From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Thu, 26 Apr 2018 12:51:31 +0000 (+0530)
Subject: arm: v7R: Add support for enabling caches
X-Git-Tag: v2018.07-rc1~231
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=a43d46a73cb2c40481791cb292b8eb0b5a80d55e;p=oweals%2Fu-boot.git

arm: v7R: Add support for enabling caches

Cache maintenance procedure is same for v7A and v7R
processors. So re-use cache-cp15.c file except for
mmu parts.

Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

diff --git a/arch/arm/cpu/armv7/mpu_v7r.c b/arch/arm/cpu/armv7/mpu_v7r.c
index 567d913414..7adecffff8 100644
--- a/arch/arm/cpu/armv7/mpu_v7r.c
+++ b/arch/arm/cpu/armv7/mpu_v7r.c
@@ -106,3 +106,14 @@ void setup_mpu_regions(struct mpu_region_config *rgns, u32 num_rgns)
 
 	icache_enable();
 }
+
+void enable_caches(void)
+{
+	/*
+	 * setup_mpu_regions() might have enabled Icache. So add a check
+	 * before enabling Icache
+	 */
+	if (!icache_status())
+		icache_enable();
+	dcache_enable();
+}
diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c
index febb253f83..0688f1e6a6 100644
--- a/arch/arm/lib/cache-cp15.c
+++ b/arch/arm/lib/cache-cp15.c
@@ -8,11 +8,13 @@
 #include <asm/system.h>
 #include <asm/cache.h>
 #include <linux/compiler.h>
+#include <asm/armv7_mpu.h>
 
 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_SYS_ARM_MMU
 __weak void arm_init_before_mmu(void)
 {
 }
@@ -201,15 +203,23 @@ static int mmu_enabled(void)
 {
 	return get_cr() & CR_M;
 }
+#endif /* CONFIG_SYS_ARM_MMU */
 
 /* cache_bit must be either CR_I or CR_C */
 static void cache_enable(uint32_t cache_bit)
 {
 	uint32_t reg;
 
-	/* The data cache is not active unless the mmu is enabled too */
+	/* The data cache is not active unless the mmu/mpu is enabled too */
+#ifdef CONFIG_SYS_ARM_MMU
 	if ((cache_bit == CR_C) && !mmu_enabled())
 		mmu_setup();
+#elif defined(CONFIG_SYS_ARM_MPU)
+	if ((cache_bit == CR_C) && !mpu_enabled()) {
+		printf("Consider enabling MPU before enabling caches\n");
+		return;
+	}
+#endif
 	reg = get_cr();	/* get control reg. */
 	set_cr(reg | cache_bit);
 }