From: Chuanhong Guo Date: Mon, 15 Jul 2019 11:43:31 +0000 (+0800) Subject: ath79: add support for Qihoo C301 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=a9360452f0130bb39a8e732334a174cc3f8991fd;p=oweals%2Fopenwrt.git ath79: add support for Qihoo C301 Specifications: - SoC: AR9344 - RAM: 128MB - Flash: 2 * 16MB (MX25L12845) - Ethernet: 2 * FE LAN & 1 * FE WAN - WiFi: 2.4G: AR9344 5G: QCA9882 Flash instruction: 1. Hold reset and power up the router 2. Set your IP to 192.168.1.x 3. Open 192.168.1.1 and upload the generated *factory* firmware Signed-off-by: Chuanhong Guo --- diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index 069d7be06b..cc11725242 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -29,6 +29,9 @@ openmesh,om5p-ac-v2|\ yuncore,a770) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000" ;; +qihoo,c301) + ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x10000" "0x10000" + ;; esac config_load ubootenv diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 46b3e51193..ecfb7b0694 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -104,6 +104,9 @@ pcs,cr3000) ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10" ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02" ;; +qihoo,c301) + ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt" + ;; tplink,archer-a7-v5|\ tplink,archer-c7-v4|\ tplink,archer-c7-v5) diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 85e57c6eb5..f7cac3e300 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -184,6 +184,11 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "3:lan:1" "5:lan:2" "4:wan" ;; + qihoo,c301) + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan" "3:lan" + ;; rosinson,wr818) ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:wan" @@ -328,6 +333,10 @@ ath79_setup_macs() lan_mac=$(k2t_get_mac "lan_mac") wan_mac=$(k2t_get_mac "wan_mac") ;; + qihoo,c301) + lan_mac=$(mtd_get_mac_ascii devdata lanmac) + wan_mac=$(mtd_get_mac_ascii devdata wanmac) + ;; rosinson,wr818) wan_mac=$(mtd_get_mac_binary factory 0) lan_mac=$(macaddr_setbit_la "$wan_mac") diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 5a20b84344..f049dbd46a 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -127,6 +127,10 @@ case "$FIRMWARE" in ath9k_eeprom_extract "art" 4096 1088 ath9k_patch_fw_mac $(mtd_get_mac_text board_data 1664) 2 ;; + qihoo,c301) + ath9k_eeprom_extract "radiocfg" 4096 1088 + ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2 + ;; *) ath9k_eeprom_die "board $board is not supported yet" ;; diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 06a48e2258..149d744eb8 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -138,6 +138,10 @@ case "$FIRMWARE" in ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; + qihoo,c301) + ath10kcal_extract "radiocfg" 20480 2116 + ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) + ;; tplink,archer-a7-v5|\ tplink,archer-c2-v3|\ tplink,archer-c7-v4|\ diff --git a/target/linux/ath79/base-files/etc/init.d/bootcount b/target/linux/ath79/base-files/etc/init.d/bootcount new file mode 100755 index 0000000000..b71fbf9a69 --- /dev/null +++ b/target/linux/ath79/base-files/etc/init.d/bootcount @@ -0,0 +1,11 @@ +#!/bin/sh /etc/rc.common +START=99 + +boot() { + case $(board_name) in + qihoo,c301) + local n=$(fw_printenv activeregion | cut -d = -f 2) + fw_setenv "image${n}trynum" 0 + ;; + esac +} diff --git a/target/linux/ath79/config-4.19 b/target/linux/ath79/config-4.19 index 6cdbb968c3..3843702a38 100644 --- a/target/linux/ath79/config-4.19 +++ b/target/linux/ath79/config-4.19 @@ -167,6 +167,7 @@ CONFIG_MTD_PARSER_CYBERTAN=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPLIT_LZMA_FW=y +CONFIG_MTD_SPLIT_SEAMA_FW=y CONFIG_MTD_SPLIT_TPLINK_FW=y CONFIG_MTD_SPLIT_UIMAGE_FW=y CONFIG_MTD_TPLINK_PARTS=y diff --git a/target/linux/ath79/dts/ar9344_qihoo_c301.dts b/target/linux/ath79/dts/ar9344_qihoo_c301.dts new file mode 100644 index 0000000000..746c7f588e --- /dev/null +++ b/target/linux/ath79/dts/ar9344_qihoo_c301.dts @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "ar9344.dtsi" + +/ { + model = "Qihoo 360 C301"; + compatible = "qihoo,c301"; + + aliases { + led-boot = &led_wlan_g; + led-failsafe = &led_wlan_o; + led-upgrade = &led_wlan_o; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + led_wlan_g: wlan_g { + label = "c301:green:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + + led_wlan_o: wlan_o { + label = "c301:orange:wlan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + linux,code = ; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + reg_eth_led_vbus { + compatible = "regulator-fixed"; + regulator-name = "eth_led_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio 18 GPIO_ACTIVE_LOW>; + }; + + reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinmux { + pmx_spi_cs1: pinmux_spi_cs1 { + pinctrl-single,bits = <0xc 0x07 0xff>; + }; + + pmx_led_switch: pinmux_led_switch { + pinctrl-single,bits = <0x0 0x2b2a2d00 0xffffff00>; + }; +}; + +&ref { + clock-frequency = <40000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; + + gpio_ext_lna0 { + gpio-hog; + gpios = <14 0>; + output-high; + line-name = "c301:ext:lna0"; + }; + + gpio_ext_lna1 { + gpio-hog; + gpios = <15 0>; + output-high; + line-name = "c301:ext:lna1"; + }; +}; + +&builtin_switch { + pinctrl-names = "default"; + pinctrl-0 = <&pmx_led_switch>; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pmx_spi_cs1>; + status = "okay"; + + num-cs = <2>; + cs-gpios= <0>, <0>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "devdata"; + reg = <0x50000 0x10000>; + read-only; + }; + + partition@60000 { + label = "devconf"; + reg = <0x60000 0x10000>; + read-only; + }; + + partition@70000 { + compatible = "seama"; + label = "firmware"; + reg = <0x70000 0xf60000>; + }; + + partition@fd0000 { + label = "warm_start"; + reg = <0xfd0000 0x10000>; + read-only; + }; + + partition@fe0000 { + label = "action_image_config"; + reg = <0xfe0000 0x10000>; + }; + + partition@ff0000 { + label = "radiocfg"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware2"; + reg = <0x0 0xf00000>; + }; + + partition@f00000 { + label = "privatedata"; + reg = <0xf00000 0x100000>; + read-only; + }; + }; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&pcie { + status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + }; +}; + +&wmac { + status = "okay"; + qca,no-eeprom; +}; + +ð1 { + status = "okay"; + gmac-config { + device = <&gmac>; + switch-phy-swap = <1>; + switch-only-mode = <1>; + }; +}; + +ð0 { + status = "okay"; + phy-handle = <&swphy0>; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 0836751e2a..4662383541 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -728,6 +728,18 @@ define Device/phicomm_k2t endef TARGET_DEVICES += phicomm_k2t +define Device/qihoo_c301 + $(Device/seama) + ATH_SOC := ar9344 + DEVICE_VENDOR := Qihoo + DEVICE_MODEL := C301 + DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct uboot-envtools + IMAGE_SIZE := 15744k + SEAMA_SIGNATURE := wrgac26_qihoo360_360rg + SUPPORTED_DEVICES += qihoo-c301 +endef +TARGET_DEVICES += qihoo_c301 + define Device/rosinson_wr818 ATH_SOC := qca9563 DEVICE_VENDOR := Rosinson