From: John Crispin Date: Fri, 10 Oct 2014 08:56:43 +0000 (+0000) Subject: ramips: add support for Nexx WT1520 X-Git-Tag: reboot~5682 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=af1207b58c61eed1eaa86f5e670347b84fd75a09;p=oweals%2Fopenwrt.git ramips: add support for Nexx WT1520 Signed-off-by: Roger Pueyo Centelles SVN-Revision: 42867 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index b07c96af31..26f384d318 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -210,6 +210,9 @@ case $board in set_usb_led "wr8305rt:usb" set_wifi_led "wr8305rt:wifi" ;; + wt1520) + set_wifi_led "rt2800pci-phy0::radio" + ;; y1 |\ y1s) ucidef_set_led_default "power" "power" "lenovo:blue:power" "1" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index c462fd8142..7ecec5fd27 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -110,7 +110,8 @@ ramips_setup_interfaces() dir-615-h1 | \ hlk-rm04 | \ mzk-w300nh2 | \ - mzk-750dhp) + mzk-750dhp | \ + wt1520) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 9752eb22ec..aed7d6ab2e 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -167,6 +167,9 @@ get_status_led() { wnce2001) status_led="netgear:green:power" ;; + nexx-wt1520) + status_led="nexx-wt1520:white:power" + ;; mzk-w300nh2) status_led="mzkw300nh2:green:power" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 68ff509a4e..08c5dff020 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -181,6 +181,9 @@ ramips_board_detect() { *"NexAira BC2") name="bc2" ;; + *"Nexx WT1520") + name="wt1520" + ;; *"NW718") name="nw718" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 4aec78099a..52f3f0a3ee 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -90,6 +90,7 @@ platform_check_image() { wnce2001 | \ wli-tx4-ag300n | \ whr-g300n |\ + wt1520 |\ ur-326n4g |\ ur-336un |\ wr512-3gn |\ diff --git a/target/linux/ramips/dts/WT1520.dts b/target/linux/ramips/dts/WT1520.dts new file mode 100644 index 0000000000..dc0ad32f41 --- /dev/null +++ b/target/linux/ramips/dts/WT1520.dts @@ -0,0 +1,83 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "NEXXWT1520", "ralink,rt5350-soc"; + model = "Nexx WT1520"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS1,57600"; + }; + + palmbus@10000000 { + uart@500 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q32"; + reg = <0 0>; + linux,modalias = "m25p80", "s25fl064k"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "jtag"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index c365d9dbb5..93554489a6 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -550,6 +550,13 @@ Image/Build/Profile/WNCE2001=$(call BuildFirmware/WNCE2001/$(1),$(1),wnce2001,WN Image/Build/Profile/WR512-3GN=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN) +define BuildFirmware/WT1520/initramfs + $(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4)) +endef +BuildFirmware/WT1520/squashfs=$(call BuildFirmware/Default4M/squashfs,$(1),$(2),$(3),$(4)) + +Image/Build/Profile/WT1520=$(call BuildFirmware/WT1520/$(1),$(1),wt1520,WT1520,WT1520) + Image/Build/Profile/UR-326N4G=$(call BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G) Image/Build/Profile/UR-336UN=$(call BuildFirmware/Default8M/$(1),$(1),ur-336un,UR-336UN) @@ -638,6 +645,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WNCE2001,$(1)) $(call Image/Build/Profile/WR512-3GN,$(1)) $(call Image/Build/Profile/WR6202,$(1)) + $(call Image/Build/Profile/WT1520,$(1)) $(call Image/Build/Profile/X5,$(1)) $(call Image/Build/Profile/X8,$(1)) $(call Image/Build/Profile/XDXRN502J,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/nexx.mk b/target/linux/ramips/rt305x/profiles/nexx.mk new file mode 100644 index 0000000000..eaef4c1abd --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/nexx.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2014 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/WT1520 + NAME:=Nexx WT1520 + PACKAGES:=kmod-usb2 +endef + +define Profile/WT1520/Description + Package set for WT1520 +endef + +$(eval $(call Profile,WT1520))