From: Michael Schwingen Date: Sun, 22 May 2011 22:00:05 +0000 (+0200) Subject: update/fix AcTux2 board X-Git-Tag: v2011.06~5^2~8 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=af0504858ca2651e32e15f2efe9ec9fcd0b7d57f;p=oweals%2Fu-boot.git update/fix AcTux2 board Signed-off-by: Michael Schwingen --- diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c index 0d67f80b97..9040a098de 100644 --- a/board/actux2/actux2.c +++ b/board/actux2/actux2.c @@ -43,50 +43,55 @@ DECLARE_GLOBAL_DATA_PTR; -int board_init (void) +int board_early_init_f(void) +{ + /* CS1: IPAC-X */ + writel(0x94d10013, IXP425_EXP_CS1); + /* CS5: Debug port */ + writel(0x9d520003, IXP425_EXP_CS5); + /* CS6: HW release register */ + writel(0x81860001, IXP425_EXP_CS6); + /* CS7: LEDs */ + writel(0x80900003, IXP425_EXP_CS7); + + return 0; +} + +int board_init(void) { gd->bd->bi_arch_number = MACH_TYPE_ACTUX2; /* adress of boot parameters */ gd->bd->bi_boot_params = 0x00000100; - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST); - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR); - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD); - GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST); + GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); + GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST); - GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR); - GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD); + GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR); + GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD); - /* Setup GPIO's for Interrupt inputs */ - GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT); - GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT); + /* Setup GPIOs for Interrupt inputs */ + GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT); + GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT); - /* Setup GPIO's for 33MHz clock output */ - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK); - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK); - *IXP425_GPIO_GPCLKR = 0x011001FF; + /* Setup GPIOs for 33MHz clock output */ + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); + writel(0x011001FF, IXP425_GPIO_GPCLKR); - /* CS1: IPAC-X */ - *IXP425_EXP_CS1 = 0x94d10013; - /* CS5: Debug port */ - *IXP425_EXP_CS5 = 0x9d520003; - /* CS6: HW release register */ - *IXP425_EXP_CS6 = 0x81860001; - /* CS7: LEDs */ - *IXP425_EXP_CS7 = 0x80900003; + udelay(533); + GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); + GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST); - udelay (533); - GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST); - - ACTUX2_LED1 (1); - ACTUX2_LED2 (0); - ACTUX2_LED3 (0); - ACTUX2_LED4 (0); + ACTUX2_LED1(1); + ACTUX2_LED2(0); + ACTUX2_LED3(0); + ACTUX2_LED4(0); return 0; } @@ -94,29 +99,27 @@ int board_init (void) /* * Check Board Identity */ -int checkboard (void) +int checkboard(void) { char buf[64]; int i = getenv_f("serial#", buf, sizeof(buf)); - puts ("Board: AcTux-2 rev."); - putc (ACTUX2_BOARDREL + 'A' - 1); + puts("Board: AcTux-2 rev."); + putc(ACTUX2_BOARDREL + 'A' - 1); if (i > 0) { puts(", serial# "); puts(buf); } - putc ('\n'); + putc('\n'); - return (0); + return 0; } -int dram_init (void) +int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return (0); + gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); + return 0; } /************************************************************************* @@ -125,13 +128,13 @@ int dram_init (void) * 1 = Rev. A * 2 = Rev. B *************************************************************************/ -u32 get_board_rev (void) +u32 get_board_rev(void) { return ACTUX2_BOARDREL; } -void reset_phy (void) +void reset_phy(void) { /* init IcPlus IP175C ethernet switch to native IP175C mode */ - miiphy_write ("NPE0", 29, 31, 0x175C); + miiphy_write("NPE0", 29, 31, 0x175C); } diff --git a/board/actux2/config.mk b/board/actux2/config.mk deleted file mode 100644 index 9cb838b738..0000000000 --- a/board/actux2/config.mk +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x00e00000 - -# include NPE ethernet driver -BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds index a405f557ed..3575ed99fc 100644 --- a/board/actux2/u-boot.lds +++ b/board/actux2/u-boot.lds @@ -30,34 +30,29 @@ SECTIONS . = ALIGN (4); .text : { - arch/arm/cpu/ixp/start.o(.text) - lib/string.o(.text) - lib/vsprintf.o(.text) - arch/arm/lib/board.o(.text) - common/dlmalloc.o(.text) - arch/arm/cpu/ixp/cpu.o(.text) + arch/arm/cpu/ixp/start.o(.text*) + net/libnet.o(.text*) + board/actux2/libactux2.o(.text*) + arch/arm/cpu/ixp/libixp.o(.text*) + drivers/serial/libserial.o(.text*) . = env_offset; - common/env_embedded.o (.ppcenv) - - * (.text) + common/env_embedded.o(.ppcenv) + *(.text*) } . = ALIGN (4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - . = ALIGN (4); .data : { - *(.data) + *(.data*) } - . = ALIGN (4); .got : { *(.got) } - . =.; __u_boot_cmd_start =.; .u_boot_cmd : { @@ -66,10 +61,27 @@ SECTIONS __u_boot_cmd_end =.; . = ALIGN (4); - __bss_start =.; - .bss (NOLOAD): { - *(.bss) - . = ALIGN(4); + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + .bss __rel_dyn_start (OVERLAY) : { + __bss_start = .; + *(.bss*) + . = ALIGN(4); + _end = .; } __bss_end__ =.; + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } } diff --git a/include/configs/actux2.h b/include/configs/actux2.h index 8ab3b19933..eca814b3ee 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -37,12 +37,12 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 5 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_BOARD_EARLY_INIT_F 1 +#define CONFIG_SYS_LDSCRIPT "board/actux2/u-boot.lds" /*************************************************************** * U-boot generic defines start here. ***************************************************************/ -#undef CONFIG_USE_IRQ - /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) @@ -84,8 +84,9 @@ #define CONFIG_SYS_MEMTEST_START 0x00400000 #define CONFIG_SYS_MEMTEST_END 0x00800000 -/* spec says 66.666 MHz, but it appears to be 33 */ -#define CONFIG_SYS_HZ 3333333 +/* timer clock - 2* OSC_IN system clock */ +#define CONFIG_IXP425_TIMER_CLK 66666666 +#define CONFIG_SYS_HZ 1000 /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 @@ -100,10 +101,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113042 @@ -111,7 +108,7 @@ /* SDRAM settings */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x00000000 -#define CONFIG_SYS_DRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* 16MB SDRAM */ #define CONFIG_SYS_SDR_CONFIG 0x3A @@ -121,6 +118,7 @@ #define CONFIG_SYS_DRAM_SIZE 0x01000000 /* FLASH organization */ +#define CONFIG_SYS_TEXT_BASE 0x50000000 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of sectors on one chip */ #define CONFIG_SYS_MAX_FLASH_SECT 140 @@ -130,6 +128,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 #define CONFIG_SYS_MONITOR_LEN (256 << 10) +#define CONFIG_BOARD_SIZE_LIMIT 262144 /* Use common CFI driver */ #define CONFIG_SYS_FLASH_CFI @@ -149,6 +148,11 @@ #define CONFIG_PHY_ADDR 0x00 /* MII PHY management */ #define CONFIG_MII 1 +/* fixed-speed switch without standard PHY registers on MII */ +#define CONFIG_MII_NPE0_FIXEDLINK 1 +#define CONFIG_MII_NPE0_SPEED 100 +#define CONFIG_MII_NPE0_FULLDUPLEX 1 + /* Number of ethernet rx buffers & descriptors */ #define CONFIG_SYS_RX_ETH_BUFFER 16 #define CONFIG_RESET_PHY_R 1 @@ -183,13 +187,15 @@ "npe_ucode=50040000\0" \ "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \ "kerneladdr=50050000\0" \ + "kernelfile=actux2/uImage\0" \ + "rootfile=actux2/rootfs\0" \ "rootaddr=50170000\0" \ "loadaddr=10000\0" \ "updateboot_ser=mw.b 10000 ff 40000;" \ " loady ${loadaddr};" \ " run eraseboot writeboot\0" \ "updateboot_net=mw.b 10000 ff 40000;" \ - " tftp ${loadaddr} u-boot.bin;" \ + " tftp ${loadaddr} actux2/u-boot.bin;" \ " run eraseboot writeboot\0" \ "eraseboot=protect off 50000000 50003fff;" \ " protect off 50006000 5003ffff;" \ @@ -197,8 +203,9 @@ " erase 50006000 5003ffff\0" \ "writeboot=cp.b 10000 50000000 4000;" \ " cp.b 16000 50006000 3a000\0" \ - "eraseenv=protect off 50004000 50005fff;" \ - " erase 50004000 50005fff\0" \ + "updateucode=loady;" \ + " era ${npe_ucode} +${filesize};" \ + " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \ "updateroot=tftp ${loadaddr} ${rootfile};" \ " era ${rootaddr} +${filesize};" \ " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ @@ -217,4 +224,8 @@ " tftpboot ${loadaddr} ${kernelfile};" \ " bootm\0" +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + #endif /* __CONFIG_H */