From: Vignesh Raghavendra Date: Thu, 2 Apr 2020 13:29:13 +0000 (+0530) Subject: arm: dts: k3-j721e: Increase OSPI default frequency to 50MHz X-Git-Tag: v2020.07-rc1~29^2~2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=aaf55800a36fc9ffede4d072e96231a1deaa8a43;p=oweals%2Fu-boot.git arm: dts: k3-j721e: Increase OSPI default frequency to 50MHz In 1 bit mode OSPI can work at upto 50MHz, this provides better write performance. Therefore increase frequency from 40MHz to 50MHz Signed-off-by: Vignesh Raghavendra --- diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts index 403b158f49..2dde65d968 100644 --- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts @@ -309,7 +309,7 @@ reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <8>; - spi-max-frequency = <40000000>; + spi-max-frequency = <50000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; diff --git a/arch/arm/dts/k3-j721e-som-p0.dtsi b/arch/arm/dts/k3-j721e-som-p0.dtsi index 8497ff3e3e..946de9c3fc 100644 --- a/arch/arm/dts/k3-j721e-som-p0.dtsi +++ b/arch/arm/dts/k3-j721e-som-p0.dtsi @@ -87,7 +87,7 @@ reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <8>; - spi-max-frequency = <40000000>; + spi-max-frequency = <50000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>;