From: Hans de Goede Date: Sun, 11 Jan 2015 18:33:35 +0000 (+0100) Subject: sunxi: usbc: Add support for usb-vbus0 controller by axp drivebus pin X-Git-Tag: v2015.04-rc1~113 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=a90e77dbeb92f78ec06547621a7b22a785a43a3d;p=oweals%2Fu-boot.git sunxi: usbc: Add support for usb-vbus0 controller by axp drivebus pin The axp221 / axp223's N_VBUSEN pin can be configured as an output rather then an input, and this is used on some boards to control usb-vbus0, add support for this. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/arch/arm/cpu/armv7/sunxi/usbc.c b/arch/arm/cpu/armv7/sunxi/usbc.c index 4f11da59d1..14de9f98bd 100644 --- a/arch/arm/cpu/armv7/sunxi/usbc.c +++ b/arch/arm/cpu/armv7/sunxi/usbc.c @@ -17,6 +17,15 @@ #include #include #include +#ifdef CONFIG_AXP152_POWER +#include +#endif +#ifdef CONFIG_AXP209_POWER +#include +#endif +#ifdef CONFIG_AXP221_POWER +#include +#endif #define SUNXI_USB_PMU_IRQ_ENABLE 0x800 #define SUNXI_USB_CSR 0x404 @@ -71,6 +80,12 @@ static struct sunxi_usbc_hcd { static int enabled_hcd_count; +static bool use_axp_drivebus(int index) +{ + return index == 0 && + strcmp(CONFIG_USB0_VBUS_PIN, "axp_drivebus") == 0; +} + void *sunxi_usbc_get_io_base(int index) { switch (index) { @@ -87,6 +102,9 @@ void *sunxi_usbc_get_io_base(int index) static int get_vbus_gpio(int index) { + if (use_axp_drivebus(index)) + return -1; + switch (index) { case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN); case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN); @@ -233,6 +251,10 @@ void sunxi_usbc_vbus_enable(int index) { struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index]; +#ifdef AXP_DRIVEBUS + if (use_axp_drivebus(index)) + axp_drivebus_enable(); +#endif if (sunxi_usbc->gpio_vbus != -1) gpio_direction_output(sunxi_usbc->gpio_vbus, 1); } @@ -241,6 +263,10 @@ void sunxi_usbc_vbus_disable(int index) { struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index]; +#ifdef AXP_DRIVEBUS + if (use_axp_drivebus(index)) + axp_drivebus_disable(); +#endif if (sunxi_usbc->gpio_vbus != -1) gpio_direction_output(sunxi_usbc->gpio_vbus, 0); }