From: Chen-Yu Tsai Date: Tue, 9 Dec 2014 08:56:53 +0000 (+0800) Subject: sun6i: Add new board Merrii Hummingbird A31 X-Git-Tag: v2015.04-rc1~186 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=a805b7e5da479a21fdac666237a11687de21b5e6;p=oweals%2Fu-boot.git sun6i: Add new board Merrii Hummingbird A31 The Merrii Hummingbird A31 is a A31 based development board with 1G RAM, 8G NAND, AP6210 WiFi+BT, gigabit ethernet, USB OTG, 2 USB 2.0 ports connected to a USB hub chip, HDMI, VGA, TV and stereo in/out. Signed-off-by: Chen-Yu Tsai Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index f7da7042f4..88f09fb349 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -111,6 +111,10 @@ config TARGET_CUBIETRUCK bool "CUBIETRUCK" depends on MACH_SUN7I +config TARGET_HUMMINGBIRD_A31 + bool "HUMMINGBIRD_A31" + depends on MACH_SUN6I + config TARGET_IPPO_Q8H_V5 bool "IPPO_Q8H_V5" depends on MACH_SUN8I diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 013d485135..1a1814c33b 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -55,6 +55,11 @@ M: Maxime Ripard S: Maintained F: configs/Colombus_defconfig +HUMMINIGBIRD-A31 BOARD +M: Chen-Yu Tsai +S: Maintained +F: configs/Hummingbird_A31_defconfig + IPPO-Q8H-V5 BOARD M: Chen-Yu Tsai S: Maintained diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig new file mode 100644 index 0000000000..b60d579e4b --- /dev/null +++ b/configs/Hummingbird_A31_defconfig @@ -0,0 +1,19 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" +CONFIG_FDTFILE="sun6i-a31-hummingbird.dtb" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN6I=y ++S:CONFIG_TARGET_HUMMINGBIRD_A31=y ++S:CONFIG_DRAM_CLK=312 ++S:CONFIG_DRAM_ZQ=251 +# Wifi power ++S:CONFIG_AXP221_ALDO1_VOLT=3300 +# PM-CPUS GPIO power ++S:CONFIG_AXP221_ALDO2_VOLT=1800 +# SoC IR, PLL and Analog power (must be 3.0V) ++S:CONFIG_AXP221_ALDO3_VOLT=3000 +# Vbus gpio for usb1 ++S:CONFIG_USB1_VBUS_PIN="PH24" +# No Vbus gpio for usb2 ++S:CONFIG_USB2_VBUS_PIN=""