From: Stephen Warren Date: Fri, 23 May 2014 19:24:47 +0000 (-0600) Subject: cmd_mmc: make mmc dev always re-probe the HW X-Git-Tag: v2014.07-rc4~67^2~1 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=a5710920b7b0016c6d83897d251b44922f5ca832;p=oweals%2Fu-boot.git cmd_mmc: make mmc dev always re-probe the HW Currently, U-Boot behaves as follows: - Begin with no SD card inserted in "mmc 1" - Execute: mmc dev 1 - This fails, since there is no card - User plugs in an SD card - Execute: mmc dev 1 - This still fails, since the HW isn't reprobed. With this change, U-Boot behaves as follows: - Begin with no SD card inserted in "mmc 1" - Execute: mmc dev 1 - This fails, since there is no card - User plugs in an SD card - Execute: mmc dev 1 - The newly present SD card is detected I know that "mmc rescan" will force the HW to be reprobed, but I feel it makes more sense if "mmc dev" always reprobes the HW after selecting the current MMC device. This allows scripts to just execute "mmc dev", and not have to also execute "mmc rescan" to check for media presense. Signed-off-by: Stephen Warren Acked-by: Pantelis Antoniou --- diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 6c8db2e78c..1e40983c75 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -418,7 +418,7 @@ static int do_mmc_dev(cmd_tbl_t *cmdtp, int flag, return CMD_RET_USAGE; } - mmc = init_mmc_device(dev, false); + mmc = init_mmc_device(dev, true); if (!mmc) return CMD_RET_FAILURE;