From: Robert Marko Date: Tue, 14 Nov 2017 11:15:03 +0000 (+0100) Subject: ar71xx: complete support for RB mAP 2nD X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=ac4a52b5c80fd877503251a299f7ca6f1cc394e6;p=librecmc%2Flibrecmc.git ar71xx: complete support for RB mAP 2nD This patch adds support for the MikroTik RouterBOARD mAP 2nD https://mikrotik.com/product/RBmAP2nD Specifications: - SoC: Qualcomm QCA9531 (650 MHz) - RAM: 64 MB - Storage: 16 MB NOR SPI flash - Wireless: builtin QCA9531, 2x2:2 - Ethernet: 2x100M (802.3af/at POE in and passive POE out on ETH2) - USB: microUSB type AB port This patch adds missing code to fully support mAP. Machfile already contained configuration for mAP 2nD, but device specific configuration like LEDs etc., was missing. Note: The POE LED works but doesn't turn on when POE passthrough is enabled, despite being configured with GPIO trigger. Installation 1. Login to the Mikrotik WebUI to backup your licence keys 2. Setup a DHCP/BOOTP server with: - DHCP-Option 66 (TFTP server name) pointing to a local TFTP server within the same subnet of the DHCP range - DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. Connect the port labeled internet to your local network 4. Keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP server. Login as root/without password to the started LEDE via SSH listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: - rbcfg set boot_protocol bootp - rbcfg set boot_device ethnand - rbcfg apply Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall. Signed-off-by: Robert Marko --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 867fa9d381..97abd91423 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -320,6 +320,12 @@ rb-lhg-5nd) ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "rb:green:rssi3" "wlan0" "60" "100" "-59" "13" ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "rb:green:rssi4" "wlan0" "80" "100" "-79" "13" ;; +rb-map-2nd) + ucidef_set_led_switch "eth1" "WAN" "rb:green:eth1" "switch0" "0x02" + ucidef_set_led_switch "eth2" "LAN" "rb:green:eth2" "switch0" "0x04" + ucidef_set_led_gpio "poe" "POE" "rb:red:poe_out" "14" "0" + ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" + ;; rb-mapl-2nd) ucidef_set_led_default "power" "POWER" "rb:green:power" "1" ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index a5b8a95cc8..614c82de05 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -419,6 +419,10 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch1" \ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" ;; + rb-map-2nd) + ucidef_add_switch "switch0" \ + "0@eth0" "1:wan" "2:lan" + ;; tellstick-znet-lite) ucidef_set_interface_wan "eth0" ucidef_set_interface_raw "wlan" "wlan0" "dhcp" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index e767eec520..3fcbe306ad 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -320,6 +320,7 @@ get_status_led() { rb-952ui-5ac2nd|\ rb-962uigs-5hact2hnt|\ rb-lhg-5nd|\ + rb-map-2nd|\ rb-mapl-2nd) status_led="rb:green:user" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 702ed215ca..306af08cc5 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -965,6 +965,9 @@ ar71xx_board_detect() { *"RouterBOARD LHG 5nD") name="rb-lhg-5nd" ;; + *"RouterBOARD mAP 2nD") + name="rb-map-2nd" + ;; *"RouterBOARD mAP L-2nD") name="rb-mapl-2nd" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 4639ae32cf..e7947a319f 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -666,6 +666,7 @@ platform_check_image() { rb-952ui-5ac2nd|\ rb-962uigs-5hact2hnt|\ rb-lhg-5nd|\ + rb-map-2nd|\ rb-mapl-2nd|\ rb-wap-2nd) return 0 @@ -726,6 +727,7 @@ platform_pre_upgrade() { rb-952ui-5ac2nd|\ rb-962uigs-5hact2hnt|\ rb-lhg-5nd|\ + rb-map-2nd|\ rb-mapl-2nd|\ rb-wap-2nd) # erase firmware if booted from initramfs diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 77e523bcc4..aa29052316 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1024,6 +1024,7 @@ config ATH79_MACH_RBSPI select ATH79_ROUTERBOOT help Say 'Y' here if you want your kernel to support the + MikroTik RouterBOARD mAP MikroTik RouterBOARD mAP lite MikroTik RouterBOARD hAP lite MikroTik RouterBOARD hAP @@ -1034,7 +1035,6 @@ config ATH79_MACH_RBSPI MikroTik RouterBOARD Powerbox MikroTik RouterBOARD LHG 5 MikroTik RouterBOARD cAP (EXPERIMENTAL) - MikroTik RouterBOARD mAP (EXPERIMENTAL) MikroTik RouterBOARD wAP config ATH79_MACH_RBSXTLITE diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c index 2e1ecd0f52..cfd7373164 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c @@ -1,6 +1,7 @@ /* * MikroTik SPI-NOR RouterBOARDs support * + * - MikroTik RouterBOARD mAP 2nD * - MikroTik RouterBOARD mAP L-2nD * - MikroTik RouterBOARD 941L-2nD * - MikroTik RouterBOARD 951Ui-2nD @@ -14,7 +15,6 @@ * * Preliminary support for the following hardware * - MikroTik RouterBOARD cAP2nD - * - MikroTik RouterBOARD mAP2nD * Furthermore, the cAP lite (cAPL2nD) appears to feature the exact same * hardware as the mAP L-2nD. It is unknown if they share the same board * identifier. @@ -405,7 +405,7 @@ static struct gpio_led rbmap_leds[] __initdata = { .active_low = 1, }, { .name = "rb:green:eth2", - .gpio = RBMAP_GPIO_LED_WLAN, + .gpio = RBMAP_GPIO_LED_LAN2, .active_low = 1, }, { .name = "rb:red:poe_out", @@ -920,13 +920,14 @@ static void __init rbcap_setup(void) } /* - * Init the mAP hardware (EXPERIMENTAL). - * The mAP 2nD has two ethernet ports, PoE output and an SSR for LED - * multiplexing. + * Init the mAP hardware. + * The mAP 2nD has two ethernet ports, PoE output, SSR for LED + * multiplexing and USB port. */ static void __init rbmap_setup(void) { - u32 flags = RBSPI_HAS_WLAN0 | RBSPI_HAS_SSR | RBSPI_HAS_POE; + u32 flags = RBSPI_HAS_USB | RBSPI_HAS_WLAN0 | + RBSPI_HAS_SSR | RBSPI_HAS_POE; if (rbspi_platform_setup()) return; @@ -939,10 +940,22 @@ static void __init rbmap_setup(void) if (flags & RBSPI_HAS_POE) gpio_request_one(RBMAP_GPIO_POE_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "POE power"); + /* USB power GPIO is inverted, set GPIOF_ACTIVE_LOW for consistency */ + if (flags & RBSPI_HAS_USB) + gpio_request_one(RBMAP_GPIO_USB_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_ACTIVE_LOW | + GPIOF_EXPORT_DIR_FIXED, + "USB power"); + ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmap_leds), rbmap_leds); + + /* mAP 2nD has a single reset button as gpio 16 */ + ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rbspi_gpio_keys_reset16), + rbspi_gpio_keys_reset16); } diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk index 5ee3eee65e..46d2a3e3a6 100644 --- a/target/linux/ar71xx/image/mikrotik.mk +++ b/target/linux/ar71xx/image/mikrotik.mk @@ -25,12 +25,12 @@ TARGET_DEVICES += nand-64m nand-large define Device/rb-nor-flash-16M DEVICE_TITLE := MikroTik RouterBoard (16 MB SPI NOR) - DEVICE_PACKAGES := rbcfg rssileds -nand-utils + DEVICE_PACKAGES := rbcfg rssileds -nand-utils kmod-ledtrig-gpio IMAGE_SIZE := 16000k LOADER_TYPE := elf KERNEL_INSTALL := 1 KERNEL := kernel-bin | lzma | loader-kernel - SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-962uigs-5hact2hnt rb-lhg-5nd rb-mapl-2nd rb-wap-2nd + SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-962uigs-5hact2hnt rb-lhg-5nd rb-map-2nd rb-mapl-2nd rb-wap-2nd IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 -e | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef diff --git a/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch b/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch index fc3091ec65..1ad5fa68a1 100644 --- a/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch +++ b/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/prom.c +++ b/arch/mips/ath79/prom.c -@@ -136,6 +136,28 @@ void __init prom_init(void) +@@ -136,6 +136,29 @@ void __init prom_init(void) initrd_end = initrd_start + fw_getenvl("initrd_size"); } #endif @@ -20,6 +20,7 @@ + strstr(arcs_cmdline, "board=962") || + strstr(arcs_cmdline, "board=lhg") || + strstr(arcs_cmdline, "board=map-hb") || ++ strstr(arcs_cmdline, "board=map2-hb") || + strstr(arcs_cmdline, "board=wap-hb") || + strstr(arcs_cmdline, "board=2011L") || + strstr(arcs_cmdline, "board=2011r") || diff --git a/target/linux/ar71xx/patches-4.9/701-MIPS-ath79-add-routerboard-detection.patch b/target/linux/ar71xx/patches-4.9/701-MIPS-ath79-add-routerboard-detection.patch index fc3091ec65..1ad5fa68a1 100644 --- a/target/linux/ar71xx/patches-4.9/701-MIPS-ath79-add-routerboard-detection.patch +++ b/target/linux/ar71xx/patches-4.9/701-MIPS-ath79-add-routerboard-detection.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/prom.c +++ b/arch/mips/ath79/prom.c -@@ -136,6 +136,28 @@ void __init prom_init(void) +@@ -136,6 +136,29 @@ void __init prom_init(void) initrd_end = initrd_start + fw_getenvl("initrd_size"); } #endif @@ -20,6 +20,7 @@ + strstr(arcs_cmdline, "board=962") || + strstr(arcs_cmdline, "board=lhg") || + strstr(arcs_cmdline, "board=map-hb") || ++ strstr(arcs_cmdline, "board=map2-hb") || + strstr(arcs_cmdline, "board=wap-hb") || + strstr(arcs_cmdline, "board=2011L") || + strstr(arcs_cmdline, "board=2011r") ||