From: Bin Meng <bmeng.cn@gmail.com>
Date: Wed, 22 Jul 2015 08:21:13 +0000 (-0700)
Subject: x86: qemu: Enable writing MP table
X-Git-Tag: v2015.10-rc1~10
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=a8ebf283e98d0eda0b7c76647cdcd3f36f34837c;p=oweals%2Fu-boot.git

x86: qemu: Enable writing MP table

Enable writing MP table for QEMU boads (i440fx and q35).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
---

diff --git a/arch/x86/cpu/qemu/pci.c b/arch/x86/cpu/qemu/pci.c
index ab93e76054..acbd922747 100644
--- a/arch/x86/cpu/qemu/pci.c
+++ b/arch/x86/cpu/qemu/pci.c
@@ -13,6 +13,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static bool i440fx;
+
 void board_pci_setup_hose(struct pci_controller *hose)
 {
 	hose->first_busno = 0;
@@ -61,7 +63,8 @@ int board_pci_post_scan(struct pci_controller *hose)
 	 * PCI device ID.
 	 */
 	device = x86_pci_read_config16(PCI_BDF(0, 0, 0), PCI_DEVICE_ID);
-	pam = (device == PCI_DEVICE_ID_INTEL_82441) ? I440FX_PAM : Q35_PAM;
+	i440fx = (device == PCI_DEVICE_ID_INTEL_82441);
+	pam = i440fx ? I440FX_PAM : Q35_PAM;
 
 	/*
 	 * Initialize Programmable Attribute Map (PAM) Registers
@@ -71,7 +74,7 @@ int board_pci_post_scan(struct pci_controller *hose)
 	for (i = 0; i < PAM_NUM; i++)
 		x86_pci_write_config8(PCI_BDF(0, 0, 0), pam + i, PAM_RW);
 
-	if (device == PCI_DEVICE_ID_INTEL_82441) {
+	if (i440fx) {
 		/*
 		 * Enable legacy IDE I/O ports decode
 		 *
@@ -97,10 +100,35 @@ int board_pci_post_scan(struct pci_controller *hose)
 	 * board, it shows as device 2, while for Q35 and ICH9 chipset board,
 	 * it shows as device 1.
 	 */
-	vga = (device == PCI_DEVICE_ID_INTEL_82441) ? I440FX_VGA : Q35_VGA;
+	vga = i440fx ? I440FX_VGA : Q35_VGA;
 	start = get_timer(0);
 	ret = pci_run_vga_bios(vga, NULL, PCI_ROM_USE_NATIVE);
 	debug("BIOS ran in %lums\n", get_timer(start));
 
 	return ret;
 }
+
+#ifdef CONFIG_GENERATE_MP_TABLE
+int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq)
+{
+	u8 irq;
+
+	if (i440fx) {
+		/*
+		 * Not like most x86 platforms, the PIRQ[A-D] on PIIX3 are not
+		 * connected to I/O APIC INTPIN#16-19. Instead they are routed
+		 * to an irq number controled by the PIRQ routing register.
+		 */
+		irq = x86_pci_read_config8(PCI_BDF(bus, dev, func),
+					   PCI_INTERRUPT_LINE);
+	} else {
+		/*
+		 * ICH9's PIRQ[A-H] are not consecutive numbers from 0 to 7.
+		 * PIRQ[A-D] still maps to [0-3] but PIRQ[E-H] maps to [8-11].
+		 */
+		irq = pirq < 8 ? pirq + 16 : pirq + 12;
+	}
+
+	return irq;
+}
+#endif
diff --git a/arch/x86/dts/qemu-x86_i440fx.dts b/arch/x86/dts/qemu-x86_i440fx.dts
index 0c522c860f..c26c71bcf7 100644
--- a/arch/x86/dts/qemu-x86_i440fx.dts
+++ b/arch/x86/dts/qemu-x86_i440fx.dts
@@ -24,6 +24,18 @@
 		stdout-path = "/serial";
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "cpu-x86";
+			reg = <0>;
+			intel,apic-id = <0>;
+		};
+	};
+
 	pci {
 		compatible = "pci-x86";
 		#address-cells = <3>;
diff --git a/arch/x86/dts/qemu-x86_q35.dts b/arch/x86/dts/qemu-x86_q35.dts
index 5fbabc2f3c..2e785fa4bf 100644
--- a/arch/x86/dts/qemu-x86_q35.dts
+++ b/arch/x86/dts/qemu-x86_q35.dts
@@ -35,6 +35,18 @@
 		stdout-path = "/serial";
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "cpu-x86";
+			reg = <0>;
+			intel,apic-id = <0>;
+		};
+	};
+
 	pci {
 		compatible = "pci-x86";
 		#address-cells = <3>;
diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig
index a4c20bd4f1..4b18d51738 100644
--- a/configs/qemu-x86_defconfig
+++ b/configs/qemu-x86_defconfig
@@ -1,6 +1,8 @@
 CONFIG_X86=y
 CONFIG_DEFAULT_DEVICE_TREE="qemu-x86_i440fx"
 CONFIG_GENERATE_PIRQ_TABLE=y
+CONFIG_GENERATE_MP_TABLE=y
+CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
@@ -9,6 +11,7 @@ CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_CMD_BOOTSTAGE=y
 CONFIG_OF_CONTROL=y
+CONFIG_CPU=y
 CONFIG_SPI_FLASH=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y