From: Shaohui Xie Date: Wed, 13 Aug 2014 10:38:09 +0000 (+0800) Subject: driver/net/fm/memac_phy: set NEG bit for external MDIOs X-Git-Tag: v2015.01-rc2~77^2~10 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=ae6b45830637f7540d0c06280c886bfcb295d27b;p=oweals%2Fu-boot.git driver/net/fm/memac_phy: set NEG bit for external MDIOs NEG bit default is '1' for external MDIOs as per FMAN-v3 RM, but on some platforms, e.g. T2080QDS, this bit is '0', which leads to MDIO failure on XAUI PHY, so set this bit definitely to align with the RM. Signed-off-by: Shaohui Xie Acked-by: Joe Hershberger Reviewed-by: York Sun --- diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h index f84c1a915b..bed2a40bb2 100644 --- a/arch/powerpc/include/asm/fsl_memac.h +++ b/arch/powerpc/include/asm/fsl_memac.h @@ -244,6 +244,7 @@ struct memac_mdio_controller { #define MDIO_STAT_PRE (1 << 5) #define MDIO_STAT_ENC (1 << 6) #define MDIO_STAT_HOLD_15_CLK (7 << 2) +#define MDIO_STAT_NEG (1 << 23) #define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) #define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c index e432ae7758..a155d8930b 100644 --- a/drivers/net/fm/memac_phy.c +++ b/drivers/net/fm/memac_phy.c @@ -139,9 +139,12 @@ int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info) * is zero, so MDIO clock is disabled. * So, for proper functioning of MDIO, MDIO_CLK_DIV bits needs to * be properly initialized. + * NEG bit default should be '1' as per FMAN-v3 RM, but on platform + * like T2080QDS, this bit default is '0', which leads to MDIO failure + * on XAUI PHY, so set this bit definitely. */ setbits_be32(&((struct memac_mdio_controller *)info->regs)->mdio_stat, - MDIO_STAT_CLKDIV(258)); + MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG); return mdio_register(bus); }