From: stroese Date: Fri, 14 Feb 2003 11:21:23 +0000 (+0000) Subject: Add "pcidelay" environment variable (in ms, enabled via CONFIG_PCI_BOOTDELAY). X-Git-Tag: LABEL_2006_03_12_0025~946 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=ad10dd9aaf573fefe1cbd9d446a24f07f8b87428;p=oweals%2Fu-boot.git Add "pcidelay" environment variable (in ms, enabled via CONFIG_PCI_BOOTDELAY). --- diff --git a/CHANGELOG b/CHANGELOG index a0bf5e2473..d103759a97 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,12 @@ Changes since U-Boot 0.2.1: ====================================================================== +* Patch by Stefan Roese, 13 Feb 2003: + Add "pcidelay" environment variable (in ms, enabled via + CONFIG_PCI_BOOTDELAY). + PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after + RST# to respond to configuration cycles (33MHz -> 1s). + * Patch by Stefan Roese, 10 Feb 2003: Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c) diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c index 9d5c24e2fc..1d6ca813a2 100644 --- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c +++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c @@ -107,7 +107,7 @@ int misc_init_r (void) } -void pci_init (void) +void pci_init_board (void) { #ifndef CONFIG_RAMBOOT articiaS_pci_init (); diff --git a/board/bmw/bmw.c b/board/bmw/bmw.c index 25a710f436..26856621e7 100644 --- a/board/bmw/bmw.c +++ b/board/bmw/bmw.c @@ -102,7 +102,7 @@ int misc_init_f (void) */ struct pci_controller hose; -void pci_init (void) +void pci_init_board (void) { pci_mpc824x_init(&hose); /* pci_dev_init(0); */ diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c index 20aaea2f20..a7c583cc38 100644 --- a/board/cu824/cu824.c +++ b/board/cu824/cu824.c @@ -113,7 +113,7 @@ struct pci_controller hose = { #endif }; -void pci_init(void) +void pci_init_board(void) { pci_mpc824x_init(&hose); } diff --git a/board/eltec/bab7xx/pci.c b/board/eltec/bab7xx/pci.c index 2fd8e13ca3..a5fcfef9ce 100644 --- a/board/eltec/bab7xx/pci.c +++ b/board/eltec/bab7xx/pci.c @@ -33,7 +33,7 @@ struct pci_controller local_hose; -void pci_init(void) +void pci_init_board(void) { struct pci_controller* hose = (struct pci_controller *)&local_hose; u32 reg32; diff --git a/board/eltec/elppc/pci.c b/board/eltec/elppc/pci.c index 07158e6786..2bbb5f2ea4 100644 --- a/board/eltec/elppc/pci.c +++ b/board/eltec/elppc/pci.c @@ -33,7 +33,7 @@ struct pci_controller local_hose; -void pci_init(void) +void pci_init_board(void) { struct pci_controller* hose = (struct pci_controller *)&local_hose; u16 reg16; diff --git a/board/esd/common/pci.c b/board/esd/common/pci.c index f8f180c6c4..f711205efe 100644 --- a/board/esd/common/pci.c +++ b/board/esd/common/pci.c @@ -166,7 +166,7 @@ static struct pci_controller pci9054_hose = { config_table: pci9054_config_table, }; -void pci_init(void) +void pci_init_board(void) { struct pci_controller *hose = &pci9054_hose; diff --git a/board/evb64260/pci.c b/board/evb64260/pci.c index 8e9178db4f..585906d31d 100644 --- a/board/evb64260/pci.c +++ b/board/evb64260/pci.c @@ -597,7 +597,7 @@ struct pci_controller pci1_hose = { }; void -pci_init(void) +pci_init_board(void) { unsigned int command; diff --git a/board/mousse/pci.c b/board/mousse/pci.c index 89ca235d10..4f393984ca 100644 --- a/board/mousse/pci.c +++ b/board/mousse/pci.c @@ -277,7 +277,7 @@ struct pci_controller hose = { fixup_irq: pci_mousse_fixup_irq, }; -void pci_init(void) +void pci_init_board(void) { pci_mpc824x_init(&hose); } diff --git a/board/mpl/common/pci.c b/board/mpl/common/pci.c index d1965f95f6..a26f542eb3 100644 --- a/board/mpl/common/pci.c +++ b/board/mpl/common/pci.c @@ -90,7 +90,7 @@ static struct pci_controller hose = { fixup_irq: pci_pip405_fixup_irq, }; -void pci_init(void) +void pci_init_board(void) { /*we want the ptrs to RAM not flash (ie don't use init list)*/ hose.fixup_irq = pci_pip405_fixup_irq; diff --git a/board/musenki/musenki.c b/board/musenki/musenki.c index 3b02f37c3c..d805f09e3f 100644 --- a/board/musenki/musenki.c +++ b/board/musenki/musenki.c @@ -124,7 +124,7 @@ struct pci_controller hose = { #endif }; -void pci_init(void) +void pci_init_board(void) { pci_mpc824x_init(&hose); } diff --git a/board/oxc/oxc.c b/board/oxc/oxc.c index 8aced84e54..5f5e59a3ad 100644 --- a/board/oxc/oxc.c +++ b/board/oxc/oxc.c @@ -108,7 +108,7 @@ static struct pci_controller hose = { #endif }; -void pci_init (void) +void pci_init_board (void) { pci_mpc824x_init(&hose); } diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 80ca40250c..bab3c205a3 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -135,7 +135,7 @@ int misc_init_r (void) return (0); } -void pci_init (void) +void pci_init_board (void) { cpc710_pci_init (); diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c index 4d87527152..9b1fc00e30 100644 --- a/board/pn62/pn62.c +++ b/board/pn62/pn62.c @@ -137,7 +137,7 @@ long int initdram (int board_type) struct pci_controller hose = { }; -void pci_init (void) +void pci_init_board (void) { show_startup_phase (4); pci_mpc824x_init (&hose); diff --git a/board/sandpoint/sandpoint.c b/board/sandpoint/sandpoint.c index 8d385f7111..fe1c0a0d5e 100644 --- a/board/sandpoint/sandpoint.c +++ b/board/sandpoint/sandpoint.c @@ -121,7 +121,7 @@ struct pci_controller hose = { #endif }; -void pci_init(void) +void pci_init_board(void) { pci_mpc824x_init(&hose); } diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c index 41f5e3ad10..ba6255f4eb 100644 --- a/board/sc520_cdp/sc520_cdp.c +++ b/board/sc520_cdp/sc520_cdp.c @@ -31,35 +31,35 @@ static void irq_init(void) { - + /* disable global interrupt mode */ - write_mmcr_byte(SC520_PICICR, 0x40); - + write_mmcr_byte(SC520_PICICR, 0x40); + /* set irq0-7 to edge */ write_mmcr_byte(SC520_MPICMODE, 0x00); - + /* set irq9-12 to level, all the other (8, 13-15) are edge */ write_mmcr_byte(SC520_SL1PICMODE, 0x1e); - + /* set irq16-24 (unused slave pic2) to level */ write_mmcr_byte(SC520_SL2PICMODE, 0xff); - - /* active low polarity on PIC interrupt pins, + + /* active low polarity on PIC interrupt pins, active high polarity on all other irq pins */ write_mmcr_word(SC520_INTPINPOL, 0); /* set irq number mapping */ - write_mmcr_byte(SC520_GPTMR0MAP,0); /* disable GP timer 0 INT */ + write_mmcr_byte(SC520_GPTMR0MAP,0); /* disable GP timer 0 INT */ write_mmcr_byte(SC520_GPTMR1MAP,0); /* disable GP timer 1 INT */ write_mmcr_byte(SC520_GPTMR2MAP,0); /* disable GP timer 2 INT */ - write_mmcr_byte(SC520_PIT0MAP,0x1); /* Set PIT timer 0 INT to IRQ0 */ + write_mmcr_byte(SC520_PIT0MAP,0x1); /* Set PIT timer 0 INT to IRQ0 */ write_mmcr_byte(SC520_PIT1MAP,0); /* diable PIT timer 1 INT */ write_mmcr_byte(SC520_PIT2MAP,0); /* diable PIT timer 2 INT */ write_mmcr_byte(SC520_PCIINTAMAP,0x4); /* Set PCI INT A to IRQ9 */ write_mmcr_byte(SC520_PCIINTBMAP,0x5); /* Set PCI INT B to IRQ10 */ write_mmcr_byte(SC520_PCIINTCMAP,0x6); /* Set PCI INT C to IRQ11 */ write_mmcr_byte(SC520_PCIINTDMAP,0x7); /* Set PCI INT D to IRQ12 */ - write_mmcr_byte(SC520_DMABCINTMAP,0); /* disable DMA INT */ + write_mmcr_byte(SC520_DMABCINTMAP,0); /* disable DMA INT */ write_mmcr_byte(SC520_SSIMAP,0); /* disable Synchronius serial INT */ write_mmcr_byte(SC520_WDTMAP,0); /* disable Watchdor INT */ write_mmcr_byte(SC520_RTCMAP,0x3); /* Set RTC int to 8 */ @@ -69,28 +69,28 @@ static void irq_init(void) write_mmcr_byte(SC520_GP0IMAP,6); /* Set GPIRQ0 (ISA IRQ2) to IRQ9 */ write_mmcr_byte(SC520_GP1IMAP,2); /* Set GPIRQ1 (SIO IRQ1) to IRQ1 */ write_mmcr_byte(SC520_GP2IMAP,7); /* Set GPIRQ2 (ISA IRQ12) to IRQ12 */ - + if (CFG_USE_SIO_UART) { write_mmcr_byte(SC520_UART1MAP,0); /* disable internal UART1 INT */ write_mmcr_byte(SC520_UART2MAP,0); /* disable internal UART2 INT */ - write_mmcr_byte(SC520_GP3IMAP,11); /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */ + write_mmcr_byte(SC520_GP3IMAP,11); /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */ write_mmcr_byte(SC520_GP4IMAP,12); /* Set GPIRQ4 (ISA IRQ4) to IRQ4 */ } else { write_mmcr_byte(SC520_UART1MAP,12); /* Set internal UART2 INT to IRQ4 */ write_mmcr_byte(SC520_UART2MAP,11); /* Set internal UART2 INT to IRQ3 */ - write_mmcr_byte(SC520_GP3IMAP,0); /* disable GPIRQ3 (ISA IRQ3) */ + write_mmcr_byte(SC520_GP3IMAP,0); /* disable GPIRQ3 (ISA IRQ3) */ write_mmcr_byte(SC520_GP4IMAP,0); /* disable GPIRQ4 (ISA IRQ4) */ } - + write_mmcr_byte(SC520_GP5IMAP,13); /* Set GPIRQ5 (ISA IRQ5) to IRQ5 */ write_mmcr_byte(SC520_GP6IMAP,21); /* Set GPIRQ6 (ISA IRQ6) to IRQ6 */ write_mmcr_byte(SC520_GP7IMAP,22); /* Set GPIRQ7 (ISA IRQ7) to IRQ7 */ write_mmcr_byte(SC520_GP8IMAP,3); /* Set GPIRQ8 (SIO IRQ8) to IRQ8 */ write_mmcr_byte(SC520_GP9IMAP,4); /* Set GPIRQ9 (ISA IRQ9) to IRQ9 */ - write_mmcr_byte(SC520_GP10IMAP,9); /* Set GPIRQ10 (ISA IRQ10) to IRQ10 */ + write_mmcr_byte(SC520_GP10IMAP,9); /* Set GPIRQ10 (ISA IRQ10) to IRQ10 */ write_mmcr_word(SC520_PCIHOSTMAP,0x11f); /* Map PCI hostbridge INT to NMI */ write_mmcr_word(SC520_ECCMAP,0x100); /* Map SDRAM ECC failure INT to NMI */ - + } /* PCI stuff */ @@ -98,11 +98,11 @@ static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { char pin; int irq; - - + + pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin); irq = pin-1; - + switch (PCI_DEV(dev)) { case 20: break; @@ -115,25 +115,25 @@ static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev) case 17: irq+=3; break; - default: + default: return; } - + irq&=3; /* wrap around */ irq+=9; /* lowest IRQ is 9 */ - + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, irq); -#if 0 - printf("fixup_irq: device %d pin %c irq %d\n", +#if 0 + printf("fixup_irq: device %d pin %c irq %d\n", PCI_DEV(dev), 'A' + pin -1, irq); #endif } - + static struct pci_controller sc520_cdp_hose = { fixup_irq: pci_sc520_cdp_fixup_irq, }; -void pci_init(void) +void pci_init_board(void) { pci_sc520_init(&sc520_cdp_hose); } @@ -147,7 +147,7 @@ static void silence_uart(int port) void setup_ali_sio(int uart_primary) { ali512x_init(); - + ali512x_set_fdc(ALI_ENABLED, 0x3f2, 6, 0); ali512x_set_pp(ALI_ENABLED, 0x278, 7, 3); ali512x_set_uart(ALI_ENABLED, ALI_UART1, uart_primary?0x3f8:0x3e8, 4); @@ -155,21 +155,21 @@ void setup_ali_sio(int uart_primary) ali512x_set_rtc(ALI_DISABLED, 0, 0); ali512x_set_kbc(ALI_ENABLED, 1, 12); ali512x_set_cio(ALI_ENABLED); - + /* IrDa pins */ ali512x_cio_function(12, 1, 0, 0); ali512x_cio_function(13, 1, 0, 0); - + /* SSI chip select pins */ ali512x_cio_function(14, 0, 0, 0); /* SSI_CS */ - ali512x_cio_function(15, 0, 0, 0); /* SSI_MV */ + ali512x_cio_function(15, 0, 0, 0); /* SSI_MV */ ali512x_cio_function(16, 0, 1, 0); /* SSI_SPI# (inverted) */ /* Board REV pins */ ali512x_cio_function(20, 0, 0, 1); ali512x_cio_function(21, 0, 0, 1); ali512x_cio_function(22, 0, 0, 1); - ali512x_cio_function(23, 0, 0, 1); + ali512x_cio_function(23, 0, 0, 1); } @@ -178,13 +178,13 @@ static void bus_init(void) { /* set up the GP IO pins */ - write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */ + write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */ write_mmcr_word(SC520_PIOPFS15_0, 0xffff); /* set the GPIO pin function 15-0 reg */ - write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */ + write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */ write_mmcr_byte(SC520_CLKSEL, 0x70); - - write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ + + write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */ write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */ write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */ @@ -192,40 +192,40 @@ static void bus_init(void) write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */ write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */ - write_mmcr_word(SC520_BOOTCSCTL, 0x1823); /* set up timing of BOOTCS */ + write_mmcr_word(SC520_BOOTCSCTL, 0x1823); /* set up timing of BOOTCS */ write_mmcr_word(SC520_ROMCS1CTL, 0x1823); /* set up timing of ROMCS1 */ - write_mmcr_word(SC520_ROMCS2CTL, 0x1823); /* set up timing of ROMCS2 */ - + write_mmcr_word(SC520_ROMCS2CTL, 0x1823); /* set up timing of ROMCS2 */ + /* adjust the memory map: * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM * and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio - * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ - - + * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ + + /* SRAM = GPCS3 128k @ d0000-effff*/ - write_mmcr_long(SC520_PAR2, 0x4e00400d); - + write_mmcr_long(SC520_PAR2, 0x4e00400d); + /* IDE0 = GPCS6 1f0-1f7 */ - write_mmcr_long(SC520_PAR3, 0x380801f0); + write_mmcr_long(SC520_PAR3, 0x380801f0); /* IDE1 = GPCS7 3f6 */ - write_mmcr_long(SC520_PAR4, 0x3c0003f6); + write_mmcr_long(SC520_PAR4, 0x3c0003f6); /* bootcs */ - write_mmcr_long(SC520_PAR12, 0x8bffe800); + write_mmcr_long(SC520_PAR12, 0x8bffe800); /* romcs2 */ - write_mmcr_long(SC520_PAR13, 0xcbfff000); + write_mmcr_long(SC520_PAR13, 0xcbfff000); /* romcs1 */ - write_mmcr_long(SC520_PAR14, 0xabfff800); + write_mmcr_long(SC520_PAR14, 0xabfff800); /* 680 LEDS */ - write_mmcr_long(SC520_PAR15, 0x30000640); - - asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ + write_mmcr_long(SC520_PAR15, 0x30000640); + + asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ if (CFG_USE_SIO_UART) { - write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS); + write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS); setup_ali_sio(1); } else { - write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS)); + write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS)); setup_ali_sio(0); silence_uart(0x3e8); silence_uart(0x2e8); @@ -242,21 +242,21 @@ static void bus_init(void) int board_init(void) { DECLARE_GLOBAL_DATA_PTR; - - init_sc520(); + + init_sc520(); bus_init(); irq_init(); - + /* max drive current on SDRAM */ write_mmcr_word(SC520_DSCTL, 0x0100); - + /* enter debug mode after next reset (only if jumper is also set) */ write_mmcr_byte(SC520_RESCFG, 0x08); - + /* configure the software timer to 33.333MHz */ write_mmcr_byte(SC520_SWTMRCFG, 0); gd->bus_clk = 33333000; - + return 0; } @@ -277,14 +277,14 @@ int last_stage_init(void) { int minor; int major; - + major = minor = 0; major |= ali512x_cio_in(23)?2:0; major |= ali512x_cio_in(22)?1:0; minor |= ali512x_cio_in(21)?2:0; minor |= ali512x_cio_in(20)?1:0; - + printf("AMD SC520 CDP revision %d.%d\n", major, minor); - + return 0; } diff --git a/board/utx8245/utx8245.c b/board/utx8245/utx8245.c index 249862a5a4..63b4e3ee85 100644 --- a/board/utx8245/utx8245.c +++ b/board/utx8245/utx8245.c @@ -143,7 +143,7 @@ static struct pci_controller utx8245_hose = { #endif /*CONFIG_PCI_PNP*/ }; -void pci_init (void) +void pci_init_board (void) { pci_mpc824x_init(&utx8245_hose); diff --git a/common/env_common.c b/common/env_common.c index 4f618d633f..ea08501320 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -128,6 +128,9 @@ uchar default_environment[] = { #ifdef CONFIG_CLOCKS_IN_MHZ "clocks_in_mhz=1\0" #endif +#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) + "pcidelay=" MK_STR(CONFIG_PCI_BOOTDELAY) "\0" +#endif #ifdef CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS #endif diff --git a/common/environment.c b/common/environment.c index 1df3872903..244c2a26ba 100644 --- a/common/environment.c +++ b/common/environment.c @@ -164,6 +164,9 @@ env_t environment __PPCENV__ = { #ifdef CONFIG_CLOCKS_IN_MHZ "clocks_in_mhz=" "1" "\0" #endif +#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) + "pcidelay=" MK_STR(CONFIG_PCI_BOOTDELAY) "\0" +#endif #ifdef CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS #endif diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 1c2c59b9bd..fbd4d6db21 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -376,7 +376,7 @@ static struct pci_controller hose = { config_table: pci_405gp_config_table, }; -void pci_init(void) +void pci_init_board(void) { /*we want the ptrs to RAM not flash (ie don't use init list)*/ hose.fixup_irq = pci_405gp_fixup_irq; @@ -494,7 +494,7 @@ void pci_440_init (struct pci_controller *hose) } -void pci_init(void) +void pci_init_board(void) { pci_440_init (&ppc440_hose); } diff --git a/drivers/pci.c b/drivers/pci.c index dc58abfe48..9eaaa15abd 100644 --- a/drivers/pci.c +++ b/drivers/pci.c @@ -505,4 +505,23 @@ int pci_hose_scan(struct pci_controller *hose) return pci_hose_scan_bus(hose, hose->first_busno); } +void pci_init(void) +{ +#if defined(CONFIG_PCI_BOOTDELAY) + char *s; + int i; + + /* wait "pcidelay" ms (if defined)... */ + s = getenv ("pcidelay"); + if (s) { + int val = simple_strtoul (s, NULL, 10); + for (i=0; i /* ARM version to be fixed! */ #endif /* CONFIG_ARM */ #ifdef CONFIG_I386 /* x86 version to be fixed! */ -# include +# include #endif /* CONFIG_I386 */ void pci_init (void); +void pci_init_board(void); void pciinfo (int, int); #if defined(CONFIG_PCI) && defined(CONFIG_440) diff --git a/include/configs/AR405.h b/include/configs/AR405.h index 56bb15b050..acb2fb678c 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -122,6 +122,10 @@ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ +#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ + +#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ + #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CFG_PCI_SUBSYS_DEVICEID 0x0403 /* PCI Device ID: ARISTO405 */ #define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 6b983472d7..845b47bebf 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -74,6 +74,7 @@ CFG_CMD_IRQ | \ CFG_CMD_IDE | \ CFG_CMD_ELF | \ + CFG_CMD_MII | \ CFG_CMD_EEPROM ) #define CONFIG_MAC_PARTITION @@ -144,6 +145,8 @@ #define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ +#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ + #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 05338274e7..18cec98846 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -80,6 +80,7 @@ CFG_CMD_DATE | \ CFG_CMD_JFFS2 | \ CFG_CMD_I2C | \ + CFG_CMD_MII | \ CFG_CMD_EEPROM ) #define CONFIG_MAC_PARTITION @@ -150,6 +151,8 @@ #define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ +#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ + #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h index 04ce99dfa1..55bb1ec673 100644 --- a/include/configs/CPCI440.h +++ b/include/configs/CPCI440.h @@ -237,6 +237,10 @@ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ +#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ + +#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ + #define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ #define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ #define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 1bf40d951f..bac6221194 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -120,6 +120,10 @@ #define CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ +#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ + +#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ + #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CFG_PCI_SUBSYS_DEVICEID 0x0404 /* PCI Device ID: CPCI-ISER4 */ #define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index 5971fb42e8..0ac456ab57 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -120,6 +120,8 @@ #define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ +#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ + #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CFG_PCI_SUBSYS_DEVICEID 0x0410 /* PCI Device ID: OCRTC */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index 87b41ea594..de10b02ea4 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -142,6 +142,9 @@ static uchar default_environment[] = { #ifdef CONFIG_CLOCKS_IN_MHZ "clocks_in_mhz=" "1" "\0" #endif +#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) + "pcidelay=" MK_STR(CONFIG_PCI_BOOTDELAY) "\0" +#endif #ifdef CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS #endif @@ -387,8 +390,8 @@ static int flash_io (int mode) char *data; if ((fd = open(DEVNAME(curdev), mode)) < 0) { - fprintf (stderr, - "Can't open %s: %s\n", + fprintf (stderr, + "Can't open %s: %s\n", DEVNAME(curdev), strerror(errno)); return (-1); } @@ -403,8 +406,8 @@ static int flash_io (int mode) /* switch to next partition for writing */ otherdev = !curdev; if ((fdr = open(DEVNAME(otherdev), mode)) < 0) { - fprintf (stderr, - "Can't open %s: %s\n", + fprintf (stderr, + "Can't open %s: %s\n", DEVNAME(otherdev), strerror(errno)); return (-1); } @@ -428,20 +431,20 @@ static int flash_io (int mode) resid = DEVESIZE(otherdev) - CFG_ENV_SIZE; if (resid) { if ((data = malloc(resid)) == NULL) { - fprintf(stderr, + fprintf(stderr, "Cannot malloc %d bytes: %s\n", resid, strerror(errno)); return (-1); } if (lseek (fdr, DEVOFFSET(otherdev) + CFG_ENV_SIZE, SEEK_SET) == -1) { fprintf (stderr, - "seek error on %s: %s\n", + "seek error on %s: %s\n", DEVNAME(otherdev), strerror(errno)); return (-1); } if ((rc = read (fdr, data, resid)) != resid) { fprintf (stderr, - "read error on %s: %s\n", + "read error on %s: %s\n", DEVNAME(otherdev), strerror(errno)); return (-1); } @@ -462,26 +465,26 @@ static int flash_io (int mode) printf("Writing environment to %s...\n",DEVNAME(otherdev)); if (lseek (fdr, DEVOFFSET(otherdev), SEEK_SET) == -1) { fprintf (stderr, - "seek error on %s: %s\n", + "seek error on %s: %s\n", DEVNAME(otherdev), strerror(errno)); return (-1); } if (write(fdr, &environment, len) != len) { fprintf (stderr, - "CRC write error on %s: %s\n", + "CRC write error on %s: %s\n", DEVNAME(otherdev), strerror(errno)); return (-1); } if (write(fdr, environment.data, ENV_SIZE) != ENV_SIZE) { fprintf (stderr, - "Write error on %s: %s\n", + "Write error on %s: %s\n", DEVNAME(otherdev), strerror(errno)); return (-1); } if (resid) { if (write (fdr, data, resid) != resid) { fprintf (stderr, - "write error on %s: %s\n", + "write error on %s: %s\n", DEVNAME(curdev), strerror(errno)); return (-1); } @@ -491,14 +494,14 @@ static int flash_io (int mode) /* change flag on current active env partition */ if (lseek (fd, DEVOFFSET(curdev) + sizeof(ulong), SEEK_SET) == -1) { fprintf (stderr, - "seek error on %s: %s\n", + "seek error on %s: %s\n", DEVNAME(curdev), strerror(errno)); return (-1); } - if (write (fd, &obsolete_flag, sizeof(obsolete_flag)) != + if (write (fd, &obsolete_flag, sizeof(obsolete_flag)) != sizeof(obsolete_flag)) { fprintf (stderr, - "Write error on %s: %s\n", + "Write error on %s: %s\n", DEVNAME(curdev), strerror(errno)); return (-1); } @@ -514,7 +517,7 @@ static int flash_io (int mode) ioctl (fd, MEMLOCK, &erase); if (close(fdr)) { fprintf (stderr, - "I/O error on %s: %s\n", + "I/O error on %s: %s\n", DEVNAME(otherdev), strerror(errno)); return (-1); } @@ -524,19 +527,19 @@ static int flash_io (int mode) if (lseek (fd, DEVOFFSET(curdev), SEEK_SET) == -1) { fprintf (stderr, - "seek error on %s: %s\n", + "seek error on %s: %s\n", DEVNAME(curdev), strerror(errno)); return (-1); } if (read (fd, &environment, len) != len) { fprintf (stderr, - "CRC read error on %s: %s\n", + "CRC read error on %s: %s\n", DEVNAME(curdev), strerror(errno)); return (-1); } if ((rc = read (fd, environment.data, ENV_SIZE)) != ENV_SIZE) { fprintf (stderr, - "Read error on %s: %s\n", + "Read error on %s: %s\n", DEVNAME(curdev), strerror(errno)); return (-1); } @@ -544,7 +547,7 @@ static int flash_io (int mode) if (close(fd)) { fprintf (stderr, - "I/O error on %s: %s\n", + "I/O error on %s: %s\n", DEVNAME(curdev), strerror(errno)); return (-1); } @@ -584,50 +587,50 @@ static int env_init(void) if (parse_config()) /* should fill envdevices */ return 1; - + if ((addr1 = calloc (1, ENV_SIZE)) == NULL) { - fprintf (stderr, + fprintf (stderr, "Not enough memory for environment (%ld bytes)\n", ENV_SIZE); return (errno); } - + /* read environment from FLASH to local buffer */ environment.data = addr1; curdev = 0; if (flash_io (O_RDONLY)) { return (errno); } - - crc1_ok = ((crc1 = crc32(0, environment.data, ENV_SIZE)) + + crc1_ok = ((crc1 = crc32(0, environment.data, ENV_SIZE)) == environment.crc); if (!HaveRedundEnv) { if (!crc1_ok) { - fprintf (stderr, + fprintf (stderr, "Warning: Bad CRC, using default environment\n"); environment.data = default_environment; free(addr1); } } else { flag1 = environment.flags; - + curdev = 1; if ((addr2 = calloc (1, ENV_SIZE)) == NULL) { - fprintf (stderr, + fprintf (stderr, "Not enough memory for environment (%ld bytes)\n", ENV_SIZE); return (errno); - } + } environment.data = addr2; - + if (flash_io (O_RDONLY)) { return (errno); } - - crc2_ok = ((crc2 = crc32(0, environment.data, ENV_SIZE)) + + crc2_ok = ((crc2 = crc32(0, environment.data, ENV_SIZE)) == environment.crc); flag2 = environment.flags; - + if (crc1_ok && ! crc2_ok) { environment.data = addr1; environment.flags = flag1; @@ -643,7 +646,7 @@ static int env_init(void) free(addr1); } else if (! crc1_ok && ! crc2_ok) { - fprintf (stderr, + fprintf (stderr, "Warning: Bad CRC, using default environment\n"); environment.data = default_environment; curdev = 0; @@ -717,15 +720,15 @@ static int parse_config() #endif #endif if (stat (DEVNAME(0), &st)) { - fprintf (stderr, - "Cannot access MTD device %s: %s\n", + fprintf (stderr, + "Cannot access MTD device %s: %s\n", DEVNAME(0), strerror(errno)); return 1; } - + if (HaveRedundEnv && stat (DEVNAME(1), &st)) { - fprintf (stderr, - "Cannot access MTD device %s: %s\n", + fprintf (stderr, + "Cannot access MTD device %s: %s\n", DEVNAME(2), strerror(errno)); return 1; } @@ -744,12 +747,12 @@ static int get_config (char *fname) return 1; } - while ((i < 2) && + while ((i < 2) && ((rc = fscanf (fp, "%s %lx %lx %lx", DEVNAME(i), &DEVOFFSET(i), &ENVSIZE(i), &DEVESIZE(i))) != EOF)) { /* Skip incomplete conversions and comment strings */ - if ((rc < 3) || (*DEVNAME(i) == '#')) { + if ((rc < 3) || (*DEVNAME(i) == '#')) { fgets (dump, sizeof(dump), fp); /* Consume till end */ continue; } @@ -757,7 +760,7 @@ static int get_config (char *fname) i++; } fclose(fp); - + HaveRedundEnv = i - 1; if (!i) { /* No valid entries found */ errno = EINVAL;