From: Jeremiah McConnell Date: Sat, 16 Jun 2018 04:26:44 +0000 (-0600) Subject: mvebu: backport ahci_mvebu errata patchset X-Git-Tag: v18.06.0-rc1~48 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=ae0712ae8fb471a4ce0635abb40851d14b315587;p=oweals%2Fopenwrt.git mvebu: backport ahci_mvebu errata patchset Marvell ahci hardware requires a workaround to prevent eSATA failures on hotplug/reset when used with multi-bay external enclosures. Errata Ref#226 - SATA Disk HOT swap issue when connected through Port Multiplier in FIS-based Switching mode. These patches backport the workaround from 4.17. Signed-off-by: Jeremiah McConnell (cherry picked from commit e820455198aa50cc32f9a108a4696f0cc23023c3) --- diff --git a/target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch b/target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch new file mode 100644 index 0000000000..2d56749607 --- /dev/null +++ b/target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch @@ -0,0 +1,224 @@ +From fa89f53bd7288d6aa7a982841119e7123faf5a53 Mon Sep 17 00:00:00 2001 +From: Evan Wang +Date: Fri, 13 Apr 2018 12:32:30 +0800 +Subject: [PATCH] libahci: Allow drivers to override stop_engine + +Marvell armada37xx, armada7k and armada8k share the same +AHCI sata controller IP, and currently there is an issue +(Errata Ref#226)that the SATA can not be detected via SATA +Port-MultiPlayer(PMP). After debugging, the reason is +found that the value of Port-x FIS-based Switching Control +(PxFBS@0x40) became wrong. +According to design, the bits[11:8, 0] of register PxFBS +are cleared when Port Command and Status (0x18) bit[0] +changes its value from 1 to 0, i.e. falling edge of Port +Command and Status bit[0] sends PULSE that resets PxFBS +bits[11:8; 0]. +So it needs save the port PxFBS register before PxCMD +ST write and restore the port PxFBS register afterwards +in ahci_stop_engine(). + +This commit allows drivers to override ahci_stop_engine +behavior for use by the Marvell AHCI driver(and potentially +other drivers in the future). + +Signed-off-by: Evan Wang +Cc: Ofer Heifetz +Cc: Tejun Heo +Cc: Thomas Petazzoni +Signed-off-by: Tejun Heo +--- + drivers/ata/ahci.c | 6 +++--- + drivers/ata/ahci.h | 7 +++++++ + drivers/ata/ahci_qoriq.c | 2 +- + drivers/ata/ahci_xgene.c | 4 ++-- + drivers/ata/libahci.c | 20 ++++++++++++-------- + drivers/ata/sata_highbank.c | 2 +- + 6 files changed, 26 insertions(+), 15 deletions(-) + +diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c +index 1ff17799769d0..6389c88b3500a 100644 +--- a/drivers/ata/ahci.c ++++ b/drivers/ata/ahci.c +@@ -698,7 +698,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, + + DPRINTK("ENTER\n"); + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), + deadline, &online, NULL); +@@ -724,7 +724,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, + bool online; + int rc; + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); +@@ -788,7 +788,7 @@ static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + + DPRINTK("ENTER\n"); + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + for (i = 0; i < 2; i++) { + u16 val; +diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h +index a9d996e17d75e..824bd399f02ea 100644 +--- a/drivers/ata/ahci.h ++++ b/drivers/ata/ahci.h +@@ -365,6 +365,13 @@ struct ahci_host_priv { + * be overridden anytime before the host is activated. + */ + void (*start_engine)(struct ata_port *ap); ++ /* ++ * Optional ahci_stop_engine override, if not set this gets set to the ++ * default ahci_stop_engine during ahci_save_initial_config, this can ++ * be overridden anytime before the host is activated. ++ */ ++ int (*stop_engine)(struct ata_port *ap); ++ + irqreturn_t (*irq_handler)(int irq, void *dev_instance); + + /* only required for per-port MSI(-X) support */ +diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c +index 2685f28160f70..cfdef4d44ae92 100644 +--- a/drivers/ata/ahci_qoriq.c ++++ b/drivers/ata/ahci_qoriq.c +@@ -96,7 +96,7 @@ static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class, + + DPRINTK("ENTER\n"); + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + /* + * There is a errata on ls1021a Rev1.0 and Rev2.0 which is: +diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c +index c2b5941d9184d..ad58da7c9affd 100644 +--- a/drivers/ata/ahci_xgene.c ++++ b/drivers/ata/ahci_xgene.c +@@ -165,7 +165,7 @@ static int xgene_ahci_restart_engine(struct ata_port *ap) + PORT_CMD_ISSUE, 0x0, 1, 100)) + return -EBUSY; + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + ahci_start_fis_rx(ap); + + /* +@@ -421,7 +421,7 @@ static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, + portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); + portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + rc = xgene_ahci_do_hardreset(link, deadline, &online); + +diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c +index 7adcf3caabd00..e5d90977caec2 100644 +--- a/drivers/ata/libahci.c ++++ b/drivers/ata/libahci.c +@@ -560,6 +560,9 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) + if (!hpriv->start_engine) + hpriv->start_engine = ahci_start_engine; + ++ if (!hpriv->stop_engine) ++ hpriv->stop_engine = ahci_stop_engine; ++ + if (!hpriv->irq_handler) + hpriv->irq_handler = ahci_single_level_irq_intr; + } +@@ -897,9 +900,10 @@ static void ahci_start_port(struct ata_port *ap) + static int ahci_deinit_port(struct ata_port *ap, const char **emsg) + { + int rc; ++ struct ahci_host_priv *hpriv = ap->host->private_data; + + /* disable DMA */ +- rc = ahci_stop_engine(ap); ++ rc = hpriv->stop_engine(ap); + if (rc) { + *emsg = "failed to stop engine"; + return rc; +@@ -1310,7 +1314,7 @@ int ahci_kick_engine(struct ata_port *ap) + int busy, rc; + + /* stop engine */ +- rc = ahci_stop_engine(ap); ++ rc = hpriv->stop_engine(ap); + if (rc) + goto out_restart; + +@@ -1549,7 +1553,7 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class, + + DPRINTK("ENTER\n"); + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); +@@ -2075,14 +2079,14 @@ void ahci_error_handler(struct ata_port *ap) + + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { + /* restart engine */ +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + hpriv->start_engine(ap); + } + + sata_pmp_error_handler(ap); + + if (!ata_dev_enabled(ap->link.device)) +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + } + EXPORT_SYMBOL_GPL(ahci_error_handler); + +@@ -2129,7 +2133,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) + return; + + /* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */ +- rc = ahci_stop_engine(ap); ++ rc = hpriv->stop_engine(ap); + if (rc) + return; + +@@ -2189,7 +2193,7 @@ static void ahci_enable_fbs(struct ata_port *ap) + return; + } + +- rc = ahci_stop_engine(ap); ++ rc = hpriv->stop_engine(ap); + if (rc) + return; + +@@ -2222,7 +2226,7 @@ static void ahci_disable_fbs(struct ata_port *ap) + return; + } + +- rc = ahci_stop_engine(ap); ++ rc = hpriv->stop_engine(ap); + if (rc) + return; + +diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c +index aafb8cc035232..e67815b896fcc 100644 +--- a/drivers/ata/sata_highbank.c ++++ b/drivers/ata/sata_highbank.c +@@ -410,7 +410,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, + int rc; + int retry = 100; + +- ahci_stop_engine(ap); ++ hpriv->stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + diff --git a/target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch b/target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch new file mode 100644 index 0000000000..e71cc0c49f --- /dev/null +++ b/target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch @@ -0,0 +1,110 @@ +From daa2e3bdbb0b3e691cf20a042350817310cb8cb5 Mon Sep 17 00:00:00 2001 +From: Evan Wang +Date: Fri, 13 Apr 2018 12:32:31 +0800 +Subject: [PATCH] ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI + +There is an issue(Errata Ref#226) that the SATA can not be +detected via SATA Port-MultiPlayer(PMP) with following +error log: + ata1.15: PMP product ID mismatch + ata1.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) + ata1.15: Port Multiplier vendor mismatch '0x1b4b'!='0x0' + ata1.15: PMP revalidation failed (errno=-19) + +After debugging, the reason is found that the value Port-x +FIS-based Switching Control(PxFBS@0x40) become wrong. +According to design, the bits[11:8, 0] of register PxFBS +are cleared when Port Command and Status (0x18) bit[0] +changes its value from 1 to 0, i.e. falling edge of Port +Command and Status bit[0] sends PULSE that resets PxFBS +bits[11:8; 0]. +So it needs a mvebu SATA WA to save the port PxFBS register +before PxCMD ST write and restore it afterwards. + +This patch implements the WA in a separate function of +ahci_mvebu_stop_engine to override ahci_stop_gngine. + +Signed-off-by: Evan Wang +Cc: Ofer Heifetz +Cc: Tejun Heo +Cc: Thomas Petazzoni +Signed-off-by: Tejun Heo +--- + drivers/ata/ahci_mvebu.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 56 insertions(+) + +diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c +index de7128d81e9cc..0045dacd814b4 100644 +--- a/drivers/ata/ahci_mvebu.c ++++ b/drivers/ata/ahci_mvebu.c +@@ -62,6 +62,60 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv) + writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA); + } + ++/** ++ * ahci_mvebu_stop_engine ++ * ++ * @ap: Target ata port ++ * ++ * Errata Ref#226 - SATA Disk HOT swap issue when connected through ++ * Port Multiplier in FIS-based Switching mode. ++ * ++ * To avoid the issue, according to design, the bits[11:8, 0] of ++ * register PxFBS are cleared when Port Command and Status (0x18) bit[0] ++ * changes its value from 1 to 0, i.e. falling edge of Port ++ * Command and Status bit[0] sends PULSE that resets PxFBS ++ * bits[11:8; 0]. ++ * ++ * This function is used to override function of "ahci_stop_engine" ++ * from libahci.c by adding the mvebu work around(WA) to save PxFBS ++ * value before the PxCMD ST write of 0, then restore PxFBS value. ++ * ++ * Return: 0 on success; Error code otherwise. ++ */ ++int ahci_mvebu_stop_engine(struct ata_port *ap) ++{ ++ void __iomem *port_mmio = ahci_port_base(ap); ++ u32 tmp, port_fbs; ++ ++ tmp = readl(port_mmio + PORT_CMD); ++ ++ /* check if the HBA is idle */ ++ if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) ++ return 0; ++ ++ /* save the port PxFBS register for later restore */ ++ port_fbs = readl(port_mmio + PORT_FBS); ++ ++ /* setting HBA to idle */ ++ tmp &= ~PORT_CMD_START; ++ writel(tmp, port_mmio + PORT_CMD); ++ ++ /* ++ * bit #15 PxCMD signal doesn't clear PxFBS, ++ * restore the PxFBS register right after clearing the PxCMD ST, ++ * no need to wait for the PxCMD bit #15. ++ */ ++ writel(port_fbs, port_mmio + PORT_FBS); ++ ++ /* wait for engine to stop. This could be as long as 500 msec */ ++ tmp = ata_wait_register(ap, port_mmio + PORT_CMD, ++ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); ++ if (tmp & PORT_CMD_LIST_ON) ++ return -EIO; ++ ++ return 0; ++} ++ + #ifdef CONFIG_PM_SLEEP + static int ahci_mvebu_suspend(struct platform_device *pdev, pm_message_t state) + { +@@ -112,6 +166,8 @@ static int ahci_mvebu_probe(struct platform_device *pdev) + if (rc) + return rc; + ++ hpriv->stop_engine = ahci_mvebu_stop_engine; ++ + if (of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-380-ahci")) { + dram = mv_mbus_dram_info(); +