From: Dario Binacchi Date: Sat, 22 Feb 2020 13:05:44 +0000 (+0100) Subject: video: omap: create two routines to set the pixel clock rate X-Git-Tag: v2020.07-rc1~41^2~7^2~24 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=a9df3c50ed7d4535fbd33675ab943deaa0dfd9a8;p=oweals%2Fu-boot.git video: omap: create two routines to set the pixel clock rate Created in preparation to support driver-model, they can also be called from legacy code. In this way, code duplication is avoided. Signed-off-by: Dario Binacchi --- diff --git a/drivers/video/am335x-fb.c b/drivers/video/am335x-fb.c index 684223f275..c426ff8aec 100644 --- a/drivers/video/am335x-fb.c +++ b/drivers/video/am335x-fb.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include "am335x-fb.h" @@ -26,6 +27,7 @@ #define LCDC_FMAX 200000000 /* LCD Control Register */ +#define LCDC_CTRL_CLK_DIVISOR_MASK GENMASK(15, 8) #define LCDC_CTRL_RASTER_MODE BIT(0) #define LCDC_CTRL_CLK_DIVISOR(x) (((x) & GENMASK(7, 0)) << 8) /* LCD Clock Enable Register */ @@ -98,10 +100,95 @@ struct am335x_lcdhw { unsigned int clkc_reset; /* 0x70 */ }; +struct dpll_data { + unsigned long rounded_rate; + u16 rounded_m; + u8 rounded_n; + u8 rounded_div; +}; + static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE; DECLARE_GLOBAL_DATA_PTR; +/** + * am335x_dpll_round_rate() - Round a target rate for an OMAP DPLL + * + * @dpll_data: struct dpll_data pointer for the DPLL + * @rate: New DPLL clock rate + * @return rounded rate and the computed m, n and div values in the dpll_data + * structure, or -ve error code. + */ +static ulong am335x_dpll_round_rate(struct dpll_data *dd, ulong rate) +{ + unsigned int m, n, d; + unsigned long rounded_rate; + int err, err_r; + + dd->rounded_rate = -EFAULT; + err = rate; + err_r = err; + + for (d = 2; err && d < 255; d++) { + for (m = 2; m < 2047; m++) { + if ((V_OSCK * m) < (rate * d)) + continue; + + n = (V_OSCK * m) / (rate * d); + if (n > 127) + break; + + if (((V_OSCK * m) / n) > LCDC_FMAX) + break; + + rounded_rate = (V_OSCK * m) / n / d; + err = abs(rounded_rate - rate); + if (err < err_r) { + err_r = err; + dd->rounded_rate = rounded_rate; + dd->rounded_m = m; + dd->rounded_n = n; + dd->rounded_div = d; + if (err == 0) + break; + } + } + } + + debug("DPLL display: best error %d Hz (M %d, N %d, DIV %d)\n", + err_r, dd->rounded_m, dd->rounded_n, dd->rounded_div); + + return dd->rounded_rate; +} + +/** + * am335x_fb_set_pixel_clk_rate() - Set pixel clock rate. + * + * @am335x_lcdhw: Base address of the LCD controller registers. + * @rate: New clock rate in Hz. + * @return new rate, or -ve error code. + */ +static ulong am335x_fb_set_pixel_clk_rate(struct am335x_lcdhw *regs, ulong rate) +{ + struct dpll_params dpll_disp = { 1, 0, 1, -1, -1, -1, -1 }; + struct dpll_data dd; + ulong round_rate; + u32 reg; + + round_rate = am335x_dpll_round_rate(&dd, rate); + if (IS_ERR_VALUE(round_rate)) + return round_rate; + + dpll_disp.m = dd.rounded_m; + dpll_disp.n = dd.rounded_n; + do_setup_dpll(&dpll_disp_regs, &dpll_disp); + + reg = readl(®s->ctrl) & ~LCDC_CTRL_CLK_DIVISOR_MASK; + reg |= LCDC_CTRL_CLK_DIVISOR(dd.rounded_div); + writel(reg, ®s->ctrl); + return round_rate; +} + int lcd_get_size(int *line_length) { *line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; @@ -111,11 +198,9 @@ int lcd_get_size(int *line_length) int am335xfb_init(struct am335x_lcdpanel *panel) { u32 raster_ctrl = 0; - struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL; - struct dpll_params dpll_disp = { 1, 0, 1, -1, -1, -1, -1 }; - unsigned int m, n, d, best_d = 2; - int err = 0, err_r = 0; + ulong rate; + u32 reg; if (gd->fb_base == 0) { printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n"); @@ -156,34 +241,9 @@ int am335xfb_init(struct am335x_lcdpanel *panel) debug("using frambuffer at 0x%08x with size %d.\n", (unsigned int)gd->fb_base, FBSIZE(panel)); - /* setup display pll for requested clock frequency */ - err = panel->pxl_clk; - err_r = err; - - for (d = 2; err_r && d < 255; d++) { - for (m = 2; m < 2047; m++) { - if ((V_OSCK * m) < (panel->pxl_clk * d)) - continue; - n = (V_OSCK * m) / (panel->pxl_clk * d); - if (n > 127) - break; - if (((V_OSCK * m) / n) > LCDC_FMAX) - break; - - err = abs((V_OSCK * m) / n / d - panel->pxl_clk); - if (err < err_r) { - err_r = err; - dpll_disp.m = m; - dpll_disp.n = n; - best_d = d; - if (err_r == 0) - break; - } - } - } - debug("%s: PLL: best error %d Hz (M %d, N %d, DIV %d)\n", - __func__, err_r, dpll_disp.m, dpll_disp.n, best_d); - do_setup_dpll(&dpll_disp_regs, &dpll_disp); + rate = am335x_fb_set_pixel_clk_rate(lcdhw, panel->pxl_clk); + if (IS_ERR_VALUE(rate)) + return rate; /* clock source for LCDC from dispPLL M2 */ writel(0x0, &cmdpll->clklcdcpixelclk); @@ -203,7 +263,11 @@ int am335xfb_init(struct am335x_lcdpanel *panel) lcdhw->clkc_enable = LCDC_CLKC_ENABLE_CORECLKEN | LCDC_CLKC_ENABLE_LIDDCLKEN | LCDC_CLKC_ENABLE_DMACLKEN; lcdhw->raster_ctrl = 0; - lcdhw->ctrl = LCDC_CTRL_CLK_DIVISOR(best_d) | LCDC_CTRL_RASTER_MODE; + + reg = lcdhw->ctrl & LCDC_CTRL_CLK_DIVISOR_MASK; + reg |= LCDC_CTRL_RASTER_MODE; + lcdhw->ctrl = reg; + lcdhw->lcddma_fb0_base = gd->fb_base; lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel); lcdhw->lcddma_fb1_base = gd->fb_base;