From: Henryk Heisig Date: Tue, 6 Feb 2018 21:08:28 +0000 (+0100) Subject: ar71xx: add support for TP-Link RE355 X-Git-Tag: v18.06.0-rc1~1015 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=a338491a306798868738fd8210b27bd2a4ab0daa;p=oweals%2Fopenwrt.git ar71xx: add support for TP-Link RE355 This device is identical as TP-Link RE450 RE355 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9558+QCA9880. Specification: 720/600/200 MHz (CPU/DDR/AHB) 64/128 MB of RAM (DDR2) 8 MB of FLASH (SPI NOR) 3T3R 2.4 GHz 3T3R 5 GHz 1x 10/100/1000 Mbps Ethernet 7x LED, 3x button UART header on PCB Flash instruction: Web: Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Signed-off-by: Henryk Heisig --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index a3154db7ed..c45376f9e4 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -616,6 +616,7 @@ rb-wap-2nd) ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000" ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" ;; +re355|\ re450) ucidef_set_led_netdev "lan_data" "LAN Data" "$board:green:lan_data" "eth0" "tx rx" ucidef_set_led_netdev "lan_link" "LAN Link" "$board:green:lan_link" "eth0" "link" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 435d413c63..b208f38b5e 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -107,6 +107,7 @@ ar71xx_setup_interfaces() rb-sxt5n|\ rb-wap-2nd|\ rb-wapg-5hact2hnd|\ + re355|\ re450|\ rocket-m-xw|\ sc300m |\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 2e9fd1d637..3b5fc32298 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -359,6 +359,7 @@ get_status_led() { rb-sxt5n) status_led="rb:green:power" ;; + re355|\ re450|\ sc300m) status_led="$board:blue:power" diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index ca90563d25..8284550e92 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -106,6 +106,7 @@ case "$FIRMWARE" in rb-wapg-5hact2hnd) ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116 ;; + re355|\ re450|\ tl-wr902ac-v1) ath10kcal_extract "art" 20480 2116 diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 267c575545..7c7a0e2674 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -871,6 +871,9 @@ ar71xx_board_detect() { *"Rambutan"*) name="rambutan" ;; + *"RE355") + name="re355" + ;; *"RE450") name="re450" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 21e387389d..946a886071 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -390,6 +390,7 @@ platform_check_image() { omy-x1|\ onion-omega|\ oolite|\ + re355|\ re450|\ rut900|\ smart-300|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index a952476f18..447ab01dae 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -168,6 +168,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_RB95X is not set # CONFIG_ATH79_MACH_RBSPI is not set # CONFIG_ATH79_MACH_RBSXTLITE is not set +# CONFIG_ATH79_MACH_RE355 is not set # CONFIG_ATH79_MACH_RE450 is not set # CONFIG_ATH79_MACH_RUT9XX is not set # CONFIG_ATH79_MACH_RW2458N is not set diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index d0cfa462bf..e5fce99b19 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -166,6 +166,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_RB95X is not set # CONFIG_ATH79_MACH_RBSPI is not set # CONFIG_ATH79_MACH_RBSXTLITE is not set +# CONFIG_ATH79_MACH_RE355 is not set # CONFIG_ATH79_MACH_RE450 is not set # CONFIG_ATH79_MACH_RUT9XX is not set # CONFIG_ATH79_MACH_RW2458N is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 20eb210105..eda1e4002b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1305,6 +1305,16 @@ config ATH79_MACH_MZK_W300NH select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_RE355 + bool "TP-LINK RE355 board support" + select SOC_QCA955X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_RE450 bool "TP-LINK RE450 board support" select SOC_QCA955X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 9be721ac20..27ef57d167 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -177,6 +177,7 @@ obj-$(CONFIG_ATH79_MACH_RB941) += mach-rb941.o obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o obj-$(CONFIG_ATH79_MACH_RBSPI) += mach-rbspi.o obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o +obj-$(CONFIG_ATH79_MACH_RE355) += mach-re450.o obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o obj-$(CONFIG_ATH79_MACH_RUT9XX) += mach-rut9xx.o obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c index 25de6e729f..991aa1c9a9 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c @@ -1,9 +1,10 @@ /* - * TP-LINK Archer RE450 board support + * TP-LINK RE355/RE450 board support * * Copyright (c) 2013 Gabor Juhos * Copyright (c) 2016 Tal Keren - * + * Copyright (c) 2018 Henryk Heisig + * * Based on the Qualcomm Atheros AP135/AP136 reference board support code * Copyright (c) 2012 Qualcomm Atheros * @@ -72,6 +73,42 @@ static struct flash_platform_data tl_re450_flash_data = { .part_probes = tl_re450_part_probes, }; +static struct gpio_led re355_leds_gpio[] __initdata = { + { + .name = "re355:blue:power", + .gpio = RE450_GPIO_LED_SYSTEM, + .active_low = 1, + }, + { + .name = "re355:blue:wlan2g", + .gpio = RE450_GPIO_LED_WLAN2G, + .active_low = 1, + }, + { + .name = "re355:blue:wlan5g", + .gpio = RE450_GPIO_LED_WLAN5G, + .active_low = 1, + }, + { + .name = "re355:blue:wps", + .gpio = RE450_GPIO_LED_JUMPSTART, + }, + { + .name = "re355:red:wps", + .gpio = RE450_GPIO_LED_JUMPSTART_RED, + }, + { + .name = "re355:green:lan_data", + .gpio = RE450_GPIO_LED_LAN_DATA, + .active_low = 1, + }, + { + .name = "re355:green:lan_link", + .gpio = RE450_GPIO_LED_LAN_LINK, + .active_low = 1, + }, +}; + static struct gpio_led re450_leds_gpio[] __initdata = { { .name = "re450:blue:power", @@ -149,15 +186,13 @@ static struct platform_device re450_phy_device = { }, }; -static void __init re450_setup(void) +static void __init rex5x_setup(void) { u8 *mac = (u8 *) KSEG1ADDR(0x1f610008); u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); u8 tmpmac[ETH_ALEN]; ath79_register_m25p80(&tl_re450_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(re450_leds_gpio), - re450_leds_gpio); ath79_register_gpio_keys_polled(-1, RE450_KEYS_POLL_INTERVAL, ARRAY_SIZE(re450_gpio_keys), re450_gpio_keys); @@ -183,5 +218,22 @@ static void __init re450_setup(void) ath79_register_eth(0); } +static void __init re355_setup(void) +{ + rex5x_setup(); + ath79_register_leds_gpio(-1, ARRAY_SIZE(re355_leds_gpio), + re355_leds_gpio); +} + +MIPS_MACHINE(ATH79_MACH_RE355, "RE355", "TP-LINK RE355", + re355_setup) + +static void __init re450_setup(void) +{ + rex5x_setup(); + ath79_register_leds_gpio(-1, ARRAY_SIZE(re450_leds_gpio), + re450_leds_gpio); +} + MIPS_MACHINE(ATH79_MACH_RE450, "RE450", "TP-LINK RE450", re450_setup) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 7434f340af..27269e54d6 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -207,6 +207,7 @@ enum ath79_mach_type { ATH79_MACH_RB_WAPAC, /* Mikrotik RouterBOARD wAPG-5HacT2HnD */ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ + ATH79_MACH_RE355, /* TP-LINK RE355 */ ATH79_MACH_RE450, /* TP-LINK RE450 */ ATH79_MACH_RUT9XX, /* Teltonika RUT900 series */ ATH79_MACH_RW2458N, /* Redwave RW2458N */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index 42df64d780..892d33dc8c 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -125,6 +125,7 @@ CONFIG_ATH79_MACH_PQI_AIR_PEN=y CONFIG_ATH79_MACH_QIHOO_C301=y CONFIG_ATH79_MACH_R36A=y CONFIG_ATH79_MACH_R602N=y +CONFIG_ATH79_MACH_RE355=y CONFIG_ATH79_MACH_RE450=y CONFIG_ATH79_MACH_RUT9XX=y CONFIG_ATH79_MACH_RW2458N=y diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk index b0d99e2599..48eed6b15b 100644 --- a/target/linux/ar71xx/image/generic-tp-link.mk +++ b/target/linux/ar71xx/image/generic-tp-link.mk @@ -184,6 +184,25 @@ define Device/eap120-v1 endef TARGET_DEVICES += eap120-v1 +define Device/re355-v1 + DEVICE_TITLE := TP-LINK RE355 v1 + DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x + MTDPARTS := spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro + IMAGE_SIZE := 7936k + BOARDNAME := RE355 + TPLINK_BOARD_ID := RE355 + DEVICE_PROFILE := RE355 + LOADER_TYPE := elf + TPLINK_HWID := 0x0 + TPLINK_HWREV := 0 + TPLINK_HEADER_VERSION := 1 + KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade + IMAGE/factory.bin := append-rootfs | tplink-safeloader factory +endef +TARGET_DEVICES += re355-v1 + define Device/re450-v1 DEVICE_TITLE := TP-LINK RE450 v1 DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 88e2e88bdf..c96edb4609 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -871,6 +871,49 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system" }, + /** Firmware layout for the RE355 */ + { + .id = "RE355", + .vendor = "", + .support_list = + "SupportList:\r\n" + "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n" + "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n" + "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n" + "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n" + "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n" + "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n" + "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n" + "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n", + .support_trail = '\x00', + .soft_ver = NULL, + + /** + The flash partition table for RE355; + it is almost the same as the one used by the stock images, + 576KB were moved from file-system to os-image. + */ + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"os-image", 0x20000, 0x180000}, + {"file-system", 0x1a0000, 0x460000}, + {"partition-table", 0x600000, 0x02000}, + {"default-mac", 0x610000, 0x00020}, + {"pin", 0x610100, 0x00020}, + {"product-info", 0x611100, 0x01000}, + {"soft-version", 0x620000, 0x01000}, + {"support-list", 0x621000, 0x01000}, + {"profile", 0x622000, 0x08000}, + {"user-config", 0x630000, 0x10000}, + {"default-config", 0x640000, 0x10000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system" + }, + /** Firmware layout for the RE450 */ { .id = "RE450",