From: Fabio Estevam Date: Mon, 6 Apr 2015 14:23:07 +0000 (-0300) Subject: mx53loco: Disable printing cpuinfo X-Git-Tag: v2015.04~2^2~3 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=a80a65e99745c3c2138716d2a1c58096e8e71697;p=oweals%2Fu-boot.git mx53loco: Disable printing cpuinfo Since commit 32df39c741788e ("mx5: fix get_reset_cause") we have the following boot messages on a mx53qsb: U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39) CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: POR Board: MX53 LOCO I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial CPU: Freescale i.MX53 rev2.1 at 1000 MHz Reset cause: unknown reset Net: FEC [PRIME] The CPU and Reset cause lines appear twice. Initially mx53 boots at 800MHz, then at a later point the PMIC is configured via I2C to raise the CPU voltage so that it can run at 1GHz. To avoid such misleading double printings, disable printing cpu info for now. Signed-off-by: Fabio Estevam Acked-by: Jason Liu --- diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 9ece6ecd8b..1298788624 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -389,7 +389,6 @@ int board_late_init(void) { if (!power_init()) clock_1GHz(); - print_cpuinfo(); return 0; } diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 8f92234471..3551e02276 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -24,8 +24,6 @@ #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DISPLAY_CPUINFO - /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)