From: Sam Protsenko Date: Fri, 12 Jul 2019 17:38:12 +0000 (+0300) Subject: env: ti: boot: Use ttyS2 instead of ttyO2 X-Git-Tag: v2019.10-rc1~8^2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=adc097e13320f1016526f0fab75321ad7bab9521;p=oweals%2Fu-boot.git env: ti: boot: Use ttyS2 instead of ttyO2 ttyO2 console enables legacy CONFIG_SERIAL_OMAP driver in kernel. Nowadays it's preferred to use the generic CONFIG_SERIAL_8250_OMAP driver, which being enabled via ttyS2 console. Both drivers are enabled in multi_v7_defconfig and in omap2plus_defconfig, for compatibility reasons. Let's switch to ttyS2 console, to be sure that standard 8250 serial driver is used. Similar behavior can be also achieved by enabling CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP option in kernel, but it's better not to rely on that, as it can be disabled or removed after transitional period. Right now on DRA7/AM57x platforms the 8250-omap driver is being probed first, and omap-serial driver is only probed if the first one failed. It can be seen from uart3 definition in arch/arm/boot/dts/dra7-l4.dtsi: compatible = "ti,dra742-uart", "ti,omap4-uart"; So the kernel already uses 8250 driver. This change basically allows kernel developers to throw away the omap-serial driver and associated compatibility options. Similar discussions [1,2] have started several years ago, so it should be safe to do that now. [1] https://patchwork.kernel.org/patch/6198471/ [2] http://processors.wiki.ti.com/index.php/Sitara_Linux_UART_-_Switching_to_8250_Driver Signed-off-by: Sam Protsenko Reviewed-by: Andrew F. Davis [trini: Update omap5_uevm] Signed-off-by: Tom Rini --- diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 45fd21878c..e181b30564 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -24,7 +24,7 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONSOLEDEV "ttyO2" +#define CONSOLEDEV "ttyS2" #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 9c8141de2e..7ec6e691c7 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -26,9 +26,9 @@ #endif #if (CONFIG_CONS_INDEX == 1) -#define CONSOLEDEV "ttyO0" +#define CONSOLEDEV "ttyS0" #elif (CONFIG_CONS_INDEX == 3) -#define CONSOLEDEV "ttyO2" +#define CONSOLEDEV "ttyS2" #endif #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 27e47327d3..3710a71ae9 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -53,7 +53,7 @@ /* USB Networking options */ -#define CONSOLEDEV "ttyO2" +#define CONSOLEDEV "ttyS2" #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h index 54e9b2de4d..e55a4aec57 100644 --- a/include/environment/ti/boot.h +++ b/include/environment/ti/boot.h @@ -10,7 +10,7 @@ #define __TI_BOOT_H #ifndef CONSOLEDEV -#define CONSOLEDEV "ttyO2" +#define CONSOLEDEV "ttyS2" #endif #define VBMETA_PART_SIZE (64 * 1024)