008 -+#define PMAC_HD_CTL_AC 0x0004 -+#define PMAC_HD_CTL_RXSH 0x0040 -+#define PMAC_HD_CTL_AST 0x0080 -+#define PMAC_HD_CTL_RST 0x0100 -+ -+/* PCE */ -+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4)) -+#define PCE_TBL_MASK 0x1120 -+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4)) -+#define PCE_TBL_ADDR 0x1138 -+#define PCE_TBL_CTRL 0x113c -+#define PCE_PMAP1 0x114c -+#define PCE_PMAP2 0x1150 -+#define PCE_PMAP3 0x1154 -+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4)) -+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4)) -+ -+#define PCE_TBL_BUSY BIT(15) -+#define PCE_TBL_CFG_ADDR_MASK 0x1f -+#define PCE_TBL_CFG_ADWR 0x20 -+#define PCE_TBL_CFG_ADWR_MASK 0x60 -+#define PCE_INGRESS BIT(11) -+ -+/* MAC */ -+#define MAC_FLEN_REG (0x2314) -+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4)) -+ -+/* buffer management */ -+#define BM_PCFG(p) (0x200 + (p * 8)) -+ -+/* special tag in TX path header */ -+#define SPID_SHIFT 24 -+#define DPID_SHIFT 16 -+#define DPID_ENABLE 1 -+#define SPID_CPU_PORT 2 -+#define PORT_MAP_SEL BIT(15) -+#define PORT_MAP_EN BIT(14) -+#define PORT_MAP_SHIFT 1 -+#define PORT_MAP_MASK 0x3f -+ -+#define SPPID_MASK 0x7 -+#define SPPID_SHIFT 4 -+ -+/* MII regs not yet in linux */ -+#define MDIO_DEVAD_NONE (-1) -+#define ADVERTIZE_MPD (1 << 10) -+ -+struct xrx200_port { -+ u8 num; -+ u8 phy_addr; -+ u16 flags; -+ phy_interface_t phy_if; -+ -+ int link; -+ int gpio; -+ enum of_gpio_flags gpio_flags; -+ -+ struct phy_device *phydev; -+ struct device_node *phy_node; -+}; -+ -+struct xrx200_chan { -+ int idx; -+ int refcount; -+ int tx_free; -+ -+ struct net_device dummy_dev; -+ struct net_device *devs[XRX200_MAX_DEV]; -+ -+ struct napi_struct napi; -+ struct ltq_dma_channel dma; -+ struct sk_buff *skb[LTQ_DESC_NUM]; -+}; -+ -+struct xrx200_hw { -+ struct clk *clk; -+ struct mii_bus *mii_bus; -+ -+ struct xrx200_chan chan[XRX200_MAX_DMA]; -+ -+ struct net_device *devs[XRX200_MAX_DEV]; -+ int num_devs; -+ -+ int port_map[XRX200_MAX_PORT]; -+ unsigned short wan_map; -+ -+ spinlock_t lock; -+}; -+ -+struct xrx200_priv { -+ struct net_device_stats stats; -+ int id; -+ -+ struct xrx200_port port[XRX200_MAX_PORT]; -+ int num_port; -+ int wan; -+ unsigned short port_map; -+ const void *mac; -+ -+ struct xrx200_hw *hw; -+}; -+ -+static __iomem void *xrx200_switch_membase; -+static __iomem void *xrx200_mii_membase; -+static __iomem void *xrx200_mdio_membase; -+static __iomem void *xrx200_pmac_membase; -+ -+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x)) -+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y)) -+#define ltq_switch_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_switch_membase + (z)) -+ -+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x)) -+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y)) -+#define ltq_mdio_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z)) -+ -+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x)) -+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y)) -+#define ltq_mii_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_mii_membase + (z)) -+ -+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x)) -+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y)) -+#define ltq_pmac_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z)) -+ -+static int xrx200_open(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ unsigned long flags; -+ int i; -+ -+ for (i = 0; i < XRX200_MAX_DMA; i++) { -+ if (!priv->hw->chan[i].dma.irq) -+ continue; -+ spin_lock_irqsave(&priv->hw->lock, flags); -+ if (!priv->hw->chan[i].refcount) { -+ napi_enable(&priv->hw->chan[i].napi); -+ ltq_dma_open(&priv->hw->chan[i].dma); -+ } -+ priv->hw->chan[i].refcount++; -+ spin_unlock_irqrestore(&priv->hw->lock, flags); -+ } -+ for (i = 0; i < priv->num_port; i++) -+ if (priv->port[i].phydev) -+ phy_start(priv->port[i].phydev); -+ netif_start_queue(dev); -+ -+ return 0; -+} -+ -+static int xrx200_close(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ unsigned long flags; -+ int i; -+ -+ netif_stop_queue(dev); -+ -+ for (i = 0; i < priv->num_port; i++) -+ if (priv->port[i].phydev) -+ phy_stop(priv->port[i].phydev); -+ -+ for (i = 0; i < XRX200_MAX_DMA; i++) { -+ if (!priv->hw->chan[i].dma.irq) -+ continue; -+ spin_lock_irqsave(&priv->hw->lock, flags); -+ priv->hw->chan[i].refcount--; -+ if (!priv->hw->chan[i].refcount) { -+ napi_disable(&priv->hw->chan[i].napi); -+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma); -+ } -+ spin_unlock_irqrestore(&priv->hw->lock, flags); -+ } -+ -+ return 0; -+} -+ -+static int xrx200_alloc_skb(struct xrx200_chan *ch) -+{ -+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD) -+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD); -+ if (!ch->skb[ch->dma.desc]) -+ return -ENOMEM; -+ -+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD); -+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL, -+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN, -+ DMA_FROM_DEVICE); -+ ch->dma.desc_base[ch->dma.desc].addr = -+ CPHYSADDR(ch->skb[ch->dma.desc]->data); -+ ch->dma.desc_base[ch->dma.desc].ctl = -+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | -+ XRX200_DMA_DATA_LEN; -+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN); -+ -+ return 0; -+} -+ -+static void xrx200_hw_receive(struct xrx200_chan *ch, int id) -+{ -+ struct net_device *dev = ch->devs[id]; -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -+ struct sk_buff *skb = ch->skb[ch->dma.desc]; -+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - XRX200_DMA_CRC_LEN; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&priv->hw->lock, flags); -+ if (xrx200_alloc_skb(ch)) { -+ netdev_err(dev, -+ "failed to allocate new rx buffer, stopping DMA\n"); -+ ltq_dma_close(&ch->dma); -+ } -+ -+ ch->dma.desc++; -+ ch->dma.desc %= LTQ_DESC_NUM; -+ spin_unlock_irqrestore(&priv->hw->lock, flags); -+ -+ skb_put(skb, len); -+#ifdef SW_ROUTING -+ skb_pull(skb, 8); -+#endif -+ skb->dev = dev; -+ skb->protocol = eth_type_trans(skb, dev); -+ netif_receive_skb(skb); -+ priv->stats.rx_packets++; -+ priv->stats.rx_bytes+=len; -+} -+ -+static int xrx200_poll_rx(struct napi_struct *napi, int budget) -+{ -+ struct xrx200_chan *ch = container_of(napi, -+ struct xrx200_chan, napi); -+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]); -+ int rx = 0; -+ int complete = 0; -+ unsigned long flags; -+ -+ while ((rx < budget) && !complete) { -+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { -+#ifdef SW_ROUTING -+ struct sk_buff *skb = ch->skb[ch->dma.desc]; -+ u32 *special_tag = (u32*)skb->data; -+ int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK; -+ xrx200_hw_receive(ch, priv->hw->port_map[port]); -+#else -+ xrx200_hw_receive(ch, 0); -+#endif -+ rx++; -+ } else { -+ complete = 1; -+ } -+ } -+ if (complete || !rx) { -+ napi_complete(&ch->napi); -+ spin_lock_irqsave(&priv->hw->lock, flags); -+ ltq_dma_ack_irq(&ch->dma); -+ spin_unlock_irqrestore(&priv->hw->lock, flags); -+ } -+ return rx; -+} -+ -+static int xrx200_poll_tx(struct napi_struct *napi, int budget) -+{ -+ struct xrx200_chan *ch = -+ container_of(napi, struct xrx200_chan, napi); -+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]); -+ unsigned long flags; -+ int i; -+ -+ spin_lock_irqsave(&priv->hw->lock, flags); -+ while ((ch->dma.desc_base[ch->tx_free].ctl & -+ (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { -+ dev_kfree_skb_any(ch->skb[ch->tx_free]); -+ ch->skb[ch->tx_free] = NULL; -+ memset(&ch->dma.desc_base[ch->tx_free], 0, -+ sizeof(struct ltq_dma_desc)); -+ ch->tx_free++; -+ ch->tx_free %= LTQ_DESC_NUM; -+ } -+ spin_unlock_irqrestore(&priv->hw->lock, flags); -+ -+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) { -+ struct netdev_queue *txq = -+ netdev_get_tx_queue(ch->devs[i], 0); -+ if (netif_tx_queue_stopped(txq)) -+ netif_tx_start_queue(txq); -+ } -+ napi_complete(&ch->napi); -+ spin_lock_irqsave(&priv->hw->lock, flags); -+ ltq_dma_ack_irq(&ch->dma); -+ spin_unlock_irqrestore(&priv->hw->lock, flags); -+ -+ return 1; -+} -+ -+static struct net_device_stats *xrx200_get_stats (struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ -+ return &priv->stats; -+} -+ -+static void xrx200_tx_timeout(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ -+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name); -+ -+ priv->stats.tx_errors++; -+ netif_wake_queue(dev); -+} -+ -+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ int queue = skb_get_queue_mapping(skb); -+ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue); -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX]; -+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -+ unsigned long flags; -+ u32 byte_offset; -+ int len; -+#ifdef SW_ROUTING -+ #ifdef SW_PORTMAP -+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE; -+ #else -+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE; -+ #endif -+#endif -+ -+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; -+ -+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { -+ netdev_err(dev, "tx ring full\n"); -+ netif_tx_stop_queue(txq); -+ return NETDEV_TX_BUSY; -+ } -+#ifdef SW_ROUTING -+ #ifdef SW_PORTMAP -+ special_tag |= priv->port_map << PORT_MAP_SHIFT; -+ #else -+ if(priv->id) -+ special_tag |= (1 << DPID_SHIFT); -+ #endif -+ if(skb_headroom(skb) < 4) { -+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4); -+ dev_kfree_skb_any(skb); -+ skb = tmp; -+ } -+ skb_push(skb, 4); -+ memcpy(skb->data, &special_tag, sizeof(u32)); -+ len += 4; -+#endif -+ -+ /* dma needs to start on a 16 byte aligned address */ -+ byte_offset = CPHYSADDR(skb->data) % 16; -+ ch->skb[ch->dma.desc] = skb; -+ -+ dev->trans_start = jiffies; -+ -+ spin_lock_irqsave(&priv->hw->lock, flags); -+ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len, -+ DMA_TO_DEVICE)) - byte_offset; -+ wmb(); -+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | -+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); -+ ch->dma.desc++; -+ ch->dma.desc %= LTQ_DESC_NUM; -+ spin_unlock_irqrestore(&priv->hw->lock, flags); -+ -+ if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN) -+ netif_tx_stop_queue(txq); -+ -+ priv->stats.tx_packets++; -+ priv->stats.tx_bytes+=len; -+ -+ return NETDEV_TX_OK; -+} -+ -+static irqreturn_t xrx200_dma_irq(int irq, void *priv) -+{ -+ struct xrx200_hw *hw = priv; -+ int ch = irq - XRX200_DMA_IRQ; -+ -+ napi_schedule(&hw->chan[ch].napi); -+ -+ return IRQ_HANDLED; -+} -+ -+static int xrx200_dma_init(struct xrx200_hw *hw) -+{ -+ int i, err = 0; -+ -+ ltq_dma_init_port(DMA_PORT_ETOP); -+ -+ for (i = 0; i < 8 && !err; i++) { -+ int irq = XRX200_DMA_IRQ + i; -+ struct xrx200_chan *ch = &hw->chan[i]; -+ -+ ch->idx = ch->dma.nr = i; -+ -+ if (i == XRX200_DMA_TX) { -+ ltq_dma_alloc_tx(&ch->dma); -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw); -+ } else if (i == XRX200_DMA_RX) { -+ ltq_dma_alloc_rx(&ch->dma); -+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; -+ ch->dma.desc++) -+ if (xrx200_alloc_skb(ch)) -+ err = -ENOMEM; -+ ch->dma.desc = 0; -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw); -+ } else -+ continue; -+ -+ if (!err) -+ ch->dma.irq = irq; -+ } -+ -+ return err; -+} -+ -+#ifdef SW_POLLING -+static void xrx200_gmac_update(struct xrx200_port *port) -+{ -+ u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK; -+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK; -+ u16 miirate = 0; -+ -+ switch (port->phydev->speed) { -+ case SPEED_1000: -+ phyaddr |= MDIO_PHY_SPEED_G1; -+ miirate = MII_CFG_RATE_M125; -+ break; -+ -+ case SPEED_100: -+ phyaddr |= MDIO_PHY_SPEED_M100; -+ switch (miimode) { -+ case MII_CFG_MODE_RMIIM: -+ case MII_CFG_MODE_RMIIP: -+ miirate = MII_CFG_RATE_M50; -+ break; -+ default: -+ miirate = MII_CFG_RATE_M25; -+ break; -+ } -+ break; -+ -+ default: -+ phyaddr |= MDIO_PHY_SPEED_M10; -+ miirate = MII_CFG_RATE_M2P5; -+ break; -+ } -+ -+ if (port->phydev->link) -+ phyaddr |= MDIO_PHY_LINK_UP; -+ else -+ phyaddr |= MDIO_PHY_LINK_DOWN; -+ -+ if (port->phydev->duplex == DUPLEX_FULL) -+ phyaddr |= MDIO_PHY_FDUP_EN; -+ else -+ phyaddr |= MDIO_PHY_FDUP_DIS; -+ -+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num)); -+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num)); -+ udelay(1); -+} -+#else -+static void xrx200_gmac_update(struct xrx200_port *port) -+{ -+ -+} -+#endif -+ -+static void xrx200_mdio_link(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ for (i = 0; i < priv->num_port; i++) { -+ if (!priv->port[i].phydev) -+ continue; -+ -+ if (priv->port[i].link != priv->port[i].phydev->link) { -+ xrx200_gmac_update(&priv->port[i]); -+ priv->port[i].link = priv->port[i].phydev->link; -+ netdev_info(dev, "port %d %s link\n", -+ priv->port[i].num, -+ (priv->port[i].link)?("got"):("lost")); -+ } -+ } -+} -+ -+static inline int xrx200_mdio_poll(struct mii_bus *bus) -+{ -+ unsigned cnt = 10000; -+ -+ while (likely(cnt--)) { -+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL); -+ if ((ctrl & MDIO_BUSY) == 0) -+ return 0; -+ } -+ -+ return 1; -+} -+ -+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) -+{ -+ if (xrx200_mdio_poll(bus)) -+ return 1; -+ -+ ltq_mdio_w32(val, MDIO_WRITE); -+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR | -+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | -+ (reg & MDIO_MASK), -+ MDIO_CTRL); -+ -+ return 0; -+} -+ -+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg) -+{ -+ if (xrx200_mdio_poll(bus)) -+ return -1; -+ -+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD | -+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | -+ (reg & MDIO_MASK), -+ MDIO_CTRL); -+ -+ if (xrx200_mdio_poll(bus)) -+ return -1; -+ -+ return ltq_mdio_r32(MDIO_READ); -+} -+ -+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct phy_device *phydev = NULL; -+ unsigned val; -+ -+ phydev = priv->hw->mii_bus->phy_map[port->phy_addr]; -+ -+ if (!phydev) { -+ netdev_err(dev, "no PHY found\n"); -+ return -ENODEV; -+ } -+ -+ phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link, -+ 0, port->phy_if); -+ -+ if (IS_ERR(phydev)) { -+ netdev_err(dev, "Could not attach to PHY\n"); -+ return PTR_ERR(phydev); -+ } -+ -+ phydev->supported &= (SUPPORTED_10baseT_Half -+ | SUPPORTED_10baseT_Full -+ | SUPPORTED_100baseT_Half -+ | SUPPORTED_100baseT_Full -+ | SUPPORTED_1000baseT_Half -+ | SUPPORTED_1000baseT_Full -+ | SUPPORTED_Autoneg -+ | SUPPORTED_MII -+ | SUPPORTED_TP); -+ phydev->advertising = phydev->supported; -+ port->phydev = phydev; -+ -+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n", -+ dev->name, phydev->drv->name, -+ dev_name(&phydev->dev), phydev->irq); -+ -+#ifdef SW_POLLING -+ phy_read_status(phydev); -+ -+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000); -+ val |= ADVERTIZE_MPD; -+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val); -+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040); -+ -+ phy_start_aneg(phydev); -+#endif -+ return 0; -+} -+ -+static void xrx200_port_config(struct xrx200_priv *priv, -+ const struct xrx200_port *port) -+{ -+ u16 miimode = 0; -+ -+ switch (port->num) { -+ case 0: /* xMII0 */ -+ case 1: /* xMII1 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ if (port->flags & XRX200_PORT_TYPE_PHY) -+ /* MII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ else -+ /* MII PHY mode, connected to external MAC */ -+ miimode = MII_CFG_MODE_MIIP; -+ break; -+ case PHY_INTERFACE_MODE_RMII: -+ if (port->flags & XRX200_PORT_TYPE_PHY) -+ /* RMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RMIIM; -+ else -+ /* RMII PHY mode, connected to external MAC */ -+ miimode = MII_CFG_MODE_RMIIP; -+ break; -+ case PHY_INTERFACE_MODE_RGMII: -+ /* RGMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RGMII; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 2: /* internal GPHY0 */ -+ case 3: /* internal GPHY0 */ -+ case 4: /* internal GPHY1 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ case PHY_INTERFACE_MODE_GMII: -+ /* MII MAC mode, connected to internal GPHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 5: /* internal GPHY1 or xMII2 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ /* MII MAC mode, connected to internal GPHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ break; -+ case PHY_INTERFACE_MODE_RGMII: -+ /* RGMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RGMII; -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN, -+ MII_CFG(port->num)); -+} -+ -+static int xrx200_init(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct sockaddr mac; -+ int err, i; -+ -+#ifndef SW_POLLING -+ unsigned int reg = 0; -+ -+ /* enable auto polling */ -+ for (i = 0; i < priv->num_port; i++) -+ reg |= BIT(priv->port[i].num); -+ ltq_mdio_w32(reg, MDIO_CLK_CFG0); -+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1); -+#endif -+ -+ /* setup each port */ -+ for (i = 0; i < priv->num_port; i++) -+ xrx200_port_config(priv, &priv->port[i]); -+ -+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); -+ if (!is_valid_ether_addr(mac.sa_data)) { -+ pr_warn("net-xrx200: invalid MAC, using random\n"); -+ eth_random_addr(mac.sa_data); -+ dev->addr_assign_type |= NET_ADDR_RANDOM; -+ } -+ -+ err = eth_mac_addr(dev, &mac); -+ if (err) -+ goto err_netdev; -+ -+ for (i = 0; i < priv->num_port; i++) -+ if (xrx200_mdio_probe(dev, &priv->port[i])) -+ pr_warn("xrx200-mdio: probing phy of port %d failed\n", -+ priv->port[i].num); -+ -+ return 0; -+ -+err_netdev: -+ unregister_netdev(dev); -+ free_netdev(dev); -+ return err; -+} -+ -+static void xrx200_pci_microcode(void) -+{ -+ int i; -+ -+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK, -+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL); -+ ltq_switch_w32(0, PCE_TBL_MASK); -+ -+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) { -+ ltq_switch_w32(i, PCE_TBL_ADDR); -+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0)); -+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1)); -+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2)); -+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3)); -+ -+ // start the table access: -+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL); -+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY); -+ } -+ -+ /* tell the switch that the microcode is loaded */ -+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0)); -+} -+ -+static void xrx200_hw_init(struct xrx200_hw *hw) -+{ -+ int i; -+ -+ /* enable clock gate */ -+ clk_enable(hw->clk); -+ -+ ltq_switch_w32(1, 0); -+ mdelay(100); -+ ltq_switch_w32(0, 0); -+ /* -+ * TODO: we should really disbale all phys/miis here and explicitly -+ * enable them in the device secific init function -+ */ -+ -+ /* disable port fetch/store dma */ -+ for (i = 0; i < 7; i++ ) { -+ ltq_switch_w32(0, FDMA_PCTRLx(i)); -+ ltq_switch_w32(0, SDMA_PCTRLx(i)); -+ } -+ -+ /* enable Switch */ -+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB); -+ -+ /* load the pce microcode */ -+ xrx200_pci_microcode(); -+ -+ /* Default unknown Broadcat/Multicast/Unicast port maps */ -+ ltq_switch_w32(0x7f, PCE_PMAP1); -+ ltq_switch_w32(0x7f, PCE_PMAP2); -+ ltq_switch_w32(0x7f, PCE_PMAP3); -+ -+ /* RMON Counter Enable for all physical ports */ -+ for (i = 0; i < 7; i++) -+ ltq_switch_w32(0x1, BM_PCFG(i)); -+ -+ /* disable auto polling */ -+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0); -+ -+ /* enable port statistic counters */ -+ for (i = 0; i < 7; i++) -+ ltq_switch_w32(0x1, BM_PCFGx(i)); -+ -+ /* set IPG to 12 */ -+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG); -+ -+#ifdef SW_ROUTING -+ /* enable status header, enable CRC */ -+ ltq_pmac_w32_mask(0, -+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC, -+ PMAC_HD_CTL); -+#else -+ /* disable status header, enable CRC */ -+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS, -+ PMAC_HD_CTL_AC, -+ PMAC_HD_CTL); -+#endif -+ -+ /* enable port fetch/store dma */ -+ for (i = 0; i < 7; i++ ) { -+ ltq_switch_w32_mask(0, 0x01, FDMA_PCTRLx(i)); -+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i)); -+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0)); -+ } -+ -+ /* enable special tag insertion on cpu port */ -+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6)); -+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0)); -+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2)); -+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG); -+} -+ -+static void xrx200_hw_cleanup(struct xrx200_hw *hw) -+{ -+ int i; -+ -+ /* disable the switch */ -+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB); -+ -+ /* free the channels and IRQs */ -+ for (i = 0; i < 2; i++) { -+ ltq_dma_free(&hw->chan[i].dma); -+ if (hw->chan[i].dma.irq) -+ free_irq(hw->chan[i].dma.irq, hw); -+ } -+ -+ /* free the allocated RX ring */ -+ for (i = 0; i < LTQ_DESC_NUM; i++) -+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]); -+ -+ /* clear the mdio bus */ -+ mdiobus_unregister(hw->mii_bus); -+ mdiobus_free(hw->mii_bus); -+ -+ /* release the clock */ -+ clk_disable(hw->clk); -+ clk_put(hw->clk); -+} -+ -+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np) -+{ -+ int i; -+ hw->mii_bus = mdiobus_alloc(); -+ if (!hw->mii_bus) -+ return -ENOMEM; -+ -+ hw->mii_bus->read = xrx200_mdio_rd; -+ hw->mii_bus->write = xrx200_mdio_wr; -+ hw->mii_bus->name = "lantiq,xrx200-mdio"; -+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0); -+ -+ if (of_mdiobus_register(hw->mii_bus, np)) { -+ mdiobus_free(hw->mii_bus); -+ return -ENXIO; -+ } -+ -+ return 0; -+} -+ -+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port) -+{ -+ const __be32 *addr, *id = of_get_property(port, "reg", NULL); -+ struct xrx200_port *p = &priv->port[priv->num_port]; -+ -+ if (!id) -+ return; -+ -+ memset(p, 0, sizeof(struct xrx200_port)); -+ p->phy_node = of_parse_phandle(port, "phy-handle", 0); -+ addr = of_get_property(p->phy_node, "reg", NULL); -+ if (!addr) -+ return; -+ -+ p->num = *id; -+ p->phy_addr = *addr; -+ p->phy_if = of_get_phy_mode(port); -+ if (p->phy_addr > 0x10) -+ p->flags = XRX200_PORT_TYPE_MAC; -+ else -+ p->flags = XRX200_PORT_TYPE_PHY; -+ priv->num_port++; -+ -+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags); -+ if (gpio_is_valid(p->gpio)) -+ if (!gpio_request(p->gpio, "phy-reset")) { -+ gpio_direction_output(p->gpio, -+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0)); -+ udelay(100); -+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); -+ } -+ /* is this port a wan port ? */ -+ if (priv->wan) -+ priv->hw->wan_map |= BIT(p->num); -+ -+ priv->port_map |= BIT(p->num); -+ -+ /* store the port id in the hw struct so we can map ports -> devices */ -+ priv->hw->port_map[p->num] = priv->hw->num_devs; -+} -+ -+static const struct net_device_ops xrx200_netdev_ops = { -+ .ndo_init = xrx200_init, -+ .ndo_open = xrx200_open, -+ .ndo_stop = xrx200_close, -+ .ndo_start_xmit = xrx200_start_xmit, -+ .ndo_set_mac_address = eth_mac_addr, -+ .ndo_validate_addr = eth_validate_addr, -+ .ndo_change_mtu = eth_change_mtu, -+ .ndo_get_stats = xrx200_get_stats, -+ .ndo_tx_timeout = xrx200_tx_timeout, -+}; -+ -+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface) -+{ -+ struct xrx200_priv *priv; -+ struct device_node *port; -+ const __be32 *wan; -+ -+ /* alloc the network device */ -+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv)); -+ if (!hw->devs[hw->num_devs]) -+ return; -+ -+ /* setup the network device */ -+ strcpy(hw->devs[hw->num_devs]->name, "eth%d"); -+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops; -+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT; -+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM; -+ -+ /* setup our private data */ -+ priv = netdev_priv(hw->devs[hw->num_devs]); -+ priv->hw = hw; -+ priv->mac = of_get_mac_address(iface); -+ priv->id = hw->num_devs; -+ -+ /* is this the wan interface ? */ -+ wan = of_get_property(iface, "lantiq,wan", NULL); -+ if (wan && (*wan == 1)) -+ priv->wan = 1; -+ -+ /* load the ports that are part of the interface */ -+ for_each_child_of_node(iface, port) -+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port")) -+ xrx200_of_port(priv, port); -+ -+ /* register the actual device */ -+ if (!register_netdev(hw->devs[hw->num_devs])) -+ hw->num_devs++; -+} -+ -+static struct xrx200_hw xrx200_hw; -+ -+static int __devinit xrx200_probe(struct platform_device *pdev) -+{ -+ struct resource *res[4]; -+ struct device_node *mdio_np, *iface_np; -+ int i; -+ -+ /* load the memory ranges */ -+ for (i = 0; i < 4; i++) { -+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i); -+ if (!res[i]) { -+ dev_err(&pdev->dev, "failed to get resources\n"); -+ return -ENOENT; -+ } -+ } -+ xrx200_switch_membase = devm_request_and_ioremap(&pdev->dev, res[0]); -+ xrx200_mdio_membase = devm_request_and_ioremap(&pdev->dev, res[1]); -+ xrx200_mii_membase = devm_request_and_ioremap(&pdev->dev, res[2]); -+ xrx200_pmac_membase = devm_request_and_ioremap(&pdev->dev, res[3]); -+ if (!xrx200_switch_membase || !xrx200_mdio_membase || -+ !xrx200_mii_membase || !xrx200_pmac_membase) { -+ dev_err(&pdev->dev, "failed to request and remap io ranges \n"); -+ return -ENOMEM; -+ } -+ -+ /* get the clock */ -+ xrx200_hw.clk = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(xrx200_hw.clk)) { -+ dev_err(&pdev->dev, "failed to get clock\n"); -+ return PTR_ERR(xrx200_hw.clk); -+ } -+ -+ /* bring up the dma engine and IP core */ -+ spin_lock_init(&xrx200_hw.lock); -+ xrx200_dma_init(&xrx200_hw); -+ xrx200_hw_init(&xrx200_hw); -+ -+ /* bring up the mdio bus */ -+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL, -+ "lantiq,xrx200-mdio"); -+ if (mdio_np) -+ if (xrx200_of_mdio(&xrx200_hw, mdio_np)) -+ dev_err(&pdev->dev, "mdio probe failed\n"); -+ -+ /* load the interfaces */ -+ for_each_child_of_node(pdev->dev.of_node, iface_np) -+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) { -+ if (xrx200_hw.num_devs < XRX200_MAX_DEV) -+ xrx200_of_iface(&xrx200_hw, iface_np); -+ else -+ dev_err(&pdev->dev, -+ "only %d interfaces allowed\n", -+ XRX200_MAX_DEV); -+ } -+ -+ if (!xrx200_hw.num_devs) { -+ xrx200_hw_cleanup(&xrx200_hw); -+ dev_err(&pdev->dev, "failed to load interfaces\n"); -+ return -ENOENT; -+ } -+ -+ /* set wan port mask */ -+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN); -+ -+ for (i = 0; i < xrx200_hw.num_devs; i++) { -+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i]; -+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i]; -+ } -+ -+ /* setup NAPI */ -+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev); -+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_TX].dummy_dev); -+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev, -+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32); -+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_TX].dummy_dev, -+ &xrx200_hw.chan[XRX200_DMA_TX].napi, xrx200_poll_tx, 8); -+ -+ platform_set_drvdata(pdev, &xrx200_hw); -+ -+ return 0; -+} -+ -+static int __devexit xrx200_remove(struct platform_device *pdev) -+{ -+ struct net_device *dev = platform_get_drvdata(pdev); -+ struct xrx200_priv *priv; -+ -+ if (!dev) -+ return 0; -+ -+ priv = netdev_priv(dev); -+ -+ /* free stack related instances */ -+ netif_stop_queue(dev); -+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi); -+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_TX].napi); -+ -+ /* shut down hardware */ -+ xrx200_hw_cleanup(&xrx200_hw); -+ -+ /* remove the actual device */ -+ unregister_netdev(dev); -+ free_netdev(dev); -+ -+ return 0; -+} -+ -+static const struct of_device_id xrx200_match[] = { -+ { .compatible = "lantiq,xrx200-net" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, xrx200_match); -+ -+static struct platform_driver xrx200_driver = { -+ .probe = xrx200_probe, -+ .remove = __devexit_p(xrx200_remove), -+ .driver = { -+ .name = "lantiq,xrx200-net", -+ .of_match_table = xrx200_match, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+module_platform_driver(xrx200_driver); -+ -+MODULE_AUTHOR("John Crispin "); -+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/patches-3.7/0118-owrt-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-3.7/0118-owrt-adds-PHY11G-firmware-blobs.patch deleted file mode 100644 index 2bae7b3594..0000000000 --- a/target/linux/lantiq/patches-3.7/0118-owrt-adds-PHY11G-firmware-blobs.patch +++ /dev/null @@ -1,370 +0,0 @@ -From 870dad40d334e9e8342f28dbcad1410cad12a945 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 22 Oct 2012 09:26:24 +0200 -Subject: [PATCH 118/123] owrt: adds PHY11G firmware blobs - -Signed-off-by: John Crispin ---- - firmware/Makefile | 1 + - firmware/lantiq/COPYING | 286 ++++++++++++++++++++++++++++++++++++ - firmware/lantiq/README | 45 ++++++ - firmware/lantiq/vr9_phy11g_a1x.bin | Bin 0 -> 65536 bytes - firmware/lantiq/vr9_phy11g_a2x.bin | Bin 0 -> 65536 bytes - firmware/lantiq/vr9_phy22f_a1x.bin | Bin 0 -> 65536 bytes - firmware/lantiq/vr9_phy22f_a2x.bin | Bin 0 -> 65536 bytes - 7 files changed, 332 insertions(+) - create mode 100644 firmware/lantiq/COPYING - create mode 100644 firmware/lantiq/README - create mode 100644 firmware/lantiq/vr9_phy11g_a1x.bin - create mode 100644 firmware/lantiq/vr9_phy11g_a2x.bin - create mode 100644 firmware/lantiq/vr9_phy22f_a1x.bin - create mode 100644 firmware/lantiq/vr9_phy22f_a2x.bin - ---- a/firmware/Makefile -+++ b/firmware/Makefile -@@ -135,6 +135,8 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P - fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw - fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw - fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin -+fw-shipped-$(CONFIG_SOC_TYPE_XWAY) += lantiq/vr9_phy11g_a1x.bin -+fw-shipped-$(CONFIG_SOC_TYPE_XWAY) += lantiq/vr9_phy11g_a2x.bin - fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin - - fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) ---- /dev/null -+++ b/firmware/lantiq/COPYING -@@ -0,0 +1,286 @@ -+All firmware files are copyrighted by Lantiq Deutschland GmbH. -+The files have been extracted from header files found in Lantiq BSPs. -+If not stated otherwise all files are licensed under GPL. -+ -+======================================================================= -+ -+ GNU GENERAL PUBLIC LICENSE -+ Version 2, June 1991 -+ -+ Copyright (C) 1989, 1991 Free Software Foundation, Inc. -+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ Everyone is permitted to copy and distribute verbatim copies -+ of this license document, but changing it is not allowed. -+ -+ Preamble -+ -+ The licenses for most software are designed to take away your -+freedom to share and change it. By contrast, the GNU General Public -+License is intended to guarantee your freedom to share and change free -+software--to make sure the software is free for all its users. This -+General Public License applies to most of the Free Software -+Foundation's software and to any other program whose authors commit to -+using it. (Some other Free Software Foundation software is covered by -+the GNU Library General Public License instead.) You can apply it to -+your programs, too. -+ -+ When we speak of free software, we are referring to freedom, not -+price. Our General Public Licenses are designed to make sure that you -+have the freedom to distribute copies of free software (and charge for -+this service if you wish), that you receive source code or can get it -+if you want it, that you can change the software or use pieces of it -+in new free programs; and that you know you can do these things. -+ -+ To protect your rights, we need to make restrictions that forbid -+anyone to deny you these rights or to ask you to surrender the rights. -+These restrictions translate to certain responsibilities for you if you -+distribute copies of the software, or if you modify it. -+ -+ For example, if you distribute copies of such a program, whether -+gratis or for a fee, you must give the recipients all the rights that -+you have. You must make sure that they, too, receive or can get the -+source code. And you must show them these terms so they know their -+rights. -+ -+ We protect your rights with two steps: (1) copyright the software, and -+(2) offer you this license which gives you legal permission to copy, -+distribute and/or modify the software. -+ -+ Also, for each author's protection and ours, we want to make certain -+that everyone understands that there is no warranty for this free -+software. If the software is modified by someone else and passed on, we -+want its recipients to know that what they have is not the original, so -+that any problems introduced by others will not reflect on the original -+authors' reputations. -+ -+ Finally, any free program is threatened constantly by software -+patents. We wish to avoid the danger that redistributors of a free -+program will individually obtain patent licenses, in effect making the -+program proprietary. To prevent this, we have made it clear that any -+patent must be licensed for everyone's free use or not licensed at all. -+ -+ The precise terms and conditions for copying, distribution and -+modification follow. -+ -+ GNU GENERAL PUBLIC LICENSE -+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION -+ -+ 0. This License applies to any program or other work which contains -+a notice placed by the copyright holder saying it may be distributed -+under the terms of this General Public License. The "Program", below, -+refers to any such program or work, and a "work based on the Program" -+means either the Program or any derivative work under copyright law: -+that is to say, a work containing the Program or a portion of it, -+either verbatim or with modifications and/or translated into another -+language. (Hereinafter, translation is included without limitation in -+the term "modification".) Each licensee is addressed as "you". -+ -+Activities other than copying, distribution and modification are not -+covered by this License; they are outside its scope. The act of -+running the Program is not restricted, and the output from the Program -+is covered only if its contents constitute a work based on the -+Program (independent of having been made by running the Program). -+Whether that is true depends on what the Program does. -+ -+ 1. You may copy and distribute verbatim copies of the Program's -+source code as you receive it, in any medium, provided that you -+conspicuously and appropriately publish on each copy an appropriate -+copyright notice and disclaimer of warranty; keep intact all the -+notices that refer to this License and to the absence of any warranty; -+and give any other recipients of the Program a copy of this License -+along with the Program. -+ -+You may charge a fee for the physical act of transferring a copy, and -+you may at your option offer warranty protection in exchange for a fee. -+ -+ 2. You may modify your copy or copies of the Program or any portion -+of it, thus forming a work based on the Program, and copy and -+distribute such modifications or work under the terms of Section 1 -+above, provided that you also meet all of these conditions: -+ -+ a) You must cause the modified files to carry prominent notices -+ stating that you changed the files and the date of any change. -+ -+ b) You must cause any work that you distribute or publish, that in -+ whole or in part contains or is derived from the Program or any -+ part thereof, to be licensed as a whole at no charge to all third -+ parties under the terms of this License. -+ -+ c) If the modified program normally reads commands interactively -+ when run, you must cause it, when started running for such -+ interactive use in the most ordinary way, to print or display an -+ announcement including an appropriate copyright notice and a -+ notice that there is no warranty (or else, saying that you provide -+ a warranty) and that users may redistribute the program under -+ these conditions, and telling the user how to view a copy of this -+ License. (Exception: if the Program itself is interactive but -+ does not normally print such an announcement, your work based on -+ the Program is not required to print an announcement.) -+ -+These requirements apply to the modified work as a whole. If -+identifiable sections of that work are not derived from the Program, -+and can be reasonably considered independent and separate works in -+themselves, then this License, and its terms, do not apply to those -+sections when you distribute them as separate works. But when you -+distribute the same sections as part of a whole which is a work based -+on the Program, the distribution of the whole must be on the terms of -+this License, whose permissions for other licensees extend to the -+entire whole, and thus to each and every part regardless of who wrote it. -+ -+Thus, it is not the intent of this section to claim rights or contest -+your rights to work written entirely by you; rather, the intent is to -+exercise the right to control the distribution of derivative or -+collective works based on the Program. -+ -+In addition, mere aggregation of another work not based on the Program -+with the Program (or with a work based on the Program) on a volume of -+a storage or distribution medium does not bring the other work under -+the scope of this License. -+ -+ 3. You may copy and distribute the Program (or a work based on it, -+under Section 2) in object code or executable form under the terms of -+Sections 1 and 2 above provided that you also do one of the following: -+ -+ a) Accompany it with the complete corresponding machine-readable -+ source code, which must be distributed under the terms of Sections -+ 1 and 2 above on a medium customarily used for software interchange; or, -+ -+ b) Accompany it with a written offer, valid for at least three -+ years, to give any third party, for a charge no more than your -+ cost of physically performing source distribution, a complete -+ machine-readable copy of the corresponding source code, to be -+ distributed under the terms of Sections 1 and 2 above on a medium -+ customarily used for software interchange; or, -+ -+ c) Accompany it with the information you received as to the offer -+ to distribute corresponding source code. (This alternative is -+ allowed only for noncommercial distribution and only if you -+ received the program in object code or executable form with such -+ an offer, in accord with Subsection b above.) -+ -+The source code for a work means the preferred form of the work for -+making modifications to it. For an executable work, complete source -+code means all the source code for all modules it contains, plus any -+associated interface definition files, plus the scripts used to -+control compilation and installation of the executable. However, as a -+special exception, the source code distributed need not include -+anything that is normally distributed (in either source or binary -+form) with the major components (compiler, kernel, and so on) of the -+operating system on which the executable runs, unless that component -+itself accompanies the executable. -+ -+If distribution of executable or object code is made by offering -+access to copy from a designated place, then offering equivalent -+access to copy the source code from the same place counts as -+distribution of the source code, even though third parties are not -+compelled to copy the source along with the object code. -+ -+ 4. You may not copy, modify, sublicense, or distribute the Program -+except as expressly provided under this License. Any attempt -+otherwise to copy, modify, sublicense or distribute the Program is -+void, and will automatically terminate your rights under this License. -+However, parties who have received copies, or rights, from you under -+this License will not have their licenses terminated so long as such -+parties remain in full compliance. -+ -+ 5. You are not required to accept this License, since you have not -+signed it. However, nothing else grants you permission to modify or -+distribute the Program or its derivative works. These actions are -+prohibited by law if you do not accept this License. Therefore, by -+modifying or distributing the Program (or any work based on the -+Program), you indicate your acceptance of this License to do so, and -+all its terms and conditions for copying, distributing or modifying -+the Program or works based on it. -+ -+ 6. Each time you redistribute the Program (or any work based on the -+Program), the recipient automatically receives a license from the -+original licensor to copy, distribute or modify the Program subject to -+these terms and conditions. You may not impose any further -+restrictions on the recipients' exercise of the rights granted herein. -+You are not responsible for enforcing compliance by third parties to -+this License. -+ -+ 7. If, as a consequence of a court judgment or allegation of patent -+infringement or for any other reason (not limited to patent issues), -+conditions are imposed on you (whether by court order, agreement or -+otherwise) that contradict the conditions of this License, they do not -+excuse you from the conditions of this License. If you cannot -+distribute so as to satisfy simultaneously your obligations under this -+License and any other pertinent obligations, then as a consequence you -+may not distribute the Program at all. For example, if a patent -+license would not permit royalty-free redistribution of the Program by -+all those who receive copies directly or indirectly through you, then -+the only way you could satisfy both it and this License would be to -+refrain entirely from distribution of the Program. -+ -+If any portion of this section is held invalid or unenforceable under -+any particular circumstance, the balance of the section is intended to -+apply and the section as a whole is intended to apply in other -+circumstances. -+ -+It is not the purpose of this section to induce you to infringe any -+patents or other property right claims or to contest validity of any -+such claims; this section has the sole purpose of protecting the -+integrity of the free software distribution system, which is -+implemented by public license practices. Many people have made -+generous contributions to the wide range of software distributed -+through that system in reliance on consistent application of that -+system; it is up to the author/donor to decide if he or she is willing -+to distribute software through any other system and a licensee cannot -+impose that choice. -+ -+This section is intended to make thoroughly clear what is believed to -+be a consequence of the rest of this License. -+ -+ 8. If the distribution and/or use of the Program is restricted in -+certain countries either by patents or by copyrighted interfaces, the -+original copyright holder who places the Program under this License -+may add an explicit geographical distribution limitation excluding -+those countries, so that distribution is permitted only in or among -+countries not thus excluded. In such case, this License incorporates -+the limitation as if written in the body of this License. -+ -+ 9. The Free Software Foundation may publish revised and/or new versions -+of the General Public License from time to time. Such new versions will -+be similar in spirit to the present version, but may differ in detail to -+address new problems or concerns. -+ -+Each version is given a distinguishing version number. If the Program -+specifies a version number of this License which applies to it and "any -+later version", you have the option of following the terms and conditions -+either of that version or of any later version published by the Free -+Software Foundation. If the Program does not specify a version number of -+this License, you may choose any version ever published by the Free Software -+Foundation. -+ -+ 10. If you wish to incorporate parts of the Program into other free -+programs whose distribution conditions are different, write to the author -+to ask for permission. For software which is copyrighted by the Free -+Software Foundation, write to the Free Software Foundation; we sometimes -+make exceptions for this. Our decision will be guided by the two goals -+of preserving the free status of all derivatives of our free software and -+of promoting the sharing and reuse of software generally. -+ -+ NO WARRANTY -+ -+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -+REPAIR OR CORRECTION. -+ -+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -+POSSIBILITY OF SUCH DAMAGES. -+ -+ END OF TERMS AND CONDITIONS ---- /dev/null -+++ b/firmware/lantiq/README -@@ -0,0 +1,45 @@ -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+# (C) Copyright 2007 - 2012 -+# Lantiq Deutschland GmbH -+# -+# (C) Copyright 2012 -+# Daniel Schwierzeck -+# -+ -+# -+# How to use -+# -+Configure kernel with: -+CONFIG_FW_LOADER=y -+CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR" -+CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES" -+ -+where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list -+of space separated files from list below. -+ -+# -+# Firmware files -+# -+ -+# GPHY core on Lantiq XWAY VR9 v1.1 -+lantiq/vr9_phy11g_a1x.bin -+lantiq/vr9_phy22f_a1x.bin -+ -+# GPHY core on Lantiq XWAY VR9 v1.1 -+lantiq/vr9_phy11g_a2x.bin -+lantiq/vr9_phy22f_a2x.bin diff --git a/target/linux/lantiq/patches-3.7/0119-owrt-ATM-adds-lantiq-specific-hacks.patch b/target/linux/lantiq/patches-3.7/0119-owrt-ATM-adds-lantiq-specific-hacks.patch deleted file mode 100644 index f3a2c31271..0000000000 --- a/target/linux/lantiq/patches-3.7/0119-owrt-ATM-adds-lantiq-specific-hacks.patch +++ /dev/null @@ -1,494 +0,0 @@ -From 8d2a7d1fb561c9cb098c2b13ded34fe0f49dcca5 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 3 Aug 2012 10:27:25 +0200 -Subject: [PATCH 20/25] owrt atm - ---- - arch/mips/lantiq/irq.c | 2 ++ - arch/mips/mm/cache.c | 2 ++ - net/atm/common.c | 6 ++++++ - net/atm/proc.c | 2 +- - 4 files changed, 11 insertions(+), 1 deletions(-) - ---- a/arch/mips/lantiq/irq.c -+++ b/arch/mips/lantiq/irq.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -99,6 +100,7 @@ void ltq_mask_and_ack_irq(struct irq_dat - ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier); - ltq_icu_w32(im, BIT(offset), isr); - } -+EXPORT_SYMBOL(ltq_mask_and_ack_irq); - - static void ltq_ack_irq(struct irq_data *d) - { ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -58,6 +58,8 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_wback); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT */ - ---- a/net/atm/common.c -+++ b/net/atm/common.c -@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc - write_unlock_irq(&vcc_sklist_lock); - } - -+struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL; -+EXPORT_SYMBOL(ifx_atm_alloc_tx); -+ - static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size) - { - struct sk_buff *skb; - struct sock *sk = sk_atm(vcc); - -+ if (ifx_atm_alloc_tx != NULL) -+ return ifx_atm_alloc_tx(vcc, size); -+ - if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) { - pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n", - sk_wmem_alloc_get(sk), size, sk->sk_sndbuf); ---- a/net/atm/proc.c -+++ b/net/atm/proc.c -@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil - static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc) - { - static const char *const class_name[] = { -- "off", "UBR", "CBR", "VBR", "ABR"}; -+ "off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"}; - static const char *const aal_name[] = { - "---", "1", "2", "3/4", /* 0- 3 */ - "???", "5", "???", "???", /* 4- 7 */ ---- /dev/null -+++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h -@@ -0,0 +1,196 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifx_atm.h -+** PROJECT : UEIP -+** MODULES : ATM -+** -+** DATE : 17 Jun 2009 -+** AUTHOR : Xu Liang -+** DESCRIPTION : Global ATM driver header file -+** COPYRIGHT : Copyright (c) 2006 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** HISTORY -+** $Date $Author $Comment -+** 07 JUL 2009 Xu Liang Init Version -+*******************************************************************************/ -+ -+#ifndef IFX_ATM_H -+#define IFX_ATM_H -+ -+ -+ -+/*! -+ \defgroup IFX_ATM UEIP Project - ATM driver module -+ \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9. -+ */ -+ -+/*! -+ \defgroup IFX_ATM_IOCTL IOCTL Commands -+ \ingroup IFX_ATM -+ \brief IOCTL Commands used by user application. -+ */ -+ -+/*! -+ \defgroup IFX_ATM_STRUCT Structures -+ \ingroup IFX_ATM -+ \brief Structures used by user application. -+ */ -+ -+/*! -+ \file ifx_atm.h -+ \ingroup IFX_ATM -+ \brief ATM driver header file -+ */ -+ -+ -+ -+/* -+ * #################################### -+ * Definition -+ * #################################### -+ */ -+ -+/*! -+ \addtogroup IFX_ATM_STRUCT -+ */ -+/*@{*/ -+ -+/* -+ * ATM MIB -+ */ -+ -+/*! -+ \struct atm_cell_ifEntry_t -+ \brief Structure used for Cell Level MIB Counters. -+ -+ User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL". -+ */ -+typedef struct { -+ __u32 ifHCInOctets_h; /*!< byte counter of ingress cells (upper 32 bits, total 64 bits) */ -+ __u32 ifHCInOctets_l; /*!< byte counter of ingress cells (lower 32 bits, total 64 bits) */ -+ __u32 ifHCOutOctets_h; /*!< byte counter of egress cells (upper 32 bits, total 64 bits) */ -+ __u32 ifHCOutOctets_l; /*!< byte counter of egress cells (lower 32 bits, total 64 bits) */ -+ __u32 ifInErrors; /*!< counter of error ingress cells */ -+ __u32 ifInUnknownProtos; /*!< counter of unknown ingress cells */ -+ __u32 ifOutErrors; /*!< counter of error egress cells */ -+} atm_cell_ifEntry_t; -+ -+/*! -+ \struct atm_aal5_ifEntry_t -+ \brief Structure used for AAL5 Frame Level MIB Counters. -+ -+ User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5". -+ */ -+typedef struct { -+ __u32 ifHCInOctets_h; /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */ -+ __u32 ifHCInOctets_l; /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */ -+ __u32 ifHCOutOctets_h; /*!< byte counter of egress packets (upper 32 bits, total 64 bits) */ -+ __u32 ifHCOutOctets_l; /*!< byte counter of egress packets (lower 32 bits, total 64 bits) */ -+ __u32 ifInUcastPkts; /*!< counter of ingress packets */ -+ __u32 ifOutUcastPkts; /*!< counter of egress packets */ -+ __u32 ifInErrors; /*!< counter of error ingress packets */ -+ __u32 ifInDiscards; /*!< counter of dropped ingress packets */ -+ __u32 ifOutErros; /*!< counter of error egress packets */ -+ __u32 ifOutDiscards; /*!< counter of dropped egress packets */ -+} atm_aal5_ifEntry_t; -+ -+/*! -+ \struct atm_aal5_vcc_t -+ \brief Structure used for per PVC AAL5 Frame Level MIB Counters. -+ -+ This structure is a part of structure "atm_aal5_vcc_x_t". -+ */ -+typedef struct { -+ __u32 aal5VccCrcErrors; /*!< counter of ingress packets with CRC error */ -+ __u32 aal5VccSarTimeOuts; /*!< counter of ingress packets with Re-assemble timeout */ //no timer support yet -+ __u32 aal5VccOverSizedSDUs; /*!< counter of oversized ingress packets */ -+} atm_aal5_vcc_t; -+ -+/*! -+ \struct atm_aal5_vcc_x_t -+ \brief Structure used for per PVC AAL5 Frame Level MIB Counters. -+ -+ User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC". -+ */ -+typedef struct { -+ int vpi; /*!< VPI of the VCC to get MIB counters */ -+ int vci; /*!< VCI of the VCC to get MIB counters */ -+ atm_aal5_vcc_t mib_vcc; /*!< structure to get MIB counters */ -+} atm_aal5_vcc_x_t; -+ -+/*@}*/ -+ -+ -+ -+/* -+ * #################################### -+ * IOCTL -+ * #################################### -+ */ -+ -+/*! -+ \addtogroup IFX_ATM_IOCTL -+ */ -+/*@{*/ -+ -+/* -+ * ioctl Command -+ */ -+/*! -+ \brief ATM IOCTL Magic Number -+ */ -+#define PPE_ATM_IOC_MAGIC 'o' -+/*! -+ \brief ATM IOCTL Command - Get Cell Level MIB Counters -+ -+ This command is obsolete. User can get cell level MIB from DSL API. -+ This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters. -+ */ -+#define PPE_ATM_MIB_CELL _IOW(PPE_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t) -+/*! -+ \brief ATM IOCTL Command - Get AAL5 Level MIB Counters -+ -+ Get AAL5 packet counters. -+ This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters. -+ */ -+#define PPE_ATM_MIB_AAL5 _IOW(PPE_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t) -+/*! -+ \brief ATM IOCTL Command - Get Per PVC MIB Counters -+ -+ Get AAL5 packet counters for each PVC. -+ This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters. -+ */ -+#define PPE_ATM_MIB_VCC _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t) -+/*! -+ \brief Total Number of ATM IOCTL Commands -+ */ -+#define PPE_ATM_IOC_MAXNR 3 -+ -+/*@}*/ -+ -+ -+ -+/* -+ * #################################### -+ * API -+ * #################################### -+ */ -+ -+#ifdef __KERNEL__ -+struct port_cell_info { -+ unsigned int port_num; -+ unsigned int tx_link_rate[2]; -+}; -+#endif -+ -+ -+ -+#endif // IFX_ATM_H -+ ---- /dev/null -+++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h -@@ -0,0 +1,203 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifx_ptm.h -+** PROJECT : UEIP -+** MODULES : PTM -+** -+** DATE : 17 Jun 2009 -+** AUTHOR : Xu Liang -+** DESCRIPTION : Global PTM driver header file -+** COPYRIGHT : Copyright (c) 2006 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** HISTORY -+** $Date $Author $Comment -+** 07 JUL 2009 Xu Liang Init Version -+*******************************************************************************/ -+ -+#ifndef IFX_PTM_H -+#define IFX_PTM_H -+ -+ -+ -+/*! -+ \defgroup IFX_PTM UEIP Project - PTM driver module -+ \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9. -+ */ -+ -+/*! -+ \defgroup IFX_PTM_IOCTL IOCTL Commands -+ \ingroup IFX_PTM -+ \brief IOCTL Commands used by user application. -+ */ -+ -+/*! -+ \defgroup IFX_PTM_STRUCT Structures -+ \ingroup IFX_PTM -+ \brief Structures used by user application. -+ */ -+ -+/*! -+ \file ifx_ptm.h -+ \ingroup IFX_PTM -+ \brief PTM driver header file -+ */ -+ -+ -+ -+/* -+ * #################################### -+ * Definition -+ * #################################### -+ */ -+ -+ -+ -+/* -+ * #################################### -+ * IOCTL -+ * #################################### -+ */ -+ -+/*! -+ \addtogroup IFX_PTM_IOCTL -+ */ -+/*@{*/ -+ -+/* -+ * ioctl Command -+ */ -+/*! -+ \brief PTM IOCTL Command - Get codeword MIB counters. -+ -+ This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters. -+ */ -+#define IFX_PTM_MIB_CW_GET SIOCDEVPRIVATE + 1 -+/*! -+ \brief PTM IOCTL Command - Get packet MIB counters. -+ -+ This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters. -+ */ -+#define IFX_PTM_MIB_FRAME_GET SIOCDEVPRIVATE + 2 -+/*! -+ \brief PTM IOCTL Command - Get firmware configuration (CRC). -+ -+ This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC). -+ */ -+#define IFX_PTM_CFG_GET SIOCDEVPRIVATE + 3 -+/*! -+ \brief PTM IOCTL Command - Set firmware configuration (CRC). -+ -+ This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC). -+ */ -+#define IFX_PTM_CFG_SET SIOCDEVPRIVATE + 4 -+/*! -+ \brief PTM IOCTL Command - Program priority value to TX queue mapping. -+ -+ This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping. -+ */ -+#define IFX_PTM_MAP_PKT_PRIO_TO_Q SIOCDEVPRIVATE + 14 -+ -+/*@}*/ -+ -+ -+/*! -+ \addtogroup IFX_PTM_STRUCT -+ */ -+/*@{*/ -+ -+/* -+ * ioctl Data Type -+ */ -+ -+/*! -+ \typedef PTM_CW_IF_ENTRY_T -+ \brief Wrapping of structure "ptm_cw_ifEntry_t". -+ */ -+/*! -+ \struct ptm_cw_ifEntry_t -+ \brief Structure used for CodeWord level MIB counters. -+ */ -+typedef struct ptm_cw_ifEntry_t { -+ uint32_t ifRxNoIdleCodewords; /*!< output, number of ingress user codeword */ -+ uint32_t ifRxIdleCodewords; /*!< output, number of ingress idle codeword */ -+ uint32_t ifRxCodingViolation; /*!< output, number of error ingress codeword */ -+ uint32_t ifTxNoIdleCodewords; /*!< output, number of egress user codeword */ -+ uint32_t ifTxIdleCodewords; /*!< output, number of egress idle codeword */ -+} PTM_CW_IF_ENTRY_T; -+ -+/*! -+ \typedef PTM_FRAME_MIB_T -+ \brief Wrapping of structure "ptm_frame_mib_t". -+ */ -+/*! -+ \struct ptm_frame_mib_t -+ \brief Structure used for packet level MIB counters. -+ */ -+typedef struct ptm_frame_mib_t { -+ uint32_t RxCorrect; /*!< output, number of ingress packet */ -+ uint32_t TC_CrcError; /*!< output, number of egress packet with CRC error */ -+ uint32_t RxDropped; /*!< output, number of dropped ingress packet */ -+ uint32_t TxSend; /*!< output, number of egress packet */ -+} PTM_FRAME_MIB_T; -+ -+/*! -+ \typedef IFX_PTM_CFG_T -+ \brief Wrapping of structure "ptm_cfg_t". -+ */ -+/*! -+ \struct ptm_cfg_t -+ \brief Structure used for ETH/TC CRC configuration. -+ */ -+typedef struct ptm_cfg_t { -+ uint32_t RxEthCrcPresent; /*!< input/output, ingress packet has ETH CRC */ -+ uint32_t RxEthCrcCheck; /*!< input/output, check ETH CRC of ingress packet */ -+ uint32_t RxTcCrcCheck; /*!< input/output, check TC CRC of ingress codeword */ -+ uint32_t RxTcCrcLen; /*!< input/output, length of TC CRC of ingress codeword */ -+ uint32_t TxEthCrcGen; /*!< input/output, generate ETH CRC for egress packet */ -+ uint32_t TxTcCrcGen; /*!< input/output, generate TC CRC for egress codeword */ -+ uint32_t TxTcCrcLen; /*!< input/output, length of TC CRC of egress codeword */ -+} IFX_PTM_CFG_T; -+ -+/*! -+ \typedef IFX_PTM_PRIO_Q_MAP_T -+ \brief Wrapping of structure "ppe_prio_q_map". -+ */ -+/*! -+ \struct ppe_prio_q_map -+ \brief Structure used for Priority Value to TX Queue mapping. -+ */ -+typedef struct ppe_prio_q_map { -+ int pkt_prio; -+ int qid; -+ int vpi; // ignored in eth interface -+ int vci; // ignored in eth interface -+} IFX_PTM_PRIO_Q_MAP_T; -+ -+/*@}*/ -+ -+ -+ -+/* -+ * #################################### -+ * API -+ * #################################### -+ */ -+ -+#ifdef __KERNEL__ -+struct port_cell_info { -+ unsigned int port_num; -+ unsigned int tx_link_rate[2]; -+}; -+#endif -+ -+ -+ -+#endif // IFX_PTM_H -+ ---- a/include/uapi/linux/atm.h -+++ b/include/uapi/linux/atm.h -@@ -130,8 +130,14 @@ - #define ATM_ABR 4 - #define ATM_ANYCLASS 5 /* compatible with everything */ - -+#define ATM_VBR_NRT ATM_VBR -+#define ATM_VBR_RT 6 -+#define ATM_UBR_PLUS 7 -+#define ATM_GFR 8 -+ - #define ATM_MAX_PCR -1 /* maximum available PCR */ - -+ - struct atm_trafprm { - unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ - int max_pcr; /* maximum PCR in cells per second */ diff --git a/target/linux/lantiq/patches-3.7/0120-owrt-generic-dtb-image-hack.patch b/target/linux/lantiq/patches-3.7/0120-owrt-generic-dtb-image-hack.patch deleted file mode 100644 index 5a005729fe..0000000000 --- a/target/linux/lantiq/patches-3.7/0120-owrt-generic-dtb-image-hack.patch +++ /dev/null @@ -1,21 +0,0 @@ -From ac676d9516d9d14b98eef3dec05badae1d1a331a Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 2 Nov 2012 15:40:08 +0100 -Subject: [PATCH 120/123] owrt: generic dtb image hack - ---- - arch/mips/kernel/head.S | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/arch/mips/kernel/head.S -+++ b/arch/mips/kernel/head.S -@@ -147,6 +147,9 @@ EXPORT(__image_cmdline) - .fill 0x400 - #endif /* CONFIG_IMAGE_CMDLINE_HACK */ - -+ .ascii "OWRTDTB:" -+ EXPORT(__image_dtb) -+ .fill 0x4000 - __REF - - NESTED(kernel_entry, 16, sp) # kernel entry point diff --git a/target/linux/lantiq/patches-3.7/0121-owrt-lantiq-dtb-image-hack.patch b/target/linux/lantiq/patches-3.7/0121-owrt-lantiq-dtb-image-hack.patch deleted file mode 100644 index 981b86c2b4..0000000000 --- a/target/linux/lantiq/patches-3.7/0121-owrt-lantiq-dtb-image-hack.patch +++ /dev/null @@ -1,40 +0,0 @@ -From d8f83a608bc854dbbe6b2ea5436e9b34516af8e4 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 6 Dec 2012 16:09:08 +0100 -Subject: [PATCH 121/123] owrt: lantiq dtb image hack - ---- - arch/mips/lantiq/prom.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/arch/mips/lantiq/prom.c -+++ b/arch/mips/lantiq/prom.c -@@ -72,6 +72,8 @@ int __init early_init_dt_scan_model(unsi - return 0; - } - -+extern struct boot_param_header __image_dtb; -+ - void __init plat_mem_setup(void) - { - ioport_resource.start = IOPORT_RESOURCE_START; -@@ -85,7 +87,7 @@ void __init plat_mem_setup(void) - * Load the builtin devicetree. This causes the chosen node to be - * parsed resulting in our memory appearing - */ -- __dt_setup_arch(&__dtb_start); -+ __dt_setup_arch(&__image_dtb); - - of_scan_flat_dt(early_init_dt_scan_model, NULL); - } ---- a/arch/mips/lantiq/Makefile -+++ b/arch/mips/lantiq/Makefile -@@ -6,8 +6,6 @@ - - obj-y := irq.o clk.o prom.o - --obj-y += dts/ -- - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-$(CONFIG_SOC_TYPE_XWAY) += xway/ diff --git a/target/linux/lantiq/patches-3.7/0122-MIPS-lantiq-adds-pcie-driver.patch b/target/linux/lantiq/patches-3.7/0122-MIPS-lantiq-adds-pcie-driver.patch deleted file mode 100644 index 24f52bd101..0000000000 --- a/target/linux/lantiq/patches-3.7/0122-MIPS-lantiq-adds-pcie-driver.patch +++ /dev/null @@ -1,4734 +0,0 @@ -From b0b68cd5b5da72950863af882c368f28f65690e8 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 6 Dec 2012 11:43:53 +0100 -Subject: [PATCH 122/123] MIPS: lantiq: adds pcie driver - ---- - arch/mips/lantiq/Kconfig | 10 + - arch/mips/lantiq/xway/sysctrl.c | 2 + - arch/mips/pci/Makefile | 2 + - arch/mips/pci/fixup-lantiq-pcie.c | 82 ++ - arch/mips/pci/fixup-lantiq.c | 3 + - arch/mips/pci/ifxmips_pci_common.h | 57 ++ - arch/mips/pci/ifxmips_pcie.c | 1607 ++++++++++++++++++++++++++++++++++++ - arch/mips/pci/ifxmips_pcie.h | 135 +++ - arch/mips/pci/ifxmips_pcie_ar10.h | 290 +++++++ - arch/mips/pci/ifxmips_pcie_msi.c | 392 +++++++++ - arch/mips/pci/ifxmips_pcie_phy.c | 478 +++++++++++ - arch/mips/pci/ifxmips_pcie_pm.c | 176 ++++ - arch/mips/pci/ifxmips_pcie_pm.h | 36 + - arch/mips/pci/ifxmips_pcie_reg.h | 1001 ++++++++++++++++++++++ - arch/mips/pci/ifxmips_pcie_vr9.h | 271 ++++++ - arch/mips/pci/pci.c | 25 + - drivers/pci/pcie/aer/Kconfig | 2 +- - include/linux/pci.h | 2 + - include/linux/pci_ids.h | 6 + - 19 files changed, 4576 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c - create mode 100755 arch/mips/pci/ifxmips_pci_common.h - create mode 100644 arch/mips/pci/ifxmips_pcie.c - create mode 100644 arch/mips/pci/ifxmips_pcie.h - create mode 100644 arch/mips/pci/ifxmips_pcie_ar10.h - create mode 100644 arch/mips/pci/ifxmips_pcie_msi.c - create mode 100644 arch/mips/pci/ifxmips_pcie_phy.c - create mode 100644 arch/mips/pci/ifxmips_pcie_pm.c - create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h - create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h - create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h - ---- a/arch/mips/lantiq/Kconfig -+++ b/arch/mips/lantiq/Kconfig -@@ -17,6 +17,7 @@ config SOC_XWAY - bool "XWAY" - select SOC_TYPE_XWAY - select HW_HAS_PCI -+ select ARCH_SUPPORTS_MSI - - config SOC_FALCON - bool "FALCON" -@@ -40,6 +41,15 @@ config PCI_LANTIQ - bool "PCI Support" - depends on SOC_XWAY && PCI - -+config PCIE_LANTIQ -+ bool "PCIE Support" -+ depends on SOC_XWAY && PCI -+ -+config PCIE_LANTIQ_MSI -+ bool -+ depends on PCIE_LANTIQ && PCI_MSI -+ default y -+ - config XRX200_PHY_FW - bool "XRX200 PHY firmware loader" - depends on SOC_XWAY ---- a/arch/mips/lantiq/xway/sysctrl.c -+++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -377,6 +377,8 @@ void __init ltq_soc_init(void) - PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | - PMU_PPE_QSB | PMU_PPE_TOP); - clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY); -+ pmu_w32(~0, PMU_PWDSR1); -+ pmu_w32(pmu_r32(PMU_PWDSR) & ~PMU_PCIE_CLK, PMU_PWDSR); - } else if (of_machine_is_compatible("lantiq,ar9")) { - clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), - ltq_ar9_fpi_hz(), CLOCK_250M); ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -44,6 +44,8 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1 - obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o - obj-$(CONFIG_LANTIQ) += fixup-lantiq.o - obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o -+obj-$(CONFIG_PCIE_LANTIQ) += ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o -+obj-$(CONFIG_PCIE_LANTIQ_MSI) += pcie-lantiq-msi.o - obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o - obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o - obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o ---- /dev/null -+++ b/arch/mips/pci/fixup-lantiq-pcie.c -@@ -0,0 +1,82 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_fixup_pcie.c -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCIe -+** -+** DATE : 02 Mar 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+/*! -+ \file ifxmips_fixup_pcie.c -+ \ingroup IFX_PCIE -+ \brief PCIe Fixup functions source file -+*/ -+#include -+#include -+#include -+ -+#include -+ -+#include "pcie-lantiq.h" -+ -+#define PCI_VENDOR_ID_INFINEON 0x15D1 -+#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F -+#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011 -+#define PCI_VENDOR_ID_LANTIQ 0x1BEF -+#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011 -+ -+ -+ -+static void __devinit -+ifx_pcie_fixup_resource(struct pci_dev *dev) -+{ -+ u32 reg; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); -+ -+ printk("%s: fixup host controller %s (%04x:%04x)\n", -+ __func__, pci_name(dev), dev->vendor, dev->device); -+ -+ /* Setup COMMAND register */ -+ reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | -+ PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR; -+ pci_write_config_word(dev, PCI_COMMAND, reg); -+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource); -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource); -+ -+static void __devinit -+ifx_pcie_rc_class_early_fixup(struct pci_dev *dev) -+{ -+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); -+ -+ if (dev->devfn == PCI_DEVFN(0, 0) && -+ (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) { -+ -+ dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff); -+ -+ printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__); -+ } -+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); -+ mdelay(10); -+} -+ -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, -+ ifx_pcie_rc_class_early_fixup); -+ -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE, -+ ifx_pcie_rc_class_early_fixup); ---- a/arch/mips/pci/fixup-lantiq.c -+++ b/arch/mips/pci/fixup-lantiq.c -@@ -11,6 +11,7 @@ - - int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL; - int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL; -+int (*ltq_pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); - - int pcibios_plat_dev_init(struct pci_dev *dev) - { -@@ -28,6 +29,8 @@ int __init pcibios_map_irq(const struct - struct of_irq dev_irq; - int irq; - -+ if (ltq_pci_map_irq) -+ return ltq_pci_map_irq(dev, slot, pin); - if (of_irq_map_pci(dev, &dev_irq)) { - dev_err(&dev->dev, "trying to map irq for unknown slot:%d pin:%d\n", - slot, pin); ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pci_common.h -@@ -0,0 +1,57 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pci_common.h -+** PROJECT : IFX UEIP -+** MODULES : PCI subsystem -+** -+** DATE : 30 June 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 30 June,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+ -+#ifndef IFXMIPS_PCI_COMMON_H -+#define IFXMIPS_PCI_COMMON_H -+#include -+/*! -+ \defgroup IFX_PCI_COM IFX PCI/PCIe common parts for OS integration -+ \brief PCI/PCIe common parts -+*/ -+ -+/*! -+ \defgroup IFX_PCI_COM_OS OS APIs -+ \ingroup IFX_PCI_COM -+ \brief PCI/PCIe bus driver OS interface functions -+*/ -+/*! -+ \file ifxmips_pci_common.h -+ \ingroup IFX_PCI_COM -+ \brief PCI/PCIe bus driver common OS header file -+*/ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) -+#define IFX_PCI_CONST -+#else -+#define IFX_PCI_CONST const -+#endif -+#ifdef CONFIG_IFX_PCI -+extern int ifx_pci_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin); -+extern int ifx_pci_bios_plat_dev_init(struct pci_dev *dev); -+#endif /* COFNIG_IFX_PCI */ -+ -+#ifdef CONFIG_IFX_PCIE -+extern int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin); -+extern int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev); -+#endif -+ -+#endif /* IFXMIPS_PCI_COMMON_H */ -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie.c -@@ -0,0 +1,1607 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie.c -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCI MSI sub module -+** -+** DATE : 02 Mar 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 02 Mar,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+ /*! -+ \file ifxmips_pcie.c -+ \ingroup IFX_PCIE -+ \brief PCI express bus driver source file -+*/ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "ifxmips_pcie.h" -+#include "ifxmips_pcie_reg.h" -+ -+#define IFX_PCIE_VER_MAJOR 1 -+#define IFX_PCIE_VER_MID 5 -+#define IFX_PCIE_VER_MINOR 3 -+ -+/* Enable 32bit io due to its mem mapped io nature */ -+#define IFX_PCIE_ERROR_INT -+#define CONFIG_IFX_PCIE_1ST_CORE -+#define IFX_PCIE_IO_32BIT -+ -+#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25) -+#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8) -+#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9) -+#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10) -+#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11) -+#define MS(_v, _f) (((_v) & (_f)) >> _f##_S) -+#define SM(_v, _f) (((_v) << _f##_S) & (_f)) -+#define IFX_REG_SET_BIT(_f, _r) \ -+ IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r)) -+ -+static DEFINE_SPINLOCK(ifx_pcie_lock); -+ -+u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG); -+ -+static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = { -+ { -+ .ir_irq = { -+ .irq = IFX_PCIE_IR, -+ .name = "ifx_pcie_rc0", -+ }, -+ -+ .legacy_irq = { -+ { -+ .irq_bit = PCIE_IRN_INTA, -+ .irq = IFX_PCIE_INTA, -+ }, -+ { -+ .irq_bit = PCIE_IRN_INTB, -+ .irq = IFX_PCIE_INTB, -+ }, -+ { -+ .irq_bit = PCIE_IRN_INTC, -+ .irq = IFX_PCIE_INTC, -+ }, -+ { -+ .irq_bit = PCIE_IRN_INTD, -+ .irq = IFX_PCIE_INTD, -+ }, -+ }, -+ }, -+ -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+ { -+ .ir_irq = { -+ .irq = IFX_PCIE1_IR, -+ .name = "ifx_pcie_rc1", -+ }, -+ -+ .legacy_irq = { -+ { -+ .irq_bit = PCIE_IRN_INTA, -+ .irq = IFX_PCIE1_INTA, -+ }, -+ { -+ .irq_bit = PCIE_IRN_INTB, -+ .irq = IFX_PCIE1_INTB, -+ }, -+ { -+ .irq_bit = PCIE_IRN_INTC, -+ .irq = IFX_PCIE1_INTC, -+ }, -+ { -+ .irq_bit = PCIE_IRN_INTD, -+ .irq = IFX_PCIE1_INTD, -+ }, -+ }, -+ -+ }, -+#endif /* CONFIG_IFX_PCIE_2ND_CORE */ -+}; -+ -+void -+ifx_pcie_debug(const char *fmt, ...) -+{ -+ static char buf[256] = {0}; /* XXX */ -+ va_list ap; -+ -+ va_start(ap, fmt); -+ vsnprintf(buf, sizeof(buf), fmt, ap); -+ va_end(ap); -+ -+ printk("%s", buf); -+} -+ -+#ifdef IFX_PCI_PHY_DBG -+/* Generate hot reset, XXX must catpure to verify */ -+static INLINE void -+pcie_secondary_bus_reset(int pcie_port) -+{ -+ int i; -+ u32 reg; -+#define IFX_PCIE_RESET_TIME 20 -+ -+ /* Assert Secondary Bus Reset */ -+ reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)); -+ reg |= PCIE_INTRBCTRL_RST_SECONDARY_BUS; -+ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port)); -+ -+ /* De-assert Secondary Bus Reset */ -+ reg &= ~PCIE_INTRBCTRL_RST_SECONDARY_BUS; -+ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port)); -+ -+ /* XXX, wait at least 100 ms, then restore again */ -+ for (i = 0; i < IFX_PCIE_RESET_TIME; i++) { -+ mdelay(10); -+ } -+#undef IFX_PCIE_RESET_TIME -+} -+ -+/* Error or L0s to L0 */ -+static INLINE int -+pcie_retrain_link(int pcie_port) -+{ -+ int i; -+ u32 reg; -+#define IFX_PCIE_RETRAIN_TIME 1000 -+ -+ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); -+ reg |= PCIE_LCTLSTS_RETRIAN_LINK; -+ IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port)); -+ -+ /* Wait for the link to come up */ -+ for (i = 0; i < IFX_PCIE_RETRAIN_TIME; i++) { -+ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) { -+ break; -+ } -+ udelay(100); -+ } -+ if (i >= IFX_PCIE_RETRAIN_TIME) { -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s retrain timeout\n", __func__); -+ return -1; -+ } -+ return 0; -+#undef IFX_PCIE_RETRAIN_TIME -+} -+ -+static INLINE void -+pcie_disable_scrambling(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(PCIE_PLCR(pcie_port)); -+ reg |= PCIE_PLCR_SCRAMBLE_DISABLE; -+ IFX_REG_W32(reg, PCIE_PLCR(pcie_port)); -+} -+#endif /* IFX_PCI_PHY_DBG */ -+ -+static INLINE int -+pcie_ltssm_enable(int pcie_port) -+{ -+ int i; -+#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10 -+ -+ IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); /* Enable LTSSM */ -+ -+ /* Wait for the link to come up */ -+ for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) { -+ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) { -+ break; -+ } -+ udelay(10); -+ } -+ if (i >= IFX_PCIE_LTSSM_ENABLE_TIMEOUT) { -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s link timeout!!!!!\n", __func__); -+ return -1; -+ } -+ return 0; -+#undef IFX_PCIE_LTSSM_ENABLE_TIMEOUT -+} -+ -+static INLINE void -+pcie_ltssm_disable(int pcie_port) -+{ -+ IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); /* Disable LTSSM */ -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_RC_CCR 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_RC_CCR(pcie_port))); -+} -+ -+static INLINE void -+pcie_ahb_bus_error_suppress(int pcie_port) -+{ -+ IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port)); -+} -+ -+static INLINE void -+pcie_status_register_clear(int pcie_port) -+{ -+ /* Clear the status register, XXX, seperate function */ -+ IFX_REG_W32(0, PCIE_RC_DR(pcie_port)); -+ IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port)); -+ IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port)); -+ IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port)); -+ IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port)); -+ IFX_REG_W32(0, PCIE_RSTS(pcie_port)); -+ IFX_REG_W32(0, PCIE_UES_R(pcie_port)); -+ IFX_REG_W32(0, PCIE_UEMR(pcie_port)); -+ IFX_REG_W32(0, PCIE_UESR(pcie_port)); -+ IFX_REG_W32(0, PCIE_CESR(pcie_port)); -+ IFX_REG_W32(0, PCIE_CEMR(pcie_port)); -+ IFX_REG_W32(0, PCIE_RESR(pcie_port)); -+ IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port)); -+ IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port)); -+ IFX_REG_W32(0, PCIE_TPFCS(pcie_port)); -+ IFX_REG_W32(0, PCIE_TNPFCS(pcie_port)); -+ IFX_REG_W32(0, PCIE_TCFCS(pcie_port)); -+ IFX_REG_W32(0, PCIE_QSR(pcie_port)); -+ IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port)); -+} -+ -+static inline int -+ifx_pcie_link_up(int pcie_port) -+{ -+ return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0; -+} -+ -+#ifdef IFX_PCIE_DBG -+static void -+pcie_status_registers_dump(int pcie_port) -+{ -+ printk(KERN_INFO "PCIe_PCICMDSTS: 0x%08x\n", IFX_REG_R32(PCIE_PCICMDSTS(pcie_port))); -+ printk(KERN_INFO "PCIe_RC_DR: 0x%08x\n", IFX_REG_R32(PCIE_RC_DR(pcie_port))); -+ printk(KERN_INFO "PCIe_DCTLSTS: 0x%08x\n", IFX_REG_R32(PCIE_DCTLSTS(pcie_port))); -+ printk(KERN_INFO "PCIe_LCTLSTS: 0x%08x\n", IFX_REG_R32(PCIE_LCTLSTS(pcie_port))); -+ printk(KERN_INFO "PCIe_SLCTLSTS: 0x%08x\n", IFX_REG_R32(PCIE_SLCTLSTS(pcie_port))); -+ printk(KERN_INFO "PCIe_RSTS: 0x%08x\n", IFX_REG_R32(PCIE_RSTS(pcie_port))); -+ printk(KERN_INFO "PCIe_UES_R: 0x%08x\n", IFX_REG_R32(PCIE_UES_R(pcie_port))); -+ printk(KERN_INFO "PCIe_UEMR: 0x%08x\n", IFX_REG_R32(PCIE_UEMR(pcie_port))); -+ printk(KERN_INFO "PCIe_UESR: 0x%08x\n", IFX_REG_R32(PCIE_UESR(pcie_port))); -+ printk(KERN_INFO "PCIe_CESR: 0x%08x\n", IFX_REG_R32(PCIE_CESR(pcie_port))); -+ printk(KERN_INFO "PCIe_CEMR: 0x%08x\n", IFX_REG_R32(PCIE_CEMR(pcie_port))); -+ printk(KERN_INFO "PCIe_RESR: 0x%08x\n", IFX_REG_R32(PCIE_RESR(pcie_port))); -+ printk(KERN_INFO "PCIe_ESIR: 0x%08x\n", IFX_REG_R32(PCIE_ESIR(pcie_port))); -+ printk(KERN_INFO "PCIe_PVCCRSR: 0x%08x\n", IFX_REG_R32(PCIE_PVCCRSR(pcie_port))); -+ printk(KERN_INFO "PCIe_VC0_RSR0: 0x%08x\n", IFX_REG_R32(PCIE_VC0_RSR0(pcie_port))); -+ printk(KERN_INFO "PCIe_TPFCS: 0x%08x\n", IFX_REG_R32(PCIE_TPFCS(pcie_port))); -+ printk(KERN_INFO "PCIe_TNPFCS: 0x%08x\n", IFX_REG_R32(PCIE_TNPFCS(pcie_port))); -+ printk(KERN_INFO "PCIe_TCFCS: 0x%08x\n", IFX_REG_R32(PCIE_TCFCS(pcie_port))); -+ printk(KERN_INFO "PCIe_QSR: 0x%08x\n", IFX_REG_R32(PCIE_QSR(pcie_port))); -+ printk(KERN_INFO "PCIe_VCTAR1: 0x%08x\n", IFX_REG_R32(PCIE_VCTAR1(pcie_port))); -+ printk(KERN_INFO "PCIe_VCTAR2: 0x%08x\n", IFX_REG_R32(PCIE_VCTAR2(pcie_port))); -+ printk(KERN_INFO "PCIe_IOBLSECS: 0x%08x\n", IFX_REG_R32(PCIE_IOBLSECS(pcie_port))); -+ printk(KERN_INFO "PCIe_ALTRT: 0x%08x\n", IFX_REG_R32(PCIE_ALTRT(pcie_port))); -+ printk(KERN_INFO "PCIe_SNR: 0x%08x\n", IFX_REG_R32(PCIE_SNR(pcie_port))); -+ printk(KERN_INFO "PCIe_DBR0: 0x%08x\n", IFX_REG_R32(PCIE_DBR0(pcie_port))); -+ printk(KERN_INFO "PCIe_DBR1: 0x%08x\n", IFX_REG_R32(PCIE_DBR1(pcie_port))); -+} -+ -+static void -+pcie_post_dump(int pcie_port) -+{ -+ printk(KERN_INFO "PCIe_PCICMDSTS: 0x%08x\n", IFX_REG_R32(PCIE_PCICMDSTS(pcie_port))); -+ printk(KERN_INFO "PCIe_MBML: 0x%08x\n", IFX_REG_R32(PCIE_MBML(pcie_port))); -+ printk(KERN_INFO "PCIe_PBML: 0x%08x\n", IFX_REG_R32(PCIE_PMBL(pcie_port))); -+ printk(KERN_INFO "PCIe_IOBLSECS: 0x%08x\n", IFX_REG_R32(PCIE_IOBLSECS(pcie_port))); -+ printk(KERN_INFO "PCIe_IO_BANDL: 0x%08x\n", IFX_REG_R32(PCIE_IO_BANDL(pcie_port))); -+ printk(KERN_INFO "PCIe_INTRBCTRL: 0x%08x\n", IFX_REG_R32(PCIE_INTRBCTRL(pcie_port))); -+ printk(KERN_INFO "Power State: D%1d\n", IFX_REG_R32(PCIE_PM_CSR(pcie_port)) & PCIE_PM_CSR_POWER_STATE); -+ printk(KERN_INFO "Negotiated Link Width: %d\n", MS(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)), PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH)); -+ printk(KERN_INFO "Number of VCs: %d\n", IFX_REG_R32(PCIE_PVC1(pcie_port)) & PCIE_PVC1_EXT_VC_CNT); -+ printk(KERN_INFO "Low-priority VCs: %d\n", MS(IFX_REG_R32(PCIE_PVC1(pcie_port)), PCIE_PVC1_LOW_PRI_EXT_VC_CNT)); -+ printk(KERN_INFO "VC Arbitration: 0x%08x\n", IFX_REG_R32(PCIE_PVC2(pcie_port)) & PCIE_PVC2_VC_ARB_WRR); -+ printk(KERN_INFO "Port Arbitration: 0x%08x\n", IFX_REG_R32(PCIE_VC0_RC(pcie_port)) & PCIE_VC0_RC_PORT_ARB); -+ -+ if (ifx_pcie_link_up(pcie_port)) { -+ printk(KERN_INFO "PCIe PHY Link is UP\n"); -+ } -+ else { -+ printk(KERN_INFO "PCIe PHY Link is DOWN!\n"); -+ } -+ if ((IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) { -+ printk(KERN_INFO "PCIe DLL is UP\n"); -+ } -+ else { -+ printk(KERN_INFO "PCIe DLL is DOWN!\n"); -+ } -+ -+ if ((IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) { -+ printk(KERN_INFO "PCIE_LCTLSTS in DL_Active state!\n"); -+ } -+ else { -+ printk(KERN_INFO "PCIE_LCTLSTS NOT in DL_Active state!\n"); -+ } -+ } -+#endif /* IFX_PCIE_DBG */ -+ -+/* XXX, this function is not needed in fact */ -+static INLINE void -+pcie_mem_io_setup(int pcie_port) -+{ -+ u32 reg; -+ /* -+ * BAR[0:1] readonly register -+ * RC contains only minimal BARs for packets mapped to this device -+ * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that -+ * reside on the downstream side fo the bridge. -+ */ -+ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR) -+ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR); -+ -+ IFX_REG_W32(reg, PCIE_MBML(pcie_port)); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_MBML: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_MBML(pcie_port))); -+ -+#ifdef IFX_PCIE_PREFETCH_MEM_64BIT -+ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_PMBL_END_ADDR) -+ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_PMBL_UPPER_12BIT) -+ | PCIE_PMBL_64BIT_ADDR; -+ IFX_REG_W32(reg, PCIE_PMBL(pcie_port)); -+ -+ /* Must configure upper 32bit */ -+ IFX_REG_W32(0, PCIE_PMBU32(pcie_port)); -+ IFX_REG_W32(0, PCIE_PMLU32(pcie_port)); -+#else -+ /* PCIe_PBML, same as MBML */ -+ IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port)); -+#endif -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PMBL: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_PMBL(pcie_port))); -+ -+ /* IO Address Range */ -+ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR) -+ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR); -+#ifdef IFX_PCIE_IO_32BIT -+ reg |= PCIE_IOBLSECS_32BIT_IO_ADDR; -+#endif /* IFX_PCIE_IO_32BIT */ -+ IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port)); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IOBLSECS: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_IOBLSECS(pcie_port))); -+#ifdef IFX_PCIE_IO_32BIT -+ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT) -+ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE); -+ IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port)); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IO_BANDL: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_IO_BANDL(pcie_port))); -+#endif /* IFX_PCIE_IO_32BIT */ -+} -+ -+static INLINE void -+pcie_msi_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* XXX, MSI stuff should only apply to EP */ -+ /* MSI Capability: Only enable 32-bit addresses */ -+ reg = IFX_REG_R32(PCIE_MCAPR(pcie_port)); -+ reg &= ~PCIE_MCAPR_ADDR64_CAP; -+ -+ reg |= PCIE_MCAPR_MSI_ENABLE; -+ -+ /* Disable multiple message */ -+ reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE); -+ IFX_REG_W32(reg, PCIE_MCAPR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_MCAPR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_MCAPR(pcie_port))); -+} -+ -+static INLINE void -+pcie_pm_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Enable PME, Soft reset enabled */ -+ reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port)); -+ reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST; -+ IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PM_CSR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_PM_CSR(pcie_port))); -+} -+ -+static INLINE void -+pcie_bus_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM); -+ IFX_REG_W32(reg, PCIE_BNR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_BNR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_BNR(pcie_port))); -+} -+ -+static INLINE void -+pcie_device_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Device capability register, set up Maximum payload size */ -+ reg = IFX_REG_R32(PCIE_DCAP(pcie_port)); -+ reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT; -+ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE); -+ -+ /* Only available for EP */ -+ reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY); -+ IFX_REG_W32(reg, PCIE_DCAP(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_DCAP: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_DCAP(pcie_port))); -+ -+ /* Device control and status register */ -+ /* Set Maximum Read Request size for the device as a Requestor */ -+ reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port)); -+ -+ /* -+ * Request size can be larger than the MPS used, but the completions returned -+ * for the read will be bounded by the MPS size. -+ * In our system, Max request size depends on AHB burst size. It is 64 bytes. -+ * but we set it as 128 as minimum one. -+ */ -+ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE) -+ | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE); -+ -+ /* Enable relaxed ordering, no snoop, and all kinds of errors */ -+ reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN; -+ -+ IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_DCTLSTS: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_DCTLSTS(pcie_port))); -+} -+ -+static INLINE void -+pcie_link_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* -+ * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM -+ * L0s is reported during link training via TS1 order set by N_FTS -+ */ -+ reg = IFX_REG_R32(PCIE_LCAP(pcie_port)); -+ reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY; -+ reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY); -+ IFX_REG_W32(reg, PCIE_LCAP(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_LCAP: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_LCAP(pcie_port))); -+ -+ /* Link control and status register */ -+ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); -+ -+ /* Link Enable, ASPM enabled */ -+ reg &= ~PCIE_LCTLSTS_LINK_DISABLE; -+ -+#ifdef CONFIG_PCIEASPM -+ /* -+ * We use the same physical reference clock that the platform provides on the connector -+ * It paved the way for ASPM to calculate the new exit Latency -+ */ -+ reg |= PCIE_LCTLSTS_SLOT_CLK_CFG; -+ reg |= PCIE_LCTLSTS_COM_CLK_CFG; -+ /* -+ * We should disable ASPM by default except that we have dedicated power management support -+ * Enable ASPM will cause the system hangup/instability, performance degration -+ */ -+ reg |= PCIE_LCTLSTS_ASPM_ENABLE; -+#else -+ reg &= ~PCIE_LCTLSTS_ASPM_ENABLE; -+#endif /* CONFIG_PCIEASPM */ -+ -+ /* -+ * The maximum size of any completion with data packet is bounded by the MPS setting -+ * in device control register -+ */ -+ -+ /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */ -+ reg &= ~ PCIE_LCTLSTS_RCB128; -+ -+ IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_LCTLSTS: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_LCTLSTS(pcie_port))); -+} -+ -+static INLINE void -+pcie_error_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* -+ * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone -+ * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE -+ */ -+ reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)); -+ reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE; -+ -+ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_INTRBCTRL: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_INTRBCTRL(pcie_port))); -+ -+ /* Uncorrectable Error Mask Register, Unmask all bits in PCIE_UESR */ -+ reg = IFX_REG_R32(PCIE_UEMR(pcie_port)); -+ reg &= ~PCIE_ALL_UNCORRECTABLE_ERR; -+ IFX_REG_W32(reg, PCIE_UEMR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_UEMR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_UEMR(pcie_port))); -+ -+ /* Uncorrectable Error Severity Register, ALL errors are FATAL */ -+ IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_UESR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_UESR(pcie_port))); -+ -+ /* Correctable Error Mask Register, unmask all bits */ -+ reg = IFX_REG_R32(PCIE_CEMR(pcie_port)); -+ reg &= ~PCIE_CORRECTABLE_ERR; -+ IFX_REG_W32(reg, PCIE_CEMR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_CEMR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_CEMR(pcie_port))); -+ -+ /* Advanced Error Capabilities and Control Registr */ -+ reg = IFX_REG_R32(PCIE_AECCR(pcie_port)); -+ reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN; -+ IFX_REG_W32(reg, PCIE_AECCR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_AECCR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_AECCR(pcie_port))); -+ -+ /* Root Error Command Register, Report all types of errors */ -+ reg = IFX_REG_R32(PCIE_RECR(pcie_port)); -+ reg |= PCIE_RECR_ERR_REPORT_EN; -+ IFX_REG_W32(reg, PCIE_RECR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_RECR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_RECR(pcie_port))); -+ -+ /* Clear the Root status register */ -+ reg = IFX_REG_R32(PCIE_RESR(pcie_port)); -+ IFX_REG_W32(reg, PCIE_RESR(pcie_port)); -+} -+ -+static INLINE void -+pcie_root_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Root control and capabilities register */ -+ reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port)); -+ reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN; -+ IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_RCTLCAP: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_RCTLCAP(pcie_port))); -+} -+ -+static INLINE void -+pcie_vc_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Port VC Capability Register 2 */ -+ reg = IFX_REG_R32(PCIE_PVC2(pcie_port)); -+ reg &= ~PCIE_PVC2_VC_ARB_WRR; -+ reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR; -+ IFX_REG_W32(reg, PCIE_PVC2(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PVC2: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_PVC2(pcie_port))); -+ -+ /* VC0 Resource Capability Register */ -+ reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port)); -+ reg &= ~PCIE_VC0_RC_REJECT_SNOOP; -+ IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_VC0_RC: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_VC0_RC(pcie_port))); -+} -+ -+static INLINE void -+pcie_port_logic_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */ -+ reg = IFX_REG_R32(PCIE_AFR(pcie_port)); -+ reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM); -+ reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM) -+ | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM); -+ /* L0s and L1 entry latency */ -+ reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY); -+ reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY) -+ | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY); -+ IFX_REG_W32(reg, PCIE_AFR(pcie_port)); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_AFR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_AFR(pcie_port))); -+ -+ /* Port Link Control Register */ -+ reg = IFX_REG_R32(PCIE_PLCR(pcie_port)); -+ reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */ -+ IFX_REG_W32(reg, PCIE_PLCR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PLCR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_PLCR(pcie_port))); -+ -+ /* Lane Skew Register */ -+ reg = IFX_REG_R32(PCIE_LSR(pcie_port)); -+ /* Enable ACK/NACK and FC */ -+ reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE); -+ IFX_REG_W32(reg, PCIE_LSR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_LSR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_LSR(pcie_port))); -+ -+ /* Symbol Timer Register and Filter Mask Register 1 */ -+ reg = IFX_REG_R32(PCIE_STRFMR(pcie_port)); -+ -+ /* Default SKP interval is very accurate already, 5us */ -+ /* Enable IO/CFG transaction */ -+ reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE; -+ /* Disable FC WDT */ -+ reg &= ~PCIE_STRFMR_FC_WDT_DISABLE; -+ IFX_REG_W32(reg, PCIE_STRFMR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_STRFMR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_STRFMR(pcie_port))); -+ -+ /* Filter Masker Register 2 */ -+ reg = IFX_REG_R32(PCIE_FMR2(pcie_port)); -+ reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1; -+ IFX_REG_W32(reg, PCIE_FMR2(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_FMR2: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_FMR2(pcie_port))); -+ -+ /* VC0 Completion Receive Queue Control Register */ -+ reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port)); -+ reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE; -+ reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE); -+ IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_VC0_CRQCR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port))); -+} -+ -+static INLINE void -+pcie_rc_cfg_reg_setup(int pcie_port) -+{ -+ pcie_ltssm_disable(pcie_port); -+ pcie_mem_io_setup(pcie_port); -+ pcie_msi_setup(pcie_port); -+ pcie_pm_setup(pcie_port); -+ pcie_bus_setup(pcie_port); -+ pcie_device_setup(pcie_port); -+ pcie_link_setup(pcie_port); -+ pcie_error_setup(pcie_port); -+ pcie_root_setup(pcie_port); -+ pcie_vc_setup(pcie_port); -+ pcie_port_logic_setup(pcie_port); -+} -+ -+static int -+ifx_pcie_wait_phy_link_up(int pcie_port) -+{ -+#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000 /* XXX, tunable */ -+ int i; -+ -+ /* Wait for PHY link is up */ -+ for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) { -+ if (ifx_pcie_link_up(pcie_port)) { -+ break; -+ } -+ udelay(100); -+ } -+ if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) { -+ printk(KERN_ERR "%s timeout\n", __func__); -+ return -1; -+ } -+ -+ /* Check data link up or not */ -+ if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) { -+ printk(KERN_ERR "%s DLL link is still down\n", __func__); -+ return -1; -+ } -+ -+ /* Check Data link active or not */ -+ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) { -+ printk(KERN_ERR "%s DLL is not active\n", __func__); -+ return -1; -+ } -+ return 0; -+#undef IFX_PCIE_PHY_LINK_UP_TIMEOUT -+} -+ -+static INLINE int -+pcie_app_loigc_setup(int pcie_port) -+{ -+#ifdef IFX_PCIE_PHY_DBG -+ pcie_disable_scrambling(pcie_port); -+#endif /* IFX_PCIE_PHY_DBG */ -+ pcie_ahb_bus_error_suppress(pcie_port); -+ -+ /* Pull PCIe EP out of reset */ -+ pcie_device_rst_deassert(pcie_port); -+ -+ /* Start LTSSM training between RC and EP */ -+ pcie_ltssm_enable(pcie_port); -+ -+ /* Check PHY status after enabling LTSSM */ -+ if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) { -+ return -1; -+ } -+ return 0; -+} -+ -+/* -+ * Must be done after ltssm due to based on negotiated link -+ * width and payload size -+ * Update the Replay Time Limit. Empirically, some PCIe -+ * devices take a little longer to respond than expected under -+ * load. As a workaround for this we configure the Replay Time -+ * Limit to the value expected for a 512 byte MPS instead of -+ * our actual 128 byte MPS. The numbers below are directly -+ * from the PCIe spec table 3-4/5. -+ */ -+static INLINE void -+pcie_replay_time_update(int pcie_port) -+{ -+ u32 reg; -+ int nlw; -+ int rtl; -+ -+ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); -+ -+ nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH); -+ switch (nlw) { -+ case PCIE_MAX_LENGTH_WIDTH_X1: -+ rtl = 1677; -+ break; -+ case PCIE_MAX_LENGTH_WIDTH_X2: -+ rtl = 867; -+ break; -+ case PCIE_MAX_LENGTH_WIDTH_X4: -+ rtl = 462; -+ break; -+ case PCIE_MAX_LENGTH_WIDTH_X8: -+ rtl = 258; -+ break; -+ default: -+ rtl = 1677; -+ break; -+ } -+ reg = IFX_REG_R32(PCIE_ALTRT(pcie_port)); -+ reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT; -+ reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT); -+ IFX_REG_W32(reg, PCIE_ALTRT(pcie_port)); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_ALTRT 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_ALTRT(pcie_port))); -+} -+ -+/* -+ * Table 359 Enhanced Configuration Address Mapping1) -+ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1 -+ * Memory Address PCI Express Configuration Space -+ * A[(20+n-1):20] Bus Number 1 < n < 8 -+ * A[19:15] Device Number -+ * A[14:12] Function Number -+ * A[11:8] Extended Register Number -+ * A[7:2] Register Number -+ * A[1:0] Along with size of the access, used to generate Byte Enables -+ * For VR9, only the address bits [22:0] are mapped to the configuration space: -+ * . Address bits [22:20] select the target bus (1-of-8)1) -+ * . Address bits [19:15] select the target device (1-of-32) on the bus -+ * . Address bits [14:12] select the target function (1-of-8) within the device. -+ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space -+ * . Address bits [1:0] define the start byte location within the selected dword. -+ */ -+static inline u32 -+pcie_bus_addr(u8 bus_num, u16 devfn, int where) -+{ -+ u32 addr; -+ u8 bus; -+ -+ if (!bus_num) { -+ /* type 0 */ -+ addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3); -+ } -+ else { -+ bus = bus_num; -+ /* type 1, only support 8 buses */ -+ addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) | -+ ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3); -+ } -+ IFX_PCIE_PRINT(PCIE_MSG_CFG, "%s: bus addr : %02x:%02x.%01x/%02x, addr=%08x\n", -+ __func__, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), where, addr); -+ return addr; -+} -+ -+static int -+pcie_valid_config(int pcie_port, int bus, int dev) -+{ -+ /* RC itself */ -+ if ((bus == 0) && (dev == 0)) { -+ return 1; -+ } -+ -+ /* No physical link */ -+ if (!ifx_pcie_link_up(pcie_port)) { -+ return 0; -+ } -+ -+ /* Bus zero only has RC itself -+ * XXX, check if EP will be integrated -+ */ -+ if ((bus == 0) && (dev != 0)) { -+ return 0; -+ } -+ -+ /* Maximum 8 buses supported for VRX */ -+ if (bus > 9) { -+ return 0; -+ } -+ -+ /* -+ * PCIe is PtP link, one bus only supports only one device -+ * except bus zero and PCIe switch which is virtual bus device -+ * The following two conditions really depends on the system design -+ * and attached the device. -+ * XXX, how about more new switch -+ */ -+ if ((bus == 1) && (dev != 0)) { -+ return 0; -+ } -+ -+ if ((bus >= 3) && (dev != 0)) { -+ return 0; -+ } -+ return 1; -+} -+ -+static INLINE u32 -+ifx_pcie_cfg_rd(int pcie_port, u32 reg) -+{ -+ return IFX_REG_R32((volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); -+} -+ -+static INLINE void -+ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, u32 val) -+{ -+ IFX_REG_W32( val, (volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); -+} -+ -+static INLINE u32 -+ifx_pcie_rc_cfg_rd(int pcie_port, u32 reg) -+{ -+ return IFX_REG_R32((volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); -+} -+ -+static INLINE void -+ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, u32 val) -+{ -+ IFX_REG_W32(val, (volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); -+} -+ -+u32 -+ifx_pcie_bus_enum_read_hack(int where, u32 value) -+{ -+ u32 tvalue = value; -+ -+ if (where == PCI_PRIMARY_BUS) { -+ u8 primary, secondary, subordinate; -+ -+ primary = tvalue & 0xFF; -+ secondary = (tvalue >> 8) & 0xFF; -+ subordinate = (tvalue >> 16) & 0xFF; -+ primary += pcibios_1st_host_bus_nr(); -+ secondary += pcibios_1st_host_bus_nr(); -+ subordinate += pcibios_1st_host_bus_nr(); -+ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16); -+ } -+ return tvalue; -+} -+ -+u32 -+ifx_pcie_bus_enum_write_hack(int where, u32 value) -+{ -+ u32 tvalue = value; -+ -+ if (where == PCI_PRIMARY_BUS) { -+ u8 primary, secondary, subordinate; -+ -+ primary = tvalue & 0xFF; -+ secondary = (tvalue >> 8) & 0xFF; -+ subordinate = (tvalue >> 16) & 0xFF; -+ if (primary > 0 && primary != 0xFF) { -+ primary -= pcibios_1st_host_bus_nr(); -+ } -+ -+ if (secondary > 0 && secondary != 0xFF) { -+ secondary -= pcibios_1st_host_bus_nr(); -+ } -+ if (subordinate > 0 && subordinate != 0xFF) { -+ subordinate -= pcibios_1st_host_bus_nr(); -+ } -+ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16); -+ } -+ else if (where == PCI_SUBORDINATE_BUS) { -+ u8 subordinate = tvalue & 0xFF; -+ -+ subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0; -+ tvalue = subordinate; -+ } -+ return tvalue; -+} -+ -+/** -+ * \fn static int ifx_pcie_read_config(struct pci_bus *bus, u32 devfn, -+ * int where, int size, u32 *value) -+ * \brief Read a value from configuration space -+ * -+ * \param[in] bus Pointer to pci bus -+ * \param[in] devfn PCI device function number -+ * \param[in] where PCI register number -+ * \param[in] size Register read size -+ * \param[out] value Pointer to return value -+ * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number -+ * \return PCIBIOS_FUNC_NOT_SUPPORTED PCI function not supported -+ * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found -+ * \return PCIBIOS_SUCCESSFUL OK -+ * \ingroup IFX_PCIE_OS -+ */ -+static int -+ifx_pcie_read_config(struct pci_bus *bus, u32 devfn, -+ int where, int size, u32 *value) -+{ -+ u32 data = 0; -+ int bus_number = bus->number; -+ static const u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0}; -+ int ret = PCIBIOS_SUCCESSFUL; -+ struct ifx_pci_controller *ctrl = bus->sysdata; -+ int pcie_port = ctrl->port; -+ -+ if (unlikely(size != 1 && size != 2 && size != 4)){ -+ ret = PCIBIOS_BAD_REGISTER_NUMBER; -+ goto out; -+ } -+ -+ /* Make sure the address is aligned to natural boundary */ -+ if (unlikely(((size - 1) & where))) { -+ ret = PCIBIOS_BAD_REGISTER_NUMBER; -+ goto out; -+ } -+ -+ /* -+ * If we are second controller, we have to cheat OS so that it assume -+ * its bus number starts from 0 in host controller -+ */ -+ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); -+ -+ /* -+ * We need to force the bus number to be zero on the root -+ * bus. Linux numbers the 2nd root bus to start after all -+ * busses on root 0. -+ */ -+ if (bus->parent == NULL) { -+ bus_number = 0; -+ } -+ -+ /* -+ * PCIe only has a single device connected to it. It is -+ * always device ID 0. Don't bother doing reads for other -+ * device IDs on the first segment. -+ */ -+ if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) { -+ ret = PCIBIOS_FUNC_NOT_SUPPORTED; -+ goto out; -+ } -+ -+ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { -+ *value = 0xffffffff; -+ ret = PCIBIOS_DEVICE_NOT_FOUND; -+ goto out; -+ } -+ -+ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: %02x:%02x.%01x/%02x:%01d\n", __func__, bus_number, -+ PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); -+ -+ PCIE_IRQ_LOCK(ifx_pcie_lock); -+ if (bus_number == 0) { /* RC itself */ -+ u32 t; -+ -+ t = (where & ~3); -+ data = ifx_pcie_rc_cfg_rd(pcie_port, t); -+ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: rd local cfg, offset:%08x, data:%08x\n", -+ __func__, t, data); -+ } -+ else { -+ u32 addr = pcie_bus_addr(bus_number, devfn, where); -+ -+ data = ifx_pcie_cfg_rd(pcie_port, addr); -+ if (pcie_port == IFX_PCIE_PORT0) { -+ #ifdef CONFIG_IFX_PCIE_HW_SWAP -+ data = le32_to_cpu(data); -+ #endif /* CONFIG_IFX_PCIE_HW_SWAP */ -+ } -+ else { -+ #ifdef CONFIG_IFX_PCIE1_HW_SWAP -+ data = le32_to_cpu(data); -+ #endif /* CONFIG_IFX_PCIE_HW_SWAP */ -+ } -+ } -+ /* To get a correct PCI topology, we have to restore the bus number to OS */ -+ data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1); -+ -+ PCIE_IRQ_UNLOCK(ifx_pcie_lock); -+ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: read config: data=%08x raw=%08x\n", -+ __func__, (data >> (8 * (where & 3))) & mask[size & 7], data); -+ -+ *value = (data >> (8 * (where & 3))) & mask[size & 7]; -+out: -+ return ret; -+} -+ -+static u32 -+ifx_pcie_size_to_value(int where, int size, u32 data, u32 value) -+{ -+ u32 shift; -+ u32 tdata = data; -+ -+ switch (size) { -+ case 1: -+ shift = (where & 0x3) << 3; -+ tdata &= ~(0xffU << shift); -+ tdata |= ((value & 0xffU) << shift); -+ break; -+ case 2: -+ shift = (where & 3) << 3; -+ tdata &= ~(0xffffU << shift); -+ tdata |= ((value & 0xffffU) << shift); -+ break; -+ case 4: -+ tdata = value; -+ break; -+ } -+ return tdata; -+} -+ -+/** -+ * \fn static static int ifx_pcie_write_config(struct pci_bus *bus, u32 devfn, -+ * int where, int size, u32 value) -+ * \brief Write a value to PCI configuration space -+ * -+ * \param[in] bus Pointer to pci bus -+ * \param[in] devfn PCI device function number -+ * \param[in] where PCI register number -+ * \param[in] size The register size to be written -+ * \param[in] value The valule to be written -+ * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number -+ * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found -+ * \return PCIBIOS_SUCCESSFUL OK -+ * \ingroup IFX_PCIE_OS -+ */ -+static int -+ifx_pcie_write_config(struct pci_bus *bus, u32 devfn, -+ int where, int size, u32 value) -+{ -+ int bus_number = bus->number; -+ int ret = PCIBIOS_SUCCESSFUL; -+ struct ifx_pci_controller *ctrl = bus->sysdata; -+ int pcie_port = ctrl->port; -+ u32 tvalue = value; -+ u32 data; -+ -+ /* Make sure the address is aligned to natural boundary */ -+ if (unlikely(((size - 1) & where))) { -+ ret = PCIBIOS_BAD_REGISTER_NUMBER; -+ goto out; -+ } -+ /* -+ * If we are second controller, we have to cheat OS so that it assume -+ * its bus number starts from 0 in host controller -+ */ -+ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); -+ -+ /* -+ * We need to force the bus number to be zero on the root -+ * bus. Linux numbers the 2nd root bus to start after all -+ * busses on root 0. -+ */ -+ if (bus->parent == NULL) { -+ bus_number = 0; -+ } -+ -+ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { -+ ret = PCIBIOS_DEVICE_NOT_FOUND; -+ goto out; -+ } -+ -+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: %02x:%02x.%01x/%02x:%01d value=%08x\n", __func__, -+ bus_number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value); -+ -+ /* XXX, some PCIe device may need some delay */ -+ PCIE_IRQ_LOCK(ifx_pcie_lock); -+ -+ /* -+ * To configure the correct bus topology using native way, we have to cheat Os so that -+ * it can configure the PCIe hardware correctly. -+ */ -+ tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0); -+ -+ if (bus_number == 0) { /* RC itself */ -+ u32 t; -+ -+ t = (where & ~3); -+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, fill:%08x\n", __func__, t, value); -+ data = ifx_pcie_rc_cfg_rd(pcie_port, t); -+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, data:%08x\n", __func__, t, data); -+ -+ data = ifx_pcie_size_to_value(where, size, data, tvalue); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, value:%08x\n", __func__, t, data); -+ ifx_pcie_rc_cfg_wr(pcie_port, t, data); -+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, value:%08x\n", -+ __func__, t, ifx_pcie_rc_cfg_rd(pcie_port, t)); -+ } -+ else { -+ u32 addr = pcie_bus_addr(bus_number, devfn, where); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr cfg, offset:%08x, fill:%08x\n", __func__, addr, value); -+ data = ifx_pcie_cfg_rd(pcie_port, addr); -+ if (pcie_port == IFX_PCIE_PORT0) { -+ #ifdef CONFIG_IFX_PCIE_HW_SWAP -+ data = le32_to_cpu(data); -+ #endif /* CONFIG_IFX_PCIE_HW_SWAP */ -+ } -+ else { -+ #ifdef CONFIG_IFX_PCIE1_HW_SWAP -+ data = le32_to_cpu(data); -+ #endif /* CONFIG_IFX_PCIE_HW_SWAP */ -+ } -+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd cfg, offset:%08x, data:%08x\n", __func__, addr, data); -+ -+ data = ifx_pcie_size_to_value(where, size, data, tvalue); -+ if (pcie_port == IFX_PCIE_PORT0) { -+ #ifdef CONFIG_IFX_PCIE_HW_SWAP -+ data = cpu_to_le32(data); -+ #endif /* CONFIG_IFX_PCIE_HW_SWAP */ -+ } -+ else { -+ #ifdef CONFIG_IFX_PCIE1_HW_SWAP -+ data = cpu_to_le32(data); -+ #endif /* CONFIG_IFX_PCIE_HW_SWAP */ -+ } -+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: wr cfg, offset:%08x, value:%08x\n", __func__, addr, data); -+ ifx_pcie_cfg_wr(pcie_port, addr, data); -+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: rd cfg, offset:%08x, value:%08x\n", -+ __func__, addr, ifx_pcie_cfg_rd(pcie_port, addr)); -+ } -+ PCIE_IRQ_UNLOCK(ifx_pcie_lock); -+out: -+ return ret; -+} -+ -+static struct resource ifx_pcie_io_resource = { -+ .name = "PCIe0 I/O space", -+ .start = PCIE_IO_PHY_BASE, -+ .end = PCIE_IO_PHY_END, -+ .flags = IORESOURCE_IO, -+}; -+ -+static struct resource ifx_pcie_mem_resource = { -+ .name = "PCIe0 Memory space", -+ .start = PCIE_MEM_PHY_BASE, -+ .end = PCIE_MEM_PHY_END, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct pci_ops ifx_pcie_ops = { -+ .read = ifx_pcie_read_config, -+ .write = ifx_pcie_write_config, -+}; -+ -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+static struct resource ifx_pcie1_io_resource = { -+ .name = "PCIe1 I/O space", -+ .start = PCIE1_IO_PHY_BASE, -+ .end = PCIE1_IO_PHY_END, -+ .flags = IORESOURCE_IO, -+}; -+ -+static struct resource ifx_pcie1_mem_resource = { -+ .name = "PCIe1 Memory space", -+ .start = PCIE1_MEM_PHY_BASE, -+ .end = PCIE1_MEM_PHY_END, -+ .flags = IORESOURCE_MEM, -+}; -+#endif /* CONFIG_IFX_PCIE_2ND_CORE */ -+ -+static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = { -+ { -+ .pcic = { -+ .pci_ops = &ifx_pcie_ops, -+ .mem_resource = &ifx_pcie_mem_resource, -+ .io_resource = &ifx_pcie_io_resource, -+ }, -+ .port = IFX_PCIE_PORT0, -+ }, -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+ { -+ .pcic = { -+ .pci_ops = &ifx_pcie_ops, -+ .mem_resource = &ifx_pcie1_mem_resource, -+ .io_resource = &ifx_pcie1_io_resource, -+ }, -+ .port = IFX_PCIE_PORT1, -+ }, -+#endif /* CONFIG_IFX_PCIE_2ND_CORE */ -+}; -+ -+#ifdef IFX_PCIE_ERROR_INT -+static INLINE void -+pcie_core_int_clear_all(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(PCIE_IRNCR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_ISR, "%s PCIE_IRNCR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_IRNCR(pcie_port))); -+ reg &= PCIE_RC_CORE_COMBINED_INT; -+ IFX_REG_W32(reg, PCIE_IRNCR(pcie_port)); -+} -+ -+static irqreturn_t -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -+pcie_rc_core_isr(int irq, void *dev_id) -+#else -+pcie_rc_core_isr(int irq, void *dev_id, struct pt_regs *regs) -+#endif -+{ -+ struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id; -+ int pcie_port = ctrl->port; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_ISR, "PCIe RC error intr %d\n", irq); -+ pcie_core_int_clear_all(pcie_port); -+ return IRQ_HANDLED; -+} -+ -+static int -+pcie_rc_core_int_init(int pcie_port) -+{ -+ int ret; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s enter \n", __func__); -+ -+ /* Enable core interrupt */ -+ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IRNEN: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_IRNEN(pcie_port))); -+ -+ /* Clear it first */ -+ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port)); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IRNCR: 0x%08x\n", -+ __func__, IFX_REG_R32(PCIE_IRNCR(pcie_port))); -+ ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, IRQF_DISABLED, -+ pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]); -+ if (ret) { -+ printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR); -+ } -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s exit \n", __func__); -+ -+ return ret; -+} -+#endif /* IFX_PCIE_ERROR_INT */ -+ -+/** -+ * \fn int ifx_pcie_bios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+ * \brief Map a PCI device to the appropriate interrupt line -+ * -+ * \param[in] dev The Linux PCI device structure for the device to map -+ * \param[in] slot The slot number for this device on __BUS 0__. Linux -+ * enumerates through all the bridges and figures out the -+ * slot on Bus 0 where this device eventually hooks to. -+ * \param[in] pin The PCI interrupt pin read from the device, then swizzled -+ * as it goes through each bridge. -+ * \return Interrupt number for the device -+ * \ingroup IFX_PCIE_OS -+ */ -+int -+ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ u32 irq_bit = 0; -+ int irq = 0; -+ struct ifx_pci_controller *ctrl = dev->bus->sysdata; -+ int pcie_port = ctrl->port; -+ -+ printk("%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin); -+ -+ if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) { -+ printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin); -+ return -1; -+ } -+ /* Pin index so minus one */ -+ irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit; -+ irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq; -+ IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port)); -+// printk("%s PCIE_IRNEN: 0x%08x\n", __func__, IFX_REG_R32(PCIE_IRNEN(pcie_port))); -+ IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port)); -+ // printk("%s PCIE_IRNCR: 0x%08x\n", __func__, IFX_REG_R32(PCIE_IRNCR(pcie_port))); -+ printk("%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq); -+// printk("%s dev %s: exit\n", __func__, pci_name(dev)); -+ return irq; -+} -+ -+/** -+ * \fn int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev) -+ * \brief Called to perform platform specific PCI setup -+ * -+ * \param[in] dev The Linux PCI device structure for the device to map -+ * \return OK -+ * \ingroup IFX_PCIE_OS -+ */ -+int -+ifx_pcie_bios_plat_dev_init(struct pci_dev *dev) -+{ -+ u16 config; -+#ifdef IFX_PCIE_ERROR_INT -+ u32 dconfig; -+ int pos; -+#endif /* IFX_PCIE_ERROR_INT */ -+ -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s enter \n", __func__); -+ /* Enable reporting System errors and parity errors on all devices */ -+ /* Enable parity checking and error reporting */ -+ pci_read_config_word(dev, PCI_COMMAND, &config); -+ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE | -+ PCI_COMMAND_FAST_BACK*/; -+ pci_write_config_word(dev, PCI_COMMAND, config); -+ -+ if (dev->subordinate) { -+ /* Set latency timers on sub bridges */ -+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */ -+ /* More bridge error detection */ -+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); -+ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; -+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); -+ } -+#ifdef IFX_PCIE_ERROR_INT -+ /* Enable the PCIe normal error reporting */ -+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP); -+ if (pos) { -+ -+ /* Disable system error generation in response to error messages */ -+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config); -+ config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE); -+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config); -+ -+ /* Clear PCIE Capability's Device Status */ -+ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config); -+ pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config); -+ -+ /* Update Device Control */ -+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); -+ /* Correctable Error Reporting */ -+ config |= PCI_EXP_DEVCTL_CERE; -+ /* Non-Fatal Error Reporting */ -+ config |= PCI_EXP_DEVCTL_NFERE; -+ /* Fatal Error Reporting */ -+ config |= PCI_EXP_DEVCTL_FERE; -+ /* Unsupported Request */ -+ config |= PCI_EXP_DEVCTL_URRE; -+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); -+ } -+ -+ /* Find the Advanced Error Reporting capability */ -+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); -+ if (pos) { -+ /* Clear Uncorrectable Error Status */ -+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig); -+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig); -+ /* Enable reporting of all uncorrectable errors */ -+ /* Uncorrectable Error Mask - turned on bits disable errors */ -+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); -+ /* -+ * Leave severity at HW default. This only controls if -+ * errors are reported as uncorrectable or -+ * correctable, not if the error is reported. -+ */ -+ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ -+ /* Clear Correctable Error Status */ -+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); -+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); -+ /* Enable reporting of all correctable errors */ -+ /* Correctable Error Mask - turned on bits disable errors */ -+ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); -+ /* Advanced Error Capabilities */ -+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); -+ /* ECRC Generation Enable */ -+ if (dconfig & PCI_ERR_CAP_ECRC_GENC) { -+ dconfig |= PCI_ERR_CAP_ECRC_GENE; -+ } -+ /* ECRC Check Enable */ -+ if (dconfig & PCI_ERR_CAP_ECRC_CHKC) { -+ dconfig |= PCI_ERR_CAP_ECRC_CHKE; -+ } -+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); -+ -+ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ -+ /* Enable Root Port's interrupt in response to error messages */ -+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, -+ PCI_ERR_ROOT_CMD_COR_EN | -+ PCI_ERR_ROOT_CMD_NONFATAL_EN | -+ PCI_ERR_ROOT_CMD_FATAL_EN); -+ /* Clear the Root status register */ -+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); -+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); -+ } -+#endif /* IFX_PCIE_ERROR_INT */ -+ /* WAR, only 128 MRRS is supported, force all EPs to support this value */ -+ pcie_set_readrq(dev, 128); -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s exit \n", __func__); -+ return 0; -+} -+ -+static void -+pcie_phy_rst(int pcie_port) -+{ -+ pcie_phy_rst_assert(pcie_port); -+ pcie_phy_rst_deassert(pcie_port); -+ -+ /* Make sure PHY PLL is stable */ -+ udelay(20); -+} -+ -+static int -+pcie_rc_initialize(int pcie_port) -+{ -+ int i; -+#define IFX_PCIE_PHY_LOOP_CNT 5 -+ -+ pcie_rcu_endian_setup(pcie_port); -+ -+ pcie_ep_gpio_rst_init(pcie_port); -+ -+ /* -+ * XXX, PCIe elastic buffer bug will cause not to be detected. One more -+ * reset PCIe PHY will solve this issue -+ */ -+ for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) { -+ /* Disable PCIe PHY Analog part for sanity check */ -+ pcie_phy_pmu_disable(pcie_port); -+ -+ pcie_phy_rst(pcie_port); -+ -+ /* PCIe Core reset enabled, low active, sw programmed */ -+ pcie_core_rst_assert(pcie_port); -+ -+ /* Put PCIe EP in reset status */ -+ pcie_device_rst_assert(pcie_port); -+ -+ /* PCI PHY & Core reset disabled, high active, sw programmed */ -+ pcie_core_rst_deassert(pcie_port); -+ -+ /* Already in a quiet state, program PLL, enable PHY, check ready bit */ -+ pcie_phy_clock_mode_setup(pcie_port); -+ -+ /* Enable PCIe PHY and Clock */ -+ pcie_core_pmu_setup(pcie_port); -+ -+ /* Clear status registers */ -+ pcie_status_register_clear(pcie_port); -+ -+ #ifdef CONFIG_PCI_MSI -+ pcie_msi_init(pcie_port); -+ #endif /* CONFIG_PCI_MSI */ -+ pcie_rc_cfg_reg_setup(pcie_port); -+ -+ /* Once link is up, break out */ -+ if (pcie_app_loigc_setup(pcie_port) == 0) { -+ break; -+ } -+ } -+ if (i >= IFX_PCIE_PHY_LOOP_CNT) { -+ printk(KERN_ERR "%s link up failed!!!!!\n", __func__); -+ return -EIO; -+ } -+ /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */ -+ pcie_replay_time_update(pcie_port); -+#ifdef IFX_PCIE_DBG -+ pcie_post_dump(pcie_port); -+ pcie_status_registers_dump(pcie_port); -+#endif /* IFX_PCIE_DBG */ -+ return 0; -+} -+ -+static int inline -+ifx_pcie_startup_port_nr(void) -+{ -+ int pcie_port = IFX_PCIE_PORT0; -+ -+#if defined (CONFIG_IFX_PCIE_1ST_CORE) && defined (CONFIG_IFX_PCIE_2ND_CORE) -+ pcie_port = IFX_PCIE_PORT0; -+#elif defined (CONFIG_IFX_PCIE_1ST_CORE) -+ pcie_port = IFX_PCIE_PORT0; -+#elif defined (CONFIG_IFX_PCIE_2ND_CORE) -+ pcie_port = IFX_PCIE_PORT1; -+#else -+ #error "Please choose valid PCIe Core" -+#endif -+ return pcie_port; -+} -+ -+/** -+ * \fn static int __init ifx_pcie_bios_init(void) -+ * \brief Initialize the IFX PCIe controllers -+ * -+ * \return -EIO PCIe PHY link is not up -+ * \return -ENOMEM Configuration/IO space failed to map -+ * \return 0 OK -+ * \ingroup IFX_PCIE_OS -+ */ -+extern int (*ltq_pci_plat_arch_init)(struct pci_dev *dev); -+extern int (*ltq_pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); -+ -+static int __init -+ifx_pcie_bios_init(void) -+{ -+ char ver_str[128] = {0}; -+ void __iomem *io_map_base; -+ int pcie_port; -+ int startup_port; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s enter \n", __func__); -+ -+ ltq_pci_map_irq = ifx_pcie_bios_map_irq; -+ ltq_pci_plat_arch_init = ifx_pcie_bios_plat_dev_init; -+ -+ /* Enable AHB Master/ Slave */ -+ pcie_ahb_pmu_setup(); -+ -+ startup_port = ifx_pcie_startup_port_nr(); -+ -+ for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){ -+ if (pcie_rc_initialize(pcie_port) == 0) { -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", -+ __func__, PCIE_CFG_PORT_TO_BASE(pcie_port)); -+ /* Otherwise, warning will pop up */ -+ io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE); -+ if (io_map_base == NULL) { -+ IFX_PCIE_PRINT(PCIE_MSG_ERR, "%s io space ioremap failed\n", __func__); -+ return -ENOMEM; -+ } -+ ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base; -+ -+ register_pci_controller(&ifx_pcie_controller[pcie_port].pcic); -+ /* XXX, clear error status */ -+ -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: mem_resource 0x%p, io_resource 0x%p\n", -+ __func__, &ifx_pcie_controller[pcie_port].pcic.mem_resource, -+ &ifx_pcie_controller[pcie_port].pcic.io_resource); -+ -+ #ifdef IFX_PCIE_ERROR_INT -+ pcie_rc_core_int_init(pcie_port); -+ #endif /* IFX_PCIE_ERROR_INT */ -+ } -+ } -+#ifdef CONFIG_IFX_PMCU -+ ifx_pcie_pmcu_init(); -+#endif /* CONFIG_IFX_PMCU */ -+ -+ sprintf(ver_str, "PCIe Root Complex %d.%d.%d", IFX_PCIE_VER_MAJOR, IFX_PCIE_VER_MID, IFX_PCIE_VER_MINOR); -+ printk(KERN_INFO "%s", ver_str); -+ return 0; -+#undef IFX_PCIE_PHY_LOOP_CNT -+} -+arch_initcall(ifx_pcie_bios_init); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Chuanhua.Lei@infineon.com"); -+MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module"); -+MODULE_DESCRIPTION("Infineon builtin PCIe RC driver"); -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie.h -@@ -0,0 +1,135 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie.h -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCIe module -+** -+** DATE : 02 Mar 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+#ifndef IFXMIPS_PCIE_H -+#define IFXMIPS_PCIE_H -+#include -+#include -+#include -+#include -+#include "ifxmips_pci_common.h" -+#include "ifxmips_pcie_reg.h" -+ -+/*! -+ \defgroup IFX_PCIE PCI Express bus driver module -+ \brief PCI Express IP module support VRX200 -+*/ -+ -+/*! -+ \defgroup IFX_PCIE_OS OS APIs -+ \ingroup IFX_PCIE -+ \brief PCIe bus driver OS interface functions -+*/ -+ -+/*! -+ \file ifxmips_pcie.h -+ \ingroup IFX_PCIE -+ \brief header file for PCIe module common header file -+*/ -+#define PCIE_IRQ_LOCK(lock) do { \ -+ unsigned long flags; \ -+ spin_lock_irqsave(&(lock), flags); -+#define PCIE_IRQ_UNLOCK(lock) \ -+ spin_unlock_irqrestore(&(lock), flags); \ -+} while (0) -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) -+#define IRQF_SHARED SA_SHIRQ -+#endif -+ -+#define PCIE_MSG_MSI 0x00000001 -+#define PCIE_MSG_ISR 0x00000002 -+#define PCIE_MSG_FIXUP 0x00000004 -+#define PCIE_MSG_READ_CFG 0x00000008 -+#define PCIE_MSG_WRITE_CFG 0x00000010 -+#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG) -+#define PCIE_MSG_REG 0x00000020 -+#define PCIE_MSG_INIT 0x00000040 -+#define PCIE_MSG_ERR 0x00000080 -+#define PCIE_MSG_PHY 0x00000100 -+#define PCIE_MSG_ANY 0x000001ff -+ -+#define IFX_PCIE_PORT0 0 -+#define IFX_PCIE_PORT1 1 -+ -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+#define IFX_PCIE_CORE_NR 2 -+#else -+#define IFX_PCIE_CORE_NR 1 -+#endif -+ -+#define IFX_PCIE_ERROR_INT -+ -+//#define IFX_PCIE_DBG -+ -+#if defined(IFX_PCIE_DBG) -+#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \ -+ ifx_pcie_debug((_fmt), ##args); \ -+} while (0) -+ -+#define INLINE -+#else -+#define IFX_PCIE_PRINT(_m, _fmt, args...) \ -+ do {} while(0) -+#define INLINE inline -+#endif -+ -+struct ifx_pci_controller { -+ struct pci_controller pcic; -+ -+ /* RC specific, per host bus information */ -+ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */ -+}; -+ -+typedef struct ifx_pcie_ir_irq { -+ const unsigned int irq; -+ const char name[16]; -+}ifx_pcie_ir_irq_t; -+ -+typedef struct ifx_pcie_legacy_irq{ -+ const u32 irq_bit; -+ const int irq; -+}ifx_pcie_legacy_irq_t; -+ -+typedef struct ifx_pcie_irq { -+ ifx_pcie_ir_irq_t ir_irq; -+ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX]; -+}ifx_pcie_irq_t; -+ -+extern u32 g_pcie_debug_flag; -+extern void ifx_pcie_debug(const char *fmt, ...); -+extern void pcie_phy_clock_mode_setup(int pcie_port); -+extern void pcie_msi_pic_init(int pcie_port); -+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value); -+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value); -+ -+#define CONFIG_VR9 -+ -+#ifdef CONFIG_VR9 -+#include "ifxmips_pcie_vr9.h" -+#elif defined (CONFIG_AR10) -+#include "ifxmips_pcie_ar10.h" -+#else -+#error "PCIE: platform not defined" -+#endif /* CONFIG_VR9 */ -+ -+#endif /* IFXMIPS_PCIE_H */ -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_ar10.h -@@ -0,0 +1,290 @@ -+/**************************************************************************** -+ Copyright (c) 2010 -+ Lantiq Deutschland GmbH -+ Am Campeon 3; 85579 Neubiberg, Germany -+ -+ For licensing information, see the file 'LICENSE' in the root folder of -+ this software module. -+ -+ *****************************************************************************/ -+/*! -+ \file ifxmips_pcie_ar10.h -+ \ingroup IFX_PCIE -+ \brief PCIe RC driver ar10 specific file -+*/ -+ -+#ifndef IFXMIPS_PCIE_AR10_H -+#define IFXMIPS_PCIE_AR10_H -+#ifndef AUTOCONF_INCLUDED -+#include -+#endif /* AUTOCONF_INCLUDED */ -+#include -+#include -+ -+/* Project header file */ -+#include -+#include -+#include -+#include -+ -+static inline void pcie_ep_gpio_rst_init(int pcie_port) -+{ -+ ifx_ebu_led_enable(); -+ if (pcie_port == 0) { -+ ifx_ebu_led_set_data(11, 1); -+ } -+ else { -+ ifx_ebu_led_set_data(12, 1); -+ } -+} -+ -+static inline void pcie_ahb_pmu_setup(void) -+{ -+ /* XXX, moved to CGU to control AHBM */ -+} -+ -+static inline void pcie_rcu_endian_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); -+ /* Inbound, big endian */ -+ reg |= IFX_RCU_BE_AHB4S; -+ if (pcie_port == 0) { -+ reg |= IFX_RCU_BE_PCIE0M; -+ -+ #ifdef CONFIG_IFX_PCIE_HW_SWAP -+ /* Outbound, software swap needed */ -+ reg |= IFX_RCU_BE_AHB3M; -+ reg &= ~IFX_RCU_BE_PCIE0S; -+ #else -+ /* Outbound little endian */ -+ reg &= ~IFX_RCU_BE_AHB3M; -+ reg &= ~IFX_RCU_BE_PCIE0S; -+ #endif -+ } -+ else { -+ reg |= IFX_RCU_BE_PCIE1M; -+ #ifdef CONFIG_IFX_PCIE1_HW_SWAP -+ /* Outbound, software swap needed */ -+ reg |= IFX_RCU_BE_AHB3M; -+ reg &= ~IFX_RCU_BE_PCIE1S; -+ #else -+ /* Outbound little endian */ -+ reg &= ~IFX_RCU_BE_AHB3M; -+ reg &= ~IFX_RCU_BE_PCIE1S; -+ #endif -+ } -+ -+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); -+} -+ -+static inline void pcie_phy_pmu_enable(int pcie_port) -+{ -+ if (pcie_port == 0) { /* XXX, should use macro*/ -+ PCIE0_PHY_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+ else { -+ PCIE1_PHY_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+} -+ -+static inline void pcie_phy_pmu_disable(int pcie_port) -+{ -+ if (pcie_port == 0) { /* XXX, should use macro*/ -+ PCIE0_PHY_PMU_SETUP(IFX_PMU_DISABLE); -+ } -+ else { -+ PCIE1_PHY_PMU_SETUP(IFX_PMU_DISABLE); -+ } -+} -+ -+static inline void pcie_pdi_big_endian(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); -+ if (pcie_port == 0) { -+ /* Config AHB->PCIe and PDI endianness */ -+ reg |= IFX_RCU_BE_PCIE0_PDI; -+ } -+ else { -+ /* Config AHB->PCIe and PDI endianness */ -+ reg |= IFX_RCU_BE_PCIE1_PDI; -+ } -+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); -+} -+ -+static inline void pcie_pdi_pmu_enable(int pcie_port) -+{ -+ if (pcie_port == 0) { -+ /* Enable PDI to access PCIe PHY register */ -+ PDI0_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+ else { -+ PDI1_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+} -+ -+static inline void pcie_core_rst_assert(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ -+ /* Reset Core, bit 22 */ -+ if (pcie_port == 0) { -+ reg |= 0x00400000; -+ } -+ else { -+ reg |= 0x08000000; /* Bit 27 */ -+ } -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_core_rst_deassert(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Make sure one micro-second delay */ -+ udelay(1); -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ if (pcie_port == 0) { -+ reg &= ~0x00400000; /* bit 22 */ -+ } -+ else { -+ reg &= ~0x08000000; /* Bit 27 */ -+ } -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_phy_rst_assert(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ if (pcie_port == 0) { -+ reg |= 0x00001000; /* Bit 12 */ -+ } -+ else { -+ reg |= 0x00002000; /* Bit 13 */ -+ } -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_phy_rst_deassert(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Make sure one micro-second delay */ -+ udelay(1); -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ if (pcie_port == 0) { -+ reg &= ~0x00001000; /* Bit 12 */ -+ } -+ else { -+ reg &= ~0x00002000; /* Bit 13 */ -+ } -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_device_rst_assert(int pcie_port) -+{ -+ if (pcie_port == 0) { -+ ifx_ebu_led_set_data(11, 0); -+ } -+ else { -+ ifx_ebu_led_set_data(12, 0); -+ } -+} -+ -+static inline void pcie_device_rst_deassert(int pcie_port) -+{ -+ mdelay(100); -+ if (pcie_port == 0) { -+ ifx_ebu_led_set_data(11, 1); -+ } -+ else { -+ ifx_ebu_led_set_data(12, 1); -+ } -+ ifx_ebu_led_disable(); -+} -+ -+static inline void pcie_core_pmu_setup(int pcie_port) -+{ -+ if (pcie_port == 0) { -+ PCIE0_CTRL_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+ else { -+ PCIE1_CTRL_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+} -+ -+static inline void pcie_msi_init(int pcie_port) -+{ -+ pcie_msi_pic_init(pcie_port); -+ if (pcie_port == 0) { -+ MSI0_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+ else { -+ MSI1_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+} -+ -+static inline u32 -+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) -+{ -+ u32 tbus_number = bus_number; -+ -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ -+ if (pcibios_host_nr() > 1) { -+ tbus_number -= pcibios_1st_host_bus_nr(); -+ } -+ } -+#endif /* CONFIG_IFX_PCI */ -+ return tbus_number; -+} -+ -+static inline u32 -+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) -+{ -+ struct pci_dev *pdev; -+ u32 tvalue = value; -+ -+ /* Sanity check */ -+ pdev = pci_get_slot(bus, devfn); -+ if (pdev == NULL) { -+ return tvalue; -+ } -+ -+ /* Only care about PCI bridge */ -+ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { -+ return tvalue; -+ } -+ -+ if (read) { /* Read hack */ -+ #ifdef CONFIG_IFX_PCIE_2ND_CORE -+ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ -+ if (pcibios_host_nr() > 1) { -+ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); -+ } -+ } -+ #endif /* CONFIG_IFX_PCIE_2ND_CORE */ -+ } -+ else { /* Write hack */ -+ #ifdef CONFIG_IFX_PCIE_2ND_CORE -+ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ -+ if (pcibios_host_nr() > 1) { -+ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); -+ } -+ } -+ #endif -+ } -+ return tvalue; -+} -+ -+#endif /* IFXMIPS_PCIE_AR10_H */ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_msi.c -@@ -0,0 +1,392 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_msi.c -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCI MSI sub module -+** -+** DATE : 02 Mar 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe MSI Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Date $Author $Comment -+** 02 Mar,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+/*! -+ \defgroup IFX_PCIE_MSI MSI OS APIs -+ \ingroup IFX_PCIE -+ \brief PCIe bus driver OS interface functions -+*/ -+ -+/*! -+ \file ifxmips_pcie_msi.c -+ \ingroup IFX_PCIE -+ \brief PCIe MSI OS interface file -+*/ -+ -+#ifndef AUTOCONF_INCLUDED -+#include -+#endif /* AUTOCONF_INCLUDED */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "ifxmips_pcie_reg.h" -+#include "ifxmips_pcie.h" -+ -+#define IFX_MSI_IRQ_NUM 16 -+ -+enum { -+ IFX_PCIE_MSI_IDX0 = 0, -+ IFX_PCIE_MSI_IDX1, -+ IFX_PCIE_MSI_IDX2, -+ IFX_PCIE_MSI_IDX3, -+}; -+ -+typedef struct ifx_msi_irq_idx { -+ const int irq; -+ const int idx; -+}ifx_msi_irq_idx_t; -+ -+struct ifx_msi_pic { -+ volatile u32 pic_table[IFX_MSI_IRQ_NUM]; -+ volatile u32 pic_endian; /* 0x40 */ -+}; -+typedef struct ifx_msi_pic *ifx_msi_pic_t; -+ -+typedef struct ifx_msi_irq { -+ const volatile ifx_msi_pic_t msi_pic_p; -+ const u32 msi_phy_base; -+ const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM]; -+ /* -+ * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is -+ * in use. -+ */ -+ u16 msi_free_irq_bitmask; -+ -+ /* -+ * Each bit in msi_multiple_irq_bitmask tells that the device using -+ * this bit in msi_free_irq_bitmask is also using the next bit. This -+ * is used so we can disable all of the MSI interrupts when a device -+ * uses multiple. -+ */ -+ u16 msi_multiple_irq_bitmask; -+}ifx_msi_irq_t; -+ -+static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = { -+ { -+ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE, -+ .msi_phy_base = PCIE_MSI_PHY_BASE, -+ .msi_irq_idx = { -+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ }, -+ .msi_free_irq_bitmask = 0, -+ .msi_multiple_irq_bitmask= 0, -+ }, -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+ { -+ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE, -+ .msi_phy_base = PCIE1_MSI_PHY_BASE, -+ .msi_irq_idx = { -+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ }, -+ .msi_free_irq_bitmask = 0, -+ .msi_multiple_irq_bitmask= 0, -+ -+ }, -+#endif /* CONFIG_IFX_PCIE_2ND_CORE */ -+}; -+ -+/* -+ * This lock controls updates to msi_free_irq_bitmask, -+ * msi_multiple_irq_bitmask and pic register settting -+ */ -+static DEFINE_SPINLOCK(ifx_pcie_msi_lock); -+ -+void pcie_msi_pic_init(int pcie_port) -+{ -+ spin_lock(&ifx_pcie_msi_lock); -+ msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN; -+ spin_unlock(&ifx_pcie_msi_lock); -+} -+ -+/** -+ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) -+ * \brief Called when a driver request MSI interrupts instead of the -+ * legacy INT A-D. This routine will allocate multiple interrupts -+ * for MSI devices that support them. A device can override this by -+ * programming the MSI control bits [6:4] before calling -+ * pci_enable_msi(). -+ * -+ * \param[in] pdev Device requesting MSI interrupts -+ * \param[in] desc MSI descriptor -+ * -+ * \return -EINVAL Invalid pcie root port or invalid msi bit -+ * \return 0 OK -+ * \ingroup IFX_PCIE_MSI -+ */ -+int -+arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) -+{ -+ int irq, pos; -+ u16 control; -+ int irq_idx; -+ int irq_step; -+ int configured_private_bits; -+ int request_private_bits; -+ struct msi_msg msg; -+ u16 search_mask; -+ struct ifx_pci_controller *ctrl = pdev->bus->sysdata; -+ int pcie_port = ctrl->port; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev)); -+ -+ /* XXX, skip RC MSI itself */ -+ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) { -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__); -+ return -EINVAL; -+ } -+ -+ /* -+ * Read the MSI config to figure out how many IRQs this device -+ * wants. Most devices only want 1, which will give -+ * configured_private_bits and request_private_bits equal 0. -+ */ -+ pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control); -+ -+ /* -+ * If the number of private bits has been configured then use -+ * that value instead of the requested number. This gives the -+ * driver the chance to override the number of interrupts -+ * before calling pci_enable_msi(). -+ */ -+ configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; -+ if (configured_private_bits == 0) { -+ /* Nothing is configured, so use the hardware requested size */ -+ request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; -+ } -+ else { -+ /* -+ * Use the number of configured bits, assuming the -+ * driver wanted to override the hardware request -+ * value. -+ */ -+ request_private_bits = configured_private_bits; -+ } -+ -+ /* -+ * The PCI 2.3 spec mandates that there are at most 32 -+ * interrupts. If this device asks for more, only give it one. -+ */ -+ if (request_private_bits > 5) { -+ request_private_bits = 0; -+ } -+again: -+ /* -+ * The IRQs have to be aligned on a power of two based on the -+ * number being requested. -+ */ -+ irq_step = (1 << request_private_bits); -+ -+ /* Mask with one bit for each IRQ */ -+ search_mask = (1 << irq_step) - 1; -+ -+ /* -+ * We're going to search msi_free_irq_bitmask_lock for zero -+ * bits. This represents an MSI interrupt number that isn't in -+ * use. -+ */ -+ spin_lock(&ifx_pcie_msi_lock); -+ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) { -+ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) { -+ msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; -+ msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos; -+ break; -+ } -+ } -+ spin_unlock(&ifx_pcie_msi_lock); -+ -+ /* Make sure the search for available interrupts didn't fail */ -+ if (pos >= IFX_MSI_IRQ_NUM) { -+ if (request_private_bits) { -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free " -+ "interrupts, trying just one", __func__, 1 << request_private_bits); -+ request_private_bits = 0; -+ goto again; -+ } -+ else { -+ printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__); -+ return -EINVAL; -+ } -+ } -+ irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq; -+ irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx); -+ -+ /* -+ * Initialize MSI. This has to match the memory-write endianess from the device -+ * Address bits [23:12] -+ */ -+ spin_lock(&ifx_pcie_msi_lock); -+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) | -+ SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) | -+ SM((1 << pos), IFX_MSI_PIC_MSG_DATA); -+ -+ /* Enable this entry */ -+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE; -+ spin_unlock(&ifx_pcie_msi_lock); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n", -+ pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]); -+ -+ /* Update the number of IRQs the device has available to it */ -+ control &= ~PCI_MSI_FLAGS_QSIZE; -+ control |= (request_private_bits << 4); -+ pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control); -+ -+ set_irq_msi(irq, desc); -+ msg.address_hi = 0x0; -+ msg.address_lo = msi_irqs[pcie_port].msi_phy_base; -+ msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA); -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data); -+ -+ write_msi_msg(irq, &msg); -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); -+ return 0; -+} -+ -+static int -+pcie_msi_irq_to_port(unsigned int irq, int *port) -+{ -+ int ret = 0; -+ -+ if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 || -+ irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) { -+ *port = IFX_PCIE_PORT0; -+ } -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+ else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 || -+ irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) { -+ *port = IFX_PCIE_PORT1; -+ } -+#endif /* CONFIG_IFX_PCIE_2ND_CORE */ -+ else { -+ printk(KERN_ERR "%s: Attempted to teardown illegal " -+ "MSI interrupt (%d)\n", __func__, irq); -+ ret = -EINVAL; -+ } -+ return ret; -+} -+ -+/** -+ * \fn void arch_teardown_msi_irq(unsigned int irq) -+ * \brief Called when a device no longer needs its MSI interrupts. All -+ * MSI interrupts for the device are freed. -+ * -+ * \param irq The devices first irq number. There may be multple in sequence. -+ * \return none -+ * \ingroup IFX_PCIE_MSI -+ */ -+void -+arch_teardown_msi_irq(unsigned int irq) -+{ -+ int pos; -+ int number_irqs; -+ u16 bitmask; -+ int pcie_port; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__); -+ -+ BUG_ON(irq > INT_NUM_IM4_IRL31); -+ -+ if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) { -+ return; -+ } -+ -+ /* Shift the mask to the correct bit location, not always correct -+ * Probally, the first match will be chosen. -+ */ -+ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) { -+ if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) -+ && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) { -+ break; -+ } -+ } -+ if (pos >= IFX_MSI_IRQ_NUM) { -+ printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__); -+ return; -+ } -+ spin_lock(&ifx_pcie_msi_lock); -+ /* Disable this entry */ -+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE; -+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA); -+ spin_unlock(&ifx_pcie_msi_lock); -+ /* -+ * Count the number of IRQs we need to free by looking at the -+ * msi_multiple_irq_bitmask. Each bit set means that the next -+ * IRQ is also owned by this device. -+ */ -+ number_irqs = 0; -+ while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && -+ (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) { -+ number_irqs++; -+ } -+ number_irqs++; -+ -+ /* Mask with one bit for each IRQ */ -+ bitmask = (1 << number_irqs) - 1; -+ -+ bitmask <<= pos; -+ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) { -+ printk(KERN_ERR "%s: Attempted to teardown MSI " -+ "interrupt (%d) not in use\n", __func__, irq); -+ return; -+ } -+ /* Checks are done, update the in use bitmask */ -+ spin_lock(&ifx_pcie_msi_lock); -+ msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask; -+ msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1); -+ spin_unlock(&ifx_pcie_msi_lock); -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); -+} -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Chuanhua.Lei@infineon.com"); -+MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module"); -+MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver"); -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_phy.c -@@ -0,0 +1,478 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_phy.c -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCIe PHY sub module -+** -+** DATE : 14 May 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 14 May,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+/*! -+ \file ifxmips_pcie_phy.c -+ \ingroup IFX_PCIE -+ \brief PCIe PHY PLL register programming source file -+*/ -+#include -+#include -+#include -+#include -+ -+#include "ifxmips_pcie_reg.h" -+#include "ifxmips_pcie.h" -+ -+/* PCIe PDI only supports 16 bit operation */ -+ -+#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \ -+ ((*(volatile u16 *) (__addr)) = (__data)) -+ -+#define IFX_PCIE_PHY_REG_READ16(__addr) \ -+ (*(volatile u16 *) (__addr)) -+ -+#define IFX_PCIE_PHY_REG16(__addr) \ -+ (*(volatile u16 *) (__addr)) -+ -+#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \ -+ u16 read_data; \ -+ u16 write_data; \ -+ read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \ -+ write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\ -+ IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \ -+} while (0) -+ -+#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */ -+ -+//#define IFX_PCI_PHY_REG_DUMP -+ -+#ifdef IFX_PCI_PHY_REG_DUMP -+static void -+pcie_phy_reg_dump(int pcie_port) -+{ -+ printk("PLL REGFILE\n"); -+ printk("PCIE_PHY_PLL_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL1(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL2(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL3(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL4 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL4(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL5 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL5(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL6 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL6(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL7 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL7(pcie_port))); -+ printk("PCIE_PHY_PLL_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL1(pcie_port))); -+ printk("PCIE_PHY_PLL_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL2(pcie_port))); -+ printk("PCIE_PHY_PLL_A_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL3(pcie_port))); -+ printk("PCIE_PHY_PLL_STATUS 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port))); -+ -+ printk("TX1 REGFILE\n"); -+ printk("PCIE_PHY_TX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL1(pcie_port))); -+ printk("PCIE_PHY_TX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL2(pcie_port))); -+ printk("PCIE_PHY_TX1_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL3(pcie_port))); -+ printk("PCIE_PHY_TX1_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL1(pcie_port))); -+ printk("PCIE_PHY_TX1_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL2(pcie_port))); -+ printk("PCIE_PHY_TX1_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD1(pcie_port))); -+ printk("PCIE_PHY_TX1_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD2(pcie_port))); -+ printk("PCIE_PHY_TX1_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD3(pcie_port))); -+ -+ printk("TX2 REGFILE\n"); -+ printk("PCIE_PHY_TX2_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL1(pcie_port))); -+ printk("PCIE_PHY_TX2_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL2(pcie_port))); -+ printk("PCIE_PHY_TX2_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL1(pcie_port))); -+ printk("PCIE_PHY_TX2_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL2(pcie_port))); -+ printk("PCIE_PHY_TX2_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD1(pcie_port))); -+ printk("PCIE_PHY_TX2_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD2(pcie_port))); -+ printk("PCIE_PHY_TX2_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD3(pcie_port))); -+ -+ printk("RX1 REGFILE\n"); -+ printk("PCIE_PHY_RX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL1(pcie_port))); -+ printk("PCIE_PHY_RX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL2(pcie_port))); -+ printk("PCIE_PHY_RX1_CDR 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CDR(pcie_port))); -+ printk("PCIE_PHY_RX1_EI 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_EI(pcie_port))); -+ printk("PCIE_PHY_RX1_A_CTRL 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_A_CTRL(pcie_port))); -+} -+#endif /* IFX_PCI_PHY_REG_DUMP */ -+ -+static void -+pcie_phy_comm_setup(int pcie_port) -+{ -+ /* PLL Setting */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); -+ -+ /* increase the bias reference voltage */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); -+ -+ /* Endcnt */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); -+ -+ /* force */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); -+ -+ /* predrv_ser_en */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); -+ -+ /* ctrl_lim */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); -+ -+ /* ctrl */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); -+ -+ /* predrv_ser_en */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); -+ -+ /* RTERM*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); -+ -+ /* Improved 100MHz clock output */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); -+ -+ /* Reduced CDR BW to avoid glitches */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); -+} -+ -+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE -+static void -+pcie_phy_36mhz_mode_setup(int pcie_port) -+{ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); -+#ifdef IFX_PCI_PHY_REG_DUMP -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); -+ pcie_phy_reg_dump(pcie_port); -+#endif -+ -+ /* en_ext_mmd_div_ratio */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); -+ -+ /* ext_mmd_div_ratio*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); -+ -+ /* pll_ensdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); -+ -+ /* en_const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); -+ -+ /* mmd */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); -+ -+ /* lf_mode */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); -+ -+ /* const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); -+ -+ /* const sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); -+ -+ /* pllmod */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); -+} -+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ -+ -+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE -+static void -+pcie_phy_36mhz_ssc_mode_setup(int pcie_port) -+{ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); -+#ifdef IFX_PCI_PHY_REG_DUMP -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); -+ pcie_phy_reg_dump(pcie_port); -+#endif -+ -+ /* PLL Setting */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); -+ -+ /* Increase the bias reference voltage */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); -+ -+ /* Endcnt */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); -+ -+ /* Force */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); -+ -+ /* Predrv_ser_en */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); -+ -+ /* ctrl_lim */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); -+ -+ /* ctrl */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); -+ -+ /* predrv_ser_en */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); -+ -+ /* RTERM*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); -+ -+ /* en_ext_mmd_div_ratio */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); -+ -+ /* ext_mmd_div_ratio*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); -+ -+ /* pll_ensdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400); -+ -+ /* en_const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); -+ -+ /* mmd */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); -+ -+ /* lf_mode */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); -+ -+ /* const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); -+ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100); -+ /* const sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); -+ -+ /* pllmod */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF); -+ -+ /* improved 100MHz clock output */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); -+ -+ /* reduced CDR BW to avoid glitches */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); -+} -+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */ -+ -+#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE -+static void -+pcie_phy_25mhz_mode_setup(int pcie_port) -+{ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); -+#ifdef IFX_PCI_PHY_REG_DUMP -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); -+ pcie_phy_reg_dump(pcie_port); -+#endif -+ /* en_const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); -+ -+ /* pll_ensdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200); -+ -+ /* en_ext_mmd_div_ratio*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002); -+ -+ /* ext_mmd_div_ratio*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070); -+ -+ /* mmd */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000); -+ -+ /* lf_mode */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); -+} -+#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */ -+ -+#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE -+static void -+pcie_phy_100mhz_mode_setup(int pcie_port) -+{ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); -+#ifdef IFX_PCI_PHY_REG_DUMP -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); -+ pcie_phy_reg_dump(pcie_port); -+#endif -+ /* en_ext_mmd_div_ratio */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); -+ -+ /* ext_mmd_div_ratio*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); -+ -+ /* pll_ensdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); -+ -+ /* en_const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); -+ -+ /* mmd */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); -+ -+ /* lf_mode */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); -+ -+ /* const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); -+ -+ /* const sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); -+ -+ /* pllmod */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); -+} -+#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */ -+ -+static int -+pcie_phy_wait_startup_ready(int pcie_port) -+{ -+ int i; -+ -+ for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) { -+ if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) { -+ break; -+ } -+ udelay(10); -+ } -+ if (i >= IFX_PCIE_PLL_TIMEOUT) { -+ printk(KERN_ERR "%s PLL Link timeout\n", __func__); -+ return -1; -+ } -+ return 0; -+} -+ -+static void -+pcie_phy_load_enable(int pcie_port, int slice) -+{ -+ /* Set the load_en of tx/rx slice to '1' */ -+ switch (slice) { -+ case 1: -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010); -+ break; -+ case 2: -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010); -+ break; -+ case 3: -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002); -+ break; -+ } -+} -+ -+static void -+pcie_phy_load_disable(int pcie_port, int slice) -+{ -+ /* set the load_en of tx/rx slice to '0' */ -+ switch (slice) { -+ case 1: -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010); -+ break; -+ case 2: -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010); -+ break; -+ case 3: -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002); -+ break; -+ } -+} -+ -+static void -+pcie_phy_load_war(int pcie_port) -+{ -+ int slice; -+ -+ for (slice = 1; slice < 4; slice++) { -+ pcie_phy_load_enable(pcie_port, slice); -+ udelay(1); -+ pcie_phy_load_disable(pcie_port, slice); -+ } -+} -+ -+static void -+pcie_phy_tx2_modulation(int pcie_port) -+{ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF); -+ mdelay(1); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF); -+} -+ -+static void -+pcie_phy_tx1_modulation(int pcie_port) -+{ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF); -+ mdelay(1); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF); -+} -+ -+static void -+pcie_phy_tx_modulation_war(int pcie_port) -+{ -+ int i; -+ -+#define PCIE_PHY_MODULATION_NUM 5 -+ for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) { -+ pcie_phy_tx2_modulation(pcie_port); -+ pcie_phy_tx1_modulation(pcie_port); -+ } -+#undef PCIE_PHY_MODULATION_NUM -+} -+ -+void -+pcie_phy_clock_mode_setup(int pcie_port) -+{ -+ pcie_pdi_big_endian(pcie_port); -+ -+ /* Enable PDI to access PCIe PHY register */ -+ pcie_pdi_pmu_enable(pcie_port); -+ -+ /* Configure PLL and PHY clock */ -+ pcie_phy_comm_setup(pcie_port); -+ -+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE -+ pcie_phy_36mhz_mode_setup(pcie_port); -+#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE) -+ pcie_phy_36mhz_ssc_mode_setup(pcie_port); -+#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE) -+ pcie_phy_25mhz_mode_setup(pcie_port); -+#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE) -+ pcie_phy_100mhz_mode_setup(pcie_port); -+#else -+ #error "PCIE PHY Clock Mode must be chosen first!!!!" -+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ -+ -+ /* Enable PCIe PHY and make PLL setting take effect */ -+ pcie_phy_pmu_enable(pcie_port); -+ -+ /* Check if we are in startup_ready status */ -+ pcie_phy_wait_startup_ready(pcie_port); -+ -+ pcie_phy_load_war(pcie_port); -+ -+ /* Apply TX modulation workarounds */ -+ pcie_phy_tx_modulation_war(pcie_port); -+ -+#ifdef IFX_PCI_PHY_REG_DUMP -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n"); -+ pcie_phy_reg_dump(pcie_port); -+#endif -+} -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_pm.c -@@ -0,0 +1,176 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_pm.c -+** PROJECT : IFX UEIP -+** MODULES : PCIE Root Complex Driver -+** -+** DATE : 21 Dec 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIE Root Complex Driver Power Managment -+** COPYRIGHT : Copyright (c) 2009 -+** Lantiq Deutschland GmbH -+** Am Campeon 3, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** HISTORY -+** $Date $Author $Comment -+** 21 Dec,2009 Lei Chuanhua First UEIP release -+*******************************************************************************/ -+/*! -+ \defgroup IFX_PCIE_PM Power Management functions -+ \ingroup IFX_PCIE -+ \brief IFX PCIE Root Complex Driver power management functions -+*/ -+ -+/*! -+ \file ifxmips_pcie_pm.c -+ \ingroup IFX_PCIE -+ \brief source file for PCIE Root Complex Driver Power Management -+*/ -+ -+#ifndef EXPORT_SYMTAB -+#define EXPORT_SYMTAB -+#endif -+#ifndef AUTOCONF_INCLUDED -+#include -+#endif /* AUTOCONF_INCLUDED */ -+#include -+#include -+#include -+#include -+#include -+ -+/* Project header */ -+#include -+#include -+#include -+#include -+#include "ifxmips_pcie_pm.h" -+ -+/** -+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState) -+ * \brief the callback function to request pmcu state in the power management hardware-dependent module -+ * -+ * \param pmcuState This parameter is a PMCU state. -+ * -+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully -+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. -+ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state -+ * \ingroup IFX_PCIE_PM -+ */ -+static IFX_PMCU_RETURN_t -+ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState) -+{ -+ switch(pmcuState) -+ { -+ case IFX_PMCU_STATE_D0: -+ return IFX_PMCU_RETURN_SUCCESS; -+ case IFX_PMCU_STATE_D1: // Not Applicable -+ return IFX_PMCU_RETURN_DENIED; -+ case IFX_PMCU_STATE_D2: // Not Applicable -+ return IFX_PMCU_RETURN_DENIED; -+ case IFX_PMCU_STATE_D3: // Module clock gating and Power gating -+ return IFX_PMCU_RETURN_SUCCESS; -+ default: -+ return IFX_PMCU_RETURN_DENIED; -+ } -+} -+ -+/** -+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState) -+ * \brief the callback function to get pmcu state in the power management hardware-dependent module -+ -+ * \param pmcuState Pointer to return power state. -+ * -+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully -+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. -+ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state -+ * \ingroup IFX_PCIE_PM -+ */ -+static IFX_PMCU_RETURN_t -+ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState) -+{ -+ return IFX_PMCU_RETURN_SUCCESS; -+} -+ -+/** -+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) -+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule -+ * -+ * \param pmcuModule Module -+ * \param newState New state -+ * \param oldState Old state -+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully -+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. -+ * \ingroup IFX_PCIE_PM -+ */ -+static IFX_PMCU_RETURN_t -+ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) -+{ -+ return IFX_PMCU_RETURN_SUCCESS; -+} -+ -+/** -+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) -+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule -+ * -+ * \param pmcuModule Module -+ * \param newState New state -+ * \param oldState Old state -+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully -+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. -+ * \ingroup IFX_PCIE_PM -+ */ -+static IFX_PMCU_RETURN_t -+ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) -+{ -+ return IFX_PMCU_RETURN_SUCCESS; -+} -+ -+/** -+ * \fn static void ifx_pcie_pmcu_init(void) -+ * \brief Register with central PMCU module -+ * \return none -+ * \ingroup IFX_PCIE_PM -+ */ -+void -+ifx_pcie_pmcu_init(void) -+{ -+ IFX_PMCU_REGISTER_t pmcuRegister; -+ -+ /* XXX, hook driver context */ -+ -+ /* State function register */ -+ memset(&pmcuRegister, 0, sizeof(IFX_PMCU_REGISTER_t)); -+ pmcuRegister.pmcuModule = IFX_PMCU_MODULE_PCIE; -+ pmcuRegister.pmcuModuleNr = 0; -+ pmcuRegister.ifx_pmcu_state_change = ifx_pcie_pmcu_state_change; -+ pmcuRegister.ifx_pmcu_state_get = ifx_pcie_pmcu_state_get; -+ pmcuRegister.pre = ifx_pcie_pmcu_prechange; -+ pmcuRegister.post= ifx_pcie_pmcu_postchange; -+ ifx_pmcu_register(&pmcuRegister); -+} -+ -+/** -+ * \fn static void ifx_pcie_pmcu_exit(void) -+ * \brief Unregister with central PMCU module -+ * -+ * \return none -+ * \ingroup IFX_PCIE_PM -+ */ -+void -+ifx_pcie_pmcu_exit(void) -+{ -+ IFX_PMCU_REGISTER_t pmcuUnRegister; -+ -+ /* XXX, hook driver context */ -+ -+ pmcuUnRegister.pmcuModule = IFX_PMCU_MODULE_PCIE; -+ pmcuUnRegister.pmcuModuleNr = 0; -+ ifx_pmcu_unregister(&pmcuUnRegister); -+} -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_pm.h -@@ -0,0 +1,36 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_pm.h -+** PROJECT : IFX UEIP -+** MODULES : PCIe Root Complex Driver -+** -+** DATE : 21 Dec 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver Power Managment -+** COPYRIGHT : Copyright (c) 2009 -+** Lantiq Deutschland GmbH -+** Am Campeon 3, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** HISTORY -+** $Date $Author $Comment -+** 21 Dec,2009 Lei Chuanhua First UEIP release -+*******************************************************************************/ -+/*! -+ \file ifxmips_pcie_pm.h -+ \ingroup IFX_PCIE -+ \brief header file for PCIe Root Complex Driver Power Management -+*/ -+ -+#ifndef IFXMIPS_PCIE_PM_H -+#define IFXMIPS_PCIE_PM_H -+ -+void ifx_pcie_pmcu_init(void); -+void ifx_pcie_pmcu_exit(void); -+ -+#endif /* IFXMIPS_PCIE_PM_H */ -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_reg.h -@@ -0,0 +1,1001 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_reg.h -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCIe module -+** -+** DATE : 02 Mar 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+#ifndef IFXMIPS_PCIE_REG_H -+#define IFXMIPS_PCIE_REG_H -+/*! -+ \file ifxmips_pcie_reg.h -+ \ingroup IFX_PCIE -+ \brief header file for PCIe module register definition -+*/ -+/* PCIe Address Mapping Base */ -+#define PCIE_CFG_PHY_BASE 0x1D000000UL -+#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE) -+#define PCIE_CFG_SIZE (8 * 1024 * 1024) -+ -+#define PCIE_MEM_PHY_BASE 0x1C000000UL -+#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE) -+#define PCIE_MEM_SIZE (16 * 1024 * 1024) -+#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1) -+ -+#define PCIE_IO_PHY_BASE 0x1D800000UL -+#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE) -+#define PCIE_IO_SIZE (1 * 1024 * 1024) -+#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1) -+ -+#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000) -+#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900) -+#define PCIE_MSI_PHY_BASE 0x1F600000UL -+ -+#define PCIE_PDI_PHY_BASE 0x1F106800UL -+#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE) -+#define PCIE_PDI_SIZE 0x400 -+ -+#define PCIE1_CFG_PHY_BASE 0x19000000UL -+#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE) -+#define PCIE1_CFG_SIZE (8 * 1024 * 1024) -+ -+#define PCIE1_MEM_PHY_BASE 0x18000000UL -+#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE) -+#define PCIE1_MEM_SIZE (16 * 1024 * 1024) -+#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1) -+ -+#define PCIE1_IO_PHY_BASE 0x19800000UL -+#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE) -+#define PCIE1_IO_SIZE (1 * 1024 * 1024) -+#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1) -+ -+#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000) -+#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700) -+#define PCIE1_MSI_PHY_BASE 0x1F400000UL -+ -+#define PCIE1_PDI_PHY_BASE 0x1F700400UL -+#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE) -+#define PCIE1_PDI_SIZE 0x400 -+ -+#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE)) -+#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE)) -+#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE)) -+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE)) -+#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END)) -+#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE)) -+#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END)) -+#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG)) -+#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE)) -+#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE)) -+ -+/* PCIe Application Logic Register */ -+/* RC Core Control Register */ -+#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10) -+/* This should be enabled after initializing configuratin registers -+ * Also should check link status retraining bit -+ */ -+#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */ -+ -+/* RC Core Debug Register */ -+#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14) -+#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */ -+#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */ -+#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1 -+#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */ -+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4 -+ -+#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */ -+#define PCIE_RC_DR_PM_DEV_STATE_S 9 -+ -+#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */ -+#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */ -+#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */ -+ -+/* Current Power State Definition */ -+enum { -+ PCIE_RC_DR_D0 = 0, -+ PCIE_RC_DR_D1, /* Not supported */ -+ PCIE_RC_DR_D2, /* Not supported */ -+ PCIE_RC_DR_D3, -+ PCIE_RC_DR_UN, -+}; -+ -+/* PHY Link Status Register */ -+#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18) -+#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */ -+ -+/* Electromechanical Control Register */ -+#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C) -+#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */ -+#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */ -+#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */ -+#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */ -+#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */ -+#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */ -+#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */ -+#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */ -+ -+/* Interrupt Status Register */ -+#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20) -+#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */ -+#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */ -+#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */ -+#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */ -+#define PCIE_IR_SR_AHB_LU_ERR_S 4 -+#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */ -+#define PCIE_IR_SR_INT_MSG_NUM_S 9 -+#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ -+#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27 -+ -+/* Message Control Register */ -+#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30) -+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */ -+#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */ -+ -+#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34) -+ -+/* Vendor-Defined Message Requester ID Register */ -+#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38) -+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF -+#define PCIE_VDM_RID_VDMRID_S 0 -+ -+/* ASPM Control Register */ -+#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40) -+#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */ -+#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */ -+#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */ -+ -+/* Vendor Message DW0 Register */ -+#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50) -+#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */ -+#define PCIE_VM_MSG_DW0_TYPE_S 0 -+#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */ -+#define PCIE_VM_MSG_DW0_FORMAT_S 5 -+#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */ -+#define PCIE_VM_MSG_DW0_TC_S 12 -+#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */ -+#define PCIE_VM_MSG_DW0_ATTR_S 18 -+#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */ -+#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */ -+#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */ -+#define PCIE_VM_MSG_DW0_LEN_S 22 -+ -+/* Format Definition */ -+enum { -+ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/ -+ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */ -+ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */ -+ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */ -+}; -+ -+/* Traffic Class Definition */ -+enum { -+ PCIE_VM_MSG_TC0 = 0, -+ PCIE_VM_MSG_TC1, -+ PCIE_VM_MSG_TC2, -+ PCIE_VM_MSG_TC3, -+ PCIE_VM_MSG_TC4, -+ PCIE_VM_MSG_TC5, -+ PCIE_VM_MSG_TC6, -+ PCIE_VM_MSG_TC7, -+}; -+ -+/* Attributes Definition */ -+enum { -+ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */ -+ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */ -+ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/ -+ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */ -+}; -+ -+/* Payload Size Definition */ -+#define PCIE_VM_MSG_LEN_MIN 0 -+#define PCIE_VM_MSG_LEN_MAX 1024 -+ -+/* Vendor Message DW1 Register */ -+#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54) -+#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */ -+#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8 -+#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */ -+#define PCIE_VM_MSG_DW1_CODE_S 16 -+#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */ -+#define PCIE_VM_MSG_DW1_TAG_S 24 -+ -+#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58) -+#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C) -+ -+/* Vendor Message Request Register */ -+#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60) -+#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */ -+ -+ -+/* AHB Slave Side Band Control Register */ -+#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70) -+#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */ -+#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */ -+#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */ -+#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */ -+#define PCIE_AHB_SSB_REQ_ATTR_S 3 -+#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */ -+#define PCIE_AHB_SSB_REQ_TC_S 5 -+ -+/* AHB Master SideBand Ctrl Register */ -+#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74) -+#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */ -+#define PCIE_AHB_MSB_RESP_ATTR_S 0 -+#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */ -+#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */ -+#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */ -+#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */ -+#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */ -+#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6 -+ -+/* AHB Control Register, fixed bus enumeration exception */ -+#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78) -+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001 -+ -+/* Interrupt Enalbe Register */ -+#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4) -+#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8) -+#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC) -+ -+/* PCIe interrupt enable/control/capture register definition */ -+#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */ -+#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */ -+#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */ -+#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */ -+#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */ -+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */ -+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */ -+#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */ -+#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */ -+#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */ -+#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */ -+#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */ -+#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */ -+#define PCIE_IRN_INTA 0x00002000 /* INTA */ -+#define PCIE_IRN_INTB 0x00004000 /* INTB */ -+#define PCIE_IRN_INTC 0x00008000 /* INTC */ -+#define PCIE_IRN_INTD 0x00010000 /* INTD */ -+#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */ -+ -+#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \ -+ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\ -+ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \ -+ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \ -+ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT) -+/* PCIe RC Configuration Register */ -+#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00) -+ -+/* Bit definition from pci_reg.h */ -+#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04) -+#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08) -+#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */ -+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */ -+#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/ -+#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */ -+ -+#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */ -+/* Bus Number Register bits */ -+#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF -+#define PCIE_BNR_PRIMARY_BUS_NUM_S 0 -+#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00 -+#define PCIE_PNR_SECONDARY_BUS_NUM_S 8 -+#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000 -+#define PCIE_PNR_SUB_BUS_NUM_S 16 -+ -+/* IO Base/Limit Register bits */ -+#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */ -+#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001 -+#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0 -+#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4 -+#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100 -+#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000 -+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12 -+ -+/* Non-prefetchable Memory Base/Limit Register bit */ -+#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */ -+#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0 -+#define PCIE_MBML_MEM_BASE_ADDR_S 4 -+#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000 -+#define PCIE_MBML_MEM_LIMIT_ADDR_S 20 -+ -+/* Prefetchable Memory Base/Limit Register bit */ -+#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */ -+#define PCIE_PMBL_64BIT_ADDR 0x00000001 -+#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0 -+#define PCIE_PMBL_UPPER_12BIT_S 4 -+#define PCIE_PMBL_E64MA 0x00010000 -+#define PCIE_PMBL_END_ADDR 0xFFF00000 -+#define PCIE_PMBL_END_ADDR_S 20 -+#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */ -+#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */ -+ -+/* I/O Base/Limit Upper 16 bits register */ -+#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */ -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0 -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000 -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16 -+ -+#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34) -+#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38) -+ -+/* Interrupt and Secondary Bridge Control Register */ -+#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C) -+ -+#define PCIE_INTRBCTRL_INT_LINE 0x000000FF -+#define PCIE_INTRBCTRL_INT_LINE_S 0 -+#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00 -+#define PCIE_INTRBCTRL_INT_PIN_S 8 -+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */ -+#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */ -+#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */ -+#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */ -+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */ -+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */ -+/* Others are read only */ -+enum { -+ PCIE_INTRBCTRL_INT_NON = 0, -+ PCIE_INTRBCTRL_INTA, -+ PCIE_INTRBCTRL_INTB, -+ PCIE_INTRBCTRL_INTC, -+ PCIE_INTRBCTRL_INTD, -+}; -+ -+#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40) -+ -+/* Power Management Control and Status Register */ -+#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44) -+ -+#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */ -+#define PCIE_PM_CSR_POWER_STATE_S 0 -+#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */ -+#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */ -+#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */ -+ -+/* MSI Capability Register for EP */ -+#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50) -+ -+#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */ -+#define PCIE_MCAPR_MSI_CAP_ID_S 0 -+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */ -+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8 -+#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */ -+#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */ -+#define PCIE_MCAPR_MULTI_MSG_CAP_S 17 -+#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */ -+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20 -+#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */ -+ -+/* MSI Message Address Register */ -+#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54) -+ -+#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */ -+ -+/* MSI Message Upper Address Register */ -+#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58) -+ -+/* MSI Message Data Register */ -+#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C) -+ -+#define PCIE_MD_DATA 0x0000FFFF /* Message Data */ -+#define PCIE_MD_DATA_S 0 -+ -+/* PCI Express Capability Register */ -+#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70) -+ -+#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */ -+#define PCIE_XCAP_ID_S 0 -+#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */ -+#define PCIE_XCAP_NEXT_CAP_S 8 -+#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */ -+#define PCIE_XCAP_VER_S 16 -+#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */ -+#define PCIE_XCAP_DEV_PORT_TYPE_S 20 -+#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */ -+#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */ -+#define PCIE_XCAP_MSG_INT_NUM_S 25 -+ -+/* Device Capability Register */ -+#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74) -+ -+#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */ -+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0 -+#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */ -+#define PCIE_DCAP_PHANTOM_FUNC_S 3 -+#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */ -+#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */ -+#define PCIE_DCAP_EP_L0S_LATENCY_S 6 -+#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */ -+#define PCIE_DCAP_EP_L1_LATENCY_S 9 -+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */ -+ -+/* Maximum payload size supported */ -+enum { -+ PCIE_MAX_PAYLOAD_128 = 0, -+ PCIE_MAX_PAYLOAD_256, -+ PCIE_MAX_PAYLOAD_512, -+ PCIE_MAX_PAYLOAD_1024, -+ PCIE_MAX_PAYLOAD_2048, -+ PCIE_MAX_PAYLOAD_4096, -+}; -+ -+/* Device Control and Status Register */ -+#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78) -+ -+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */ -+#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */ -+#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */ -+#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */ -+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */ -+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */ -+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5 -+#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */ -+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */ -+#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */ -+#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/ -+#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/ -+#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12 -+#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */ -+#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */ -+#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */ -+#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */ -+#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */ -+#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */ -+ -+#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \ -+ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \ -+ PCIE_DCTLSYS_UR_REQ_EN) -+ -+/* Link Capability Register */ -+#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C) -+#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */ -+#define PCIE_LCAP_MAX_LINK_SPEED_S 0 -+#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */ -+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4 -+#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */ -+#define PCIE_LCAP_ASPM_LEVEL_S 10 -+#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */ -+#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12 -+#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */ -+#define PCIE_LCAP_L1_EXIT_LATENCY_S 15 -+#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */ -+#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */ -+#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */ -+#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */ -+#define PCIE_LCAP_PORT_NUM_S 24 -+ -+/* Maximum Length width definition */ -+#define PCIE_MAX_LENGTH_WIDTH_RES 0x00 -+#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */ -+#define PCIE_MAX_LENGTH_WIDTH_X2 0x02 -+#define PCIE_MAX_LENGTH_WIDTH_X4 0x04 -+#define PCIE_MAX_LENGTH_WIDTH_X8 0x08 -+#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C -+#define PCIE_MAX_LENGTH_WIDTH_X16 0x10 -+#define PCIE_MAX_LENGTH_WIDTH_X32 0x20 -+ -+/* Active State Link PM definition */ -+enum { -+ PCIE_ASPM_RES0 = 0, -+ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */ -+ PCIE_ASPM_RES1, -+ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */ -+}; -+ -+/* L0s Exit Latency definition */ -+enum { -+ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */ -+ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */ -+ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */ -+ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */ -+ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */ -+ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */ -+ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */ -+ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */ -+}; -+ -+/* L1 Exit Latency definition */ -+enum { -+ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */ -+ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */ -+ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */ -+ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */ -+ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */ -+ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */ -+ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */ -+ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */ -+}; -+ -+/* Link Control and Status Register */ -+#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80) -+#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */ -+#define PCIE_LCTLSTS_ASPM_ENABLE_S 0 -+#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/ -+#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */ -+#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */ -+#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */ -+#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */ -+#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */ -+#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */ -+#define PCIE_LCTLSTS_LINK_SPEED_S 16 -+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */ -+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20 -+#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */ -+#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */ -+#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */ -+ -+/* Slot Capabilities Register */ -+#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84) -+ -+/* Slot Capabilities */ -+#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88) -+ -+/* Root Control and Capability Register */ -+#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C) -+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */ -+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */ -+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */ -+#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */ -+#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \ -+ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR) -+/* Root Status Register */ -+#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90) -+#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */ -+#define PCIE_RSTS_PME_REQ_ID_S 0 -+#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */ -+#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */ -+ -+/* PCI Express Enhanced Capability Header */ -+#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100) -+#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */ -+#define PCIE_ENHANCED_CAP_ID_S 0 -+#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */ -+#define PCIE_ENHANCED_CAP_VER_S 16 -+#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */ -+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20 -+ -+/* Uncorrectable Error Status Register */ -+#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104) -+#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */ -+#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */ -+#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */ -+#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */ -+#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */ -+#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */ -+#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */ -+#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */ -+#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */ -+#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */ -+#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */ -+#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \ -+ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \ -+ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\ -+ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ) -+ -+/* Uncorrectable Error Mask Register, Mask means no report */ -+#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108) -+ -+/* Uncorrectable Error Severity Register */ -+#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C) -+ -+/* Correctable Error Status Register */ -+#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110) -+#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */ -+#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */ -+#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */ -+#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */ -+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */ -+#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */ -+#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\ -+ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR) -+ -+/* Correctable Error Mask Register */ -+#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114) -+ -+/* Advanced Error Capabilities and Control Register */ -+#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118) -+#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */ -+#define PCIE_AECCR_FIRST_ERR_PTR_S 0 -+#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */ -+#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */ -+#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */ -+#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */ -+ -+/* Header Log Register 1 */ -+#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C) -+ -+/* Header Log Register 2 */ -+#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120) -+ -+/* Header Log Register 3 */ -+#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124) -+ -+/* Header Log Register 4 */ -+#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128) -+ -+/* Root Error Command Register */ -+#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C) -+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */ -+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */ -+#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */ -+#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \ -+ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN) -+ -+/* Root Error Status Register */ -+#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130) -+#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */ -+#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */ -+#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */ -+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */ -+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */ -+#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */ -+#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */ -+#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ -+#define PCIE_RESR_AER_INT_MSG_NUM_S 27 -+ -+/* Error Source Indentification Register */ -+#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134) -+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF -+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0 -+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000 -+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16 -+ -+/* VC Enhanced Capability Header */ -+#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140) -+ -+/* Port VC Capability Register */ -+#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144) -+#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */ -+#define PCIE_PVC1_EXT_VC_CNT_S 0 -+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */ -+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4 -+#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */ -+#define PCIE_PVC1_REF_CLK_S 8 -+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */ -+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10 -+ -+/* Extended Virtual Channel Count Defintion */ -+#define PCIE_EXT_VC_CNT_MIN 0 -+#define PCIE_EXT_VC_CNT_MAX 7 -+ -+/* Port Arbitration Table Entry Size Definition */ -+enum { -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0, -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT, -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT, -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT, -+}; -+ -+/* Port VC Capability Register 2 */ -+#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148) -+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */ -+#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ -+#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ -+#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ -+#define PCIE_PVC2_VC_ARB_WRR 0x0000000F -+#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */ -+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24 -+ -+/* Port VC Control and Status Register */ -+#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C) -+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */ -+#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */ -+#define PCIE_PVCCRSR_VC_ARB_SEL_S 1 -+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */ -+ -+/* VC0 Resource Capability Register */ -+#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150) -+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */ -+#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\ -+ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \ -+ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR) -+ -+#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */ -+#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */ -+#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16 -+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */ -+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24 -+ -+/* VC0 Resource Control Register */ -+#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154) -+#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */ -+#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */ -+#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */ -+#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */ -+#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */ -+#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */ -+#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */ -+#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */ -+#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */ -+ -+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */ -+#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */ -+#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17 -+#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */ -+#define PCIE_VC0_RC0_VC_ID_S 24 -+#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */ -+ -+/* VC0 Resource Status Register */ -+#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158) -+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */ -+#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */ -+ -+/* Ack Latency Timer and Replay Timer Register */ -+#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700) -+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */ -+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0 -+#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */ -+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16 -+ -+/* Other Message Register */ -+#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704) -+ -+/* Port Force Link Register */ -+#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708) -+#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */ -+#define PCIE_PFLR_LINK_NUM_S 0 -+#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */ -+#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */ -+#define PCIE_PFLR_LINK_STATE_S 16 -+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */ -+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24 -+ -+/* Ack Frequency Register */ -+#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C) -+#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */ -+#define PCIE_AFR_AF_S 0 -+#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */ -+#define PCIE_AFR_FTS_NUM_S 8 -+#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/ -+#define PCIE_AFR_COM_FTS_NUM_S 16 -+#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */ -+#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24 -+#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */ -+#define PCIE_AFR_L1_ENTRY_LATENCY_S 27 -+#define PCIE_AFR_FTS_NUM_DEFAULT 32 -+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7 -+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5 -+ -+/* Port Link Control Register */ -+#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710) -+#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */ -+#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */ -+#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */ -+#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */ -+#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */ -+#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */ -+#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */ -+#define PCIE_PLCR_LINK_MODE_S 16 -+#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */ -+ -+/* Lane Skew Register */ -+#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714) -+#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */ -+#define PCIE_LSR_LANE_SKEW_NUM_S 0 -+#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */ -+#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */ -+#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */ -+ -+/* Symbol Number Register */ -+#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718) -+#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */ -+#define PCIE_SNR_TS_S 0 -+#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */ -+#define PCIE_SNR_SKP_S 8 -+#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */ -+#define PCIE_SNR_REPLAY_TIMER_S 14 -+#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */ -+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19 -+#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */ -+#define PCIE_SNR_FC_TIMER_S 28 -+ -+/* Symbol Timer Register and Filter Mask Register 1 */ -+#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C) -+#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */ -+#define PCIE_STRFMR_SKP_INTERVAL_S 0 -+#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */ -+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */ -+#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */ -+#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */ -+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */ -+#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */ -+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */ -+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */ -+#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */ -+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */ -+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */ -+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */ -+ -+#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */ -+ -+/* Filter Masker Register 2 */ -+#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720) -+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */ -+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */ -+ -+/* Debug Register 0 */ -+#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728) -+ -+/* Debug Register 1 */ -+#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C) -+ -+/* Transmit Posted FC Credit Status Register */ -+#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730) -+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */ -+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0 -+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */ -+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12 -+ -+/* Transmit Non-Posted FC Credit Status */ -+#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734) -+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */ -+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0 -+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */ -+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12 -+ -+/* Transmit Complete FC Credit Status Register */ -+#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738) -+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */ -+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0 -+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */ -+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12 -+ -+/* Queue Status Register */ -+#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C) -+#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */ -+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */ -+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */ -+ -+/* VC Transmit Arbitration Register 1 */ -+#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740) -+#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */ -+#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */ -+#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */ -+#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */ -+ -+/* VC Transmit Arbitration Register 2 */ -+#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744) -+#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */ -+#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */ -+#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */ -+#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */ -+ -+/* VC0 Posted Receive Queue Control Register */ -+#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748) -+#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */ -+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0 -+#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */ -+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12 -+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */ -+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20 -+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */ -+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */ -+ -+/* VC0 Non-Posted Receive Queue Control */ -+#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C) -+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */ -+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0 -+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */ -+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12 -+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */ -+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20 -+ -+/* VC0 Completion Receive Queue Control */ -+#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750) -+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */ -+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0 -+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */ -+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12 -+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */ -+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21 -+ -+/* Applicable to the above three registers */ -+enum { -+ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1, -+ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2, -+ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4, -+}; -+ -+/* VC0 Posted Buffer Depth Register */ -+#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8) -+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */ -+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0 -+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */ -+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16 -+ -+/* VC0 Non-Posted Buffer Depth Register */ -+#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC) -+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */ -+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0 -+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */ -+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16 -+ -+/* VC0 Completion Buffer Depth Register */ -+#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0) -+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */ -+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0 -+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */ -+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16 -+ -+/* PHY Status Register, all zeros in VR9 */ -+#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810) -+ -+/* PHY Control Register, all zeros in VR9 */ -+#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814) -+ -+/* -+ * PCIe PDI PHY register definition, suppose all the following -+ * stuff is confidential. -+ * XXX, detailed bit definition -+ */ -+#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1)) -+#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1)) -+#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1)) -+#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1)) -+#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1)) -+#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1)) -+#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1)) -+#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1)) -+#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1)) -+#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1)) -+#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1)) -+ -+#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1)) -+#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1)) -+#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1)) -+#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1)) -+#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1)) -+#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1)) -+#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1)) -+#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1)) -+ -+#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1)) -+#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1)) -+#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1)) -+#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1)) -+#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1)) -+#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1)) -+#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1)) -+ -+#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1)) -+#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1)) -+#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1)) -+#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1)) -+#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1)) -+ -+/* Interrupt related stuff */ -+#define PCIE_LEGACY_DISABLE 0 -+#define PCIE_LEGACY_INTA 1 -+#define PCIE_LEGACY_INTB 2 -+#define PCIE_LEGACY_INTC 3 -+#define PCIE_LEGACY_INTD 4 -+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD -+ -+#endif /* IFXMIPS_PCIE_REG_H */ -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_vr9.h -@@ -0,0 +1,271 @@ -+/**************************************************************************** -+ Copyright (c) 2010 -+ Lantiq Deutschland GmbH -+ Am Campeon 3; 85579 Neubiberg, Germany -+ -+ For licensing information, see the file 'LICENSE' in the root folder of -+ this software module. -+ -+ *****************************************************************************/ -+/*! -+ \file ifxmips_pcie_vr9.h -+ \ingroup IFX_PCIE -+ \brief PCIe RC driver vr9 specific file -+*/ -+ -+#ifndef IFXMIPS_PCIE_VR9_H -+#define IFXMIPS_PCIE_VR9_H -+ -+#include -+#include -+ -+#include -+#include -+ -+#define IFX_PCIE_GPIO_RESET 238 -+ -+#define IFX_REG_R32 ltq_r32 -+#define IFX_REG_W32 ltq_w32 -+#define CONFIG_IFX_PCIE_HW_SWAP -+#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C)) -+#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010)) -+#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/ -+ -+#define IFX_RCU (KSEG1 | 0x1F203000) -+#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */ -+#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */ -+#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */ -+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE -+ -+#define IFX_PMU1_MODULE_PCIE_PHY (0) -+#define IFX_PMU1_MODULE_PCIE_CTRL (1) -+#define IFX_PMU1_MODULE_PDI (4) -+#define IFX_PMU1_MODULE_MSI (5) -+ -+#define IFX_PMU_MODULE_PCIE_L0_CLK (31) -+ -+ -+#define IFX_GPIO (KSEG1 | 0x1E100B00) -+#define ALT0 ((volatile u32*)(IFX_GPIO + 0x007c)) -+#define ALT1 ((volatile u32*)(IFX_GPIO + 0x0080)) -+#define OD ((volatile u32*)(IFX_GPIO + 0x0084)) -+#define DIR ((volatile u32*)(IFX_GPIO + 0x0078)) -+#define OUT ((volatile u32*)(IFX_GPIO + 0x0070)) -+ -+ -+static inline void pcie_ep_gpio_rst_init(int pcie_port) -+{ -+ -+ gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset"); -+ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); -+ gpio_set_value(IFX_PCIE_GPIO_RESET, 1); -+ -+/* ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+ ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+ ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+ ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+ ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+ ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/ -+} -+ -+static inline void pcie_ahb_pmu_setup(void) -+{ -+ /* Enable AHB bus master/slave */ -+ struct clk *clk; -+ clk = clk_get_sys("1d900000.pcie", "ahb"); -+ clk_enable(clk); -+ -+ //AHBM_PMU_SETUP(IFX_PMU_ENABLE); -+ //AHBS_PMU_SETUP(IFX_PMU_ENABLE); -+} -+ -+static inline void pcie_rcu_endian_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); -+#ifdef CONFIG_IFX_PCIE_HW_SWAP -+ reg |= IFX_RCU_AHB_BE_PCIE_M; -+ reg |= IFX_RCU_AHB_BE_PCIE_S; -+ reg &= ~IFX_RCU_AHB_BE_XBAR_M; -+#else -+ reg |= IFX_RCU_AHB_BE_PCIE_M; -+ reg &= ~IFX_RCU_AHB_BE_PCIE_S; -+ reg &= ~IFX_RCU_AHB_BE_XBAR_M; -+#endif /* CONFIG_IFX_PCIE_HW_SWAP */ -+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); -+} -+ -+static inline void pcie_phy_pmu_enable(int pcie_port) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("1d900000.pcie", "phy"); -+ clk_enable(clk); -+ -+ //PCIE_PHY_PMU_SETUP(IFX_PMU_ENABLE); -+} -+ -+static inline void pcie_phy_pmu_disable(int pcie_port) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("1d900000.pcie", "phy"); -+ clk_disable(clk); -+ -+// PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE); -+} -+ -+static inline void pcie_pdi_big_endian(int pcie_port) -+{ -+ u32 reg; -+ -+ /* SRAM2PDI endianness control. */ -+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); -+ /* Config AHB->PCIe and PDI endianness */ -+ reg |= IFX_RCU_AHB_BE_PCIE_PDI; -+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); -+} -+ -+static inline void pcie_pdi_pmu_enable(int pcie_port) -+{ -+ /* Enable PDI to access PCIe PHY register */ -+ struct clk *clk; -+ clk = clk_get_sys("1d900000.pcie", "pdi"); -+ clk_enable(clk); -+ //PDI_PMU_SETUP(IFX_PMU_ENABLE); -+} -+ -+static inline void pcie_core_rst_assert(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ -+ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */ -+ reg |= 0x00400000; -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_core_rst_deassert(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Make sure one micro-second delay */ -+ udelay(1); -+ -+ /* Reset PCIe PHY & Core, bit 22 */ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ reg &= ~0x00400000; -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_phy_rst_assert(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ reg |= 0x00001000; /* Bit 12 */ -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_phy_rst_deassert(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Make sure one micro-second delay */ -+ udelay(1); -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ reg &= ~0x00001000; /* Bit 12 */ -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_device_rst_assert(int pcie_port) -+{ -+ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); -+ gpio_set_value(IFX_PCIE_GPIO_RESET, 0); -+// ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+} -+ -+static inline void pcie_device_rst_deassert(int pcie_port) -+{ -+ mdelay(100); -+ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); -+ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); -+// gpio_set_value(IFX_PCIE_GPIO_RESET, 1); -+ //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+} -+ -+static inline void pcie_core_pmu_setup(int pcie_port) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("1d900000.pcie", "ctl"); -+ clk_enable(clk); -+ clk = clk_get_sys("1d900000.pcie", "bus"); -+ clk_enable(clk); -+ -+ /* PCIe Core controller enabled */ -+// PCIE_CTRL_PMU_SETUP(IFX_PMU_ENABLE); -+ -+ /* Enable PCIe L0 Clock */ -+// PCIE_L0_CLK_PMU_SETUP(IFX_PMU_ENABLE); -+} -+ -+static inline void pcie_msi_init(int pcie_port) -+{ -+ struct clk *clk; -+ pcie_msi_pic_init(pcie_port); -+ clk = clk_get_sys("ltq_pcie", "msi"); -+ clk_enable(clk); -+// MSI_PMU_SETUP(IFX_PMU_ENABLE); -+} -+ -+static inline u32 -+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) -+{ -+ u32 tbus_number = bus_number; -+ -+#ifdef CONFIG_IFX_PCI -+ if (pcibios_host_nr() > 1) { -+ tbus_number -= pcibios_1st_host_bus_nr(); -+ } -+#endif /* CONFIG_IFX_PCI */ -+ return tbus_number; -+} -+ -+static inline u32 -+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) -+{ -+ struct pci_dev *pdev; -+ u32 tvalue = value; -+ -+ /* Sanity check */ -+ pdev = pci_get_slot(bus, devfn); -+ if (pdev == NULL) { -+ return tvalue; -+ } -+ -+ /* Only care about PCI bridge */ -+ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { -+ return tvalue; -+ } -+ -+ if (read) { /* Read hack */ -+ #ifdef CONFIG_IFX_PCI -+ if (pcibios_host_nr() > 1) { -+ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); -+ } -+ #endif /* CONFIG_IFX_PCI */ -+ } -+ else { /* Write hack */ -+ #ifdef CONFIG_IFX_PCI -+ if (pcibios_host_nr() > 1) { -+ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); -+ } -+ #endif -+ } -+ return tvalue; -+} -+ -+#endif /* IFXMIPS_PCIE_VR9_H */ -+ ---- a/arch/mips/pci/pci.c -+++ b/arch/mips/pci/pci.c -@@ -250,6 +250,31 @@ static int __init pcibios_init(void) - - subsys_initcall(pcibios_init); - -+int pcibios_host_nr(void) -+{ -+ int count; -+ struct pci_controller *hose; -+ for (count = 0, hose = hose_head; hose; hose = hose->next, count++) { -+ ; -+ } -+ return count; -+} -+EXPORT_SYMBOL(pcibios_host_nr); -+ -+int pcibios_1st_host_bus_nr(void) -+{ -+ int bus_nr = 0; -+ struct pci_controller *hose = hose_head; -+ -+ if (hose != NULL) { -+ if (hose->bus != NULL) { -+ bus_nr = hose->bus->number + 1; -+ } -+ } -+ return bus_nr; -+} -+EXPORT_SYMBOL(pcibios_1st_host_bus_nr); -+ - static int pcibios_enable_resources(struct pci_dev *dev, int mask) - { - u16 cmd, old_cmd; ---- a/drivers/pci/pcie/aer/Kconfig -+++ b/drivers/pci/pcie/aer/Kconfig -@@ -5,7 +5,7 @@ - config PCIEAER - boolean "Root Port Advanced Error Reporting support" - depends on PCIEPORTBUS -- default y -+ default n - help - This enables PCI Express Root Port Advanced Error Reporting - (AER) driver support. Error reporting messages sent to Root ---- a/include/linux/pci.h -+++ b/include/linux/pci.h -@@ -1038,6 +1038,8 @@ void pci_walk_bus(struct pci_bus *top, i - int pci_cfg_space_size_ext(struct pci_dev *dev); - int pci_cfg_space_size(struct pci_dev *dev); - unsigned char pci_bus_max_busnr(struct pci_bus *bus); -+int pcibios_host_nr(void); -+int pcibios_1st_host_bus_nr(void); - void pci_setup_bridge(struct pci_bus *bus); - resource_size_t pcibios_window_alignment(struct pci_bus *bus, - unsigned long type); ---- a/include/linux/pci_ids.h -+++ b/include/linux/pci_ids.h -@@ -1040,6 +1040,12 @@ - #define PCI_DEVICE_ID_SGI_LITHIUM 0x1002 - #define PCI_DEVICE_ID_SGI_IOC4 0x100a - -+#define PCI_VENDOR_ID_INFINEON 0x15D1 -+#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F -+#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011 -+#define PCI_VENDOR_ID_LANTIQ 0x1BEF -+#define PCI_DEVICE_ID_LANTIQ_PCIE 0x00 -+ - #define PCI_VENDOR_ID_WINBOND 0x10ad - #define PCI_DEVICE_ID_WINBOND_82C105 0x0105 - #define PCI_DEVICE_ID_WINBOND_83C553 0x0565 diff --git a/target/linux/lantiq/patches-3.7/0123-USB-fix-roothub-for-IFXHCD.patch b/target/linux/lantiq/patches-3.7/0123-USB-fix-roothub-for-IFXHCD.patch deleted file mode 100644 index 2eb2317a05..0000000000 --- a/target/linux/lantiq/patches-3.7/0123-USB-fix-roothub-for-IFXHCD.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 1b6941ae603f2885e6cf729119ef753deb7eb835 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 6 Dec 2012 19:59:53 +0100 -Subject: [PATCH 123/123] USB: fix roothub for IFXHCD - ---- - drivers/usb/core/hub.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/usb/core/hub.c -+++ b/drivers/usb/core/hub.c -@@ -3940,7 +3940,7 @@ hub_port_init (struct usb_hub *hub, stru - udev->ttport = hdev->ttport; - } else if (udev->speed != USB_SPEED_HIGH - && hdev->speed == USB_SPEED_HIGH) { -- if (!hub->tt.hub) { -+ if (hdev->parent && !hub->tt.hub) { - dev_err(&udev->dev, "parent hub has no TT\n"); - retval = -EINVAL; - goto fail; ---- a/arch/mips/lantiq/Kconfig -+++ b/arch/mips/lantiq/Kconfig -@@ -3,6 +3,7 @@ if LANTIQ - config SOC_TYPE_XWAY - bool - select PINCTRL_XWAY -+ select USB_ARCH_HAS_HCD - default n - - choice diff --git a/target/linux/lantiq/patches-3.7/0124-pci_fix.patch b/target/linux/lantiq/patches-3.7/0124-pci_fix.patch deleted file mode 100644 index 831989e165..0000000000 --- a/target/linux/lantiq/patches-3.7/0124-pci_fix.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/arch/mips/pci/pci-lantiq.c -+++ b/arch/mips/pci/pci-lantiq.c -@@ -129,8 +129,15 @@ static int __devinit ltq_pci_startup(str - - /* setup reset gpio used by pci */ - reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); -- if (gpio_is_valid(reset_gpio)) -- devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset"); -+ if (gpio_is_valid(reset_gpio)) { -+ int ret = devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset"); -+ if (ret) { -+ dev_err(&pdev->dev, -+ "failed to request gpio %d\n", reset_gpio); -+ return ret; -+ } -+ gpio_direction_output(reset_gpio, 1); -+ } - - /* enable auto-switching between PCI and EBU */ - ltq_pci_w32(0xa, PCI_CR_CLK_CTRL); diff --git a/target/linux/lantiq/patches-3.7/0125-falcon-pad.patch b/target/linux/lantiq/patches-3.7/0125-falcon-pad.patch deleted file mode 100644 index 2fbe0c7be9..0000000000 --- a/target/linux/lantiq/patches-3.7/0125-falcon-pad.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/pinctrl/pinctrl-falcon.c -+++ b/drivers/pinctrl/pinctrl-falcon.c -@@ -398,6 +398,9 @@ static int pinctrl_falcon_probe(struct p - u32 avail; - int pins; - -+ if (!of_device_is_available(np)) -+ continue; -+ - if (!ppdev) { - dev_err(&pdev->dev, "failed to find pad pdev\n"); - continue; diff --git a/target/linux/lantiq/patches-3.7/0126-lantiq_etop-Change-MDIO-clock.patch b/target/linux/lantiq/patches-3.7/0126-lantiq_etop-Change-MDIO-clock.patch deleted file mode 100644 index b9488a125e..0000000000 --- a/target/linux/lantiq/patches-3.7/0126-lantiq_etop-Change-MDIO-clock.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 2f9f0ec1ff013934a86a7303c9194f6dc05620c3 Mon Sep 17 00:00:00 2001 -From: Sebastian Mayr -Date: Thu, 20 Dec 2012 18:34:45 +0100 -Subject: [PATCH 1/2] lantiq_etop: Change MDIO clock - -This patch sets the MDC clock to 2.5MHz which fixes the MDIO communication -with the ar8316 switch. ---- - drivers/net/ethernet/lantiq_etop.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/net/ethernet/lantiq_etop.c -+++ b/drivers/net/ethernet/lantiq_etop.c -@@ -83,6 +83,7 @@ - #define LTQ_GBIT_PMAC_HD_CTL 0x8c - #define LTQ_GBIT_P0_CTL 0x4 - #define LTQ_GBIT_PMAC_RX_IPG 0xa8 -+#define LTQ_GBIT_RGMII_CTL 0x78 - - #define PMAC_HD_CTL_AS (1 << 19) - #define PMAC_HD_CTL_RXSH (1 << 22) -@@ -92,6 +93,10 @@ - /* Disable MDIO auto polling (0=disable, 1=enable) */ - #define PX_CTL_DMDIO 0x00400000 - -+/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */ -+#define MDC_CLOCK_MASK 0xff000000 -+#define MDC_CLOCK_OFFSET 24 -+ - /* register information for the gbit's MDIO bus */ - #define MDIO_XR9_REQUEST 0x00008000 - #define MDIO_XR9_READ 0x00000800 -@@ -329,6 +334,9 @@ ltq_etop_gbit_init(struct net_device *de - /* Due to traffic halt when burst length 8, - replace default IPG value with 0x3B */ - ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG); -+ /* set mdc clock to 2.5 MHz */ -+ ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET, -+ LTQ_GBIT_RGMII_CTL); - } - - static int diff --git a/target/linux/lantiq/patches-3.7/0127-lantiq_etop-Fix-supported-modes-flag.patch b/target/linux/lantiq/patches-3.7/0127-lantiq_etop-Fix-supported-modes-flag.patch deleted file mode 100644 index 20e1a75565..0000000000 --- a/target/linux/lantiq/patches-3.7/0127-lantiq_etop-Fix-supported-modes-flag.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 4de6a250878c9ce5605838b65acbddf338a7254a Mon Sep 17 00:00:00 2001 -From: Sebastian Mayr -Date: Thu, 20 Dec 2012 18:52:10 +0100 -Subject: [PATCH 2/2] lantiq_etop: Fix supported modes flag - ---- - drivers/net/ethernet/lantiq_etop.c | 19 ++++++++++--------- - 1 file changed, 10 insertions(+), 9 deletions(-) - ---- a/drivers/net/ethernet/lantiq_etop.c -+++ b/drivers/net/ethernet/lantiq_etop.c -@@ -550,6 +550,13 @@ ltq_etop_mdio_probe(struct net_device *d - { - struct ltq_etop_priv *priv = netdev_priv(dev); - struct phy_device *phydev = NULL; -+ u32 phy_supported = (SUPPORTED_10baseT_Half -+ | SUPPORTED_10baseT_Full -+ | SUPPORTED_100baseT_Half -+ | SUPPORTED_100baseT_Full -+ | SUPPORTED_Autoneg -+ | SUPPORTED_MII -+ | SUPPORTED_TP); - - if (of_machine_is_compatible("lantiq,ase")) - phydev = priv->mii_bus->phy_map[8]; -@@ -569,17 +576,11 @@ ltq_etop_mdio_probe(struct net_device *d - return PTR_ERR(phydev); - } - -- phydev->supported &= (SUPPORTED_10baseT_Half -- | SUPPORTED_10baseT_Full -- | SUPPORTED_100baseT_Half -- | SUPPORTED_100baseT_Full -- | SUPPORTED_Autoneg -- | SUPPORTED_MII -- | SUPPORTED_TP); - if (of_machine_is_compatible("lantiq,ar9")) -- phydev->supported &= SUPPORTED_1000baseT_Half -- | SUPPORTED_1000baseT_Full; -+ phy_supported |= SUPPORTED_1000baseT_Half -+ | SUPPORTED_1000baseT_Full; - -+ phydev->supported &= phy_supported; - phydev->advertising = phydev->supported; - priv->phydev = phydev; - pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n", diff --git a/target/linux/lantiq/patches-3.7/0300-owrt-mtd-split.patch b/target/linux/lantiq/patches-3.7/0300-owrt-mtd-split.patch deleted file mode 100644 index ee5fa73467..0000000000 --- a/target/linux/lantiq/patches-3.7/0300-owrt-mtd-split.patch +++ /dev/null @@ -1,221 +0,0 @@ -From 2a295753a10823a47542c779a25bbb1f52c71281 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 3 Aug 2012 10:27:13 +0200 -Subject: [PATCH 19/25] owrt mtd split - ---- - .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 1 + - arch/mips/lantiq/setup.c | 7 + - drivers/mtd/Kconfig | 4 + - drivers/mtd/mtdpart.c | 173 +++++++++++++++++++- - 4 files changed, 184 insertions(+), 1 deletions(-) - ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -31,6 +31,10 @@ config MTD_ROOTFS_SPLIT - bool "Automatically split 'rootfs' partition for squashfs" - default y - -+config MTD_UIMAGE_SPLIT -+ bool "Automatically split 'linux' partition into 'kernel' and 'rootfs'" -+ default y -+ - config MTD_REDBOOT_PARTS - tristate "RedBoot partition table parsing" - ---help--- ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -844,6 +844,168 @@ static int refresh_rootfs_split(struct m - } - #endif /* CONFIG_MTD_ROOTFS_SPLIT */ - -+#ifdef CONFIG_MTD_UIMAGE_SPLIT -+static unsigned long find_uimage_size(struct mtd_info *mtd, -+ unsigned long offset) -+{ -+#define UBOOT_MAGIC 0x56190527 -+ unsigned long magic = 0; -+ unsigned long temp; -+ size_t len; -+ int ret; -+ -+ ret = mtd_read(mtd, offset, 4, &len, (void *)&magic); -+ if (ret || len != sizeof(magic)) -+ return 0; -+ -+ if (le32_to_cpu(magic) != UBOOT_MAGIC) -+ return 0; -+ -+ ret = mtd_read(mtd, offset + 12, 4, &len, (void *)&temp); -+ if (ret || len != sizeof(temp)) -+ return 0; -+ -+ return temp + 0x40; -+} -+ -+static unsigned long find_eva_size(struct mtd_info *mtd, -+ unsigned long offset) -+{ -+#define EVA_MAGIC 0xfeed1281 -+ unsigned long magic = 0; -+ unsigned long temp; -+ size_t len; -+ int ret; -+ -+ ret = mtd_read(mtd, offset, 4, &len, (void *)&magic); -+ if (ret || len != sizeof(magic)) -+ return 0; -+ -+ if (le32_to_cpu(magic) != EVA_MAGIC) -+ return 0; -+ -+ ret = mtd_read(mtd, offset + 4, 4, &len, (void *)&temp); -+ if (ret || len != sizeof(temp)) -+ return 0; -+ -+ /* add eva header size */ -+ temp = le32_to_cpu(temp) + 0x18; -+ -+ temp &= ~0xffff; -+ temp += 0x10000; -+ return temp; -+} -+ -+static int detect_squashfs_partition(struct mtd_info *mtd, unsigned long offset) -+{ -+ unsigned long temp; -+ size_t len; -+ int ret; -+ -+ ret = mtd_read(mtd, offset, 4, &len, (void *)&temp); -+ if (ret || len != sizeof(temp)) -+ return 0; -+ -+ -+ return le32_to_cpu(temp) == SQUASHFS_MAGIC; -+} -+ -+static int detect_eva_squashfs_partition(struct mtd_info *mtd, unsigned long offset) -+{ -+ unsigned long temp; -+ size_t len; -+ int ret; -+ -+ ret = mtd_read(mtd, offset, 4, &len, (void *)&temp); -+ if (ret || len != sizeof(temp)) -+ return 0; -+ -+ return be32_to_cpu(temp) == SQUASHFS_MAGIC; -+} -+ -+static unsigned long find_brnimage_size(struct mtd_info *mtd, -+ unsigned long offset) -+{ -+ unsigned long buf[4]; -+ // Assume at most 2MB of kernel image -+ unsigned long end = offset + (2 << 20); -+ unsigned long ptr = offset + 0x400 - 12; -+ size_t len; -+ int ret; -+ -+ while (ptr < end) { -+ long size_min = ptr - 0x400 - 12 - offset; -+ long size_max = ptr + 12 - offset; -+ ret = mtd_read(mtd, ptr, 16, &len, (void *)buf); -+ if (ret || len != 16) -+ return 0; -+ -+ if (le32_to_cpu(buf[0]) < size_min || -+ le32_to_cpu(buf[0]) > size_max) { -+ ptr += 0x400; -+ continue; -+ } -+ -+ if (le32_to_cpu(buf[3]) == SQUASHFS_MAGIC) -+ return ptr + 12 - offset; -+ -+ ptr += 0x400; -+ } -+ -+ return 0; -+} -+ -+static int split_uimage(struct mtd_info *mtd, -+ const struct mtd_partition *part) -+{ -+ static struct mtd_partition split_partitions[] = { -+ { -+ .name = "kernel", -+ .offset = 0x0, -+ .size = 0x0, -+ }, { -+ .name = "rootfs", -+ .offset = 0x0, -+ .size = 0x0, -+ }, -+ }; -+ -+ split_partitions[0].size = find_uimage_size(mtd, part->offset); -+ if (!split_partitions[0].size) { -+ split_partitions[0].size = find_eva_size(mtd, part->offset); -+ if (!split_partitions[0].size) { -+ split_partitions[0].size = find_brnimage_size(mtd, part->offset); -+ if (!split_partitions[0].size) { -+ printk(KERN_NOTICE "no uImage or brnImage or eva found in linux partition\n"); -+ return -1; -+ } -+ } -+ } -+ -+ if (detect_eva_squashfs_partition(mtd, -+ part->offset -+ + split_partitions[0].size)) { -+ split_partitions[0].size += 0x100; -+ pr_info("found eva dummy squashfs behind kernel\n"); -+ } else if (!detect_squashfs_partition(mtd, -+ part->offset -+ + split_partitions[0].size)) { -+ split_partitions[0].size &= ~(mtd->erasesize - 1); -+ split_partitions[0].size += mtd->erasesize; -+ } else { -+ pr_info("found squashfs behind kernel\n"); -+ } -+ -+ split_partitions[0].offset = part->offset; -+ split_partitions[1].offset = part->offset + split_partitions[0].size; -+ split_partitions[1].size = part->size - split_partitions[0].size; -+ -+ add_mtd_partitions(mtd, split_partitions, 2); -+ -+ return 0; -+} -+#endif -+ - /* - * This function, given a master MTD object and a partition table, creates - * and registers slave MTD objects which are bound to the master according to -@@ -860,7 +1022,7 @@ int add_mtd_partitions(struct mtd_info * - struct mtd_part *slave; - uint64_t cur_offset = 0; - int i; --#ifdef CONFIG_MTD_ROOTFS_SPLIT -+#if defined(CONFIG_MTD_ROOTFS_SPLIT) || defined(CONFIG_MTD_UIMAGE_SPLIT) - int ret; - #endif - -@@ -877,6 +1039,15 @@ int add_mtd_partitions(struct mtd_info * - - add_mtd_device(&slave->mtd); - -+#ifdef CONFIG_MTD_UIMAGE_SPLIT -+ if (!strcmp(parts[i].name, "linux")) { -+ ret = split_uimage(master, &parts[i]); -+ -+ if (ret) -+ printk(KERN_WARNING "Can't split linux partition\n"); -+ } -+#endif -+ - if (!strcmp(parts[i].name, "rootfs")) { - #ifdef CONFIG_MTD_ROOTFS_ROOT_DEV - if (ROOT_DEV == 0) { diff --git a/target/linux/lantiq/patches-3.7/0301-gptu.patch b/target/linux/lantiq/patches-3.7/0301-gptu.patch deleted file mode 100644 index 4ecf12f6fd..0000000000 --- a/target/linux/lantiq/patches-3.7/0301-gptu.patch +++ /dev/null @@ -1,1013 +0,0 @@ ---- /dev/null -+++ b/arch/mips/lantiq/xway/timer.c -@@ -0,0 +1,845 @@ -+#ifndef CONFIG_SOC_AMAZON_SE -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "../clk.h" -+ -+#include -+#include -+#include -+ -+#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6 -+ -+#ifdef TIMER1A -+#define FIRST_TIMER TIMER1A -+#else -+#define FIRST_TIMER 2 -+#endif -+ -+/* -+ * GPTC divider is set or not. -+ */ -+#define GPTU_CLC_RMC_IS_SET 0 -+ -+/* -+ * Timer Interrupt (IRQ) -+ */ -+/* Must be adjusted when ICU driver is available */ -+#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22) -+ -+/* -+ * Bits Operation -+ */ -+#define GET_BITS(x, msb, lsb) \ -+ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) -+#define SET_BITS(x, msb, lsb, value) \ -+ (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \ -+ (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb))) -+ -+/* -+ * GPTU Register Mapping -+ */ -+#define LQ_GPTU (KSEG1 + 0x1E100A00) -+#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000)) -+#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008)) -+#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4)) -+#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8)) -+#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC)) -+ -+/* -+ * Clock Control Register -+ */ -+#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16) -+#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8) -+#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5)) -+#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3)) -+#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2)) -+#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1)) -+#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0)) -+ -+#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value)) -+#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value)) -+#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0) -+#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0) -+#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0) -+#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0) -+#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0) -+ -+/* -+ * ID Register -+ */ -+#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8) -+#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5) -+#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0) -+ -+/* -+ * Control Register of Timer/Counter nX -+ * n is the index of block (1 based index) -+ * X is either A or B -+ */ -+#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10)) -+#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9)) -+#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8)) -+#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6) -+#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5)) -+#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */ -+#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3)) -+#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2)) -+#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1)) -+#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0)) -+ -+#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10)) -+#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0) -+#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0) -+#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value)) -+#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0) -+#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0) -+#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0) -+#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0) -+#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0) -+ -+#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0) -+#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0) -+#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0) -+ -+#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) -+#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) -+ -+#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001) -+#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002) -+#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004) -+#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008) -+#define TIMER_FLAG_NONE_EDGE 0x0000 -+#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030) -+#define TIMER_FLAG_REAL 0x0000 -+#define TIMER_FLAG_INVERT 0x0040 -+#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040) -+#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070) -+#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080) -+#define TIMER_FLAG_CALLBACK_IN_HB 0x0200 -+#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300) -+#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000) -+ -+struct timer_dev_timer { -+ unsigned int f_irq_on; -+ unsigned int irq; -+ unsigned int flag; -+ unsigned long arg1; -+ unsigned long arg2; -+}; -+ -+struct timer_dev { -+ struct mutex gptu_mutex; -+ unsigned int number_of_timers; -+ unsigned int occupation; -+ unsigned int f_gptu_on; -+ struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2]; -+}; -+ -+ -+unsigned int ltq_get_fpi_bus_clock(int fpi) { -+ struct clk *clk = clk_get_fpi(); -+ return clk_get_rate(clk); -+} -+ -+ -+static long gptu_ioctl(struct file *, unsigned int, unsigned long); -+static int gptu_open(struct inode *, struct file *); -+static int gptu_release(struct inode *, struct file *); -+ -+static struct file_operations gptu_fops = { -+ .owner = THIS_MODULE, -+ .unlocked_ioctl = gptu_ioctl, -+ .open = gptu_open, -+ .release = gptu_release -+}; -+ -+static struct miscdevice gptu_miscdev = { -+ .minor = MISC_DYNAMIC_MINOR, -+ .name = "gptu", -+ .fops = &gptu_fops, -+}; -+ -+static struct timer_dev timer_dev; -+ -+static irqreturn_t timer_irq_handler(int irq, void *p) -+{ -+ unsigned int timer; -+ unsigned int flag; -+ struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p; -+ -+ timer = irq - TIMER_INTERRUPT; -+ if (timer < timer_dev.number_of_timers -+ && dev_timer == &timer_dev.timer[timer]) { -+ /* Clear interrupt. */ -+ ltq_w32(1 << timer, LQ_GPTU_IRNCR); -+ -+ /* Call user hanler or signal. */ -+ flag = dev_timer->flag; -+ if (!(timer & 0x01) -+ || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { -+ /* 16-bit timer or timer A of 32-bit timer */ -+ switch (TIMER_FLAG_MASK_HANDLE(flag)) { -+ case TIMER_FLAG_CALLBACK_IN_IRQ: -+ case TIMER_FLAG_CALLBACK_IN_HB: -+ if (dev_timer->arg1) -+ (*(timer_callback)dev_timer->arg1)(dev_timer->arg2); -+ break; -+ case TIMER_FLAG_SIGNAL: -+ send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0); -+ break; -+ } -+ } -+ } -+ return IRQ_HANDLED; -+} -+ -+static inline void lq_enable_gptu(void) -+{ -+ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL); -+ clk_enable(clk); -+ -+ //ltq_pmu_enable(PMU_GPT); -+ -+ /* Set divider as 1, disable write protection for SPEN, enable module. */ -+ *LQ_GPTU_CLC = -+ GPTU_CLC_SMC_SET(0x00) | -+ GPTU_CLC_RMC_SET(0x01) | -+ GPTU_CLC_FSOE_SET(0) | -+ GPTU_CLC_SBWE_SET(1) | -+ GPTU_CLC_EDIS_SET(0) | -+ GPTU_CLC_SPEN_SET(0) | -+ GPTU_CLC_DISR_SET(0); -+} -+ -+static inline void lq_disable_gptu(void) -+{ -+ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL); -+ ltq_w32(0x00, LQ_GPTU_IRNEN); -+ ltq_w32(0xfff, LQ_GPTU_IRNCR); -+ -+ /* Set divider as 0, enable write protection for SPEN, disable module. */ -+ *LQ_GPTU_CLC = -+ GPTU_CLC_SMC_SET(0x00) | -+ GPTU_CLC_RMC_SET(0x00) | -+ GPTU_CLC_FSOE_SET(0) | -+ GPTU_CLC_SBWE_SET(0) | -+ GPTU_CLC_EDIS_SET(0) | -+ GPTU_CLC_SPEN_SET(0) | -+ GPTU_CLC_DISR_SET(1); -+ -+ clk_enable(clk); -+} -+ -+int lq_request_timer(unsigned int timer, unsigned int flag, -+ unsigned long value, unsigned long arg1, unsigned long arg2) -+{ -+ int ret = 0; -+ unsigned int con_reg, irnen_reg; -+ int n, X; -+ -+ if (timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...", -+ timer, flag, value); -+ -+ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) -+ value &= 0xFFFF; -+ else -+ timer &= ~0x01; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ /* -+ * Allocate timer. -+ */ -+ if (timer < FIRST_TIMER) { -+ unsigned int mask; -+ unsigned int shift; -+ /* This takes care of TIMER1B which is the only choice for Voice TAPI system */ -+ unsigned int offset = TIMER2A; -+ -+ /* -+ * Pick up a free timer. -+ */ -+ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { -+ mask = 1 << offset; -+ shift = 1; -+ } else { -+ mask = 3 << offset; -+ shift = 2; -+ } -+ for (timer = offset; -+ timer < offset + timer_dev.number_of_timers; -+ timer += shift, mask <<= shift) -+ if (!(timer_dev.occupation & mask)) { -+ timer_dev.occupation |= mask; -+ break; -+ } -+ if (timer >= offset + timer_dev.number_of_timers) { -+ printk("failed![%d]\n", __LINE__); -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } else -+ ret = timer; -+ } else { -+ register unsigned int mask; -+ -+ /* -+ * Check if the requested timer is free. -+ */ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if ((timer_dev.occupation & mask)) { -+ printk("failed![%d] mask %#x, timer_dev.occupation %#x\n", -+ __LINE__, mask, timer_dev.occupation); -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EBUSY; -+ } else { -+ timer_dev.occupation |= mask; -+ ret = 0; -+ } -+ } -+ -+ /* -+ * Prepare control register value. -+ */ -+ switch (TIMER_FLAG_MASK_EDGE(flag)) { -+ default: -+ case TIMER_FLAG_NONE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x00); -+ break; -+ case TIMER_FLAG_RISE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x01); -+ break; -+ case TIMER_FLAG_FALL_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x02); -+ break; -+ case TIMER_FLAG_ANY_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x03); -+ break; -+ } -+ if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER) -+ con_reg |= -+ TIMER_FLAG_MASK_SRC(flag) == -+ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : -+ GPTU_CON_SRC_EXT_SET(0); -+ else -+ con_reg |= -+ TIMER_FLAG_MASK_SRC(flag) == -+ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : -+ GPTU_CON_SRC_EG_SET(0); -+ con_reg |= -+ TIMER_FLAG_MASK_SYNC(flag) == -+ TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : -+ GPTU_CON_SYNC_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_INVERT(flag) == -+ TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_SIZE(flag) == -+ TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : -+ GPTU_CON_EXT_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_STOP(flag) == -+ TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); -+ con_reg |= -+ TIMER_FLAG_MASK_TYPE(flag) == -+ TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : -+ GPTU_CON_CNT_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_DIR(flag) == -+ TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); -+ -+ /* -+ * Fill up running data. -+ */ -+ timer_dev.timer[timer - FIRST_TIMER].flag = flag; -+ timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1; -+ timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag; -+ -+ /* -+ * Enable GPTU module. -+ */ -+ if (!timer_dev.f_gptu_on) { -+ lq_enable_gptu(); -+ timer_dev.f_gptu_on = 1; -+ } -+ -+ /* -+ * Enable IRQ. -+ */ -+ if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) { -+ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL) -+ timer_dev.timer[timer - FIRST_TIMER].arg1 = -+ (unsigned long) find_task_by_vpid((int) arg1); -+ -+ irnen_reg = 1 << (timer - FIRST_TIMER); -+ -+ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL -+ || (TIMER_FLAG_MASK_HANDLE(flag) == -+ TIMER_FLAG_CALLBACK_IN_IRQ -+ && timer_dev.timer[timer - FIRST_TIMER].arg1)) { -+ enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); -+ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1; -+ } -+ } else -+ irnen_reg = 0; -+ -+ /* -+ * Write config register, reload value and enable interrupt. -+ */ -+ n = timer >> 1; -+ X = timer & 0x01; -+ *LQ_GPTU_CON(n, X) = con_reg; -+ *LQ_GPTU_RELOAD(n, X) = value; -+ /* printk("reload value = %d\n", (u32)value); */ -+ *LQ_GPTU_IRNEN |= irnen_reg; -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ printk("successful!\n"); -+ return ret; -+} -+EXPORT_SYMBOL(lq_request_timer); -+ -+int lq_free_timer(unsigned int timer) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ if (GPTU_CON_EN(n, X)) -+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); -+ -+ *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1); -+ *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1); -+ -+ if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) { -+ disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); -+ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0; -+ } -+ -+ timer_dev.occupation &= ~mask; -+ if (!timer_dev.occupation && timer_dev.f_gptu_on) { -+ lq_disable_gptu(); -+ timer_dev.f_gptu_on = 0; -+ } -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_free_timer); -+ -+int lq_start_timer(unsigned int timer, int is_resume) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == -+ TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1); -+ -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_start_timer); -+ -+int lq_stop_timer(unsigned int timer) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER -+ || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_stop_timer); -+ -+int lq_reset_counter_flags(u32 timer, u32 flags) -+{ -+ unsigned int oflag; -+ unsigned int mask, con_reg; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ oflag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ switch (TIMER_FLAG_MASK_EDGE(flags)) { -+ default: -+ case TIMER_FLAG_NONE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x00); -+ break; -+ case TIMER_FLAG_RISE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x01); -+ break; -+ case TIMER_FLAG_FALL_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x02); -+ break; -+ case TIMER_FLAG_ANY_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x03); -+ break; -+ } -+ if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER) -+ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0); -+ else -+ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0); -+ con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1); -+ con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); -+ con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1); -+ con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); -+ con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1); -+ con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); -+ -+ timer_dev.timer[timer - FIRST_TIMER].flag = flags; -+ if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT) -+ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags; -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *LQ_GPTU_CON(n, X) = con_reg; -+ smp_wmb(); -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return 0; -+} -+EXPORT_SYMBOL(lq_reset_counter_flags); -+ -+int lq_get_count_value(unsigned int timer, unsigned long *value) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER -+ || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *value = *LQ_GPTU_COUNT(n, X); -+ -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_get_count_value); -+ -+u32 lq_cal_divider(unsigned long freq) -+{ -+ u64 module_freq, fpi = ltq_get_fpi_bus_clock(2); -+ u32 clock_divider = 1; -+ module_freq = fpi * 1000; -+ do_div(module_freq, clock_divider * freq); -+ return module_freq; -+} -+EXPORT_SYMBOL(lq_cal_divider); -+ -+int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic, -+ int is_ext_src, unsigned int handle_flag, unsigned long arg1, -+ unsigned long arg2) -+{ -+ unsigned long divider; -+ unsigned int flag; -+ -+ divider = lq_cal_divider(freq); -+ if (divider == 0) -+ return -EINVAL; -+ flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT) -+ | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE) -+ | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC) -+ | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN -+ | TIMER_FLAG_MASK_HANDLE(handle_flag); -+ -+ printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n", -+ timer, freq, divider); -+ return lq_request_timer(timer, flag, divider, arg1, arg2); -+} -+EXPORT_SYMBOL(lq_set_timer); -+ -+int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload, -+ unsigned long arg1, unsigned long arg2) -+{ -+ printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload); -+ return lq_request_timer(timer, flag, reload, arg1, arg2); -+} -+EXPORT_SYMBOL(lq_set_counter); -+ -+static long gptu_ioctl(struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ int ret; -+ struct gptu_ioctl_param param; -+ -+ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param))) -+ return -EFAULT; -+ copy_from_user(¶m, (void *) arg, sizeof(param)); -+ -+ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER -+ || GPTU_SET_COUNTER) && param.timer < 2) -+ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER) -+ && !access_ok(VERIFY_WRITE, arg, -+ sizeof(struct gptu_ioctl_param))) -+ return -EFAULT; -+ -+ switch (cmd) { -+ case GPTU_REQUEST_TIMER: -+ ret = lq_request_timer(param.timer, param.flag, param.value, -+ (unsigned long) param.pid, -+ (unsigned long) param.sig); -+ if (ret > 0) { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ timer, &ret, sizeof(&ret)); -+ ret = 0; -+ } -+ break; -+ case GPTU_FREE_TIMER: -+ ret = lq_free_timer(param.timer); -+ break; -+ case GPTU_START_TIMER: -+ ret = lq_start_timer(param.timer, param.flag); -+ break; -+ case GPTU_STOP_TIMER: -+ ret = lq_stop_timer(param.timer); -+ break; -+ case GPTU_GET_COUNT_VALUE: -+ ret = lq_get_count_value(param.timer, ¶m.value); -+ if (!ret) -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ value, ¶m.value, -+ sizeof(param.value)); -+ break; -+ case GPTU_CALCULATE_DIVIDER: -+ param.value = lq_cal_divider(param.value); -+ if (param.value == 0) -+ ret = -EINVAL; -+ else { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ value, ¶m.value, -+ sizeof(param.value)); -+ ret = 0; -+ } -+ break; -+ case GPTU_SET_TIMER: -+ ret = lq_set_timer(param.timer, param.value, -+ TIMER_FLAG_MASK_STOP(param.flag) != -+ TIMER_FLAG_ONCE ? 1 : 0, -+ TIMER_FLAG_MASK_SRC(param.flag) == -+ TIMER_FLAG_EXT_SRC ? 1 : 0, -+ TIMER_FLAG_MASK_HANDLE(param.flag) == -+ TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL : -+ TIMER_FLAG_NO_HANDLE, -+ (unsigned long) param.pid, -+ (unsigned long) param.sig); -+ if (ret > 0) { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ timer, &ret, sizeof(&ret)); -+ ret = 0; -+ } -+ break; -+ case GPTU_SET_COUNTER: -+ lq_set_counter(param.timer, param.flag, param.value, 0, 0); -+ if (ret > 0) { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ timer, &ret, sizeof(&ret)); -+ ret = 0; -+ } -+ break; -+ default: -+ ret = -ENOTTY; -+ } -+ -+ return ret; -+} -+ -+static int gptu_open(struct inode *inode, struct file *file) -+{ -+ return 0; -+} -+ -+static int gptu_release(struct inode *inode, struct file *file) -+{ -+ return 0; -+} -+ -+int __init lq_gptu_init(void) -+{ -+ int ret; -+ unsigned int i; -+ -+ ltq_w32(0, LQ_GPTU_IRNEN); -+ ltq_w32(0xfff, LQ_GPTU_IRNCR); -+ -+ memset(&timer_dev, 0, sizeof(timer_dev)); -+ mutex_init(&timer_dev.gptu_mutex); -+ -+ lq_enable_gptu(); -+ timer_dev.number_of_timers = GPTU_ID_CFG * 2; -+ lq_disable_gptu(); -+ if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2) -+ timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2; -+ printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers); -+ -+ ret = misc_register(&gptu_miscdev); -+ if (ret) { -+ printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret); -+ return ret; -+ } else { -+ printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor); -+ } -+ -+ for (i = 0; i < timer_dev.number_of_timers; i++) { -+ ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]); -+ if (ret) { -+ for (; i >= 0; i--) -+ free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]); -+ misc_deregister(&gptu_miscdev); -+ printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret); -+ return ret; -+ } else { -+ timer_dev.timer[i].irq = TIMER_INTERRUPT + i; -+ disable_irq(timer_dev.timer[i].irq); -+ printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq); -+ } -+ } -+ -+ return 0; -+} -+ -+void __exit lq_gptu_exit(void) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < timer_dev.number_of_timers; i++) { -+ if (timer_dev.timer[i].f_irq_on) -+ disable_irq(timer_dev.timer[i].irq); -+ free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]); -+ } -+ lq_disable_gptu(); -+ misc_deregister(&gptu_miscdev); -+} -+ -+module_init(lq_gptu_init); -+module_exit(lq_gptu_exit); -+ -+#endif ---- /dev/null -+++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h -@@ -0,0 +1,155 @@ -+#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ -+#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ -+ -+ -+/****************************************************************************** -+ Copyright (c) 2002, Infineon Technologies. All rights reserved. -+ -+ No Warranty -+ Because the program is licensed free of charge, there is no warranty for -+ the program, to the extent permitted by applicable law. Except when -+ otherwise stated in writing the copyright holders and/or other parties -+ provide the program "as is" without warranty of any kind, either -+ expressed or implied, including, but not limited to, the implied -+ warranties of merchantability and fitness for a particular purpose. The -+ entire risk as to the quality and performance of the program is with -+ you. should the program prove defective, you assume the cost of all -+ necessary servicing, repair or correction. -+ -+ In no event unless required by applicable law or agreed to in writing -+ will any copyright holder, or any other party who may modify and/or -+ redistribute the program as permitted above, be liable to you for -+ damages, including any general, special, incidental or consequential -+ damages arising out of the use or inability to use the program -+ (including but not limited to loss of data or data being rendered -+ inaccurate or losses sustained by you or third parties or a failure of -+ the program to operate with any other programs), even if such holder or -+ other party has been advised of the possibility of such damages. -+******************************************************************************/ -+ -+ -+/* -+ * #################################### -+ * Definition -+ * #################################### -+ */ -+ -+/* -+ * Available Timer/Counter Index -+ */ -+#define TIMER(n, X) (n * 2 + (X ? 1 : 0)) -+#define TIMER_ANY 0x00 -+#define TIMER1A TIMER(1, 0) -+#define TIMER1B TIMER(1, 1) -+#define TIMER2A TIMER(2, 0) -+#define TIMER2B TIMER(2, 1) -+#define TIMER3A TIMER(3, 0) -+#define TIMER3B TIMER(3, 1) -+ -+/* -+ * Flag of Timer/Counter -+ * These flags specify the way in which timer is configured. -+ */ -+/* Bit size of timer/counter. */ -+#define TIMER_FLAG_16BIT 0x0000 -+#define TIMER_FLAG_32BIT 0x0001 -+/* Switch between timer and counter. */ -+#define TIMER_FLAG_TIMER 0x0000 -+#define TIMER_FLAG_COUNTER 0x0002 -+/* Stop or continue when overflowing/underflowing. */ -+#define TIMER_FLAG_ONCE 0x0000 -+#define TIMER_FLAG_CYCLIC 0x0004 -+/* Count up or counter down. */ -+#define TIMER_FLAG_UP 0x0000 -+#define TIMER_FLAG_DOWN 0x0008 -+/* Count on specific level or edge. */ -+#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000 -+#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040 -+#define TIMER_FLAG_RISE_EDGE 0x0010 -+#define TIMER_FLAG_FALL_EDGE 0x0020 -+#define TIMER_FLAG_ANY_EDGE 0x0030 -+/* Signal is syncronous to module clock or not. */ -+#define TIMER_FLAG_UNSYNC 0x0000 -+#define TIMER_FLAG_SYNC 0x0080 -+/* Different interrupt handle type. */ -+#define TIMER_FLAG_NO_HANDLE 0x0000 -+#if defined(__KERNEL__) -+ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100 -+#endif // defined(__KERNEL__) -+#define TIMER_FLAG_SIGNAL 0x0300 -+/* Internal clock source or external clock source */ -+#define TIMER_FLAG_INT_SRC 0x0000 -+#define TIMER_FLAG_EXT_SRC 0x1000 -+ -+ -+/* -+ * ioctl Command -+ */ -+#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */ -+#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */ -+#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */ -+#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */ -+#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */ -+#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/ -+#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */ -+#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */ -+ -+/* -+ * Data Type Used to Call ioctl -+ */ -+struct gptu_ioctl_param { -+ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * -+ * GPTU_SET_COUNTER, this field is ID of expected * -+ * timer/counter. If it's zero, a timer/counter would * -+ * be dynamically allocated and ID would be stored in * -+ * this field. * -+ * In command GPTU_GET_COUNT_VALUE, this field is * -+ * ignored. * -+ * In other command, this field is ID of timer/counter * -+ * allocated. */ -+ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * -+ * GPTU_SET_COUNTER, this field contains flags to * -+ * specify how to configure timer/counter. * -+ * In command GPTU_START_TIMER, zero indicate start * -+ * and non-zero indicate resume timer/counter. * -+ * In other command, this field is ignored. */ -+ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains * -+ * init/reload value. * -+ * In command GPTU_SET_TIMER, this field contains * -+ * frequency (0.001Hz) of timer. * -+ * In command GPTU_GET_COUNT_VALUE, current count * -+ * value would be stored in this field. * -+ * In command GPTU_CALCULATE_DIVIDER, this field * -+ * contains frequency wanted, and after calculation, * -+ * divider would be stored in this field to overwrite * -+ * the frequency. * -+ * In other command, this field is ignored. */ -+ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * -+ * if signal is required, this field contains process * -+ * ID to which signal would be sent. * -+ * In other command, this field is ignored. */ -+ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * -+ * if signal is required, this field contains signal * -+ * number which would be sent. * -+ * In other command, this field is ignored. */ -+}; -+ -+/* -+ * #################################### -+ * Data Type -+ * #################################### -+ */ -+typedef void (*timer_callback)(unsigned long arg); -+ -+extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long); -+extern int lq_free_timer(unsigned int); -+extern int lq_start_timer(unsigned int, int); -+extern int lq_stop_timer(unsigned int); -+extern int lq_reset_counter_flags(u32 timer, u32 flags); -+extern int lq_get_count_value(unsigned int, unsigned long *); -+extern u32 lq_cal_divider(unsigned long); -+extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long); -+extern int lq_set_counter(unsigned int timer, unsigned int flag, -+ u32 reload, unsigned long arg1, unsigned long arg2); -+ -+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ ---- a/arch/mips/lantiq/xway/Makefile -+++ b/arch/mips/lantiq/xway/Makefile -@@ -1,3 +1,3 @@ --obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o -+obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o - - obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o diff --git a/target/linux/lantiq/patches-3.7/0302-wifi-eep.patch b/target/linux/lantiq/patches-3.7/0302-wifi-eep.patch deleted file mode 100644 index 8932dfb726..0000000000 --- a/target/linux/lantiq/patches-3.7/0302-wifi-eep.patch +++ /dev/null @@ -1,504 +0,0 @@ ---- a/arch/mips/lantiq/xway/Makefile -+++ b/arch/mips/lantiq/xway/Makefile -@@ -1,3 +1,6 @@ - obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o - -+obj-y += eth_mac.o -+obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o -+ - obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o ---- /dev/null -+++ b/arch/mips/lantiq/xway/ath_eep.c -@@ -0,0 +1,195 @@ -+/* -+ * Copyright (C) 2011 Luca Olivetti -+ * Copyright (C) 2011 John Crispin -+ * Copyright (C) 2011 Andrej VlaÅ¡ić -+ * Copyright (C) 2013 Álvaro Fernández Rojas -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev); -+struct ath5k_platform_data ath5k_pdata; -+struct ath9k_platform_data ath9k_pdata = { -+ .led_pin = -1, -+}; -+static u8 athxk_eeprom_mac[6]; -+ -+static int ath9k_pci_plat_dev_init(struct pci_dev *dev) -+{ -+ dev->dev.platform_data = &ath9k_pdata; -+ return 0; -+} -+ -+int __init of_ath9k_eeprom_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct resource *eep_res, *mac_res; -+ void __iomem *eep, *mac; -+ int mac_offset; -+ u32 mac_inc = 0, pci_slot = 0; -+ int i; -+ -+ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ -+ if (!eep_res) { -+ dev_err(&pdev->dev, "failed to load eeprom address\n"); -+ return -ENODEV; -+ } -+ if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS << 1) { -+ dev_err(&pdev->dev, "eeprom has an invalid size\n"); -+ return -EINVAL; -+ } -+ -+ eep = ioremap(eep_res->start, resource_size(eep_res)); -+ memcpy_fromio(ath9k_pdata.eeprom_data, eep, ATH9K_PLAT_EEP_MAX_WORDS << 1); -+ -+ if (of_find_property(np, "ath,eep-swap", NULL)) -+ for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++) -+ ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]); -+ -+ if (of_find_property(np, "ath,eep-endian", NULL)) { -+ ath9k_pdata.endian_check = true; -+ -+ dev_info(&pdev->dev, "endian check enabled.\n"); -+ } -+ -+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) { -+ memcpy_fromio(athxk_eeprom_mac, (void*) ath9k_pdata.eeprom_data + mac_offset, 6); -+ } else if (mac_res) { -+ if (resource_size(mac_res) != 6) { -+ dev_err(&pdev->dev, "mac has an invalid size\n"); -+ return -EINVAL; -+ } -+ mac = ioremap(mac_res->start, resource_size(mac_res)); -+ memcpy_fromio(athxk_eeprom_mac, mac, 6); -+ } else { -+ dev_warn(&pdev->dev, "using random mac\n"); -+ random_ether_addr(athxk_eeprom_mac); -+ } -+ -+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc)) -+ athxk_eeprom_mac[5] += mac_inc; -+ -+ ath9k_pdata.macaddr = athxk_eeprom_mac; -+ ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init; -+ -+ if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) { -+ ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data); -+ -+ dev_info(&pdev->dev, "pci slot: %u\n", pci_slot); -+ } -+ -+ dev_info(&pdev->dev, "loaded ath9k eeprom\n"); -+ -+ return 0; -+} -+ -+static struct of_device_id ath9k_eeprom_ids[] = { -+ { .compatible = "ath9k,eeprom" }, -+ { } -+}; -+ -+static struct platform_driver ath9k_eeprom_driver = { -+ .driver = { -+ .name = "ath9k,eeprom", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(ath9k_eeprom_ids), -+ }, -+}; -+ -+static int __init of_ath9k_eeprom_init(void) -+{ -+ return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe); -+} -+late_initcall(of_ath9k_eeprom_init); -+ -+ -+static int ath5k_pci_plat_dev_init(struct pci_dev *dev) -+{ -+ dev->dev.platform_data = &ath5k_pdata; -+ return 0; -+} -+ -+int __init of_ath5k_eeprom_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct resource *eep_res, *mac_res; -+ void __iomem *eep, *mac; -+ int mac_offset; -+ u32 mac_inc = 0; -+ int i; -+ -+ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ -+ if (!eep_res) { -+ dev_err(&pdev->dev, "failed to load eeprom address\n"); -+ return -ENODEV; -+ } -+ if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS << 1) { -+ dev_err(&pdev->dev, "eeprom has an invalid size\n"); -+ return -EINVAL; -+ } -+ -+ eep = ioremap(eep_res->start, resource_size(eep_res)); -+ memcpy_fromio(ath5k_pdata.eeprom_data, eep, ATH5K_PLAT_EEP_MAX_WORDS << 1); -+ -+ if (of_find_property(np, "ath,eep-swap", NULL)) -+ for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++) -+ ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]); -+ -+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) { -+ memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6); -+ } else if (mac_res) { -+ if (resource_size(mac_res) != 6) { -+ dev_err(&pdev->dev, "mac has an invalid size\n"); -+ return -EINVAL; -+ } -+ mac = ioremap(mac_res->start, resource_size(mac_res)); -+ memcpy_fromio(athxk_eeprom_mac, mac, 6); -+ } else { -+ dev_warn(&pdev->dev, "using random mac\n"); -+ random_ether_addr(athxk_eeprom_mac); -+ } -+ -+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc)) -+ athxk_eeprom_mac[5] += mac_inc; -+ -+ ath5k_pdata.macaddr = athxk_eeprom_mac; -+ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init; -+ -+ dev_info(&pdev->dev, "loaded ath5k eeprom\n"); -+ -+ return 0; -+} -+ -+static struct of_device_id ath5k_eeprom_ids[] = { -+ { .compatible = "ath5k,eeprom" }, -+ { } -+}; -+ -+static struct platform_driver ath5k_eeprom_driver = { -+ .driver = { -+ .name = "ath5k,eeprom", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(ath5k_eeprom_ids), -+ }, -+}; -+ -+static int __init of_ath5k_eeprom_init(void) -+{ -+ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe); -+} -+late_initcall(of_ath5k_eeprom_init); ---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h -+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h -@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev, - extern void ltq_pmu_enable(unsigned int module); - extern void ltq_pmu_disable(unsigned int module); - -+/* allow the ethernet driver to load a flash mapped mac addr */ -+const u8* ltq_get_eth_mac(void); -+ - #endif /* CONFIG_SOC_TYPE_XWAY */ - #endif /* _LTQ_XWAY_H__ */ ---- /dev/null -+++ b/arch/mips/lantiq/xway/eth_mac.c -@@ -0,0 +1,76 @@ -+/* -+ * Copyright (C) 2012 John Crispin -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+static u8 eth_mac[6]; -+static int eth_mac_set; -+ -+const u8* ltq_get_eth_mac(void) -+{ -+ return eth_mac; -+} -+ -+static int __init setup_ethaddr(char *str) -+{ -+ eth_mac_set = mac_pton(str, eth_mac); -+ return !eth_mac_set; -+} -+__setup("ethaddr=", setup_ethaddr); -+ -+int __init of_eth_mac_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct resource *mac_res; -+ void __iomem *mac; -+ u32 mac_inc = 0; -+ -+ if (eth_mac_set) { -+ dev_err(&pdev->dev, "mac was already set by bootloader\n"); -+ return -EINVAL; -+ } -+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ -+ if (!mac_res) { -+ dev_err(&pdev->dev, "failed to load mac\n"); -+ return -EINVAL; -+ } -+ if (resource_size(mac_res) != 6) { -+ dev_err(&pdev->dev, "mac has an invalid size\n"); -+ return -EINVAL; -+ } -+ mac = ioremap(mac_res->start, resource_size(mac_res)); -+ memcpy_fromio(eth_mac, mac, 6); -+ -+ if (!of_property_read_u32(np, "mac-increment", &mac_inc)) -+ eth_mac[5] += mac_inc; -+ -+ return 0; -+} -+ -+static struct of_device_id eth_mac_ids[] = { -+ { .compatible = "lantiq,eth-mac" }, -+ { /* sentinel */ } -+}; -+ -+static struct platform_driver eth_mac_driver = { -+ .driver = { -+ .name = "lantiq,eth-mac", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(eth_mac_ids), -+ }, -+}; -+ -+static int __init of_eth_mac_init(void) -+{ -+ return platform_driver_probe(ð_mac_driver, of_eth_mac_probe); -+} -+device_initcall(of_eth_mac_init); ---- a/drivers/net/ethernet/lantiq_etop.c -+++ b/drivers/net/ethernet/lantiq_etop.c -@@ -825,7 +825,8 @@ ltq_etop_init(struct net_device *dev) - - ltq_etop_change_mtu(dev, 1500); - -- memcpy(&mac.sa_data, priv->mac, ETH_ALEN); -+ if (priv->mac) -+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); - if (!is_valid_ether_addr(mac.sa_data)) { - pr_warn("etop: invalid MAC, using random\n"); - random_ether_addr(mac.sa_data); -@@ -949,7 +950,9 @@ ltq_etop_probe(struct platform_device *p - priv->tx_irq = irqres[0].start; - priv->rx_irq = irqres[1].start; - priv->mii_mode = of_get_phy_mode(pdev->dev.of_node); -- priv->mac = of_get_mac_address(pdev->dev.of_node); -+ priv->mac = ltq_get_eth_mac(); -+ if (!priv->mac) -+ priv->mac = of_get_mac_address(pdev->dev.of_node); - - priv->clk_ppe = clk_get(&pdev->dev, NULL); - if (IS_ERR(priv->clk_ppe)) ---- /dev/null -+++ b/arch/mips/lantiq/xway/rt_eep.c -@@ -0,0 +1,60 @@ -+/* -+ * Copyright (C) 2011 John Crispin -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev); -+static struct rt2x00_platform_data rt2x00_pdata; -+ -+static int rt2x00_pci_plat_dev_init(struct pci_dev *dev) -+{ -+ dev->dev.platform_data = &rt2x00_pdata; -+ return 0; -+} -+ -+int __init of_ralink_eeprom_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ const char *eeprom; -+ -+ if (of_property_read_string(np, "ralink,eeprom", &eeprom)) { -+ dev_err(&pdev->dev, "failed to load eeprom filename\n"); -+ return 0; -+ } -+ -+ rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL); -+// rt2x00_pdata.mac_address = mac; -+ ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init; -+ -+ dev_info(&pdev->dev, "using %s as eeprom\n", eeprom); -+ -+ return 0; -+} -+ -+static struct of_device_id ralink_eeprom_ids[] = { -+ { .compatible = "ralink,eeprom" }, -+ { } -+}; -+ -+static struct platform_driver ralink_eeprom_driver = { -+ .driver = { -+ .name = "ralink,eeprom", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(ralink_eeprom_ids), -+ }, -+}; -+ -+static int __init of_ralink_eeprom_init(void) -+{ -+ return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe); -+} -+device_initcall(of_ralink_eeprom_init); ---- /dev/null -+++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h -@@ -0,0 +1,6 @@ -+#ifndef _PCI_ATH_FIXUP -+#define _PCI_ATH_FIXUP -+ -+void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init; -+ -+#endif /* _PCI_ATH_FIXUP */ ---- /dev/null -+++ b/arch/mips/lantiq/xway/pci-ath-fixup.c -@@ -0,0 +1,109 @@ -+/* -+ * Atheros AP94 reference board PCI initialization -+ * -+ * Copyright (C) 2009-2010 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#define LTQ_PCI_MEM_BASE 0x18000000 -+ -+struct ath_fixup { -+ u16 *cal_data; -+ unsigned slot; -+}; -+ -+static int ath_num_fixups; -+static struct ath_fixup ath_fixups[2]; -+ -+static void ath_pci_fixup(struct pci_dev *dev) -+{ -+ void __iomem *mem; -+ u16 *cal_data = NULL; -+ u16 cmd; -+ u32 bar0; -+ u32 val; -+ unsigned i; -+ -+ for (i = 0; i < ath_num_fixups; i++) { -+ if (ath_fixups[i].cal_data == NULL) -+ continue; -+ -+ if (ath_fixups[i].slot != PCI_SLOT(dev->devfn)) -+ continue; -+ -+ cal_data = ath_fixups[i].cal_data; -+ break; -+ } -+ -+ if (cal_data == NULL) -+ return; -+ -+ if (*cal_data != 0xa55a) { -+ pr_err("pci %s: invalid calibration data\n", pci_name(dev)); -+ return; -+ } -+ -+ pr_info("pci %s: fixup device configuration\n", pci_name(dev)); -+ -+ mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000); -+ if (!mem) { -+ pr_err("pci %s: ioremap error\n", pci_name(dev)); -+ return; -+ } -+ -+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE); -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ -+ /* set pointer to first reg address */ -+ cal_data += 3; -+ while (*cal_data != 0xffff) { -+ u32 reg; -+ reg = *cal_data++; -+ val = *cal_data++; -+ val |= (*cal_data++) << 16; -+ -+ ltq_w32(swab32(val), mem + reg); -+ udelay(100); -+ } -+ -+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val); -+ dev->vendor = val & 0xffff; -+ dev->device = (val >> 16) & 0xffff; -+ -+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); -+ dev->revision = val & 0xff; -+ dev->class = val >> 8; /* upper 3 bytes */ -+ -+ pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n", -+ pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class); -+ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); -+ -+ iounmap(mem); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup); -+ -+void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) -+{ -+ if (ath_num_fixups >= ARRAY_SIZE(ath_fixups)) -+ return; -+ -+ ath_fixups[ath_num_fixups].slot = slot; -+ ath_fixups[ath_num_fixups].cal_data = cal_data; -+ ath_num_fixups++; -+} diff --git a/target/linux/lantiq/patches-3.7/0303-vmmc.patch b/target/linux/lantiq/patches-3.7/0303-vmmc.patch deleted file mode 100644 index 0d6d0e8417..0000000000 --- a/target/linux/lantiq/patches-3.7/0303-vmmc.patch +++ /dev/null @@ -1,76 +0,0 @@ ---- a/arch/mips/lantiq/xway/Makefile -+++ b/arch/mips/lantiq/xway/Makefile -@@ -1,6 +1,6 @@ - obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o - --obj-y += eth_mac.o -+obj-y += eth_mac.o vmmc.o - obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o - - obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o ---- /dev/null -+++ b/arch/mips/lantiq/xway/vmmc.c -@@ -0,0 +1,63 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2012 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+static unsigned int *cp1_base = 0; -+unsigned int* ltq_get_cp1_base(void) -+{ -+ if (!cp1_base) -+ panic("no cp1 base was set\n"); -+ return cp1_base; -+} -+EXPORT_SYMBOL(ltq_get_cp1_base); -+ -+static int __devinit vmmc_probe(struct platform_device *pdev) -+{ -+#define CP1_SIZE (1 << 20) -+ int gpio_count; -+ dma_addr_t dma; -+ cp1_base = -+ (void*)CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE, &dma, GFP_ATOMIC)); -+ -+ gpio_count = of_gpio_count(pdev->dev.of_node); -+ while (gpio_count) { -+ enum of_gpio_flags flags; -+ int gpio = of_get_gpio_flags(pdev->dev.of_node, --gpio_count, &flags); -+ if (gpio_request(gpio, "vmmc-relay")) -+ continue; -+ dev_info(&pdev->dev, "requested GPIO %d\n", gpio); -+ gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); -+ } -+ -+ dev_info(&pdev->dev, "reserved %dMB at 0x%p", CP1_SIZE >> 20, cp1_base); -+ -+ return 0; -+} -+ -+static const struct of_device_id vmmc_match[] = { -+ { .compatible = "lantiq,vmmc" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, vmmc_match); -+ -+static struct platform_driver vmmc_driver = { -+ .probe = vmmc_probe, -+ .driver = { -+ .name = "lantiq,vmmc", -+ .owner = THIS_MODULE, -+ .of_match_table = vmmc_match, -+ }, -+}; -+ -+module_platform_driver(vmmc_driver); diff --git a/target/linux/lantiq/patches-3.7/0304-etop.patch b/target/linux/lantiq/patches-3.7/0304-etop.patch deleted file mode 100644 index 9d17649f4e..0000000000 --- a/target/linux/lantiq/patches-3.7/0304-etop.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/drivers/net/ethernet/lantiq_etop.c -+++ b/drivers/net/ethernet/lantiq_etop.c -@@ -343,16 +343,17 @@ static int - ltq_etop_hw_init(struct net_device *dev) - { - struct ltq_etop_priv *priv = netdev_priv(dev); -+ int mii_mode = priv->mii_mode; - - clk_enable(priv->clk_ppe); - - if (of_machine_is_compatible("lantiq,ar9")) { - ltq_etop_gbit_init(dev); - /* force the etops link to the gbit to MII */ -- priv->mii_mode = PHY_INTERFACE_MODE_MII; -+ mii_mode = PHY_INTERFACE_MODE_MII; - } - -- switch (priv->mii_mode) { -+ switch (mii_mode) { - case PHY_INTERFACE_MODE_RMII: - ltq_etop_w32_mask(ETOP_MII_MASK, - ETOP_MII_REVERSE, LTQ_ETOP_CFG); -@@ -377,7 +378,7 @@ ltq_etop_hw_init(struct net_device *dev) - break; - } - netdev_err(dev, "unknown mii mode %d\n", -- priv->mii_mode); -+ mii_mode); - return -ENOTSUPP; - } - diff --git a/target/linux/lantiq/patches-3.7/0305-no_xip_nor.patch b/target/linux/lantiq/patches-3.7/0305-no_xip_nor.patch deleted file mode 100644 index a154befded..0000000000 --- a/target/linux/lantiq/patches-3.7/0305-no_xip_nor.patch +++ /dev/null @@ -1,17 +0,0 @@ -Index: linux-3.7.10/drivers/mtd/maps/lantiq-flash.c -=================================================================== ---- linux-3.7.10.orig/drivers/mtd/maps/lantiq-flash.c 2013-02-27 18:22:04.000000000 +0100 -+++ linux-3.7.10/drivers/mtd/maps/lantiq-flash.c 2013-03-12 10:10:22.954382685 +0100 -@@ -134,7 +134,11 @@ - } - - ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL); -- ltq_mtd->map->phys = ltq_mtd->res->start; -+ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) -+ ltq_mtd->map->phys = NO_XIP; -+ else -+ ltq_mtd->map->phys = ltq_mtd->res->start; -+ ltq_mtd->res->start; - ltq_mtd->map->size = resource_size(ltq_mtd->res); - ltq_mtd->map->virt = devm_request_and_ioremap(&pdev->dev, ltq_mtd->res); - if (!ltq_mtd->map->virt) {