From: Bin Meng Date: Sat, 6 Feb 2016 03:30:11 +0000 (-0800) Subject: Use correct spelling of "U-Boot" X-Git-Tag: v2016.03-rc2~92^2~10 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=a187559e3d586891c917279044c5386d1b2adc6e;p=oweals%2Fu-boot.git Use correct spelling of "U-Boot" Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng Reviewed-by: Heiko Schocher Reviewed-by: Simon Glass Reviewed-by: Minkyu Kang --- diff --git a/README b/README index c7c9e0a9e3..83d2874851 100644 --- a/README +++ b/README @@ -460,7 +460,7 @@ The following options need to be configured: CONFIG_SYS_CPC_REINIT_F This CONFIG is defined when the CPC is configured as SRAM at the - time of U-boot entry and is required to be re-initialized. + time of U-Boot entry and is required to be re-initialized. CONFIG_DEEP_SLEEP Indicates this SoC supports deep sleep feature. If deep sleep is @@ -2963,7 +2963,7 @@ CBFS (Coreboot Filesystem) support - Parallel Flash support: CONFIG_SYS_NO_FLASH - Traditionally U-boot was run on systems with parallel NOR + Traditionally U-Boot was run on systems with parallel NOR flash. This option is used to disable support for parallel NOR flash. This option should be defined if the board does not have parallel flash. diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c index bee9318f5a..085649e712 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c +++ b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c @@ -46,7 +46,7 @@ void reset_cpu(ulong addr) int arch_cpu_init(void) { /* - * It might be necessary to flush data cache, if U-boot is loaded + * It might be necessary to flush data cache, if U-Boot is loaded * from kickstart bootloader, e.g. from S1L loader */ flush_dcache_all(); diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S b/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S index 4b8053e3f9..b21abc3752 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S +++ b/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S @@ -41,5 +41,5 @@ lowlevel_init: orr r0, #0x00000004 str r0, [r1] - /* Return to U-boot via saved link register */ + /* Return to U-Boot via saved link register */ mov pc, lr diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S index 31d1c9e348..b7563edbe6 100644 --- a/arch/arm/cpu/armv7/nonsec_virt.S +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -37,7 +37,7 @@ _monitor_vectors: /* * secure monitor handler - * U-boot calls this "software interrupt" in start.S + * U-Boot calls this "software interrupt" in start.S * This is executed on a "smc" instruction, we use a "smc #0" to switch * to non-secure state. * r0, r1, r2: passed to the callee diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 4cd84b0311..3d19bbfbe2 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -1,6 +1,6 @@ if ARM64 config ARMV8_MULTIENTRY - boolean "Enable multiple CPUs to enter into U-boot" + boolean "Enable multiple CPUs to enter into U-Boot" endif diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts index 469bd05e16..f62916da39 100644 --- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts @@ -59,7 +59,7 @@ status = "okay"; }; -/* for U-boot only */ +/* for U-Boot only */ / { soc { u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts index e0a972f4d2..dca408bb70 100644 --- a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts @@ -61,7 +61,7 @@ status = "okay"; }; -/* for U-boot only */ +/* for U-Boot only */ / { soc { u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts index 02e74a7c3b..202a642a4d 100644 --- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts @@ -66,7 +66,7 @@ status = "okay"; }; -/* for U-boot only */ +/* for U-Boot only */ / { soc { u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts index d46e827280..02a3362e74 100644 --- a/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts +++ b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts @@ -47,7 +47,7 @@ status = "okay"; }; -/* for U-boot only */ +/* for U-Boot only */ / { soc { u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/dts/uniphier-ph1-sld3-ref.dts index 1f3aee928a..ff17945e90 100644 --- a/arch/arm/dts/uniphier-ph1-sld3-ref.dts +++ b/arch/arm/dts/uniphier-ph1-sld3-ref.dts @@ -68,7 +68,7 @@ status = "okay"; }; -/* for U-boot only */ +/* for U-Boot only */ &serial0 { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts index b58bf075ac..b5b6f65d36 100644 --- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts @@ -63,7 +63,7 @@ status = "okay"; }; -/* for U-boot only */ +/* for U-Boot only */ / { soc { u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/uniphier-proxstream2-gentil.dts b/arch/arm/dts/uniphier-proxstream2-gentil.dts index a49215edae..c6c133aa19 100644 --- a/arch/arm/dts/uniphier-proxstream2-gentil.dts +++ b/arch/arm/dts/uniphier-proxstream2-gentil.dts @@ -49,7 +49,7 @@ status = "okay"; }; -/* for U-boot only */ +/* for U-Boot only */ / { soc { u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/uniphier-proxstream2-vodka.dts b/arch/arm/dts/uniphier-proxstream2-vodka.dts index 63bd3633bd..3703ad36a5 100644 --- a/arch/arm/dts/uniphier-proxstream2-vodka.dts +++ b/arch/arm/dts/uniphier-proxstream2-vodka.dts @@ -45,7 +45,7 @@ status = "okay"; }; -/* for U-boot only */ +/* for U-Boot only */ / { soc { u-boot,dm-pre-reloc; diff --git a/arch/arm/mach-exynos/include/mach/spl.h b/arch/arm/mach-exynos/include/mach/spl.h index 0c480acb1a..a5d13fa7cb 100644 --- a/arch/arm/mach-exynos/include/mach/spl.h +++ b/arch/arm/mach-exynos/include/mach/spl.h @@ -42,10 +42,10 @@ struct spl_machine_param { u32 mem_iv_size; /* Memory channel interleaving size */ enum ddr_mode mem_type; /* Type of on-board memory */ /* - * U-boot size - The iROM mmc copy function used by the SPL takes a - * block count paramter to describe the u-boot size unlike the spi - * boot copy function which just uses the u-boot size directly. Align - * the u-boot size to block size (512 bytes) when populating the SPL + * U-Boot size - The iROM mmc copy function used by the SPL takes a + * block count paramter to describe the U-Boot size unlike the spi + * boot copy function which just uses the U-Boot size directly. Align + * the U-Boot size to block size (512 bytes) when populating the SPL * table only for mmc boot. */ u32 uboot_size; diff --git a/arch/arm/mach-exynos/sec_boot.S b/arch/arm/mach-exynos/sec_boot.S index dfc3455929..5dc216dce1 100644 --- a/arch/arm/mach-exynos/sec_boot.S +++ b/arch/arm/mach-exynos/sec_boot.S @@ -30,10 +30,10 @@ relocate_wait_code: * because that comes out to be the last 4KB of the iRAM * (Base Address - 0x02020000, Limit Address - 0x020740000). * - * U-boot and kernel are aware of this code and flags by the simple + * U-Boot and kernel are aware of this code and flags by the simple * fact that we are implementing a workaround in the last 4KB * of the iRAM and we have already defined these flag and address - * values in both kernel and U-boot for our use. + * values in both kernel and U-Boot for our use. */ code_base: b 1f diff --git a/arch/arm/mach-exynos/spl_boot.c b/arch/arm/mach-exynos/spl_boot.c index c7f943eb6a..7df01021cd 100644 --- a/arch/arm/mach-exynos/spl_boot.c +++ b/arch/arm/mach-exynos/spl_boot.c @@ -177,7 +177,7 @@ static void exynos_spi_copy(unsigned int uboot_size, unsigned int uboot_addr) #endif /* -* Copy U-boot from mmc to RAM: +* Copy U-Boot from mmc to RAM: * COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains * Pointer to API (Data transfer from mmc to ram) */ diff --git a/arch/arm/mach-orion5x/lowlevel_init.S b/arch/arm/mach-orion5x/lowlevel_init.S index 51a8b3c51b..3f38f36ff2 100644 --- a/arch/arm/mach-orion5x/lowlevel_init.S +++ b/arch/arm/mach-orion5x/lowlevel_init.S @@ -283,5 +283,5 @@ lowlevel_init: #endif /* CONFIG_SPL_BUILD */ - /* Return to U-boot via saved link register */ + /* Return to U-Boot via saved link register */ mov pc, lr diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile index 7cd0bbf24e..7ba5f1b848 100644 --- a/arch/blackfin/cpu/Makefile +++ b/arch/blackfin/cpu/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c index 91aa5cc89c..529322a174 100644 --- a/arch/blackfin/cpu/cpu.c +++ b/arch/blackfin/cpu/cpu.c @@ -1,5 +1,5 @@ /* - * U-boot - cpu.c CPU specific functions + * U-Boot - cpu.c CPU specific functions * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/arch/blackfin/cpu/cpu.h b/arch/blackfin/cpu/cpu.h index f6aa1b6539..a5fe02e53c 100644 --- a/arch/blackfin/cpu/cpu.h +++ b/arch/blackfin/cpu/cpu.h @@ -1,5 +1,5 @@ /* - * U-boot - cpu.h + * U-Boot - cpu.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/cpu/interrupts.c b/arch/blackfin/cpu/interrupts.c index 9189816699..45c92c3d3e 100644 --- a/arch/blackfin/cpu/interrupts.c +++ b/arch/blackfin/cpu/interrupts.c @@ -1,5 +1,5 @@ /* - * U-boot - interrupts.c Interrupt related routines + * U-Boot - interrupts.c Interrupt related routines * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S index f31abfacf2..823a1dfde8 100644 --- a/arch/blackfin/cpu/start.S +++ b/arch/blackfin/cpu/start.S @@ -1,5 +1,5 @@ /* - * U-boot - start.S Startup file for Blackfin u-boot + * U-Boot - start.S Startup file for Blackfin U-Boot * * Copyright (c) 2005-2008 Analog Devices Inc. * @@ -51,7 +51,7 @@ ENTRY(_start) #ifdef CONFIG_HW_WATCHDOG /* Program the watchdog with default timeout of ~5 seconds. * That should be long enough to bootstrap ourselves up and - * then the common u-boot code can take over. + * then the common U-Boot code can take over. */ r1 = WDDIS; # ifdef __ADSPBF60x__ diff --git a/arch/blackfin/cpu/traps.c b/arch/blackfin/cpu/traps.c index 10f72f8246..21760d01a7 100644 --- a/arch/blackfin/cpu/traps.c +++ b/arch/blackfin/cpu/traps.c @@ -1,5 +1,5 @@ /* - * U-boot - traps.c Routines related to interrupts and exceptions + * U-Boot - traps.c Routines related to interrupts and exceptions * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/arch/blackfin/cpu/u-boot.lds b/arch/blackfin/cpu/u-boot.lds index ae1b813c1f..f407fb2327 100644 --- a/arch/blackfin/cpu/u-boot.lds +++ b/arch/blackfin/cpu/u-boot.lds @@ -1,5 +1,5 @@ /* - * U-boot - u-boot.lds.S + * U-Boot - u-boot.lds.S * * Copyright (c) 2005-2010 Analog Device Inc. * diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 6cde6dbfde..a1462bdecc 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -1,5 +1,5 @@ /* - * U-boot - bitops.h Routines for bit operations + * U-Boot - bitops.h Routines for bit operations * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h index 868c82ea7d..00556de284 100644 --- a/arch/blackfin/include/asm/blackfin_local.h +++ b/arch/blackfin/include/asm/blackfin_local.h @@ -1,5 +1,5 @@ /* - * U-boot - blackfin_local.h + * U-Boot - blackfin_local.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h index 98fb7bf744..593ba5a4cf 100644 --- a/arch/blackfin/include/asm/byteorder.h +++ b/arch/blackfin/include/asm/byteorder.h @@ -1,5 +1,5 @@ /* - * U-boot - byteorder.h + * U-Boot - byteorder.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/deferred.h b/arch/blackfin/include/asm/deferred.h index 82ceda3e4d..e75d7e80ad 100644 --- a/arch/blackfin/include/asm/deferred.h +++ b/arch/blackfin/include/asm/deferred.h @@ -1,5 +1,5 @@ /* - * U-boot - deferred register layout + * U-Boot - deferred register layout * * Copyright 2004-2009 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h index f146efd6e7..06c3edd03e 100644 --- a/arch/blackfin/include/asm/delay.h +++ b/arch/blackfin/include/asm/delay.h @@ -1,5 +1,5 @@ /* - * U-boot - delay.h Routines for introducing delays + * U-Boot - delay.h Routines for introducing delays * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h index 7aefead402..69a6971dd0 100644 --- a/arch/blackfin/include/asm/global_data.h +++ b/arch/blackfin/include/asm/global_data.h @@ -1,5 +1,5 @@ /* - * U-boot - global_data.h Declarations for global data of u-boot + * U-Boot - global_data.h Declarations for global data of U-Boot * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index aadb0d2d4e..d3337e4fac 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -1,5 +1,5 @@ /* - * U-boot - io.h IO routines + * U-Boot - io.h IO routines * * Copyright 2004-2009 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/linkage.h b/arch/blackfin/include/asm/linkage.h index 7e06bc7123..60d5317797 100644 --- a/arch/blackfin/include/asm/linkage.h +++ b/arch/blackfin/include/asm/linkage.h @@ -1,5 +1,5 @@ /* - * U-boot - linkage.h + * U-Boot - linkage.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/asm/posix_types.h index 18be579d26..8535235031 100644 --- a/arch/blackfin/include/asm/posix_types.h +++ b/arch/blackfin/include/asm/posix_types.h @@ -1,5 +1,5 @@ /* - * U-boot - posix_types.h + * U-Boot - posix_types.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index b79800672e..1daf59bc87 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -1,5 +1,5 @@ /* - * U-boot - processor.h + * U-Boot - processor.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/shared_resources.h b/arch/blackfin/include/asm/shared_resources.h index 1a03392632..42dab9f126 100644 --- a/arch/blackfin/include/asm/shared_resources.h +++ b/arch/blackfin/include/asm/shared_resources.h @@ -1,5 +1,5 @@ /* - * U-boot - setup.h + * U-Boot - setup.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/soft_switch.h b/arch/blackfin/include/asm/soft_switch.h index ff8e44d8be..321b070825 100644 --- a/arch/blackfin/include/asm/soft_switch.h +++ b/arch/blackfin/include/asm/soft_switch.h @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2012 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/string.h b/arch/blackfin/include/asm/string.h index aea4e29c9d..15f50f23cb 100644 --- a/arch/blackfin/include/asm/string.h +++ b/arch/blackfin/include/asm/string.h @@ -1,5 +1,5 @@ /* - * U-boot - string.h String functions + * U-Boot - string.h String functions * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index 5a7e8edb6d..f0c4ae2609 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -1,5 +1,5 @@ /* - * U-boot - system.h + * U-Boot - system.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/types.h b/arch/blackfin/include/asm/types.h index 92124f1823..4da64c450e 100644 --- a/arch/blackfin/include/asm/types.h +++ b/arch/blackfin/include/asm/types.h @@ -1,5 +1,5 @@ /* - * U-boot - types.h + * U-Boot - types.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/include/asm/u-boot.h b/arch/blackfin/include/asm/u-boot.h index 7b5cf6a1b6..1ada44edcd 100644 --- a/arch/blackfin/include/asm/u-boot.h +++ b/arch/blackfin/include/asm/u-boot.h @@ -1,5 +1,5 @@ /* - * U-boot - u-boot.h Structure declarations for board specific data + * U-Boot - u-boot.h Structure declarations for board specific data * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile index b534a98c9c..de02c69dd2 100644 --- a/arch/blackfin/lib/Makefile +++ b/arch/blackfin/lib/Makefile @@ -1,5 +1,5 @@ # -# U-boot Makefile +# U-Boot Makefile # # Copyright (c) 2005-2008 Analog Devices Inc. # diff --git a/arch/blackfin/lib/boot.c b/arch/blackfin/lib/boot.c index 5644d589e7..fd4c82e9c8 100644 --- a/arch/blackfin/lib/boot.c +++ b/arch/blackfin/lib/boot.c @@ -1,5 +1,5 @@ /* - * U-boot - boot.c - misc boot helper functions + * U-Boot - boot.c - misc boot helper functions * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/arch/blackfin/lib/cache.c b/arch/blackfin/lib/cache.c index e8a0cb5deb..8d933393b4 100644 --- a/arch/blackfin/lib/cache.c +++ b/arch/blackfin/lib/cache.c @@ -1,5 +1,5 @@ /* - * U-boot - cache.c + * U-Boot - cache.c * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/arch/blackfin/lib/cmd_cache_dump.c b/arch/blackfin/lib/cmd_cache_dump.c index f9f909791e..a4c799acb3 100644 --- a/arch/blackfin/lib/cmd_cache_dump.c +++ b/arch/blackfin/lib/cmd_cache_dump.c @@ -1,5 +1,5 @@ /* - * U-boot - cmd_cache_dump.c + * U-Boot - cmd_cache_dump.c * * Copyright (c) 2007-2008 Analog Devices Inc. * diff --git a/arch/blackfin/lib/kgdb.c b/arch/blackfin/lib/kgdb.c index 4ca3fc7312..2a7c0727f5 100644 --- a/arch/blackfin/lib/kgdb.c +++ b/arch/blackfin/lib/kgdb.c @@ -1,5 +1,5 @@ /* - * U-boot - architecture specific kgdb code + * U-Boot - architecture specific kgdb code * * Copyright 2009 Analog Devices Inc. * diff --git a/arch/blackfin/lib/muldi3.c b/arch/blackfin/lib/muldi3.c index 65f55238f4..9f6f60d05f 100644 --- a/arch/blackfin/lib/muldi3.c +++ b/arch/blackfin/lib/muldi3.c @@ -1,5 +1,5 @@ /* - * U-boot - muldi3.c contains routines for mult and div + * U-Boot - muldi3.c contains routines for mult and div * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/blackfin/lib/sections.c b/arch/blackfin/lib/sections.c index b50f30aa45..86fc4df061 100644 --- a/arch/blackfin/lib/sections.c +++ b/arch/blackfin/lib/sections.c @@ -1,5 +1,5 @@ /* - * U-boot - section.c + * U-Boot - section.c * * Copyright (c) 2014 Analog Devices Inc. * diff --git a/arch/blackfin/lib/string.c b/arch/blackfin/lib/string.c index 211df7b430..c904a88916 100644 --- a/arch/blackfin/lib/string.c +++ b/arch/blackfin/lib/string.c @@ -1,5 +1,5 @@ /* - * U-boot - string.c Contains library routines. + * U-Boot - string.c Contains library routines. * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/arch/microblaze/lib/muldi3.c b/arch/microblaze/lib/muldi3.c index 5c1a1541c8..95b6b3282b 100644 --- a/arch/microblaze/lib/muldi3.c +++ b/arch/microblaze/lib/muldi3.c @@ -1,5 +1,5 @@ /* - * U-boot - muldi3.c contains routines for mult and div + * U-Boot - muldi3.c contains routines for mult and div * * * SPDX-License-Identifier: GPL-2.0+ diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S index d2c31ae781..1b56ca350a 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/start.S @@ -57,7 +57,7 @@ .set noreorder ENTRY(_start) - /* U-boot entry point */ + /* U-Boot entry point */ b reset nop diff --git a/arch/nds32/include/asm/linkage.h b/arch/nds32/include/asm/linkage.h index 7e06bc7123..60d5317797 100644 --- a/arch/nds32/include/asm/linkage.h +++ b/arch/nds32/include/asm/linkage.h @@ -1,5 +1,5 @@ /* - * U-boot - linkage.h + * U-Boot - linkage.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c index 2655974a45..577b6d9e79 100644 --- a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c @@ -12,7 +12,7 @@ /* * Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but - * U-boot only supports one SerDes controller. Therefore, we ignore bank 4 in + * U-Boot only supports one SerDes controller. Therefore, we ignore bank 4 in * this table. This works because most of the SerDes code is for errata * work-arounds, and there are no P5040 errata that effect bank 4. */ diff --git a/arch/sparc/include/asm/u-boot.h b/arch/sparc/include/asm/u-boot.h index 9b9a71d553..75ac7dc62a 100644 --- a/arch/sparc/include/asm/u-boot.h +++ b/arch/sparc/include/asm/u-boot.h @@ -13,7 +13,7 @@ /* Currently, this board information is not passed to * Linux kernel from U-Boot, but may be passed to other - * Operating systems. This is because U-boot emulates + * Operating systems. This is because U-Boot emulates * a SUN PROM loader (from Linux point of view). */ #include diff --git a/arch/sparc/include/asm/winmacro.h b/arch/sparc/include/asm/winmacro.h index 4f68fbda69..916ee9c5a3 100644 --- a/arch/sparc/include/asm/winmacro.h +++ b/arch/sparc/include/asm/winmacro.h @@ -1,5 +1,5 @@ /* - * Added to U-boot, + * Added to U-Boot, * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com * Copyright (C) 2007 * diff --git a/arch/x86/cpu/resetvec.S b/arch/x86/cpu/resetvec.S index 68a5b947d8..183275b9c2 100644 --- a/arch/x86/cpu/resetvec.S +++ b/arch/x86/cpu/resetvec.S @@ -1,5 +1,5 @@ /* - * U-boot - x86 Startup Code + * U-Boot - x86 Startup Code * * (C) Copyright 2002 * Daniel Engström, Omicron Ceti AB, diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c index f441c84df5..783be691af 100644 --- a/arch/x86/lib/bootm.c +++ b/arch/x86/lib/bootm.c @@ -162,7 +162,7 @@ int boot_linux_kernel(ulong setup_base, ulong load_address, bool image_64bit) * boot_params structure, and then jump to the kernel. We * assume that %cs is 0x10, 4GB flat, and read/execute, and * the data segments are 0x18, 4GB flat, and read/write. - * U-boot is setting them up that way for itself in + * U-Boot is setting them up that way for itself in * arch/i386/cpu/cpu.c. * * Note that we cannot currently boot a kernel while running as diff --git a/board/bct-brettl2/Makefile b/board/bct-brettl2/Makefile index 12154b625e..28fccc0dcb 100644 --- a/board/bct-brettl2/Makefile +++ b/board/bct-brettl2/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bct-brettl2/bct-brettl2.c b/board/bct-brettl2/bct-brettl2.c index bf7cd62954..adb8605bb9 100644 --- a/board/bct-brettl2/bct-brettl2.c +++ b/board/bct-brettl2/bct-brettl2.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file for BCT brettl2 + * U-Boot - main board file for BCT brettl2 * * Copyright (c) 2010 BCT Electronic GmbH * diff --git a/board/bf506f-ezkit/Makefile b/board/bf506f-ezkit/Makefile index 0f134f9ac3..7efe1bc20e 100644 --- a/board/bf506f-ezkit/Makefile +++ b/board/bf506f-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf506f-ezkit/bf506f-ezkit.c b/board/bf506f-ezkit/bf506f-ezkit.c index 638500d0c5..77e40ae15d 100644 --- a/board/bf506f-ezkit/bf506f-ezkit.c +++ b/board/bf506f-ezkit/bf506f-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2010 Analog Devices Inc. * diff --git a/board/bf518f-ezbrd/Makefile b/board/bf518f-ezbrd/Makefile index 3a6abaa63b..e9e23ed41f 100644 --- a/board/bf518f-ezbrd/Makefile +++ b/board/bf518f-ezbrd/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c index bf4a7db03d..a14e509719 100644 --- a/board/bf518f-ezbrd/bf518f-ezbrd.c +++ b/board/bf518f-ezbrd/bf518f-ezbrd.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2009 Analog Devices Inc. * diff --git a/board/bf525-ucr2/Makefile b/board/bf525-ucr2/Makefile index 8de71a1886..1be1d3117b 100644 --- a/board/bf525-ucr2/Makefile +++ b/board/bf525-ucr2/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf525-ucr2/bf525-ucr2.c b/board/bf525-ucr2/bf525-ucr2.c index 3e6df1fca8..36a725c83b 100644 --- a/board/bf525-ucr2/bf525-ucr2.c +++ b/board/bf525-ucr2/bf525-ucr2.c @@ -1,4 +1,4 @@ -/* U-boot - bf525-ucr2.c board specific routines +/* U-Boot - bf525-ucr2.c board specific routines * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. diff --git a/board/bf526-ezbrd/Makefile b/board/bf526-ezbrd/Makefile index 34ac56323a..c4882c9346 100644 --- a/board/bf526-ezbrd/Makefile +++ b/board/bf526-ezbrd/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf526-ezbrd/bf526-ezbrd.c b/board/bf526-ezbrd/bf526-ezbrd.c index db1ee283f2..a506d1baff 100644 --- a/board/bf526-ezbrd/bf526-ezbrd.c +++ b/board/bf526-ezbrd/bf526-ezbrd.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/bf527-ad7160-eval/Makefile b/board/bf527-ad7160-eval/Makefile index 9d8ecf118d..c225f7201a 100644 --- a/board/bf527-ad7160-eval/Makefile +++ b/board/bf527-ad7160-eval/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf527-ad7160-eval/bf527-ad7160-eval.c b/board/bf527-ad7160-eval/bf527-ad7160-eval.c index ea405b639d..9180630ee7 100644 --- a/board/bf527-ad7160-eval/bf527-ad7160-eval.c +++ b/board/bf527-ad7160-eval/bf527-ad7160-eval.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2010 Analog Devices Inc. * diff --git a/board/bf527-ezkit/Makefile b/board/bf527-ezkit/Makefile index cedd821b24..53ec9e7aa6 100644 --- a/board/bf527-ezkit/Makefile +++ b/board/bf527-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf527-ezkit/bf527-ezkit.c b/board/bf527-ezkit/bf527-ezkit.c index b551d4ed7e..c4f58fa3b5 100644 --- a/board/bf527-ezkit/bf527-ezkit.c +++ b/board/bf527-ezkit/bf527-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/bf527-sdp/Makefile b/board/bf527-sdp/Makefile index 1ddb026cae..77acb423a5 100644 --- a/board/bf527-sdp/Makefile +++ b/board/bf527-sdp/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf527-sdp/bf527-sdp.c b/board/bf527-sdp/bf527-sdp.c index 504869d72a..0c6094b1e4 100644 --- a/board/bf527-sdp/bf527-sdp.c +++ b/board/bf527-sdp/bf527-sdp.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2010 Analog Devices Inc. * diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile index 6838cf0451..bf7a2c4477 100644 --- a/board/bf533-ezkit/Makefile +++ b/board/bf533-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c index 81e390c93f..6879319a70 100644 --- a/board/bf533-ezkit/bf533-ezkit.c +++ b/board/bf533-ezkit/bf533-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h index fa322039f7..7822a9dfd7 100644 --- a/board/bf533-ezkit/flash-defines.h +++ b/board/bf533-ezkit/flash-defines.h @@ -1,5 +1,5 @@ /* - * U-boot - flash-defines.h + * U-Boot - flash-defines.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c index fd06b318f3..3180a76fa6 100644 --- a/board/bf533-ezkit/flash.c +++ b/board/bf533-ezkit/flash.c @@ -1,5 +1,5 @@ /* - * U-boot - flash.c Flash driver for PSD4256GV + * U-Boot - flash.c Flash driver for PSD4256GV * * Copyright (c) 2005-2007 Analog Devices Inc. * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc. diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h index 56c644262a..925669644e 100644 --- a/board/bf533-ezkit/psd4256.h +++ b/board/bf533-ezkit/psd4256.h @@ -1,5 +1,5 @@ /* - * U-boot - psd4256.h + * U-Boot - psd4256.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile index 244f9e0497..041c98e19c 100644 --- a/board/bf533-stamp/Makefile +++ b/board/bf533-stamp/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c index 585f5f14d4..eb000a6a88 100644 --- a/board/bf533-stamp/bf533-stamp.c +++ b/board/bf533-stamp/bf533-stamp.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/bf537-minotaur/Makefile b/board/bf537-minotaur/Makefile index 66d2f05f44..13ed8bfa22 100644 --- a/board/bf537-minotaur/Makefile +++ b/board/bf537-minotaur/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf537-minotaur/bf537-minotaur.c b/board/bf537-minotaur/bf537-minotaur.c index 9312216dc7..34750eca51 100644 --- a/board/bf537-minotaur/bf537-minotaur.c +++ b/board/bf537-minotaur/bf537-minotaur.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/bf537-pnav/Makefile b/board/bf537-pnav/Makefile index ffcdf1f0b0..f7af8cd5ae 100644 --- a/board/bf537-pnav/Makefile +++ b/board/bf537-pnav/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf537-pnav/bf537-pnav.c b/board/bf537-pnav/bf537-pnav.c index 6739fe1ed6..c3b06f09fc 100644 --- a/board/bf537-pnav/bf537-pnav.c +++ b/board/bf537-pnav/bf537-pnav.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/bf537-srv1/Makefile b/board/bf537-srv1/Makefile index cd0da272a6..1815fc5f8b 100644 --- a/board/bf537-srv1/Makefile +++ b/board/bf537-srv1/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf537-srv1/bf537-srv1.c b/board/bf537-srv1/bf537-srv1.c index b0ffe1aeea..fc22c07102 100644 --- a/board/bf537-srv1/bf537-srv1.c +++ b/board/bf537-srv1/bf537-srv1.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile index 234119a52a..4008e3a2d4 100644 --- a/board/bf537-stamp/Makefile +++ b/board/bf537-stamp/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index 85d41d0aaa..9b9daf4267 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/bf538f-ezkit/Makefile b/board/bf538f-ezkit/Makefile index 7c8cda05e9..eb1703e897 100644 --- a/board/bf538f-ezkit/Makefile +++ b/board/bf538f-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf538f-ezkit/bf538f-ezkit.c b/board/bf538f-ezkit/bf538f-ezkit.c index 49d30e75d0..2dd4c0c4d1 100644 --- a/board/bf538f-ezkit/bf538f-ezkit.c +++ b/board/bf538f-ezkit/bf538f-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008 Analog Devices Inc. * diff --git a/board/bf548-ezkit/Makefile b/board/bf548-ezkit/Makefile index 6f4200bd46..e4d0caaac4 100644 --- a/board/bf548-ezkit/Makefile +++ b/board/bf548-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf548-ezkit/bf548-ezkit.c b/board/bf548-ezkit/bf548-ezkit.c index cb9ee863a4..31d6eeec0c 100644 --- a/board/bf548-ezkit/bf548-ezkit.c +++ b/board/bf548-ezkit/bf548-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/bf561-acvilon/Makefile b/board/bf561-acvilon/Makefile index 48bec2884d..08e2fad61e 100644 --- a/board/bf561-acvilon/Makefile +++ b/board/bf561-acvilon/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/bf561-ezkit/Makefile b/board/bf561-ezkit/Makefile index 23c7101c20..3d534d2486 100644 --- a/board/bf561-ezkit/Makefile +++ b/board/bf561-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c index 8441838747..534c39ca89 100644 --- a/board/bf561-ezkit/bf561-ezkit.c +++ b/board/bf561-ezkit/bf561-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/bf609-ezkit/Makefile b/board/bf609-ezkit/Makefile index 3bfd0887bc..e4184ee2b6 100644 --- a/board/bf609-ezkit/Makefile +++ b/board/bf609-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c index 86da028bce..c993ca6d91 100644 --- a/board/bf609-ezkit/bf609-ezkit.c +++ b/board/bf609-ezkit/bf609-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2011 Analog Devices Inc. * diff --git a/board/bf609-ezkit/soft_switch.c b/board/bf609-ezkit/soft_switch.c index e0c8d93fe7..7c117ea997 100644 --- a/board/bf609-ezkit/soft_switch.c +++ b/board/bf609-ezkit/soft_switch.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2011 Analog Devices Inc. * diff --git a/board/bf609-ezkit/soft_switch.h b/board/bf609-ezkit/soft_switch.h index d147fe1378..75d64e279a 100644 --- a/board/bf609-ezkit/soft_switch.h +++ b/board/bf609-ezkit/soft_switch.h @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2011 Analog Devices Inc. * diff --git a/board/blackstamp/Makefile b/board/blackstamp/Makefile index 38e5da7469..2ae79da071 100644 --- a/board/blackstamp/Makefile +++ b/board/blackstamp/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/blackstamp/blackstamp.c b/board/blackstamp/blackstamp.c index 06d004a39e..d233b8a7fc 100644 --- a/board/blackstamp/blackstamp.c +++ b/board/blackstamp/blackstamp.c @@ -1,5 +1,5 @@ /* - * U-boot - blackstamp.c BlackStamp board specific routines + * U-Boot - blackstamp.c BlackStamp board specific routines * Most code stolen from boards/bf533-stamp/bf533-stamp.c * Edited to the BlackStamp by Ben Matthews for UR LLE * diff --git a/board/blackvme/Makefile b/board/blackvme/Makefile index 4ff989a140..9a617757ea 100644 --- a/board/blackvme/Makefile +++ b/board/blackvme/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/blackvme/blackvme.c b/board/blackvme/blackvme.c index eccdaf3a48..d8932ed910 100644 --- a/board/blackvme/blackvme.c +++ b/board/blackvme/blackvme.c @@ -1,4 +1,4 @@ -/* U-boot - blackvme.c board specific routines +/* U-Boot - blackvme.c board specific routines * (c) Wojtek Skulski 2010 info@skutek.com * Board info: http://www.skutek.com * Copyright (c) 2005-2009 Analog Devices Inc. diff --git a/board/br4/Makefile b/board/br4/Makefile index 68e24ab83f..c6c03aba09 100644 --- a/board/br4/Makefile +++ b/board/br4/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) Switchfin Org. # diff --git a/board/br4/br4.c b/board/br4/br4.c index bc034e38d4..6f3f170a32 100644 --- a/board/br4/br4.c +++ b/board/br4/br4.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) Switchfin Org. * diff --git a/board/cm-bf527/Makefile b/board/cm-bf527/Makefile index ff8ad43d51..1d662c6684 100644 --- a/board/cm-bf527/Makefile +++ b/board/cm-bf527/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf527/cm-bf527.c b/board/cm-bf527/cm-bf527.c index 3186c6717e..0c2138b082 100644 --- a/board/cm-bf527/cm-bf527.c +++ b/board/cm-bf527/cm-bf527.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/cm-bf533/Makefile b/board/cm-bf533/Makefile index ec99638d0a..41e100da1b 100644 --- a/board/cm-bf533/Makefile +++ b/board/cm-bf533/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf533/cm-bf533.c b/board/cm-bf533/cm-bf533.c index a863195057..02ef076735 100644 --- a/board/cm-bf533/cm-bf533.c +++ b/board/cm-bf533/cm-bf533.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/cm-bf537e/Makefile b/board/cm-bf537e/Makefile index be8056f4ba..317098cf2e 100644 --- a/board/cm-bf537e/Makefile +++ b/board/cm-bf537e/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf537e/cm-bf537e.c b/board/cm-bf537e/cm-bf537e.c index 57c72a2c06..7e4cfc2116 100644 --- a/board/cm-bf537e/cm-bf537e.c +++ b/board/cm-bf537e/cm-bf537e.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/cm-bf537u/Makefile b/board/cm-bf537u/Makefile index 38dd3fbb21..835d5b73f0 100644 --- a/board/cm-bf537u/Makefile +++ b/board/cm-bf537u/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf537u/cm-bf537u.c b/board/cm-bf537u/cm-bf537u.c index f365cdbeb7..aad72a9783 100644 --- a/board/cm-bf537u/cm-bf537u.c +++ b/board/cm-bf537u/cm-bf537u.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/cm-bf548/Makefile b/board/cm-bf548/Makefile index 98aca32b1f..1e11b8cdb1 100644 --- a/board/cm-bf548/Makefile +++ b/board/cm-bf548/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf548/cm-bf548.c b/board/cm-bf548/cm-bf548.c index 90ce4c3eb7..d9d018bfbc 100644 --- a/board/cm-bf548/cm-bf548.c +++ b/board/cm-bf548/cm-bf548.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/cm-bf561/Makefile b/board/cm-bf561/Makefile index c8764fb3ce..e0f0c34095 100644 --- a/board/cm-bf561/Makefile +++ b/board/cm-bf561/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf561/cm-bf561.c b/board/cm-bf561/cm-bf561.c index 5741f64107..99b7eb2612 100644 --- a/board/cm-bf561/cm-bf561.c +++ b/board/cm-bf561/cm-bf561.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README index f2c959949c..0777c781c2 100644 --- a/board/congatec/cgtqmx6eval/README +++ b/board/congatec/cgtqmx6eval/README @@ -3,10 +3,10 @@ U-Boot for the Congatec QMX6 boards This file contains information for the port of U-Boot to the Congatec QMX6 boards. -1. Building U-boot +1. Building U-Boot ------------------ -- Build U-boot for Congatec QMX6 boards: +- Build U-Boot for Congatec QMX6 boards: $ make mrproper $ make cgtqmx6eval_defconfig @@ -17,7 +17,7 @@ This will generate the following binaries: - SPL - u-boot.img -2. Flashing U-boot in the SPI NOR +2. Flashing U-Boot in the SPI NOR --------------------------------- Copy SPL and u-boot.img to the exported TFTP directory of the @@ -41,7 +41,7 @@ host PC (/tftpboot , for example). => sf write 0x12000000 0x10000 0x70000 -Reboot the board and the new U-boot should come up. +Reboot the board and the new U-Boot should come up. 3. Booting from the SD card --------------------------- @@ -64,9 +64,9 @@ command: => bmode esdhc4 -And then the U-boot from the big slot will boot. +And then the U-Boot from the big slot will boot. -Note: If the "bmode" command is not available from your pre-installed U-boot, +Note: If the "bmode" command is not available from your pre-installed U-Boot, these instruction will produce the same effect: => mw.l 0x20d8040 0x3850 diff --git a/board/dnp5370/Makefile b/board/dnp5370/Makefile index 865522fd6d..c0271da01b 100644 --- a/board/dnp5370/Makefile +++ b/board/dnp5370/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/dnp5370/dnp5370.c b/board/dnp5370/dnp5370.c index ae9ba84dc2..56e3b026af 100644 --- a/board/dnp5370/dnp5370.c +++ b/board/dnp5370/dnp5370.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * (C) Copyright 2010 3ality Digital Systems * diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c index f8c746824a..ad7a8cfbb8 100644 --- a/board/embest/mx6boards/mx6boards.c +++ b/board/embest/mx6boards/mx6boards.c @@ -221,7 +221,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * ** RiOTboard : * mmc0 SDCard slot (bottom) * mmc1 uSDCard slot (top) diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c index 4b2303e849..164ec0a47b 100644 --- a/board/freescale/b4860qds/eth_b4860qds.c +++ b/board/freescale/b4860qds/eth_b4860qds.c @@ -269,7 +269,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR); /* - * XFI does not need a PHY to work, but to make U-boot + * XFI does not need a PHY to work, but to make U-Boot * happy, assign a fake PHY address for a XFI port. */ fm_info_set_phy_address(FM1_10GEC1, 0); diff --git a/board/freescale/bsc9131rdb/README b/board/freescale/bsc9131rdb/README index 4902b98ba1..c8405970c1 100644 --- a/board/freescale/bsc9131rdb/README +++ b/board/freescale/bsc9131rdb/README @@ -86,9 +86,9 @@ Default Boot Method -------------------- NAND boot -Building U-boot +Building U-Boot -------------- -To build the u-boot for BSC9131RDB: +To build the U-Boot for BSC9131RDB: 1. NAND Flash with sysclk 66MHz(J16 on RDB closed, default) make BSC9131RDB_NAND 2. NAND Flash with sysclk 100MHz(J16 on RDB open) @@ -123,7 +123,7 @@ DDR Memory map Flashing Images --------------- -To place a new u-boot image in the NAND flash and then boot +To place a new U-Boot image in the NAND flash and then boot with that new image temporarily, use this: tftp 1000000 u-boot-nand.bin nand erase 0 100000 diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README index f8377c9aa4..ede95d41da 100644 --- a/board/freescale/bsc9132qds/README +++ b/board/freescale/bsc9132qds/README @@ -87,9 +87,9 @@ Default Boot Method -------------------- NOR boot -Building U-boot +Building U-Boot -------------- -To build the u-boot for BSC9132QDS: +To build the U-Boot for BSC9132QDS: 1. NOR Flash make BSC9132QDS_NOR_DDRCLK100 : For 100MHZ DDR CLK make BSC9132QDS_NOR_DDRCLK133 : For 133MHZ DDR CLK @@ -122,7 +122,7 @@ Memory map Flashing Images --------------- -To place a new u-boot image in the NAND flash and then boot +To place a new U-Boot image in the NAND flash and then boot with that new image temporarily, use this: tftp 1000000 u-boot-nand.bin nand erase 0 100000 diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README index 3bc396b35a..2e249cbb3a 100644 --- a/board/freescale/c29xpcie/README +++ b/board/freescale/c29xpcie/README @@ -53,7 +53,7 @@ Settings of DIP-switch SW5[1:4]= 0110 and SW5[6]=0 for boot from SPI flash Note: 1 stands for 'off', 0 stands for 'on' -Build and program u-boot to NOR flash +Build and program U-Boot to NOR flash ================================== 1. Build u-boot.bin image example: export ARCH=powerpc @@ -86,7 +86,7 @@ There are four banks in C29XPCIE board, example to change bank booting: - bank 4 on the flash 0x3000000~0x3ffffff or set SW5[7]= ON/OFF and SW5[7]= ON/OFF, then power on again. -Build and program u-boot to SPI flash +Build and program U-Boot to SPI flash ================================== 1. Build u-boot-spi.bin image make C29xPCIE_SPIFLASH_config; make diff --git a/board/freescale/ls2080a/README b/board/freescale/ls2080a/README index 7e53f1f1e4..646cc02693 100644 --- a/board/freescale/ls2080a/README +++ b/board/freescale/ls2080a/README @@ -12,7 +12,7 @@ Memory map from core's view 0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 -Other addresses are either reserved, or not used directly by u-boot. +Other addresses are either reserved, or not used directly by U-Boot. This list should be updated when more addresses are used. Booting Linux flavors which do not support 48-bit VA (< Linux 3.18) diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README index 375e97c9b0..6ddad92f2c 100644 --- a/board/freescale/ls2080aqds/README +++ b/board/freescale/ls2080aqds/README @@ -103,7 +103,7 @@ Memory map from core's view 0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 -Other addresses are either reserved, or not used directly by u-boot. +Other addresses are either reserved, or not used directly by U-Boot. This list should be updated when more addresses are used. IFC region map from core's view diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c index ebc9d47468..42ff74317e 100644 --- a/board/freescale/ls2080aqds/eth.c +++ b/board/freescale/ls2080aqds/eth.c @@ -716,7 +716,7 @@ void ls2080a_handle_phy_interface_xsgmii(int i) switch (serdes1_prtcl) { case 0x2A: /* - * XFI does not need a PHY to work, but to avoid U-boot use + * XFI does not need a PHY to work, but to avoid U-Boot use * default PHY address which is zero to a MAC when it found * a MAC has no PHY address, we give a PHY address to XFI * MAC, and should not use a real XAUI PHY address, since diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README index 7fc2569648..6708ca9cc7 100644 --- a/board/freescale/ls2080ardb/README +++ b/board/freescale/ls2080ardb/README @@ -87,7 +87,7 @@ Memory map from core's view 0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 -Other addresses are either reserved, or not used directly by u-boot. +Other addresses are either reserved, or not used directly by U-Boot. This list should be updated when more addresses are used. IFC region map from core's view diff --git a/board/freescale/m52277evb/README b/board/freescale/m52277evb/README index 3178d49d0a..92a83849ac 100644 --- a/board/freescale/m52277evb/README +++ b/board/freescale/m52277evb/README @@ -49,7 +49,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M52277EVB.h Board specific configuration file @@ -77,7 +77,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFTMR -- define to use DMA timer CONFIG_MCFPIT -- define to use PIT timer @@ -102,7 +102,7 @@ CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base -CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot, +CONFIG_LCD and CONFIG_CMD_USB are not supported in this current U-Boot, update will be provided at later time 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL @@ -113,7 +113,7 @@ update will be provided at later time SRAM: 0x80000000-0x8FFFFFFF (256MB) IP: 0xF0000000-0xFFFFFFFF (256MB) -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Flash0: 0x00000000-0x00FFFFFF (16MB) diff --git a/board/freescale/m5253evbe/README b/board/freescale/m5253evbe/README index f51609f3e0..2ed5c768d5 100644 --- a/board/freescale/m5253evbe/README +++ b/board/freescale/m5253evbe/README @@ -13,7 +13,7 @@ Created 06/05/2007 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL =========================================== -2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.1. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: SDR: 0x00000000-0x00ffffff SRAM0: 0x20010000-0x20017fff diff --git a/board/freescale/m53017evb/README b/board/freescale/m53017evb/README index 84fc1ecfb1..224e79c46a 100644 --- a/board/freescale/m53017evb/README +++ b/board/freescale/m53017evb/README @@ -47,7 +47,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M53017EVB.h Board specific configuration file @@ -75,7 +75,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver @@ -118,7 +118,7 @@ CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base SRAM: 0x80000000-0x8FFFFFFF (256MB) IP: 0xFC000000-0xFFFFFFFF (256MB) -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Flash0: 0x00000000-0x00FFFFFF (16MB) DDR: 0x40000000-0x4FFFFFFF (256MB) diff --git a/board/freescale/m5373evb/README b/board/freescale/m5373evb/README index 52eac7b2ff..582e0c3d9e 100644 --- a/board/freescale/m5373evb/README +++ b/board/freescale/m5373evb/README @@ -46,7 +46,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M5373EVB.h Board specific configuration file @@ -74,7 +74,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver @@ -117,7 +117,7 @@ CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base SRAM: 0x80000000-0x8FFFFFFF (256MB) IP: 0xF0000000-0xFFFFFFFF (256MB) -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Flash0: 0x00000000-0x00FFFFFF (16MB) diff --git a/board/freescale/m54455evb/README b/board/freescale/m54455evb/README index c70c4c5c25..c563ad99a7 100644 --- a/board/freescale/m54455evb/README +++ b/board/freescale/m54455evb/README @@ -48,7 +48,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M54455EVB.h Board specific configuration file @@ -78,7 +78,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver @@ -91,7 +91,7 @@ CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register MCFFEC_TOUT_LOOP -- set FEC timeout loop -CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot +CONFIG_HAS_ETH1 -- define to enable second FEC in U-Boot CONFIG_ISO_PARTITION -- enable ISO read/write CONFIG_DOS_PARTITION -- enable DOS read/write @@ -136,7 +136,7 @@ CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc CONFIG_SYS_MBAR -- define MBAR offset -CONFIG_SYS_ATMEL_BOOT -- To determine the u-boot is booted from Atmel or Intel +CONFIG_SYS_ATMEL_BOOT -- To determine the U-Boot is booted from Atmel or Intel CONFIG_MONITOR_IS_IN_RAM -- Not support @@ -163,7 +163,7 @@ CONFIG_SYS_SDRAM_BASE1 -- defines the DRAM Base 1 FlexBus: 0xC0000000-0xDFFFFFFF (512MB) IP: 0xF0000000-0xFFFFFFFF (256MB) -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Atmel boot: Flash0: 0x00000000-0x0007FFFF (512KB) diff --git a/board/freescale/m547xevb/README b/board/freescale/m547xevb/README index ce497c0d2a..30c5dedafe 100644 --- a/board/freescale/m547xevb/README +++ b/board/freescale/m547xevb/README @@ -54,7 +54,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M5475EVB.h Board specific configuration file @@ -88,7 +88,7 @@ CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register MCFFEC_TOUT_LOOP -- set FEC timeout loop -CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot +CONFIG_HAS_ETH1 -- define to enable second FEC in U-Boot CONFIG_CMD_USB -- enable USB commands CONFIG_USB_OHCI_NEW -- enable USB OHCI driver diff --git a/board/freescale/mpc8313erdb/README b/board/freescale/mpc8313erdb/README index be7ef32b45..697cee4c42 100644 --- a/board/freescale/mpc8313erdb/README +++ b/board/freescale/mpc8313erdb/README @@ -70,7 +70,7 @@ Freescale MPC8313ERDB Board 5. Downloading and Flashing Images -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot NOR flash: @@ -81,7 +81,7 @@ Freescale MPC8313ERDB Board first, to make sure that the TFTP load will succeed before it goes ahead and wipes out your current firmware. And of course, have an alternate means of programming the flash available - if the new u-boot doesn't boot. + if the new U-Boot doesn't boot. NAND flash: diff --git a/board/freescale/mpc8315erdb/README b/board/freescale/mpc8315erdb/README index b32132d053..8ad6d810c7 100644 --- a/board/freescale/mpc8315erdb/README +++ b/board/freescale/mpc8315erdb/README @@ -63,7 +63,7 @@ Freescale MPC8315ERDB Board 5. Downloading and Flashing Images -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot NOR flash: diff --git a/board/freescale/mpc8323erdb/README b/board/freescale/mpc8323erdb/README index 6f89829373..9a46da0781 100644 --- a/board/freescale/mpc8323erdb/README +++ b/board/freescale/mpc8323erdb/README @@ -22,10 +22,10 @@ Freescale MPC8323ERDB Board 3. Downloading and Flashing Images -3.1 Reflash U-boot Image using U-boot +3.1 Reflash U-Boot Image using U-Boot N.b, have an alternate means of programming - the flash available if the new u-boot doesn't boot. + the flash available if the new U-Boot doesn't boot. First try a: @@ -44,7 +44,7 @@ Freescale MPC8323ERDB Board erase fe000000 +$filesize cp.b $loadaddr fe000000 $filesize - To keep your old u-boot's environment variables, do a: + To keep your old U-Boot's environment variables, do a: saveenv diff --git a/board/freescale/mpc832xemds/README b/board/freescale/mpc832xemds/README index 4142aa9c8d..d141cd33e7 100644 --- a/board/freescale/mpc832xemds/README +++ b/board/freescale/mpc832xemds/README @@ -97,7 +97,7 @@ Freescale MPC832XEMDS Board make MPC832XEMDS_config make - MPC832x support PCI 33MHz and PCI 66MHz, to make u-boot support PCI: + MPC832x support PCI 33MHz and PCI 66MHz, to make U-Boot support PCI: 1)Make sure the DIP SW support PCI mode as described in Section 1.1. @@ -113,7 +113,7 @@ Freescale MPC832XEMDS Board tftp 10000 u-boot.bin -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot tftp 20000 u-boot.bin protect off fe000000 fe0fffff diff --git a/board/freescale/mpc837xemds/README b/board/freescale/mpc837xemds/README index faf21c9ffb..dbb15171e6 100644 --- a/board/freescale/mpc837xemds/README +++ b/board/freescale/mpc837xemds/README @@ -90,7 +90,7 @@ Freescale MPC837xEMDS Board tftp 40000 u-boot.bin -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot tftp 40000 u-boot.bin protect off fe000000 fe1fffff diff --git a/board/freescale/mpc837xerdb/README b/board/freescale/mpc837xerdb/README index cfb6efa27e..12df2f2e75 100644 --- a/board/freescale/mpc837xerdb/README +++ b/board/freescale/mpc837xerdb/README @@ -84,7 +84,7 @@ Freescale MPC837xE-RDB Board tftp $loadaddr u-boot.bin -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot tftp $loadaddr u-boot.bin protect off fe000000 fe0fffff diff --git a/board/freescale/mpc8569mds/README b/board/freescale/mpc8569mds/README index 3d12a964cd..86c3ccde79 100644 --- a/board/freescale/mpc8569mds/README +++ b/board/freescale/mpc8569mds/README @@ -3,7 +3,7 @@ Overview MPC8569MDS is composed of two boards - PB (Processor Board) and PIB (Platform I/O Board). The mpc8569 PowerTM processor is mounted on PB board. -Building U-boot +Building U-Boot ----------- make MPC8569MDS_config make @@ -22,10 +22,10 @@ Memory Map 0xfe00_0000 0xffff_ffff Flash 32MB -Flashing u-boot Images +Flashing U-Boot Images --------------- -Use the following commands to program u-boot image into flash: +Use the following commands to program U-Boot image into flash: => tftp 1000000 u-boot.bin => protect off all diff --git a/board/freescale/mpc8572ds/README b/board/freescale/mpc8572ds/README index 57fd2ad616..f1ffdd1730 100644 --- a/board/freescale/mpc8572ds/README +++ b/board/freescale/mpc8572ds/README @@ -3,7 +3,7 @@ Overview MPC8572DS is a high-performance computing, evaluation and development platform supporting the mpc8572 PowerTM processor. -Building U-boot +Building U-Boot ----------- make MPC8572DS_config make @@ -22,14 +22,14 @@ Memory Map 0xe800_0000 - 0xebff_ffff Alternate bank 64MB 0xec00_0000 - 0xefff_ffff Boot bank 64MB -0xebf8_0000 - 0xebff_ffff Alternate u-boot address 512KB -0xeff8_0000 - 0xefff_ffff Boot u-boot address 512KB +0xebf8_0000 - 0xebff_ffff Alternate U-Boot address 512KB +0xeff8_0000 - 0xefff_ffff Boot U-Boot address 512KB Flashing Images --------------- -To place a new u-boot image in the alternate flash bank and then reset with that +To place a new U-Boot image in the alternate flash bank and then reset with that new image temporarily, use this: tftp 1000000 u-boot.bin @@ -135,7 +135,7 @@ Implementing AMP(Asymmetric MultiProcessing) 5. Bring up two cores separately: - a. Power on the board, under u-boot prompt: + a. Power on the board, under U-Boot prompt: => setenv => setenv => setenv bootargs root=/dev/ram rw console=ttyS0,115200 @@ -154,7 +154,7 @@ Implementing AMP(Asymmetric MultiProcessing) => fdt chosen $initrd_start $initrd_end => bootm prep => cpu 1 release $bootm_low - $fdtaddr - - c. Bring up core0's kernel(on the same u-boot console): + c. Bring up core0's kernel(on the same U-Boot console): => setenv bootm_low 0 => setenv bootm_size 0x20000000 => tftp 1000000 8572/uImage.core0 @@ -162,5 +162,5 @@ Implementing AMP(Asymmetric MultiProcessing) => tftp c00000 8572/mpc8572ds_core0.dtb => bootm 1000000 2000000 c00000 -Please note only core0 will run u-boot, core1 starts kernel directly after +Please note only core0 will run U-Boot, core1 starts kernel directly after "cpu release" command is issued. diff --git a/board/freescale/mpc8610hpcd/README b/board/freescale/mpc8610hpcd/README index 31a9af3fee..066e625d48 100644 --- a/board/freescale/mpc8610hpcd/README +++ b/board/freescale/mpc8610hpcd/README @@ -27,7 +27,7 @@ To Flash U-Boot into the booting bank: cp.b 1000000 fff00000 $filesize -To Flash U-boot into the alternate bank +To Flash U-Boot into the alternate bank tftp 1000000 u-boot.bin erase fbf00000 +$filesize diff --git a/board/freescale/mpc8641hpcn/README b/board/freescale/mpc8641hpcn/README index d8fe0a4a13..77909a8383 100644 --- a/board/freescale/mpc8641hpcn/README +++ b/board/freescale/mpc8641hpcn/README @@ -80,7 +80,7 @@ Switches: 3. Flash U-Boot --------------- The flash range 0xEF800000 to 0xEFFFFFFF can be divided into 2 halves. -It is possible to use either half to boot using u-boot. Switch 5 bit 2 +It is possible to use either half to boot using U-Boot. Switch 5 bit 2 is used for this purpose. 0xEF800000 to 0xEFBFFFFF - 4MB @@ -102,7 +102,7 @@ To Flash U-Boot into the booting bank (0xEFC00000 - 0xEFFFFFFF): or use tftpflash command: run tftpflash -To Flash U-boot into the alternative bank (0xEF800000 - 0xEFBFFFFF): +To Flash U-Boot into the alternative bank (0xEF800000 - 0xEFBFFFFF): tftp 1000000 u-boot.bin erase efb00000 +$filesize @@ -113,7 +113,7 @@ To Flash U-boot into the alternative bank (0xEF800000 - 0xEFBFFFFF): ------------- NOTE: RIO and PCI are mutually exclusive, so they share an address -For 32-bit u-boot, devices are mapped so that the virtual address == +For 32-bit U-Boot, devices are mapped so that the virtual address == the physical address, and the map looks liks this: Memory Range Device Size @@ -130,7 +130,7 @@ the physical address, and the map looks liks this: 0xffc1_0000 0xffc1_ffff PCI2/PEX2 IO 64K 0xef80_0000 0xefff_ffff Flash 8M -For 36-bit-enabled u-boot, the virtual map is the same as for 32-bit. +For 36-bit-enabled U-Boot, the virtual map is the same as for 32-bit. However, the physical map is altered to reside in 36-bit space, as follows. Addresses are no longer mapped with VA == PA. All accesses from software use the VA; the PA is only used for setting up windows diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README index f9d6324114..a248fb21df 100644 --- a/board/freescale/mx28evk/README +++ b/board/freescale/mx28evk/README @@ -1,7 +1,7 @@ FREESCALE MX28EVK ================== -Supported hardware: MX28EVK rev C and D are supported in U-boot. +Supported hardware: MX28EVK rev C and D are supported in U-Boot. Files of the MX28EVK port -------------------------- diff --git a/board/freescale/mx35pdk/README b/board/freescale/mx35pdk/README index 7232b53357..6f6841f099 100644 --- a/board/freescale/mx35pdk/README +++ b/board/freescale/mx35pdk/README @@ -71,7 +71,7 @@ exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nf Flashing U-Boot -------------------------------- -U-boot should be stored on the NOR flash. +U-Boot should be stored on the NOR flash. The boot storage can be select using the switches on the personality board (SW1-SW2) and on the DEBUG board (SW4-SW10). @@ -96,7 +96,7 @@ Creating 6 MTD partitions on "mxc_nor_flash.0": To erase the whole partition: $ flash_eraseall /dev/mtd0 -Writing u-boot: +Writing U-Boot: dd if=u-boot.bin of=/dev/mtd0 To boot from NOR, you have to select the switches as follows: diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 46b4f3f68e..e9d9664a82 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -268,7 +268,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 SD2 * mmc1 SD3 * mmc2 eMMC diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index df205eac6f..4f816c4c02 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -202,7 +202,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 USDHC1 * mmc1 USDHC2 * mmc2 USDHC3 diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c index c9631d2578..a240982975 100644 --- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c +++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c @@ -339,7 +339,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 USDHC3 * mmc1 USDHC4 */ diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 97e9ed7df6..41319c66d2 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -348,7 +348,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 USDHC2 * mmc1 USDHC3 * mmc2 USDHC4 diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README index d48c7ba20f..1edccf688c 100644 --- a/board/freescale/mx6ul_14x14_evk/README +++ b/board/freescale/mx6ul_14x14_evk/README @@ -1,7 +1,7 @@ -How to use U-boot on Freescale MX6UL 14x14 EVK +How to use U-Boot on Freescale MX6UL 14x14 EVK ----------------------------------------------- -- Build U-boot for MX6UL 14x14 EVK: +- Build U-Boot for MX6UL 14x14 EVK: $ make mrproper $ make mx6ul_14x14_evk_defconfig @@ -28,5 +28,5 @@ switch label numbers reference). - Connect the USB cable between the EVK and the PC for the console. (The USB console connector is the one close the push buttons) -- Insert the micro SD card in the board, power it up and U-boot messages should +- Insert the micro SD card in the board, power it up and U-Boot messages should come up. diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index b9b35736cf..98d5675ff1 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -394,7 +394,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 USDHC1 * mmc1 USDHC2 */ diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index 20e56f281b..fee24e2b5f 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -366,7 +366,7 @@ int board_mmc_init(bd_t *bis) int i, ret; /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 USDHC1 * mmc2 USDHC3 (eMMC) */ diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA index cde246dde2..105942f7a5 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PA +++ b/board/freescale/p1010rdb/README.P1010RDB-PA @@ -95,7 +95,7 @@ is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM instead of to CAN/UART1. -Build and burn u-boot to NOR flash +Build and burn U-Boot to NOR flash ================================== 1. Build u-boot.bin image export ARCH=powerpc @@ -131,7 +131,7 @@ CPLD NOR bank selection register address 0xFFB00009 Bit[0]: 1 - boot from lower 4 sectors -Build and burn u-boot to NAND flash +Build and burn U-Boot to NAND flash =================================== 1. Build u-boot.bin image export ARCH=powerpc @@ -146,7 +146,7 @@ Build and burn u-boot to NAND flash 3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on. -Build and burn u-boot to SPI flash +Build and burn U-Boot to SPI flash ================================== 1. Build u-boot-spi.bin image make P1010RDB_SPIFLASH_config; make diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB index c5d1419445..dc82f0df09 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PB +++ b/board/freescale/p1010rdb/README.P1010RDB-PB @@ -112,14 +112,14 @@ To enable FlexCAN: To enable SDHC in case of NOR/NAND/SPI boot a) For temporary use case in runtime without reboot system - run 'mux sdhc' in u-boot to validate SDHC with invalidating IFC. + run 'mux sdhc' in U-Boot to validate SDHC with invalidating IFC. b) For long-term use case set 'esdhc' in hwconfig and save it. To enable IFC in case of SD boot a) For temporary use case in runtime without reboot system - run 'mux ifc' in u-boot to validate IFC with invalidating SDHC. + run 'mux ifc' in U-Boot to validate IFC with invalidating SDHC. b) For long-term use case set 'ifc' in hwconfig and save it. diff --git a/board/freescale/t102xqds/README b/board/freescale/t102xqds/README index bb0f2805dc..c00e3bafbe 100644 --- a/board/freescale/t102xqds/README +++ b/board/freescale/t102xqds/README @@ -172,16 +172,16 @@ Start Address End Address Description Size 128MB NOR Flash memory Map -------------------------- Start Address End Address Definition Max size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB @@ -221,11 +221,11 @@ Software configurations and board settings Switching between default bank0 and alternate bank4 on NOR flash To change boot source to vbank4: - via software: run command 'qixis_reset altbank' in u-boot. + via software: run command 'qixis_reset altbank' in U-Boot. via DIP-switch: set SW6[1:4] = '0100' To change boot source to vbank0: - via software: run command 'qixis_reset' in u-boot. + via software: run command 'qixis_reset' in U-Boot. via DIP-Switch: set SW6[1:4] = '0000' 2. NAND Boot: @@ -273,8 +273,8 @@ e) For SDXC: set adaptor=sdxc in hwconfig ------------------------------- PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. SPL further initializes DDR using SPD and environment variables -and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. -Finally SPL transers control to u-boot for futher booting. +and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR. +Finally SPL transers control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -294,14 +294,14 @@ Run time view of SPL framework ------------------------------------------------- |STACK | 0xFFFD8000 (22KB) | ------------------------------------------------- -|U-boot SPL | 0xFFFD8000 (160KB) | +|U-Boot SPL | 0xFFFD8000 (160KB) | ------------------------------------------------- NAND Flash memory Map on T1024QDS ------------------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB -0x100000 0x15FFFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot 1MB +0x100000 0x15FFFF U-Boot env 8KB 0x160000 0x17FFFF FMAN Ucode 128KB 0x180000 0x19FFFF QE Firmware 128KB @@ -309,8 +309,8 @@ Start End Definition Size SD Card memory Map on T1024QDS ---------------------------------------------------- Block #blocks Definition Size -0x008 2048 u-boot img 1MB -0x800 0016 u-boot env 8KB +0x008 2048 U-Boot img 1MB +0x800 0016 U-Boot env 8KB 0x820 0256 FMAN Ucode 128KB 0x920 0256 QE Firmware 128KB @@ -318,8 +318,8 @@ Block #blocks Definition Size SPI Flash memory Map on T1024QDS ---------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB -0x100000 0x101FFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot img 1MB +0x100000 0x101FFF U-Boot env 8KB 0x110000 0x12FFFF FMAN Ucode 128KB 0x130000 0x14FFFF QE Firmware 128KB diff --git a/board/freescale/t102xqds/eth_t102xqds.c b/board/freescale/t102xqds/eth_t102xqds.c index ca54e2a4f0..19543c0738 100644 --- a/board/freescale/t102xqds/eth_t102xqds.c +++ b/board/freescale/t102xqds/eth_t102xqds.c @@ -310,7 +310,7 @@ int board_eth_init(bd_t *bis) case 0x95: case 0x99: /* - * XFI does not need a PHY to work, but to avoid U-boot use + * XFI does not need a PHY to work, but to avoid U-Boot use * default PHY address which is zero to a MAC when it found * a MAC has no PHY address, we give a PHY address to XFI * MAC, and should not use a real XAUI PHY address, since diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README index 7d3794a6d6..a0af25a432 100644 --- a/board/freescale/t102xrdb/README +++ b/board/freescale/t102xrdb/README @@ -145,8 +145,8 @@ Start Address End Address Description Size 128MB NOR Flash Memory Layout ----------------------------- Start Address End Address Definition Max size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB 0xED300000 0xEFDFFFFF rootfs (alt bank) 44MB @@ -158,8 +158,8 @@ Start Address End Address Definition Max size 0xEC700000 0xEC7FFFFF HV.uImage (alternate bank) 1MB 0xEC020000 0xEC6FFFFF Linux.uImage (alt bank) ~7MB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB 0xE9300000 0xEBDFFFFF rootfs (current bank) 44MB @@ -198,18 +198,18 @@ Software configurations and board settings Switching between default bank0 and alternate bank4 on NOR flash To change boot source to vbank4: on T1024RDB: - via software: run command 'cpld reset altbank' in u-boot. + via software: run command 'cpld reset altbank' in U-Boot. via DIP-switch: set SW3[5:7] = '100' on T1023RDB: - via software: run command 'switch bank4' in u-boot. + via software: run command 'switch bank4' in U-Boot. via DIP-switch: set SW3[5:7] = '100' To change boot source to vbank0: on T1024RDB: - via software: run command 'cpld reset' in u-boot. + via software: run command 'cpld reset' in U-Boot. via DIP-Switch: set SW3[5:7] = '000' on T1023RDB: - via software: run command 'switch bank0' in u-boot. + via software: run command 'switch bank0' in U-Boot. via DIP-switch: set SW3[5:7] = '000' 2. NAND Boot: @@ -255,8 +255,8 @@ Software configurations and board settings ------------------------------- PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. SPL further initializes DDR using SPD and environment variables -and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. -Finally SPL transers control to u-boot for futher booting. +and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR. +Finally SPL transers control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -276,14 +276,14 @@ Run time view of SPL framework ------------------------------------------------- |STACK | 0xFFFD8000 (22KB) | ------------------------------------------------- -|U-boot SPL | 0xFFFD8000 (160KB) | +|U-Boot SPL | 0xFFFD8000 (160KB) | ------------------------------------------------- NAND Flash memory Map on T1024RDB ------------------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB(2 block) -0x100000 0x17FFFF u-boot env 512KB(1 block) +0x000000 0x0FFFFF U-Boot 1MB(2 block) +0x100000 0x17FFFF U-Boot env 512KB(1 block) 0x180000 0x1FFFFF FMAN Ucode 512KB(1 block) 0x200000 0x27FFFF QE Firmware 512KB(1 block) @@ -291,16 +291,16 @@ Start End Definition Size NAND Flash memory Map on T1023RDB ---------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB -0x100000 0x15FFFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot 1MB +0x100000 0x15FFFF U-Boot env 8KB 0x160000 0x17FFFF FMAN Ucode 128KB SD Card memory Map on T102xRDB ---------------------------------------------------- Block #blocks Definition Size -0x008 2048 u-boot img 1MB -0x800 0016 u-boot env 8KB +0x008 2048 U-Boot img 1MB +0x800 0016 U-Boot env 8KB 0x820 0256 FMAN Ucode 128KB 0x920 0256 QE Firmware 128KB(only T1024RDB) @@ -308,8 +308,8 @@ Block #blocks Definition Size 64MB SPI Flash memory Map on T102xRDB ---------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB -0x100000 0x101FFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot img 1MB +0x100000 0x101FFF U-Boot env 8KB 0x110000 0x12FFFF FMAN Ucode 128KB 0x130000 0x14FFFF QE Firmware 128KB(only T1024RDB) 0x300000 0x3FFFFF device tree 128KB diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README index 8160ca0bc0..6c5ffc07f8 100644 --- a/board/freescale/t1040qds/README +++ b/board/freescale/t1040qds/README @@ -118,15 +118,15 @@ Start Address End Address Description Size NOR Flash memory Map on T1040QDS -------------------------------- Start End Definition Size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB @@ -138,7 +138,7 @@ Various Software configurations/environment variables/commands -------------------------------------------------------------- The below commands apply to T1040QDS -1. U-boot environment variable hwconfig +1. U-Boot environment variable hwconfig The default hwconfig is: hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: dr_mode=host,phy_type=utmi diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README index b9d2212000..98b3f63db2 100644 --- a/board/freescale/t104xrdb/README +++ b/board/freescale/t104xrdb/README @@ -186,15 +186,15 @@ Start Address End Address Description Size NOR Flash memory Map --------------------- Start End Definition Size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB @@ -206,7 +206,7 @@ Various Software configurations/environment variables/commands -------------------------------------------------------------- The below commands apply to the board -1. U-boot environment variable hwconfig +1. U-Boot environment variable hwconfig The default hwconfig is: hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: dr_mode=host,phy_type=utmi @@ -228,8 +228,8 @@ NAND boot with 2 Stage boot loader ---------------------------------- PBL initialise the internal SRAM and copy SPL(160KB) in SRAM. SPL further initialise DDR using SPD and environment variables and copy -u-boot(768 KB) from flash to DDR. -Finally SPL transer control to u-boot for futher booting. +U-Boot(768 KB) from flash to DDR. +Finally SPL transer control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -250,30 +250,30 @@ SPL has following features: ----------------------------------------------- STACK | 0xFFFD8000 (22KB) | ----------------------------------------------- - U-boot SPL | 0xFFFD8000 (160KB) | + U-Boot SPL | 0xFFFD8000 (160KB) | ----------------------------------------------- NAND Flash memory Map on T104xRDB ------------------------------------------ Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB -0x180000 0x19FFFF u-boot env 128KB +0x000000 0x0FFFFF U-Boot 1MB +0x180000 0x19FFFF U-Boot env 128KB 0x280000 0x29FFFF FMAN Ucode 128KB 0x380000 0x39FFFF QE Firmware 128KB SD Card memory Map on T104xRDB ------------------------------------------ Block #blocks Definition Size -0x008 2048 u-boot 1MB -0x800 0024 u-boot env 8KB +0x008 2048 U-Boot 1MB +0x800 0024 U-Boot env 8KB 0x820 0256 FMAN Ucode 128KB 0x920 0256 QE Firmware 128KB SPI Flash memory Map on T104xRDB ------------------------------------------ Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB -0x100000 0x101FFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot 1MB +0x100000 0x101FFF U-Boot env 8KB 0x110000 0x12FFFF FMAN Ucode 128KB 0x130000 0x14FFFF QE Firmware 128KB diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README index 83060c10f3..2a2a0e514c 100755 --- a/board/freescale/t208xqds/README +++ b/board/freescale/t208xqds/README @@ -92,7 +92,7 @@ XFI: 10GBASE-KR scenario. So, for XFI usage, there are two scenarios, one will use fiber cable, another will use copper cable. An hwconfig env "fsl_10gkr_copper" is - introduced to indicate a XFI port will use copper cable, and U-boot + introduced to indicate a XFI port will use copper cable, and U-Boot will fixup the dtb accordingly. It's used as: fsl_10gkr_copper:<10g_mac_name> The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4, they @@ -108,7 +108,7 @@ XFI: - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane in 1G-KX mode, need to set corresponding bit in SerDes Protocol Configuration - Register 1 (PCCR1), and U-boot fixup the dtb for kernel to do proper + Register 1 (PCCR1), and U-Boot fixup the dtb for kernel to do proper initialization. Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a @@ -142,15 +142,15 @@ Start Address End Address Description Size 128M NOR Flash memory Map ------------------------- Start Address End Address Definition Max size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB @@ -172,11 +172,11 @@ Software configurations and board settings Switching between default bank0 and alternate bank4 on NOR flash To change boot source to vbank4: - by software: run command 'qixis_reset altbank' in u-boot. + by software: run command 'qixis_reset altbank' in U-Boot. by DIP-switch: set SW6[1:4] = '0100' To change boot source to vbank0: - by software: run command 'qixis_reset' in u-boot. + by software: run command 'qixis_reset' in U-Boot. by DIP-Switch: set SW6[1:4] = '0000' 2. NAND Boot: @@ -216,8 +216,8 @@ Software configurations and board settings ------------------------------- PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. SPL further initializes DDR using SPD and environment variables -and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. -Finally SPL transers control to u-boot for futher booting. +and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR. +Finally SPL transers control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -237,30 +237,30 @@ Run time view of SPL framework ------------------------------------------------- |STACK | 0xFFFD8000 (22KB) | ------------------------------------------------- -|U-boot SPL | 0xFFFD8000 (160KB) | +|U-Boot SPL | 0xFFFD8000 (160KB) | ------------------------------------------------- NAND Flash memory Map on T2080QDS -------------------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB (2 blocks) -0x100000 0x17FFFF u-boot env 512KB (1 block) +0x000000 0x0FFFFF U-Boot img 1MB (2 blocks) +0x100000 0x17FFFF U-Boot env 512KB (1 block) 0x180000 0x1FFFFF FMAN ucode 512KB (1 block) Micro SD Card memory Map on T2080QDS ---------------------------------------------------- Block #blocks Definition Size -0x008 2048 u-boot img 1MB -0x800 0016 u-boot env 8KB +0x008 2048 U-Boot img 1MB +0x800 0016 U-Boot env 8KB 0x820 0128 FMAN ucode 64KB SPI Flash memory Map on T2080QDS ---------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB -0x100000 0x101FFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot img 1MB +0x100000 0x101FFF U-Boot env 8KB 0x110000 0x11FFFF FMAN ucode 64KB diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c index f08cff2654..e92b5d3a05 100644 --- a/board/freescale/t208xqds/eth_t208xqds.c +++ b/board/freescale/t208xqds/eth_t208xqds.c @@ -600,7 +600,7 @@ int board_eth_init(bd_t *bis) case 0x66: case 0x67: /* - * XFI does not need a PHY to work, but to avoid U-boot use + * XFI does not need a PHY to work, but to avoid U-Boot use * default PHY address which is zero to a MAC when it found * a MAC has no PHY address, we give a PHY address to XFI * MAC, and should not use a real XAUI PHY address, since diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README index 24484cd0ff..42b2b92396 100644 --- a/board/freescale/t208xrdb/README +++ b/board/freescale/t208xrdb/README @@ -107,16 +107,16 @@ Start Address End Address Description Size 128M NOR Flash memory Map ------------------------- Start Address End Address Definition Max size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xEFE00000 0xEFE3FFFF PHY CS4315 firmware 256KB 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xEBE00000 0xEBE3FFFF PHY CS4315 firmware (alt bank) 256KB 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB @@ -155,11 +155,11 @@ Software configurations and board settings Switching between default bank and alternate bank on NOR flash To change boot source to vbank4: - via software: run command 'cpld reset altbank' in u-boot. + via software: run command 'cpld reset altbank' in U-Boot. via DIP-switch: set SW3[5:7] = '100' To change boot source to vbank0: - via software: run command 'cpld reset' in u-boot. + via software: run command 'cpld reset' in U-Boot. via DIP-Switch: set SW3[5:7] = '000' 2. NAND Boot: @@ -197,8 +197,8 @@ Software configurations and board settings ------------------------------- PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. SPL further initializes DDR using SPD and environment variables -and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. -Finally SPL transers control to u-boot for futher booting. +and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR. +Finally SPL transers control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -218,14 +218,14 @@ Run time view of SPL framework ------------------------------------------------- |STACK | 0xFFFD8000 (22KB) | ------------------------------------------------- -|U-boot SPL | 0xFFFD8000 (160KB) | +|U-Boot SPL | 0xFFFD8000 (160KB) | ------------------------------------------------- NAND Flash memory Map on T2080RDB -------------------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB (2 blocks) -0x100000 0x17FFFF u-boot env 512KB (1 block) +0x000000 0x0FFFFF U-Boot img 1MB (2 blocks) +0x100000 0x17FFFF U-Boot env 512KB (1 block) 0x180000 0x1FFFFF FMAN ucode 512KB (1 block) 0x200000 0x27FFFF CS4315 ucode 512KB (1 block) @@ -233,8 +233,8 @@ Start End Definition Size Micro SD Card memory Map on T2080RDB ---------------------------------------------------- Block #blocks Definition Size -0x008 2048 u-boot img 1MB -0x800 0016 u-boot env 8KB +0x008 2048 U-Boot img 1MB +0x800 0016 U-Boot env 8KB 0x820 0128 FMAN ucode 64KB 0x8a0 0512 CS4315 ucode 256KB @@ -242,8 +242,8 @@ Block #blocks Definition Size SPI Flash memory Map on T2080RDB ---------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB -0x100000 0x101FFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot img 1MB +0x100000 0x101FFF U-Boot env 8KB 0x110000 0x11FFFF FMAN ucode 64KB 0x120000 0x15FFFF CS4315 ucode 256KB diff --git a/board/freescale/t4qds/README b/board/freescale/t4qds/README index 3962fee7f2..bf238146db 100644 --- a/board/freescale/t4qds/README +++ b/board/freescale/t4qds/README @@ -86,7 +86,7 @@ Board Features 10GBASE-KR scenario. So, for XFI usage, there are two scenarios, one will use fiber cable, another will use copper cable. An hwconfig env "fsl_10gkr_copper" is - introduced to indicate a XFI port will use copper cable, and U-boot + introduced to indicate a XFI port will use copper cable, and U-Boot will fixup the dtb accordingly. It's used as: fsl_10gkr_copper:<10g_mac_name> The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2, they @@ -118,7 +118,7 @@ The physical address of the last (boot page translation) varies with the actual Voltage ID and VDD override -------------------- -T4240 has a VID feature. U-boot reads the VID efuses and adjust the voltage +T4240 has a VID feature. U-Boot reads the VID efuses and adjust the voltage accordingly. The voltage can also be override by command vdd_override. The syntax is @@ -144,8 +144,8 @@ Users can set the final voltage directly. ------------------------------- PBL initializes the internal SRAM and copy SPL(160K) in SRAM. SPL further initialise DDR using SPD and environment variables -and copy u-boot(768 KB) from NAND/SD device to DDR. -Finally SPL transers control to u-boot for futher booting. +and copy U-Boot(768 KB) from NAND/SD device to DDR. +Finally SPL transers control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -165,21 +165,21 @@ Run time view of SPL framework ------------------------------------------------- |STACK | 0xFFFD8000 (22KB) | ------------------------------------------------- -|U-boot SPL | 0xFFFD8000 (160KB) | +|U-Boot SPL | 0xFFFD8000 (160KB) | ------------------------------------------------- NAND Flash memory Map on T4QDS -------------------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB -0x140000 0x15FFFF u-boot env 128KB +0x000000 0x0FFFFF U-Boot img 1MB +0x140000 0x15FFFF U-Boot env 128KB 0x160000 0x17FFFF FMAN Ucode 128KB Micro SD Card memory Map on T4QDS ---------------------------------------------------- Block #blocks Definition Size -0x008 2048 u-boot img 1MB -0x800 0016 u-boot env 8KB +0x008 2048 U-Boot img 1MB +0x800 0016 U-Boot env 8KB 0x820 0128 FMAN ucode 64KB Switch Settings: (ON is 1, OFF is 0) diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c index 83a3a9bba2..95f8c04e4d 100644 --- a/board/freescale/t4qds/eth.c +++ b/board/freescale/t4qds/eth.c @@ -658,7 +658,7 @@ int board_eth_init(bd_t *bis) switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_XGMII: if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 == 57)) { - /* A fake PHY address to make U-boot happy */ + /* A fake PHY address to make U-Boot happy */ fm_info_set_phy_address(i, i); } else { lane = serdes_get_first_lane(FSL_SRDS_1, @@ -839,7 +839,7 @@ int board_eth_init(bd_t *bis) switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_XGMII: if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 == 57)) { - /* A fake PHY address to make U-boot happy */ + /* A fake PHY address to make U-Boot happy */ fm_info_set_phy_address(i, i); } else { lane = serdes_get_first_lane(FSL_SRDS_2, diff --git a/board/gateworks/gw_ventana/README b/board/gateworks/gw_ventana/README index 697e5c8bb4..9418907697 100644 --- a/board/gateworks/gw_ventana/README +++ b/board/gateworks/gw_ventana/README @@ -16,13 +16,13 @@ The i.MX6 has a BOOT ROM PPL (Primary Program Loader) which supports loading an executable image from various boot devices. The Gateworks Ventana board config uses an SPL build configuration. This -will build the following artifacts from u-boot source: +will build the following artifacts from U-Boot source: - SPL - Secondary Program Loader that the i.MX6 BOOT ROM (Primary Program Loader) boots. This detects CPU/DRAM configuration, configures The DRAM controller, loads u-boot.img from the detected boot device, and jumps to it. As this is booted from the PPL, it has an IVT/DCD table. - - u-boot.img - The main u-boot core which is u-boot.bin with a image header. + - u-boot.img - The main U-Boot core which is u-boot.bin with a image header. 2. Build @@ -71,15 +71,15 @@ kobs-ng init -v -x --search_exponent=1 SPL The kobs-ng application uses an imximage which contains the Image Vector Table (IVT) and Device Configuration Data (DCD) structures that the i.MX6 BOOT ROM requires to boot. The kobs-ng adds the Firmware Configuration Block (FCB) and -Discovered Bad Block Table (DBBT). The SPL build artifact from u-boot is +Discovered Bad Block Table (DBBT). The SPL build artifact from U-Boot is an imximage. -The u-boot.img, which is the non SPL u-boot binary appended to a u-boot image +The u-boot.img, which is the non SPL U-Boot binary appended to a U-Boot image header must be programmed in the NAND flash boot device at an offset hard coded in the SPL. For the Ventana boards, this has been chosen to be 14MB. -The image can be programmed from either u-boot or Linux: +The image can be programmed from either U-Boot or Linux: -u-boot: +U-Boot: Ventana > setenv mtdparts mtdparts=nand:14m(spl),2m(uboot),1m(env),-(rootfs) Ventana > tftp ${loadaddr} u-boot.img && nand erase.part uboot && \ nand write ${loadaddr} uboot ${filesize} @@ -104,7 +104,7 @@ More details about the i.MX6 BOOT ROM can be found in the IMX6 reference manual. When the IMX6 eFUSE settings have been factory programmed to boot from micro-SD the SPL will be loaded from offset 0x400 (1KB). Once the SPL is -booted, it will load and execute U-boot (u-boot.img) from offset 69KB +booted, it will load and execute U-Boot (u-boot.img) from offset 69KB on the micro-SD (defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR). While it is technically possible to enable the SPL to be able to load diff --git a/board/ibf-dsp561/Makefile b/board/ibf-dsp561/Makefile index 5b05ba8003..cbf16121df 100644 --- a/board/ibf-dsp561/Makefile +++ b/board/ibf-dsp561/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/ibf-dsp561/ibf-dsp561.c b/board/ibf-dsp561/ibf-dsp561.c index d2ac7a502b..8475fda1a4 100644 --- a/board/ibf-dsp561/ibf-dsp561.c +++ b/board/ibf-dsp561/ibf-dsp561.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2009 I-SYST. * diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c index e31331aec1..3a9e7807c6 100644 --- a/board/imgtec/malta/malta.c +++ b/board/imgtec/malta/malta.c @@ -93,7 +93,7 @@ int checkboard(void) { enum core_card core; - malta_lcd_puts("U-boot"); + malta_lcd_puts("U-Boot"); puts("Board: MIPS Malta"); core = malta_core_card(); diff --git a/board/ip04/Makefile b/board/ip04/Makefile index caba16f199..44fa684729 100644 --- a/board/ip04/Makefile +++ b/board/ip04/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2010 Analog Device Inc. # diff --git a/board/ip04/ip04.c b/board/ip04/ip04.c index 70765bce50..c7bc33434e 100644 --- a/board/ip04/ip04.c +++ b/board/ip04/ip04.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2007 David Rowe, * (c) 2006 Ivan Danov diff --git a/board/keymile/km83xx/README.kmeter1 b/board/keymile/km83xx/README.kmeter1 index 7f4fc999f8..b85d7764bc 100644 --- a/board/keymile/km83xx/README.kmeter1 +++ b/board/keymile/km83xx/README.kmeter1 @@ -60,7 +60,7 @@ Keymile kmeter1 Board Bytes transferred = 204204 (31dac hex) => -4.1 Reflash U-boot Image using U-boot +4.1 Reflash U-Boot Image using U-Boot => run update ..... done diff --git a/board/pr1/Makefile b/board/pr1/Makefile index 4f375a8b5c..8caa3601f4 100644 --- a/board/pr1/Makefile +++ b/board/pr1/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) Switchfin Org. # diff --git a/board/pr1/pr1.c b/board/pr1/pr1.c index bb907f3966..3fffabdefb 100644 --- a/board/pr1/pr1.c +++ b/board/pr1/pr1.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) Switchfin Org. * diff --git a/board/sbc8349/README b/board/sbc8349/README index e2d60cc530..3c142e0407 100644 --- a/board/sbc8349/README +++ b/board/sbc8349/README @@ -30,21 +30,21 @@ image. Restoring a corrupted or missing flash image: ============================================= -Note that U-boot versions up to and including 2009.06 had essentially -two copies of u-boot in flash; one at the very beginning, which set +Note that U-Boot versions up to and including 2009.06 had essentially +two copies of U-Boot in flash; one at the very beginning, which set the HRCW, and one at the very end, which was the image that was run. As of this point in time, the two have been combined into just one at the beginning of flash, which provides both the HRCW, and the image that is executed. This frees up the remainder of flash for other uses. -Use of the u-boot command "fli" will indicate what parts are in use. -Details for storing U-boot to flash using a Wind River ICE can be found +Use of the U-Boot command "fli" will indicate what parts are in use. +Details for storing U-Boot to flash using a Wind River ICE can be found on page 19 of the board manual (request ERG-00328-001). The following is a summary of that information: - Connect ICE and establish connection to it from WorkBench/OCD. - Ensure you have background mode (BKM) in the OCD terminal window. - Select the appropriate flash type (listed above) - - Prepare a u-boot image by using the Wind River Convert utility; + - Prepare a U-Boot image by using the Wind River Convert utility; by using "Convert and Add file" on the ELF file from your build. Convert from FF80_0000 to FFFF_FFFF (or to FF83_FFFF if you are trying to preserve your old environment settings and user flash). @@ -55,9 +55,9 @@ is a summary of that information: Note that some versions of the register files used with Workbench would zero some TSEC registers, which inhibits ethernet operation -by u-boot when this register file is played to the target. Using +by U-Boot when this register file is played to the target. Using "INN" in the OCD terminal window instead of "IN" before the "GO" -will not play the register file, and allow u-boot to use the TSEC +will not play the register file, and allow U-Boot to use the TSEC interface while executed from the ICE "GO" command. Alternatively, you can locate the register file which will be named @@ -74,7 +74,7 @@ as u-boot.bin. Updating U-Boot with U-Boot: ============================ -This procedure is very similar to other boards that have u-boot installed. +This procedure is very similar to other boards that have U-Boot installed. Assuming that the network has been configured, and that the new u-boot.bin has been copied to the TFTP server, the commands are: @@ -98,7 +98,7 @@ There are three configuration choices: The 1st does not enable CONFIG_PCI, and assumes that the PCI slot will be left empty (M66EN high), and so the board will operate with -a base clock of 66MHz. Note that you need both PCI enabled in u-boot +a base clock of 66MHz. Note that you need both PCI enabled in U-Boot and linux in order to have functional PCI under linux. The only reason for choosing to not enable PCI would be if you had a very early (rev 1.0) CPU with possible PCI issues. diff --git a/board/sbc8548/README b/board/sbc8548/README index feac5e3e63..0def245bd9 100644 --- a/board/sbc8548/README +++ b/board/sbc8548/README @@ -7,10 +7,10 @@ memory. It also has 128MB SDRAM 100MHz LBC memory, with both a PCI-e, and a PCI-X slot, dual mini-DB9 for UART, and dual RJ-45 for eTSEC ethernet connections. -U-boot Configuration: +U-Boot Configuration: ===================== -The following possible u-boot configuration targets are available: +The following possible U-Boot configuration targets are available: 1) sbc8548_config 2) sbc8548_PCI_33_config @@ -23,7 +23,7 @@ of each choice are listed below. Choice #1 does not enable CONFIG_PCI, and assumes that the PCI slot will be left empty (M66EN high), and so the board will operate with -a base clock of 66MHz. Note that you need both PCI enabled in u-boot +a base clock of 66MHz. Note that you need both PCI enabled in U-Boot and linux in order to have functional PCI under linux. The second enables PCI support and builds for a 33MHz clock rate. Note @@ -100,13 +100,13 @@ from the board's socket to resolve the above i2c address overlap issue and allow SPD autodetection of RAM to work. -Updating U-boot with U-boot: +Updating U-Boot with U-Boot: ============================ -Note that versions of u-boot up to and including 2009.08 had u-boot stored +Note that versions of U-Boot up to and including 2009.08 had U-Boot stored at 0xfff8_0000 -> 0xffff_ffff (512k). Currently it is being stored from 0xfffa_0000 -> 0xffff_ffff (384k). If you use an old macro/script to -update u-boot with u-boot and it uses the old address, you will render +update U-Boot with U-Boot and it uses the old address, you will render your board inoperable, and you will require JTAG recovery. The following steps list how to update with the current address: @@ -120,11 +120,11 @@ The following steps list how to update with the current address: protect on all The "md" steps in the above are just a precautionary step that allow -you to confirm the u-boot version that was downloaded, and then confirm +you to confirm the U-Boot version that was downloaded, and then confirm that it was copied to flash. The above assumes that you are using the default board settings which -have u-boot in the 8MB flash, tied to /CS0. +have U-Boot in the 8MB flash, tied to /CS0. If you are running the default 8MB /CS0 settings but want to store an image in the SODIMM that is built with CONFIG_SYS_ALT_BOOT enabled, @@ -139,7 +139,7 @@ image in the SODIMM that is built with CONFIG_SYS_ALT_BOOT enabled, protect on all Finally, if you are running the alternate 64MB /CS0 settings and want -to update the in-use u-boot image, then (again with CONFIG_SYS_ALT_BOOT +to update the in-use U-Boot image, then (again with CONFIG_SYS_ALT_BOOT enabled) the steps will become: tftp u-boot.bin @@ -155,7 +155,7 @@ Hardware Reference: =================== The following contains some summary information on hardware settings -that are relevant to u-boot, based on the board manual. For the +that are relevant to U-Boot, based on the board manual. For the most up to date and complete details of the board, please request the reference manual ERG-00327-001.pdf from www.windriver.com @@ -166,7 +166,7 @@ Sodimm flash: intel V28F128Jx, 16384x8 (4 devices) at 0xfb80_0000 Note that this address reflects the default setting for the JTAG debugging tools, but since the alignment is - rather inconvenient, u-boot puts it at 0xec00_0000. + rather inconvenient, U-Boot puts it at 0xec00_0000. Jumpers: @@ -193,7 +193,7 @@ is jumpered parallel to the LBC-SDRAM, then /CS0 is for the SODIMM flash and /CS6 is for the boot flash. Note that in this alternate setting, you also need to switch SW2.8 to ON. See the setting CONFIG_SYS_ALT_BOOT if you want to use this setting -and boot u-boot from the 64MB SODIMM +and boot U-Boot from the 64MB SODIMM Switches: @@ -257,7 +257,7 @@ fb80_0000 ff7f_ffff CS6 32 SODIMM flash (64MB) [*] ff80_0000 ffff_ffff CS0 8 Boot flash (8MB) [*] fb80 represents the default programmed by WR JTAG register files, - but u-boot places the flash at either ec00 or fc00 based on JP12. + but U-Boot places the flash at either ec00 or fc00 based on JP12. The EPLD on CS5 demuxes the following devices at the following offsets: diff --git a/board/sbc8641d/README b/board/sbc8641d/README index d07f1ccf7c..4999b7763c 100644 --- a/board/sbc8641d/README +++ b/board/sbc8641d/README @@ -30,15 +30,15 @@ PCI: 4. Reflashing U-Boot -------------------- The board has two independent flash devices which can be used for dual -booting, or for u-boot backup and recovery. A two pin jumper on the +booting, or for U-Boot backup and recovery. A two pin jumper on the three pin JP10 determines which device is attached to /CS0 line. -Assuming one device has a functional u-boot, and the other device has +Assuming one device has a functional U-Boot, and the other device has a recently installed non-functional image, to perform a recovery from that non-functional image goes essentially as follows: a) power down the board and jumper JP10 to select the functional image. -b) power on the board and let it get to u-boot prompt. +b) power on the board and let it get to U-Boot prompt. c) while on, using static precautions, move JP10 back to the failed image. d) use "md fff00000" to confirm you are looking at the failed image e) turn off write protect with "prot off all" diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c index ea1d4b8e49..e7523f168b 100644 --- a/board/seco/mx6quq7/mx6quq7.c +++ b/board/seco/mx6quq7/mx6quq7.c @@ -103,7 +103,7 @@ int board_mmc_init(bd_t *bis) /* * Following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 eMMC on Board * mmc1 Ext SD */ diff --git a/board/solidrun/mx6cuboxi/README b/board/solidrun/mx6cuboxi/README index b417ff0334..5d0a45d929 100644 --- a/board/solidrun/mx6cuboxi/README +++ b/board/solidrun/mx6cuboxi/README @@ -1,7 +1,7 @@ -How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i +How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i ----------------------------------------------------------- -- Build U-boot for Hummingboard/Cubox-i: +- Build U-Boot for Hummingboard/Cubox-i: $ make mrproper $ make mx6cuboxi_defconfig @@ -17,5 +17,5 @@ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync -- Insert the SD card in the board, power it up and U-boot messages should +- Insert the SD card in the board, power it up and U-Boot messages should come up. diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c index 0b509b6dd9..7707cf5595 100644 --- a/board/tbs/tbs2910/tbs2910.c +++ b/board/tbs/tbs2910/tbs2910.c @@ -220,7 +220,7 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { /* - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 SD2 * mmc1 SD3 * mmc2 eMMC diff --git a/board/tcm-bf518/Makefile b/board/tcm-bf518/Makefile index 2e029f5ce8..1ce8f64a08 100644 --- a/board/tcm-bf518/Makefile +++ b/board/tcm-bf518/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/tcm-bf518/tcm-bf518.c b/board/tcm-bf518/tcm-bf518.c index 4348678aeb..7923eae5d5 100644 --- a/board/tcm-bf518/tcm-bf518.c +++ b/board/tcm-bf518/tcm-bf518.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2009 Analog Devices Inc. * diff --git a/board/tcm-bf537/Makefile b/board/tcm-bf537/Makefile index 93a01e4a3c..0fe25e80dc 100644 --- a/board/tcm-bf537/Makefile +++ b/board/tcm-bf537/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/tcm-bf537/tcm-bf537.c b/board/tcm-bf537/tcm-bf537.c index 2cf70cab15..19df51adab 100644 --- a/board/tcm-bf537/tcm-bf537.c +++ b/board/tcm-bf537/tcm-bf537.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README index 0fe5c3b9c3..05baff6e33 100644 --- a/board/ti/ks2_evm/README +++ b/board/ti/ks2_evm/README @@ -3,7 +3,7 @@ U-Boot port for Texas Instruments Keystone II EVM boards Author: Murali Karicheri -This README has information on the u-boot port for K2HK, K2E, and K2L EVM boards. +This README has information on the U-Boot port for K2HK, K2E, and K2L EVM boards. Documentation for this board can be found at http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html @@ -23,7 +23,7 @@ The K2L SoC details are available at Board configuration: ==================== -Some of the peripherals that are configured by u-boot +Some of the peripherals that are configured by U-Boot +------+-------+-------+-----------+-----------+-------+-------+----+ | |DDR3 |NAND |MSM SRAM |ETH ports |UART |I2C |SPI | +------+-------+-------+-----------+-----------+-------+-------+----+ @@ -37,7 +37,7 @@ There are only 2 eth port installed on the boards. There are separate PLLs to drive clocks to Tetris ARM and Peripherals. To bring up SMP Linux on this board, there is a boot monitor code that will be installed in MSMC SRAM. There is command available -to install this image from u-boot. +to install this image from U-Boot. The port related files can be found at following folders keystone2 SoC related files: arch/arm/cpu/armv7/keystone/ @@ -48,7 +48,7 @@ include/configs/k2hk_evm.h include/configs/k2e_evm.h include/configs/k2l_evm.h -As u-boot is migrating to Kconfig there is also board defconfig files +As U-Boot is migrating to Kconfig there is also board defconfig files configs/k2e_evm_defconfig configs/k2hk_evm_defconfig configs/k2l_evm_defconfig @@ -80,7 +80,7 @@ Need Code Composer Studio (CCS) installed on a PC to load and run u-boot-dtb.bin on EVM. See instructions at below link for installing CCS on a Windows PC. http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Getting_Started# Installing_Code_Composer_Studio -Use u-boot-dtb.bin from the build folder for loading and running u-boot binary +Use u-boot-dtb.bin from the build folder for loading and running U-Boot binary on EVM. Follow instructions at K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup @@ -94,7 +94,7 @@ Start CCS on a Windows machine and Launch Target configuration as instructed at http://processors.wiki.ti.com/index.php/ MCSDK_UG_Chapter_Exploring#Loading_and_Running_U-Boot_on_EVM_through_CCS. The instructions provided in the above link uses a script for -loading the u-boot binary on the target EVM. Instead do the following:- +loading the U-Boot binary on the target EVM. Instead do the following:- 1. Right click to "Texas Instruments XDS2xx USB Emulator_0/CortexA15_1 core (D is connected: Unknown)" at the debug window (This is created once Target @@ -126,41 +126,41 @@ SPI NOR Flash programming instructions U-Boot image can be flashed to first 512KB of the NOR flash using following instructions: -1. Start CCS and run U-boot as described above. +1. Start CCS and run U-Boot as described above. 2. Suspend Target. Select Run -> Suspend from top level menu CortexA15_1 (Free Running)" 3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000 through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E/K2L EVM using CCS", but using address 0x87000000. -4. Free Run the target as described earlier (step 4) to get u-boot prompt -5. At the U-Boot console type following to setup u-boot environment variables. +4. Free Run the target as described earlier (step 4) to get U-Boot prompt +5. At the U-Boot console type following to setup U-Boot environment variables. setenv addr_uboot 0x87000000 setenv filesize run burn_uboot_spi - Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch + Once U-Boot prompt is available, Power OFF the EVM. Set the SW1 dip switch to "SPI Little Endian Boot mode" as per instruction at http://processors.wiki.ti.com/index.php/*_Hardware_Setup. -6. Power ON the EVM. The EVM now boots with u-boot image on the NOR flash. +6. Power ON the EVM. The EVM now boots with U-Boot image on the NOR flash. AEMIF NAND Flash programming instructions ====================================== U-Boot image can be flashed to first 1024KB of the NAND flash using following instructions: -1. Start CCS and run U-boot as described above. +1. Start CCS and run U-Boot as described above. 2. Suspend Target. Select Run -> Suspend from top level menu CortexA15_1 (Free Running)" 3. Load MLO binary from build folder on to DDR address 0x87000000 through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM using CCS", but using address 0x87000000. -4. Free Run the target as described earlier (step 4) to get u-boot prompt -5. At the U-Boot console type following to setup u-boot environment variables. +4. Free Run the target as described earlier (step 4) to get U-Boot prompt +5. At the U-Boot console type following to setup U-Boot environment variables. setenv filesize run burn_uboot_nand - Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch + Once U-Boot prompt is available, Power OFF the EVM. Set the SW1 dip switch to "ARM NAND Boot mode" as per instruction at http://processors.wiki.ti.com/index.php/*_Hardware_Setup. -6. Power ON the EVM. The EVM now boots with u-boot image on the NAND flash. +6. Power ON the EVM. The EVM now boots with U-Boot image on the NAND flash. Load and Run U-Boot on keystone EVMs using UART download ======================================================== @@ -171,4 +171,4 @@ Open BMC and regular UART terminals. 2. Using BMC terminal set the ARM-UART bootmode and reboot the EVM BMC> bootmode #4 MBC> reboot -3. When xmodem is complete you should see the u-boot starts on the UART port +3. When xmodem is complete you should see the U-Boot starts on the UART port diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c index 8656782d86..7fc57da132 100644 --- a/board/tqc/tqma6/tqma6.c +++ b/board/tqc/tqma6/tqma6.c @@ -77,7 +77,7 @@ static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = { /* * According to board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 eMMC (SD3) on TQMa6 * mmc1 .. n optional slots used on baseboard */ diff --git a/board/wandboard/README b/board/wandboard/README index c6c01322b6..6345416b2f 100644 --- a/board/wandboard/README +++ b/board/wandboard/README @@ -9,7 +9,7 @@ SoCs: mx6 quad, mx6 dual lite and mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ -Building U-boot for Wandboard +Building U-Boot for Wandboard ----------------------------- To build U-Boot for the Wandboard: @@ -17,7 +17,7 @@ To build U-Boot for the Wandboard: $ make wandboard_config $ make -Flashing U-boot into the SD card +Flashing U-Boot into the SD card -------------------------------- - After the 'make' command completes, the generated 'SPL' binary must be @@ -36,4 +36,4 @@ as the mx6 processor) - Connect the serial cable to the host PC -- Power up the board and U-boot messages will appear in the serial console. +- Power up the board and U-Boot messages will appear in the serial console. diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index ac001edf3a..4ce74cd971 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -155,7 +155,7 @@ int board_mmc_init(bd_t *bis) /* * Following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 SOM MicroSD * mmc1 Carrier board MicroSD */ diff --git a/board/warp/README b/board/warp/README index 22f9055eb6..3cfd22ec76 100644 --- a/board/warp/README +++ b/board/warp/README @@ -1,4 +1,4 @@ -How to Update U-boot on Warp board +How to Update U-Boot on Warp board ---------------------------------- Required software on the host PC: @@ -7,13 +7,13 @@ Required software on the host PC: - dfu-util: http://dfu-util.sourceforge.net/releases/ -Build U-boot for Warp: +Build U-Boot for Warp: $ make mrproper $ make warp_config $ make -This will generate the U-boot binary called u-boot.imx. +This will generate the U-Boot binary called u-boot.imx. Put warp board in USB download mode @@ -29,7 +29,7 @@ Load u-boot.imx via USB: $ sudo ./imx_usb u-boot.imx -Then U-boot should start and its messages will appear in the console program. +Then U-Boot should start and its messages will appear in the console program. Use the default environment variables: @@ -43,7 +43,7 @@ Transfer u-boot.imx that will be flashed into the eMMC: $ sudo dfu-util -D u-boot.imx -a boot -Then on the U-boot prompt the following message should be seen after a +Then on the U-Boot prompt the following message should be seen after a successful upgrade: #DOWNLOAD ... OK @@ -53,4 +53,4 @@ Remove power from the warp board. Put warp board into normal boot mode -Power up the board and the new updated U-boot should boot from eMMC +Power up the board and the new updated U-Boot should boot from eMMC diff --git a/cmd/bootldr.c b/cmd/bootldr.c index bc5c1f95ea..38b3b2f8d7 100644 --- a/cmd/bootldr.c +++ b/cmd/bootldr.c @@ -1,5 +1,5 @@ /* - * U-boot - bootldr.c + * U-Boot - bootldr.c * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/cmd/cramfs.c b/cmd/cramfs.c index 1d31326bd6..270701b99d 100644 --- a/cmd/cramfs.c +++ b/cmd/cramfs.c @@ -77,7 +77,7 @@ extern int cramfs_ls (struct part_info *info, char *filename); extern int cramfs_info (struct part_info *info); /***************************************************/ -/* U-boot commands */ +/* U-Boot commands */ /***************************************************/ /** diff --git a/cmd/jffs2.c b/cmd/jffs2.c index bce098315e..0b2eefa195 100644 --- a/cmd/jffs2.c +++ b/cmd/jffs2.c @@ -456,7 +456,7 @@ static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int pa } /***************************************************/ -/* U-boot commands */ +/* U-Boot commands */ /***************************************************/ /** diff --git a/cmd/ldrinfo.c b/cmd/ldrinfo.c index 2aa56bdb62..2b49297327 100644 --- a/cmd/ldrinfo.c +++ b/cmd/ldrinfo.c @@ -1,5 +1,5 @@ /* - * U-boot - ldrinfo + * U-Boot - ldrinfo * * Copyright (c) 2010 Analog Devices Inc. * diff --git a/cmd/mtdparts.c b/cmd/mtdparts.c index dab195841a..86a4689616 100644 --- a/cmd/mtdparts.c +++ b/cmd/mtdparts.c @@ -1877,7 +1877,7 @@ static struct part_info* mtd_part_info(struct mtd_device *dev, unsigned int part } /***************************************************/ -/* U-boot commands */ +/* U-Boot commands */ /***************************************************/ /* command line only */ /** diff --git a/cmd/pxe.c b/cmd/pxe.c index 080b3760de..9434a18177 100644 --- a/cmd/pxe.c +++ b/cmd/pxe.c @@ -571,7 +571,7 @@ static void label_print(void *data) /* * Boot a label that specified 'localboot'. This requires that the 'localcmd' - * environment variable is defined. Its contents will be executed as U-boot + * environment variable is defined. Its contents will be executed as U-Boot * command. If the label specified an 'append' line, its contents will be * used to overwrite the contents of the 'bootargs' environment variable prior * to running 'localcmd'. @@ -1438,7 +1438,7 @@ static struct pxe_menu *parse_pxefile(cmd_tbl_t *cmdtp, unsigned long menucfg) } /* - * Converts a pxe_menu struct into a menu struct for use with U-boot's generic + * Converts a pxe_menu struct into a menu struct for use with U-Boot's generic * menu code. */ static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg) diff --git a/cmd/spibootldr.c b/cmd/spibootldr.c index ca76dde1dd..acbb0f6969 100644 --- a/cmd/spibootldr.c +++ b/cmd/spibootldr.c @@ -1,5 +1,5 @@ /* - * U-boot - spibootldr.c + * U-Boot - spibootldr.c * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/common/image-fdt.c b/common/image-fdt.c index 5e4e5bd914..79fa65563f 100644 --- a/common/image-fdt.c +++ b/common/image-fdt.c @@ -450,7 +450,7 @@ error: * addresses of some of the devices in the device tree are compared with the * actual addresses at which U-Boot has placed them. * - * Returns 1 on success, 0 on failure. If 0 is returned, U-boot will halt the + * Returns 1 on success, 0 on failure. If 0 is returned, U-Boot will halt the * boot process. */ __weak int ft_verify_fdt(void *fdt) diff --git a/common/image.c b/common/image.c index f4a1dc8e25..75b1104bf3 100644 --- a/common/image.c +++ b/common/image.c @@ -1265,7 +1265,7 @@ int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images, * @cmd_end: pointer to a ulong variable, will hold cmdline end * * boot_get_cmdline() allocates space for kernel command line below - * BOOTMAPSZ + getenv_bootm_low() address. If "bootargs" U-boot environemnt + * BOOTMAPSZ + getenv_bootm_low() address. If "bootargs" U-Boot environemnt * variable is present its contents is copied to allocated kernel * command line. * diff --git a/common/kgdb_stubs.c b/common/kgdb_stubs.c index 19b0c1824d..5278209909 100644 --- a/common/kgdb_stubs.c +++ b/common/kgdb_stubs.c @@ -1,5 +1,5 @@ /* - * U-boot - stub functions for common kgdb code, + * U-Boot - stub functions for common kgdb code, * can be overridden in board specific files * * Copyright 2009 Analog Devices Inc. diff --git a/doc/README.440-DDR-performance b/doc/README.440-DDR-performance index 17bc74764b..66b97bc9b5 100644 --- a/doc/README.440-DDR-performance +++ b/doc/README.440-DDR-performance @@ -9,7 +9,7 @@ performance changes: ---------------------------------------- -SDRAM0_CFG0[PMU] = 1 (U-boot default for Bamboo, Yosemite and Yellowstone) +SDRAM0_CFG0[PMU] = 1 (U-Boot default for Bamboo, Yosemite and Yellowstone) ---------------------------------------- Stream benchmark results ------------------------------------------------------------- diff --git a/doc/README.arm64 b/doc/README.arm64 index f32108feb7..de669cb6d7 100644 --- a/doc/README.arm64 +++ b/doc/README.arm64 @@ -1,20 +1,20 @@ -U-boot for arm64 +U-Boot for arm64 Summary ======= -No hardware platform of arm64 is available now. The u-boot is +No hardware platform of arm64 is available now. The U-Boot is simulated on Foundation Model and Fast Model for ARMv8. Notes ===== -1. Currenly, u-boot run at the highest exception level processor +1. Currenly, U-Boot run at the highest exception level processor supported and jump to EL2 or optionally EL1 before enter OS. -2. U-boot for arm64 is compiled with AArch64-gcc. AArch64-gcc +2. U-Boot for arm64 is compiled with AArch64-gcc. AArch64-gcc use rela relocation format, a tool(tools/relocate-rela) by Scott Wood is used to encode the initial addend of rela to u-boot.bin. After running, - the u-boot will be relocated to destination again. + the U-Boot will be relocated to destination again. 3. Fdt should be placed at a 2-megabyte boundary and within the first 512 megabytes from the start of the kernel image. So, fdt_high should be diff --git a/doc/README.b4860qds b/doc/README.b4860qds index 6fcc3bd6e8..889c8a9842 100644 --- a/doc/README.b4860qds +++ b/doc/README.b4860qds @@ -227,15 +227,15 @@ Start Address End Address Description Size NOR Flash memory Map on B4860 and B4420QDS ------------------------------------------ Start End Definition Size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xEF300000 0xEFEFFFFF rootfs (alternate bank) 12MB 0xEE800000 0xEE8FFFFF device tree (alternate bank) 1MB 0xEE020000 0xEE6FFFFF Linux.uImage (alternate bank) 6MB+896KB 0xEE000000 0xEE01FFFF RCW (alternate bank) 128KB -0xEDF40000 0xEDFFFFFF u-boot (alternate bank) 768KB -0xEDF20000 0xEDF3FFFF u-boot env (alternate bank) 128KB +0xEDF40000 0xEDFFFFFF U-Boot (alternate bank) 768KB +0xEDF20000 0xEDF3FFFF U-Boot env (alternate bank) 128KB 0xEDF00000 0xEDF1FFFF FMAN ucode (alternate bank) 128KB 0xED300000 0xEDEFFFFF rootfs (current bank) 12MB 0xEC800000 0xEC8FFFFF device tree (current bank) 1MB @@ -246,7 +246,7 @@ Various Software configurations/environment variables/commands -------------------------------------------------------------- The below commands apply to both B4860QDS and B4420QDS. -1. U-boot environment variable hwconfig +1. U-Boot environment variable hwconfig The default hwconfig is: hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: dr_mode=host,phy_type=ulpi @@ -267,7 +267,7 @@ The below commands apply to both B4860QDS and B4420QDS. 4. To change personality of board For changing personality from B4860 to B4420 1)Boot from vbank0 - 2)Flash vbank2 with b4420 rcw and u-boot + 2)Flash vbank2 with b4420 rcw and U-Boot 3)Give following commands to uboot prompt => mw.b ffdf0040 0x30; => mw.b ffdf0010 0x00; @@ -309,7 +309,7 @@ The below commands apply to both B4860QDS and B4420QDS. When using [DEFAULT] RCW, which including 2 * 1G SGMII on board and 2 * 1G SGMII on SGMII riser card. - Under U-boot these network interfaces are recognized as: + Under U-Boot these network interfaces are recognized as: FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5 and FM1@DTSEC6. On Linux the interfaces are renamed as: @@ -322,7 +322,7 @@ The below commands apply to both B4860QDS and B4420QDS. Serdes protocosl tested: 0x18, 0x9e (serdes1, serdes2) - Under U-boot these network interfaces are recognized as: + Under U-Boot these network interfaces are recognized as: FM1@DTSEC3, FM1@DTSEC4 and e1000#0. On Linux the interfaces are renamed as: @@ -333,8 +333,8 @@ NAND boot with 2 Stage boot loader ---------------------------------- PBL initialise the internal SRAM and copy SPL(160KB) in SRAM. SPL further initialise DDR using SPD and environment variables and copy -u-boot(768 KB) from flash to DDR. -Finally SPL transer control to u-boot for futher booting. +U-Boot(768 KB) from flash to DDR. +Finally SPL transer control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -355,12 +355,12 @@ SPL has following features: ----------------------------------------------- STACK | 0xFFFD8000 (22KB) | ----------------------------------------------- - U-boot SPL | 0xFFFD8000 (160KB) | + U-Boot SPL | 0xFFFD8000 (160KB) | ----------------------------------------------- NAND Flash memory Map on B4860 and B4420QDS ------------------------------------------ Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB -0x140000 0x15FFFF u-boot env 128KB +0x000000 0x0FFFFF U-Boot 1MB +0x140000 0x15FFFF U-Boot env 128KB 0x1A0000 0x1BFFFF FMAN Ucode 128KB diff --git a/doc/README.clang b/doc/README.clang index fe36909449..7ce5ae4867 100644 --- a/doc/README.clang +++ b/doc/README.clang @@ -1,4 +1,4 @@ -The biggest problem when trying to compile U-boot with clang is that +The biggest problem when trying to compile U-Boot with clang is that almost all archs rely on storing gd in a global register and clang user manual states: "clang does not support global register variables; this is unlikely to be implemented soon because it requires additional LLVM @@ -17,9 +17,9 @@ will also fail to compile, but there is in no strict reason to do so in the ARM world, since crt0.S takes care of this. These assignments can be avoided by changing the init calls but this is not in mainline yet. -NOTE: without the -mllvm -arm-use-movt=0 flags u-boot will compile +NOTE: without the -mllvm -arm-use-movt=0 flags U-Boot will compile fine, but llvm might hardcode addresses in movw / movt pairs, which -cannot be relocated and u-boot will fail at runtime. +cannot be relocated and U-Boot will fail at runtime. Debian (based) -------------- @@ -45,7 +45,7 @@ export CROSS_COMPILE=arm-gnueabi-freebsd- gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_defconfig gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" -j8 -Given that u-boot will default to gcc, above commands can be +Given that U-Boot will default to gcc, above commands can be simplified with a simple wrapper script, listed below. /usr/local/bin/arm-gnueabi-freebsd-gcc diff --git a/doc/README.fec_mxc b/doc/README.fec_mxc index 30e05da574..ed7e47d728 100644 --- a/doc/README.fec_mxc +++ b/doc/README.fec_mxc @@ -1,4 +1,4 @@ -U-boot config options used in fec_mxc.c +U-Boot config options used in fec_mxc.c CONFIG_FEC_MXC Selects fec_mxc.c to be compiled into u-boot. Can read out the diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr index 1243a12227..cd71ec8e16 100644 --- a/doc/README.fsl-ddr +++ b/doc/README.fsl-ddr @@ -61,7 +61,7 @@ The ways to configure the ddr interleaving mode "hwconfig=fsl_ddr:ctlr_intlv=bank" \ ...... -2. Run u-boot "setenv" command to configure the memory interleaving mode. +2. Run U-Boot "setenv" command to configure the memory interleaving mode. Either numerical or string value is accepted. # disable memory controller interleaving @@ -125,7 +125,7 @@ hwconfig=fsl_ddr:ecc=off Memory testing options for mpc85xx ================================== -1. Memory test can be done once U-boot prompt comes up using mtest, or +1. Memory test can be done once U-Boot prompt comes up using mtest, or 2. Memory test can be done with Power-On-Self-Test function, activated at compile time. @@ -267,7 +267,7 @@ For DDR parameter tuning up and debugging, the interactive DDR debugger can be activated by setting the environment variable "ddr_interactive" to any value. (The value of ddr_interactive may have a meaning in the future, but, for now, the presence of the variable will cause the debugger to run.) Once -activated, U-boot will show the prompt "FSL DDR>" before enabling the DDR +activated, U-Boot will show the prompt "FSL DDR>" before enabling the DDR controller. The available commands are printed by typing "help". Another way to enter the interactive DDR debugger without setting the @@ -275,7 +275,7 @@ environment variable is to send the 'd' character early during the boot process. To save booting time, no additional delay is added, so the window to send the key press is very short -- basically, it is the time before the memory controller code starts to run. For example, when rebooting from -within u-boot, the user must press 'd' IMMEDIATELY after hitting enter to +within U-Boot, the user must press 'd' IMMEDIATELY after hitting enter to initiate a 'reset' command. In case of power on/reset, the user can hold down the 'd' key while applying power or hitting the board's reset button. @@ -341,7 +341,7 @@ help no argument - print a list of all commands go - no argument - program memory controller(s) and continue with U-boot + no argument - program memory controller(s) and continue with U-Boot Examples of debugging flow diff --git a/doc/README.imx6 b/doc/README.imx6 index 7c9a4ac5c6..1823fb2c9d 100644 --- a/doc/README.imx6 +++ b/doc/README.imx6 @@ -37,7 +37,7 @@ As the fuses are arranged in banks of 8 words: bank = 4 word = 2 -And the U-boot command would be: +And the U-Boot command would be: => fuse read 4 2 Reading bank 4: @@ -58,7 +58,7 @@ As the fuses are arranged in banks of 8 words: bank = 4 word = 3 -And the U-boot command would be: +And the U-Boot command would be: => fuse read 4 3 Reading bank 4: diff --git a/doc/README.m68k b/doc/README.m68k index c85febc1f1..9d5c08f768 100644 --- a/doc/README.m68k +++ b/doc/README.m68k @@ -17,7 +17,7 @@ Motorola M68K series of CPUs. Bernhard Kuhn ported U-Boot 0.4.0 to the Motorola Coldfire architecture. The patches of Bernhard support the MCF5272 and MCF5282. A great disadvantage of these patches was that they needed -a pre-bootloader to start u-boot. Because of this, a new port was +a pre-bootloader to start U-Boot. Because of this, a new port was created which no longer needs a first stage booter. Although this port is intended to cover all M68k processors, only @@ -53,8 +53,8 @@ To configure the board, type: make M5272C3_config U-Boot Memory Map: ------------------ -0xffe00000 - 0xffe3ffff u-boot -0xffe04000 - 0xffe05fff environment (embedded in u-boot!) +0xffe00000 - 0xffe3ffff U-Boot +0xffe04000 - 0xffe05fff environment (embedded in U-Boot!) 0xffe40000 - 0xffffffff free for linux/applications @@ -65,13 +65,13 @@ Board specific code is located in: board/m5282evb To configure the board, type: make M5272C3_config At the moment the code isn't fully implemented and still needs a pre-loader! -The preloader must initialize the processor and then start u-boot. The board +The preloader must initialize the processor and then start U-Boot. The board must be configured for a pre-loader (see 4.1) For the preloader, please see http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html -U-boot is configured to run at 0x20000 at default. This can be configured by +U-Boot is configured to run at 0x20000 at default. This can be configured by change CONFIG_SYS_TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in include/configs/M5282EVB.h. @@ -91,10 +91,10 @@ make EB+MCF-EV123_internal_config for internal FLASH 4.1 Configuration to use a pre-loader ------------------------------------- -If u-boot should be loaded to RAM and started by a pre-loader +If U-Boot should be loaded to RAM and started by a pre-loader CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the initial vector table and basic processor initialization will not -be compiled in. The start address of u-boot must be adjusted in +be compiled in. The start address of U-Boot must be adjusted in the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile (CONFIG_SYS_TEXT_BASE) to the load address. @@ -105,7 +105,7 @@ CONFIG_MCF52x2 -- defined for all MCF52x2 CPUs CONFIG_M5272 -- defined for all Motorola MCF5272 CPUs CONFIG_MONITOR_IS_IN_RAM - -- defined if u-boot is loaded by a pre-loader + -- defined if U-Boot is loaded by a pre-loader CONFIG_SYS_MBAR -- defines the base address of the MCF5272 configuration registers CONFIG_SYS_INIT_RAM_ADDR @@ -130,7 +130,7 @@ CONFIG_MCF52x2 -- defined for all MCF52x2 CPUs CONFIG_M5282 -- defined for all Motorola MCF5282 CPUs CONFIG_MONITOR_IS_IN_RAM - -- defined if u-boot is loaded by a pre-loader + -- defined if U-Boot is loaded by a pre-loader CONFIG_SYS_MBAR -- defines the base address of the MCF5282 internal register space CONFIG_SYS_INIT_RAM_ADDR diff --git a/doc/README.malta b/doc/README.malta index c8db8a0c39..8614696a57 100644 --- a/doc/README.malta +++ b/doc/README.malta @@ -13,4 +13,4 @@ How to flash using a MIPS Navigator Probe: reset flash-boot /path/to/u-boot/u-boot.bin - - You should now be able to reboot your Malta to a U-boot shell. + - You should now be able to reboot your Malta to a U-Boot shell. diff --git a/doc/README.menu b/doc/README.menu index ad520ab3aa..cf142314d3 100644 --- a/doc/README.menu +++ b/doc/README.menu @@ -4,7 +4,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -U-boot provides a set of interfaces for creating and using simple, text +U-Boot provides a set of interfaces for creating and using simple, text based menus. Menus are displayed as lists of labeled entries on the console, and an entry can be selected by entering its label. diff --git a/doc/README.mpc83xxads b/doc/README.mpc83xxads index d4561034b8..7a8b706a78 100644 --- a/doc/README.mpc83xxads +++ b/doc/README.mpc83xxads @@ -80,7 +80,7 @@ Freescale MPC83xx ADS Boards tftp 10000 u-boot.bin -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot tftp 10000 u-boot.bin protect off fe000000 fe09ffff diff --git a/doc/README.mpc85xx-spin-table b/doc/README.mpc85xx-spin-table index 8da768a2a6..72c7bd7b5d 100644 --- a/doc/README.mpc85xx-spin-table +++ b/doc/README.mpc85xx-spin-table @@ -1,7 +1,7 @@ Spin table in cache ===================================== As specified by ePAPR v1.1, the spin table needs to be in cached memory. After -DDR is initialized and U-boot relocates itself into DDR, the spin table is +DDR is initialized and U-Boot relocates itself into DDR, the spin table is accessible for core 0. It is part of release.S, within 4KB range after __secondary_start_page. For other cores to use the spin table, the booting process is described below: diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads index 28bbcbe095..ef92739756 100644 --- a/doc/README.mpc85xxads +++ b/doc/README.mpc85xxads @@ -107,7 +107,7 @@ Updated 13-July-2004 Jon Loeliger 2. MEMORY MAP TO WORK WITH LINUX KERNEL 2.1. For the initial bringup, we adopted a consistent memory scheme - between u-boot and linux kernel, you can customize it based on your + between U-Boot and linux kernel, you can customize it based on your system requirements: 0x0000_0000 0x7fff_ffff DDR 2G @@ -192,7 +192,7 @@ straightforward. and future revisions of 8540/8560. -4.4 Reflash U-boot Image using U-boot +4.4 Reflash U-Boot Image using U-Boot tftp 10000 u-boot.bin protect off fff80000 ffffffff diff --git a/doc/README.mpc85xxcds b/doc/README.mpc85xxcds index bc5db0ca8e..79d71cb37f 100644 --- a/doc/README.mpc85xxcds +++ b/doc/README.mpc85xxcds @@ -25,7 +25,7 @@ The 85xx CDS code base is known to compile using: Memory Map ---------- -The memory map for u-boot and linux has been extended w.r.t. the ADS +The memory map for U-Boot and linux has been extended w.r.t. the ADS platform to allow for utilization of all 85xx CDS devices. The memory map is setup for linux to operate properly. The linux source when configured for MPC85xx CDS has been updated to reflect the new memory @@ -55,14 +55,14 @@ The CDS board has two flash banks, each 8MB in size (2^23 = 0x00800000). There is a switch which allows the boot-bank to be selected. The switch settings for updating flash are given below. -The u-boot commands for copying the boot-bank into the secondary bank are +The U-Boot commands for copying the boot-bank into the secondary bank are as follows: erase ff780000 ff7fffff cp.b fff80000 ff780000 80000 -U-boot/kermit commands for downloading an image, then copying +U-Boot/kermit commands for downloading an image, then copying it into the secondary bank: loadb @@ -76,7 +76,7 @@ it into the secondary bank: cp.b $loadaddr ff780000 80000 -U-boot commands for downloading an image via tftp and flashing +U-Boot commands for downloading an image via tftp and flashing it into the second bank: tftp 10000 @@ -211,7 +211,7 @@ Memory Map: Flash Bank 2 @ 0xff000000 Ram @ 0 -Commands for downloading a u-boot image to memory from edink: +Commands for downloading a U-Boot image to memory from edink: env -c time -s 4/8/2004 4:30p diff --git a/doc/README.mxs b/doc/README.mxs index ed2e568856..6ea73b9d5b 100644 --- a/doc/README.mxs +++ b/doc/README.mxs @@ -1,4 +1,4 @@ -Booting U-boot on a MXS processor +Booting U-Boot on a MXS processor ================================= This document describes the MXS U-Boot port. This document mostly covers topics @@ -23,7 +23,7 @@ Contents 2) Compiling U-Boot for a MXS based board 3) Installation of U-Boot for a MXS based board to SD card 4) Installation of U-Boot into NAND flash on a MX28 based board -5) Installation of U-boot into SPI NOR flash on a MX28 based board +5) Installation of U-Boot into SPI NOR flash on a MX28 based board 1) Prerequisites ---------------- @@ -95,19 +95,19 @@ Next, configure U-Boot for a MXS based board Examples: -1. For building U-boot for Denx M28EVK board: +1. For building U-Boot for Denx M28EVK board: $ make m28evk_config -2. For building U-boot for Freescale MX28EVK board: +2. For building U-Boot for Freescale MX28EVK board: $ make mx28evk_config -3. For building U-boot for Freescale MX23EVK board: +3. For building U-Boot for Freescale MX23EVK board: $ make mx23evk_config -4. For building U-boot for Olimex MX23 Olinuxino board: +4. For building U-Boot for Olimex MX23 Olinuxino board: $ make mx23_olinuxino_config @@ -267,7 +267,7 @@ There are two possibilities when preparing an image writable to NAND flash. 5) Installation of U-Boot into SPI NOR flash on a MX28 based board ------------------------------------------------------------------ -The u-boot.sb file can be directly written to SPI NOR from U-boot prompt. +The u-boot.sb file can be directly written to SPI NOR from U-Boot prompt. Load u-boot.sb into RAM, this can be done in several ways and one way is to use tftp: @@ -278,7 +278,7 @@ Probe the SPI NOR flash: (SPI NOR should be succesfully detected in this step) -Erase the blocks where U-boot binary will be written to: +Erase the blocks where U-Boot binary will be written to: => sf erase 0x0 0x80000 Write u-boot.sb to SPI NOR: @@ -287,4 +287,4 @@ Write u-boot.sb to SPI NOR: Power off the board and set the boot mode DIP switches to boot from the SPI NOR according to MX28 manual section 12.2.1 (Table 12-2) -Last step is to power up the board and U-boot should start from SPI NOR. +Last step is to power up the board and U-Boot should start from SPI NOR. diff --git a/doc/README.odroid b/doc/README.odroid index 8a004ca6ba..ef243d1bde 100644 --- a/doc/README.odroid +++ b/doc/README.odroid @@ -1,4 +1,4 @@ - U-boot for Odroid X2/U3/XU3 + U-Boot for Odroid X2/U3/XU3 ======================== 1. Summary @@ -36,7 +36,7 @@ https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel 4. Boot media layout ==================== -The table below shows SD/eMMC cards layout for U-boot. +The table below shows SD/eMMC cards layout for U-Boot. The block offset is starting from 0 and the block size is 512B. ------------------------------------- | Binary | Block offset| part type | @@ -44,7 +44,7 @@ The block offset is starting from 0 and the block size is 512B. ------------------------------------- | Bl1 | 1 | 0 | 1 (boot) | | Bl2 | 31 | 30 | 1 (boot) | -| U-boot | 63 | 62 | 1 (boot) | +| U-Boot | 63 | 62 | 1 (boot) | | Tzsw | 2111 | 2110 | 1 (boot) | | Uboot Env | 2560 | 2560 | 0 (user) | ------------------------------------- @@ -62,18 +62,18 @@ From the downloaded files, You can find: without problem) This is all you need to boot this board. But if you want to use your custom -u-boot then you need to change u-boot.bin with your own u-boot binary* +U-Boot then you need to change u-boot.bin with your own U-Boot binary* and run the script "sd_fusing.sh" - this script is valid only for SD card. *note: -The proper binary file of current U-boot is u-boot-dtb.bin. +The proper binary file of current U-Boot is u-boot-dtb.bin. quick steps for Linux: - Download all files from the link at point 3 and extract it if needed. - put any SD card into the SD reader - check the device with "dmesg" - run ./sd_fusing.sh /dev/sdX - where X is SD card device (but not a partition) -Check if Hardkernel U-boot is booting, and next do the same with your U-boot. +Check if Hardkernel U-Boot is booting, and next do the same with your U-Boot. 6. Prepare the eMMC boot card with a eMMC card reader (boot from eMMC card slot) @@ -92,19 +92,19 @@ eMMC partition - its size is usually very small, about 1-4 MiB. If you have an eMMC->microSD adapter you can prepare the card as in point 5. But then the device can boot only from the SD card slot. -8. Prepare the boot media using Hardkernel U-boot +8. Prepare the boot media using Hardkernel U-Boot ================================================= -You can update the U-boot to the custom one if you have a working bootloader +You can update the U-Boot to the custom one if you have a working bootloader delivered with the board on the eMMC/SD card. Then follow the steps: - install the android fastboot tool - connect a micro usb cable to the board -- on the U-boot prompt, run command: fastboot (as a root) +- on the U-Boot prompt, run command: fastboot (as a root) - on the host, run command: "fastboot flash bootloader u-boot-dtb.bin" -- the custom U-boot should start after the board resets. +- the custom U-Boot should start after the board resets. 9. Partition layout ==================== -Default U-boot environment is setup for fixed partition layout. +Default U-Boot environment is setup for fixed partition layout. Partition table: MSDOS. Disk layout and files as listed in the table below. ----- ------ ------ ------ -------- --------------------------------- diff --git a/doc/README.pxe b/doc/README.pxe index bd175eb22d..cc182c972d 100644 --- a/doc/README.pxe +++ b/doc/README.pxe @@ -5,8 +5,8 @@ */ The 'pxe' commands provide a near subset of the functionality provided by -the PXELINUX boot loader. This allows U-boot based systems to be controlled -remotely using the same PXE based techniques that many non U-boot based servers +the PXELINUX boot loader. This allows U-Boot based systems to be controlled +remotely using the same PXE based techniques that many non U-Boot based servers use. Commands @@ -99,7 +99,7 @@ with # are treated as comments. White space between and at the beginning of lines is ignored. The size of pxe files and the number of labels is only limited by the amount -of RAM available to U-boot. Memory for labels is dynamically allocated as +of RAM available to U-Boot. Memory for labels is dynamically allocated as they're parsed, and memory for pxe files is statically allocated, and its location is given by the pxefile_addr_r environment variable. The pxe code is not aware of the size of the pxefile memory and will outgrow it if pxe files @@ -206,38 +206,38 @@ to be downloaded, and boot with the command line "root=/dev/sdb1" Differences with PXELINUX ========================= -The biggest difference between U-boot's pxe and PXELINUX is that since -U-boot's pxe support is written entirely in C, it can run on any platform -with network support in U-boot. Here are some other differences between -PXELINUX and U-boot's pxe support. +The biggest difference between U-Boot's pxe and PXELINUX is that since +U-Boot's pxe support is written entirely in C, it can run on any platform +with network support in U-Boot. Here are some other differences between +PXELINUX and U-Boot's pxe support. -- U-boot's pxe does not support the PXELINUX DHCP option codes specified +- U-Boot's pxe does not support the PXELINUX DHCP option codes specified in RFC 5071, but could be extended to do so. -- when U-boot's pxe fails to boot, it will return control to U-boot, - allowing another command to run, other U-boot command, instead of resetting +- when U-Boot's pxe fails to boot, it will return control to U-Boot, + allowing another command to run, other U-Boot command, instead of resetting the machine like PXELINUX. -- U-boot's pxe doesn't rely on or provide an UNDI/PXE stack in memory, it - only uses U-boot. +- U-Boot's pxe doesn't rely on or provide an UNDI/PXE stack in memory, it + only uses U-Boot. -- U-boot's pxe doesn't provide the full menu implementation that PXELINUX +- U-Boot's pxe doesn't provide the full menu implementation that PXELINUX does, only a simple text based menu using the commands described in this README. With PXELINUX, it's possible to have a graphical boot - menu, submenus, passwords, etc. U-boot's pxe could be extended to support + menu, submenus, passwords, etc. U-Boot's pxe could be extended to support a more robust menuing system like that of PXELINUX's. -- U-boot's pxe expects U-boot uimg's as kernels. Anything that would work - with the 'bootm' command in U-boot could work with the 'pxe boot' command. +- U-Boot's pxe expects U-Boot uimg's as kernels. Anything that would work + with the 'bootm' command in U-Boot could work with the 'pxe boot' command. -- U-boot's pxe only recognizes a single file on the initrd command line. It +- U-Boot's pxe only recognizes a single file on the initrd command line. It could be extended to support multiple. -- in U-boot's pxe, the localboot command doesn't necessarily cause a local +- in U-Boot's pxe, the localboot command doesn't necessarily cause a local disk boot - it will do whatever is defined in the 'localcmd' env variable. And since it doesn't support a full UNDI/PXE stack, the type field is ignored. -- the interactive prompt in U-boot's pxe only allows you to choose a label +- the interactive prompt in U-Boot's pxe only allows you to choose a label from the menu. If you want to boot something not listed, you can ctrl+c - out of 'pxe boot' and use existing U-boot commands to accomplish it. + out of 'pxe boot' and use existing U-Boot commands to accomplish it. diff --git a/doc/README.qemu-mips b/doc/README.qemu-mips index a192752f4d..3940fac603 100644 --- a/doc/README.qemu-mips +++ b/doc/README.qemu-mips @@ -157,7 +157,7 @@ This GDB was configured as "--host=i486-linux-gnu --target=mipsel-unknown-linux- (gdb) target remote localhost:1234 Remote debugging using localhost:1234 _start () at start.S:64 -64 RVECENT(reset,0) /* U-boot entry point */ +64 RVECENT(reset,0) /* U-Boot entry point */ Current language: auto; currently asm (gdb) b board.c:289 Breakpoint 1 at 0xbfc00cc8: file board.c, line 289. diff --git a/doc/README.sata b/doc/README.sata index d0ce6673b0..b1104bbd3b 100644 --- a/doc/README.sata +++ b/doc/README.sata @@ -1,4 +1,4 @@ -1. SATA usage in U-boot +1. SATA usage in U-Boot There are two ways to operate the hard disk @@ -45,9 +45,9 @@ SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN boot => bootm 200000 1000000 2000000 -1.3 How to load an image from an ext2 file system in U-boot? +1.3 How to load an image from an ext2 file system in U-Boot? - U-boot doesn't support writing to an ext2 file system, so the + U-Boot doesn't support writing to an ext2 file system, so the files must be written by other means (e.g. linux). => ext2ls sata 0:1 / diff --git a/doc/README.video b/doc/README.video index 62ac17b049..e7ae98aa5d 100644 --- a/doc/README.video +++ b/doc/README.video @@ -32,13 +32,13 @@ The driver has been tested with the following configurations: Example: video-mode=fslfb:1280x1024-32@60,monitor=dvi -U-boot sunxi video controller driver +U-Boot sunxi video controller driver ==================================== -U-boot supports hdmi and lcd output on Allwinner sunxi SoCs, lcd output +U-Boot supports hdmi and lcd output on Allwinner sunxi SoCs, lcd output requires the CONFIG_VIDEO_LCD_MODE Kconfig value to be set. -The sunxi u-boot driver supports the following video-mode options: +The sunxi U-Boot driver supports the following video-mode options: - monitor=[none|dvi|hdmi|lcd|vga|composite-*] - Select the video output to use none: Disable video output. diff --git a/doc/SPI/README.ti_qspi_flash b/doc/SPI/README.ti_qspi_flash index 1b86d01a0e..9064739c3e 100644 --- a/doc/SPI/README.ti_qspi_flash +++ b/doc/SPI/README.ti_qspi_flash @@ -1,4 +1,4 @@ -QSPI U-boot support +QSPI U-Boot support ------------------ Host processor is connected to serial flash device via qpsi @@ -44,4 +44,4 @@ drivers/qspi/ti_qspi.c Testing ------- A seperated file named README.dra_qspi_test has been created which gives all the -details about the commands required to test qspi at u-boot level. +details about the commands required to test qspi at U-Boot level. diff --git a/doc/uImage.FIT/kernel.its b/doc/uImage.FIT/kernel.its index 539cdbfafe..e668c3f6e7 100644 --- a/doc/uImage.FIT/kernel.its +++ b/doc/uImage.FIT/kernel.its @@ -1,5 +1,5 @@ /* - * Simple U-boot uImage source file containing a single kernel + * Simple U-Boot uImage source file containing a single kernel */ /dts-v1/; diff --git a/doc/uImage.FIT/kernel_fdt.its b/doc/uImage.FIT/kernel_fdt.its index 7e940d2af9..7c521486ef 100644 --- a/doc/uImage.FIT/kernel_fdt.its +++ b/doc/uImage.FIT/kernel_fdt.its @@ -1,5 +1,5 @@ /* - * Simple U-boot uImage source file containing a single kernel and FDT blob + * Simple U-Boot uImage source file containing a single kernel and FDT blob */ /dts-v1/; diff --git a/doc/uImage.FIT/multi.its b/doc/uImage.FIT/multi.its index 881b74952d..37369ecc82 100644 --- a/doc/uImage.FIT/multi.its +++ b/doc/uImage.FIT/multi.its @@ -1,5 +1,5 @@ /* - * U-boot uImage source file with multiple kernels, ramdisks and FDT blobs + * U-Boot uImage source file with multiple kernels, ramdisks and FDT blobs */ /dts-v1/; diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt index 029f481893..3175c9f0b7 100644 --- a/doc/uImage.FIT/source_file_format.txt +++ b/doc/uImage.FIT/source_file_format.txt @@ -1,4 +1,4 @@ -U-boot new uImage source file format (bindings definition) +U-Boot new uImage source file format (bindings definition) ========================================================== Author: Marian Balakowicz @@ -14,7 +14,7 @@ Booting with a Flattened Device Tree is much more flexible and is intended to replace direct passing of 'struct bd_info' which was used to boot pre-FDT kernels. -However, U-boot needs to support both techniques to provide backward +However, U-Boot needs to support both techniques to provide backward compatibility for platforms which are not FDT ready. Number of elements playing role in the booting process has increased and now includes the FDT blob. Kernel image, FDT blob and possibly ramdisk image - all must be placed @@ -36,15 +36,15 @@ a) Implementation Libfdt has been selected for the new uImage format implementation as (1) it provides needed functionality, (2) is actively maintained and developed and -(3) increases code reuse as it is already part of the U-boot source tree. +(3) increases code reuse as it is already part of the U-Boot source tree. b) Terminology This document defines new uImage structure by providing FDT bindings for new -uImage internals. Bindings are defined from U-boot perspective, i.e. describe -final form of the uImage at the moment when it reaches U-boot. User +uImage internals. Bindings are defined from U-Boot perspective, i.e. describe +final form of the uImage at the moment when it reaches U-Boot. User perspective may be simpler, as some of the properties (like timestamps and -hashes) will need to be filled in automatically by the U-boot mkimage tool. +hashes) will need to be filled in automatically by the U-Boot mkimage tool. To avoid confusion with the kernel FDT the following naming convention is proposed for the new uImage format related terms: @@ -61,7 +61,7 @@ c) Image building procedure The following picture shows how the new uImage is prepared. Input consists of image source file (.its) and a set of data files. Image is created with the -help of standard U-boot mkimage tool which in turn uses dtc (device tree +help of standard U-Boot mkimage tool which in turn uses dtc (device tree compiler) to produce image tree blob (.itb). Resulting .itb file is the actual binary of a new uImage. diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c index 2c6d42410c..7b6a1558d2 100644 --- a/drivers/block/mvsata_ide.c +++ b/drivers/block/mvsata_ide.c @@ -83,7 +83,7 @@ struct mvsata_port_registers { * Status codes to return to client callers. Currently, callers ignore * exact value and only care for zero or nonzero, so no need to make this * public, it is only #define'd for clarity. - * If/when standard negative codes are implemented in U-boot, then these + * If/when standard negative codes are implemented in U-Boot, then these * #defines should be moved to, or replaced by ones from, the common list * of status codes. */ diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.c b/drivers/ddr/marvell/axp/ddr3_hw_training.c index a8c5e6a534..c8d7041117 100644 --- a/drivers/ddr/marvell/axp/ddr3_hw_training.c +++ b/drivers/ddr/marvell/axp/ddr3_hw_training.c @@ -450,7 +450,7 @@ int ddr3_hw_training(u32 target_freq, u32 ddr_width, int xor_bypass, ddr3_set_performance_params(&dram_info); if (dram_info.ecc_ena) { - /* Need to SCRUB the DRAM memory area to load U-boot */ + /* Need to SCRUB the DRAM memory area to load U-Boot */ mv_sys_xor_finish(); dram_info.num_cs = 1; dram_info.cs_ena = 1; diff --git a/drivers/gpio/db8500_gpio.c b/drivers/gpio/db8500_gpio.c index d5cb383e85..db32db6845 100644 --- a/drivers/gpio/db8500_gpio.c +++ b/drivers/gpio/db8500_gpio.c @@ -1,14 +1,14 @@ /* * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. * The purpose is that GPIO config found in kernel should work by simply - * copy-paste it to U-boot. + * copy-paste it to U-Boot. * * Original Linux authors: * Copyright (C) 2008,2009 STMicroelectronics * Copyright (C) 2009 Alessandro Rubini * Rewritten based on work by Prafulla WADASKAR * - * Ported to U-boot by: + * Ported to U-Boot by: * Copyright (C) 2010 Joakim Axelsson * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/mmc/sh_sdhi.c b/drivers/mmc/sh_sdhi.c index cc62c89a25..30e538cc16 100644 --- a/drivers/mmc/sh_sdhi.c +++ b/drivers/mmc/sh_sdhi.c @@ -526,7 +526,7 @@ static int sh_sdhi_start_cmd(struct sh_sdhi_host *host, opc = sh_sdhi_set_cmd(host, data, opc); /* - * U-boot cannot use interrupt. + * U-Boot cannot use interrupt. * So this flag may not be clear by timing */ sh_sdhi_writew(host, SDHI_INFO1, ~INFO1_RESP_END); diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c index fccbfb5129..cbeb74a5bb 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/fsl_ifc_spl.c @@ -236,7 +236,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) /* * Main entrypoint for NAND Boot. It's necessary that SDRAM is already - * configured and available since this code loads the main U-boot image + * configured and available since this code loads the main U-Boot image * from NAND into SDRAM and starts from there. */ void nand_boot(void) diff --git a/drivers/mtd/nand/lpc32xx_nand_slc.c b/drivers/mtd/nand/lpc32xx_nand_slc.c index 2e5f139606..4e1be36654 100644 --- a/drivers/mtd/nand/lpc32xx_nand_slc.c +++ b/drivers/mtd/nand/lpc32xx_nand_slc.c @@ -516,7 +516,7 @@ static int lpc32xx_write_page_hwecc(struct mtd_info *mtd, /* * LPC32xx has only one SLC NAND controller, don't utilize * CONFIG_SYS_NAND_SELF_INIT to be able to reuse this function - * both in SPL NAND and U-boot images. + * both in SPL NAND and U-Boot images. */ int board_nand_init(struct nand_chip *lpc32xx_chip) { diff --git a/drivers/mtd/nand/mxc_nand_spl.c b/drivers/mtd/nand/mxc_nand_spl.c index 69b736a848..6ac2c96eeb 100644 --- a/drivers/mtd/nand/mxc_nand_spl.c +++ b/drivers/mtd/nand/mxc_nand_spl.c @@ -337,7 +337,7 @@ void nand_boot(void) if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) { - /* Copy from NAND successful, start U-boot */ + /* Copy from NAND successful, start U-Boot */ uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; uboot(); } else { diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 70fc02ee5c..6a434d7f2d 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -5380,7 +5380,7 @@ e1000_initialize(bd_t * bis) for (i = 0; (devno = pci_find_devices(e1000_supported, i)) >= 0; i++) { /* * These will never get freed due to errors, this allows us to - * perform SPI EEPROM programming from U-boot, for example. + * perform SPI EEPROM programming from U-Boot, for example. */ struct eth_device *nic = malloc(sizeof(*nic)); struct e1000_hw *hw = malloc(sizeof(*hw)); diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index fdbd584186..53c4966c33 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -455,7 +455,7 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr) /* * Management Complex cores should be held at reset out of POR. - * U-boot should be the first software to touch MC. To be safe, + * U-Boot should be the first software to touch MC. To be safe, * we reset all cores again by setting GCR1 to 0. It doesn't do * anything if they are held at reset. After we setup the firmware * we kick off MC by deasserting the reset bit for core 0, and diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c index c4dd01ec2a..3526876d14 100644 --- a/drivers/net/lan91c96.c +++ b/drivers/net/lan91c96.c @@ -1,7 +1,7 @@ /*------------------------------------------------------------------------ * lan91c96.c * This is a driver for SMSC's LAN91C96 single-chip Ethernet device, based - * on the SMC91111 driver from U-boot. + * on the SMC91111 driver from U-Boot. * * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c index 887cfd957b..71d133cc8f 100644 --- a/drivers/net/ne2000_base.c +++ b/drivers/net/ne2000_base.c @@ -650,7 +650,7 @@ dp83902a_poll(void) } -/* U-boot specific routines */ +/* U-Boot specific routines */ static u8 *pbuf = NULL; static int pkey = -1; diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c index 45dff98d9d..58f882b22a 100644 --- a/drivers/serial/sandbox.c +++ b/drivers/serial/sandbox.c @@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR; /* * * serial_buf: A buffer that holds keyboard characters for the - * Sandbox U-boot. + * Sandbox U-Boot. * * invariants: * serial_buf_write == serial_buf_read -> empty buffer diff --git a/drivers/serial/serial_bfin.c b/drivers/serial/serial_bfin.c index 0443b8427a..1d5be2a7a2 100644 --- a/drivers/serial/serial_bfin.c +++ b/drivers/serial/serial_bfin.c @@ -1,5 +1,5 @@ /* - * U-boot - serial.c Blackfin Serial Driver + * U-Boot - serial.c Blackfin Serial Driver * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 99345eb9a0..69f680cc11 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -1,5 +1,5 @@ # -# Makefile for the U-boot SOC specific device drivers. +# Makefile for the U-Boot SOC specific device drivers. # # SPDX-License-Identifier: GPL-2.0+ # diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index a13b21d0a0..60f9272ae6 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -2,7 +2,7 @@ * composite.c - infrastructure for Composite USB Gadgets * * Copyright (C) 2006-2008 David Brownell - * U-boot porting: Lukasz Majewski + * U-Boot porting: Lukasz Majewski * * SPDX-License-Identifier: GPL-2.0+ */ diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index 014a6791c1..64284b06f8 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -5,7 +5,7 @@ * * SPDX-License-Identifier: GPL-2.0+ * - * Ported to U-boot by: Thomas Smits and + * Ported to U-Boot by: Thomas Smits and * Remy Bohmer */ diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 6ddbe83deb..a53a6dcda3 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -7,7 +7,7 @@ * * SPDX-License-Identifier: GPL-2.0+ * - * Ported to U-boot by: Thomas Smits and + * Ported to U-Boot by: Thomas Smits and * Remy Bohmer */ diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index cfe9a24e24..9b06f028d6 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -256,7 +256,7 @@ static inline int BITRATE(struct usb_gadget *g) #if defined(CONFIG_USBNET_MANUFACTURER) static char *iManufacturer = CONFIG_USBNET_MANUFACTURER; #else -static char *iManufacturer = "U-boot"; +static char *iManufacturer = "U-Boot"; #endif /* These probably need to be configurable. */ diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index e9811c3864..973cd971ad 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -11,7 +11,7 @@ * Some are available on 2.4 kernels; several are available, but not * yet pushed in the 2.6 mainline tree. * - * Ported to U-boot by: Thomas Smits and + * Ported to U-Boot by: Thomas Smits and * Remy Bohmer */ #ifdef CONFIG_USB_GADGET_NET2280 diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 8c3ff64fe3..3e24fbf80e 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -3,7 +3,7 @@ * * SPDX-License-Identifier: LGPL-2.1+ * - * Ported to U-boot by: Thomas Smits and + * Ported to U-Boot by: Thomas Smits and * Remy Bohmer */ diff --git a/examples/standalone/README.smc91111_eeprom b/examples/standalone/README.smc91111_eeprom index f73a8d3a58..0d8bc63f32 100644 --- a/examples/standalone/README.smc91111_eeprom +++ b/examples/standalone/README.smc91111_eeprom @@ -7,14 +7,14 @@ EEPROMs. Contents: ------------------------ -1. Ensuring U-boot's MAC address can be set in hardware +1. Ensuring U-Boot's MAC address can be set in hardware 2. Running the smc91111_eeprom program 3. Setting MAC addresses 4. Other things you can do with this 5. Things to be done. -1. Ensuring U-boot's MAC address can be set in hardware +1. Ensuring U-Boot's MAC address can be set in hardware -------------------------------------------------------------------------- On the Internet - MAC addresses are very important. Short for Media @@ -130,14 +130,14 @@ SMC91111> The MAC address can be stored in four locations: -Boot environmental variable in Flash <- can not change, without - re-flashing U-boot. + re-flashing U-Boot. U-Boot environmental variable <- can not change, without resetting board/U-Boot LAN91C111 Registers <- volatile LAN91C111 EEPROM <- Non-volatile If you have not activated the network, and do not have a hardcoded -or pre-assigned MAC address in U-boot, the environmental variables +or pre-assigned MAC address in U-Boot, the environmental variables should be blank, and allow you to set things one time. To set the EEPROM MAC address to 12:34:56:78:9A:BC diff --git a/examples/standalone/smc91111_eeprom.c b/examples/standalone/smc91111_eeprom.c index afecbb1277..38fadede1e 100644 --- a/examples/standalone/smc91111_eeprom.c +++ b/examples/standalone/smc91111_eeprom.c @@ -6,7 +6,7 @@ * * Heavily borrowed from the following peoples GPL'ed software: * - Wolfgang Denk, DENX Software Engineering, wd@denx.de - * Das U-boot + * Das U-Boot * - Ladislav Michl ladis@linux-mips.org * A rejected patch on the U-Boot mailing list */ diff --git a/examples/standalone/smc911x_eeprom.c b/examples/standalone/smc911x_eeprom.c index 364ad2d2d5..2c05ed902d 100644 --- a/examples/standalone/smc911x_eeprom.c +++ b/examples/standalone/smc911x_eeprom.c @@ -9,7 +9,7 @@ * Based on smc91111_eeprom.c which: * Heavily borrowed from the following peoples GPL'ed software: * - Wolfgang Denk, DENX Software Engineering, wd@denx.de - * Das U-boot + * Das U-Boot * - Ladislav Michl ladis@linux-mips.org * A rejected patch on the U-Boot mailing list */ diff --git a/include/asm-generic/errno.h b/include/asm-generic/errno.h index 523defbab9..464cfb715c 100644 --- a/include/asm-generic/errno.h +++ b/include/asm-generic/errno.h @@ -1,5 +1,5 @@ /* - * U-boot - errno.h Error number defines + * U-Boot - errno.h Error number defines * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/include/config_distro_defaults.h b/include/config_distro_defaults.h index 9d1de5508f..0f85cd0e14 100644 --- a/include/config_distro_defaults.h +++ b/include/config_distro_defaults.h @@ -24,15 +24,15 @@ #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 #if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) #if !defined(CONFIG_BOOTP_VCI_STRING) -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7" #endif #elif defined(__aarch64__) #if !defined(CONFIG_BOOTP_VCI_STRING) -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv8" #endif #else #if !defined(CONFIG_BOOTP_VCI_STRING) -#define CONFIG_BOOTP_VCI_STRING "U-boot.arm" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.arm" #endif #endif #elif defined(__i386__) diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 342fdfe24a..535dc6eceb 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -334,7 +334,7 @@ * * Please notice, that the resulting clock frequency could differ from the * configured value. This is because the I2C clock is derived from system - * clock over a frequency divider with only a few divider values. U-boot + * clock over a frequency divider with only a few divider values. U-Boot * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated * approximation allways lies below the configured value, never above. */ diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index 2499b39c16..f6c0147dd9 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -271,7 +271,7 @@ /* * Load address and memory test area should agree with - * arch/nds32/config.mk. Be careful not to overwrite U-boot itself. + * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself. */ #define CONFIG_SYS_LOAD_ADDR 0x300000 diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 36637aef95..658b16d3ae 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF536 brettl2 board + * U-Boot - Configuration file for BF536 brettl2 board */ #ifndef __CONFIG_BCT_BRETTL2_H__ diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h index 597f1cd5d1..68a91a6b5a 100644 --- a/include/configs/bf506f-ezkit.h +++ b/include/configs/bf506f-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF506F EZ-Kit board + * U-Boot - Configuration file for BF506F EZ-Kit board */ #ifndef __CONFIG_BF506F_EZKIT_H__ diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 84bb044421..9f44ebdb0b 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF518F EZBrd board + * U-Boot - Configuration file for BF518F EZBrd board */ #ifndef __CONFIG_BF518F_EZBRD_H__ diff --git a/include/configs/bf525-ucr2.h b/include/configs/bf525-ucr2.h index d12963a5f0..5a6067e5e2 100644 --- a/include/configs/bf525-ucr2.h +++ b/include/configs/bf525-ucr2.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for bf525-ucr2 board + * U-Boot - Configuration file for bf525-ucr2 board * The board includes ADSP-BF525 rev. 0.2, * 32-bit SDRAM (SAMSUNG K4S561632H-UC75), * USB 2.0 High Speed OTG USB WIFI, diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 35a2228a6b..e9d900ef01 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF526 EZBrd board + * U-Boot - Configuration file for BF526 EZBrd board */ #ifndef __CONFIG_BF526_EZBRD_H__ diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index 2f3dec5b09..dd62e7e0fe 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF527 AD7160-EVAL board + * U-Boot - Configuration file for BF527 AD7160-EVAL board */ #ifndef __CONFIG_BF527_AD7160_EVAL_H__ diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index aee776132c..44de44f8f5 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF537 STAMP board + * U-Boot - Configuration file for BF537 STAMP board */ #ifndef __CONFIG_BF527_EZKIT_H__ diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index 51814a677f..6b51201629 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF527 SDP board + * U-Boot - Configuration file for BF527 SDP board */ #ifndef __CONFIG_BF527_SDP_H__ diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index 1b7290e8d7..95811018cf 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF533 EZKIT board + * U-Boot - Configuration file for BF533 EZKIT board */ #ifndef __CONFIG_BF533_EZKIT_H__ diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 4876169104..c8c48aeac4 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF533 STAMP board + * U-Boot - Configuration file for BF533 STAMP board */ #ifndef __CONFIG_BF533_STAMP_H__ diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 4fbdca7239..be474ad1ba 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CSP Minotaur board + * U-Boot - Configuration file for CSP Minotaur board * * Thu Oct 25 15:30:44 CEST 2007 * Minotaur config, brushed up for official uClinux dist. diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index 2474adb555..5794f471eb 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF537 PNAV board + * U-Boot - Configuration file for BF537 PNAV board */ #ifndef __CONFIG_BF537_PNAV_H__ diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index 89d26043da..6d4a93b324 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CSP Minotaur board + * U-Boot - Configuration file for CSP Minotaur board * * Thu Oct 25 15:30:44 CEST 2007 * Minotaur config, brushed up for official uClinux dist. diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index f250cdbf0a..b1787132ab 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF537 STAMP board + * U-Boot - Configuration file for BF537 STAMP board */ #ifndef __CONFIG_BF537_STAMP_H__ diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index b1d4f263ae..55becdc5a1 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF538F EZ-Kit Lite board + * U-Boot - Configuration file for BF538F EZ-Kit Lite board */ #ifndef __CONFIG_BF538F_EZKIT_H__ diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 65009c6f28..8198cb862a 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF548 STAMP board + * U-Boot - Configuration file for BF548 STAMP board */ #ifndef __CONFIG_BF548_EZKIT_H__ diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 92251fc0bd..31862daf31 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF561 Acvilon System On Module + * U-Boot - Configuration file for BF561 Acvilon System On Module * For more information please go to http://www.niistt.ru/ */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index efbc6c21d9..1a3b33f395 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF561 EZKIT board + * U-Boot - Configuration file for BF561 EZKIT board */ #ifndef __CONFIG_BF561_EZKIT_H__ diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index b5d4847523..3e0bff56dd 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF609 EZ-Kit board + * U-Boot - Configuration file for BF609 EZ-Kit board */ #ifndef __CONFIG_BF609_EZKIT_H__ diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 60650aa77b..b9e859c07b 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BlackStamp board + * U-Boot - Configuration file for BlackStamp board * Configuration by Ben Matthews for UR LLE using bf533-stamp.h * as a template * See http://blackfin.uclinux.org/gf/project/blackstamp/ diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index 16949aa929..a262e7914f 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -1,4 +1,4 @@ -/* U-boot for BlackVME. (C) Wojtek Skulski 2010. +/* U-Boot for BlackVME. (C) Wojtek Skulski 2010. * The board includes ADSP-BF561 rev. 0.5, * 32-bit SDRAM (2 * MT48LC16M16A2TG or MT48LC32M16A2TG), * Gigabit Ether AX88180 (ASIX) + 88E1111 rev. B2 (Marvell), diff --git a/include/configs/br4.h b/include/configs/br4.h index 7dda472fe7..85f31a46a4 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BR4 Appliance + * U-Boot - Configuration file for BR4 Appliance * * based on bf537-stamp.h * Copyright (c) Switchfin Org. diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index e9e4e1414a..761e2c5f43 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF527 board + * U-Boot - Configuration file for CM-BF527 board */ #ifndef __CONFIG_CM_BF527_H__ diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index a4647858dd..d06333dc41 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF533 board + * U-Boot - Configuration file for CM-BF533 board */ #ifndef __CONFIG_CM_BF533_H__ diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 0eebe56503..746a5bd417 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF537E board + * U-Boot - Configuration file for CM-BF537E board */ #ifndef __CONFIG_CM_BF537E_H__ diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 3a2d72626c..71008aaa06 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF537U board + * U-Boot - Configuration file for CM-BF537U board */ #ifndef __CONFIG_CM_BF537U_H__ diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index cde23ada40..37205a9c5b 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for cm-bf548 board + * U-Boot - Configuration file for cm-bf548 board */ #ifndef __CONFIG_CM_BF548_H__ diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 9d8a2c613f..284ec83391 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF561 board + * U-Boot - Configuration file for CM-BF561 board */ #ifndef __CONFIG_CM_BF561_H__ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 8e70d8c94c..67a143f8f6 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -7,7 +7,7 @@ */ /* --- - * Version: U-boot 1.0.0 - initial release for Sentec COBRA5272 board + * Version: U-Boot 1.0.0 - initial release for Sentec COBRA5272 board * Date: 2004-03-29 * Author: Florian Schlote * diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h index 3b2da0ddd4..c46e60d2e5 100644 --- a/include/configs/dnp5370.h +++ b/include/configs/dnp5370.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for SSV DNP5370 board + * U-Boot - Configuration file for SSV DNP5370 board */ #ifndef __CONFIG_DNP5370_H__ diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 9fce1cda6b..7bc58dc414 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for Cirrus Logic EDB93xx boards + * U-Boot - Configuration file for Cirrus Logic EDB93xx boards */ #ifndef __CONFIG_H diff --git a/include/configs/espt.h b/include/configs/espt.h index d854341b07..4896498c46 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -56,7 +56,7 @@ #define CONFIG_SYS_MAX_FLASH_BANKS (1) #define CONFIG_SYS_MAX_FLASH_SECT (150) -/* U-boot setting */ +/* U-Boot setting */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_MONITOR_LEN (128 * 1024) diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 9c3ea883ff..834a22f7a5 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -113,7 +113,7 @@ #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) -/* U-boot copy size from boot Media to DRAM.*/ +/* U-Boot copy size from boot Media to DRAM.*/ #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index 4757929618..7cb23466fb 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for IBF-DSP561 board + * U-Boot - Configuration file for IBF-DSP561 board */ #ifndef __CONFIG_IBF_DSP561__H__ diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 0993ffa444..3638648713 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for IP04 board (having BF532 processor) + * U-Boot - Configuration file for IP04 board (having BF532 processor) * * Copyright (c) 2006 Intratrade Ltd., Ivan Danov, idanov@gmail.com * diff --git a/include/configs/ls2080a_emu.h b/include/configs/ls2080a_emu.h index 4a7ba2477b..534ebb6735 100644 --- a/include/configs/ls2080a_emu.h +++ b/include/configs/ls2080a_emu.h @@ -11,12 +11,12 @@ #ifdef CONFIG_LS2080A #define CONFIG_IDENT_STRING " LS2080A-EMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2080A-EMU" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2080A-EMU" #endif #ifdef CONFIG_LS2085A #define CONFIG_IDENT_STRING " LS2085A-EMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2085A-EMU" #endif #define CONFIG_SYS_CLK_FREQ 100000000 diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h index 876ee30517..2c2ce7bfec 100644 --- a/include/configs/ls2080a_simu.h +++ b/include/configs/ls2080a_simu.h @@ -11,12 +11,12 @@ #ifdef CONFIG_LS2080A #define CONFIG_IDENT_STRING " LS2080A-SIMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2080A-SIMU" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2080A-SIMU" #endif #ifdef CONFIG_LS2085A #define CONFIG_IDENT_STRING " LS2085A-SIMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-SIMU" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2085A-SIMU" #endif #define CONFIG_SYS_CLK_FREQ 100000000 diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 863b032042..3813e25d2f 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -165,7 +165,7 @@ /* NAND configuration for the NAND_SPL */ -/* Start copying real U-boot from the second page */ +/* Start copying real U-Boot from the second page */ #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800 /* Load U-Boot to this address */ diff --git a/include/configs/novena.h b/include/configs/novena.h index d5f517c76d..a5416131ba 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -1,5 +1,5 @@ /* - * Configuration settings for the Novena U-boot. + * Configuration settings for the Novena U-Boot. * * Copyright (C) 2014 Marek Vasut * diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 1dd71a8eb6..996f772a28 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -21,7 +21,7 @@ #include /* ---------------------------------------------------------------------------- - * Supported U-boot commands + * Supported U-Boot commands * ---------------------------------------------------------------------------- */ #define CONFIG_CMD_ASKENV @@ -37,7 +37,7 @@ #define CONFIG_CMD_PING /* ---------------------------------------------------------------------------- - * Supported U-boot features + * Supported U-Boot features * ---------------------------------------------------------------------------- */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 2004d148c6..0f16a6e19d 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -175,7 +175,7 @@ #endif /* CONFIG_USB_OMAP3 */ /* ---------------------------------------------------------------------------- - * U-boot features + * U-Boot features * ---------------------------------------------------------------------------- */ #define CONFIG_SYS_MAXARGS 16 /* max args for a command */ diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h index 27cd9bed5c..23a8a07132 100644 --- a/include/configs/omap3_evm_quick_mmc.h +++ b/include/configs/omap3_evm_quick_mmc.h @@ -16,7 +16,7 @@ #include /* ---------------------------------------------------------------------------- - * Supported U-boot commands + * Supported U-Boot commands * ---------------------------------------------------------------------------- */ #define CONFIG_CMD_MMC @@ -30,7 +30,7 @@ */ /* ---------------------------------------------------------------------------- - * Supported U-boot features + * Supported U-Boot features * ---------------------------------------------------------------------------- */ #define CONFIG_SILENT_CONSOLE diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h index 124e8c6641..bb908fad3e 100644 --- a/include/configs/omap3_evm_quick_nand.h +++ b/include/configs/omap3_evm_quick_nand.h @@ -16,7 +16,7 @@ #include /* ---------------------------------------------------------------------------- - * Supported U-boot commands + * Supported U-Boot commands * ---------------------------------------------------------------------------- */ #define CONFIG_CMD_NAND @@ -29,7 +29,7 @@ */ /* ---------------------------------------------------------------------------- - * Supported U-boot features + * Supported U-Boot features * ---------------------------------------------------------------------------- */ #define CONFIG_SILENT_CONSOLE diff --git a/include/configs/origen.h b/include/configs/origen.h index ef80bf60ca..fa71874f8a 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -111,7 +111,7 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 -/* U-boot copy size from boot Media to DRAM.*/ +/* U-Boot copy size from boot Media to DRAM.*/ #define COPY_BL2_SIZE 0x80000 #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) diff --git a/include/configs/pr1.h b/include/configs/pr1.h index 2e5ce75629..1af9ef7cad 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for PR1 Appliance + * U-Boot - Configuration file for PR1 Appliance * * based on bf537-stamp.h * Copyright (c) Switchfin Org. diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 7148f1da95..0fd2caf161 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -56,7 +56,7 @@ #define CONFIG_SYS_MAX_FLASH_BANKS (1) #define CONFIG_SYS_MAX_FLASH_SECT (520) -/* U-boot setting */ +/* U-Boot setting */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_MONITOR_LEN (128 * 1024) diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 2492f99269..b7ac402f98 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -92,7 +92,7 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 -/* U-boot copy size from boot Media to DRAM.*/ +/* U-Boot copy size from boot Media to DRAM.*/ #define COPY_BL2_SIZE 0x80000 #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index d2630f4be1..a309448ecf 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -12,7 +12,7 @@ */ -/* U-boot Load Address */ +/* U-Boot Load Address */ #define CONFIG_SYS_TEXT_BASE 0x00700000 /* Ethernet driver configuration */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index f4213217bb..6db628a052 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -45,7 +45,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x00190000 #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -/* U-boot Load Address */ +/* U-Boot Load Address */ #define CONFIG_SYS_TEXT_BASE 0x00010000 #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 1e74535b5c..0f4d959e67 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for Bluetechnix TCM-BF518 board + * U-Boot - Configuration file for Bluetechnix TCM-BF518 board */ #ifndef __CONFIG_TCM_BF518_H__ diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index a8947c5934..fc98d242fb 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for TCM-BF537 board + * U-Boot - Configuration file for TCM-BF537 board */ #ifndef __CONFIG_TCM_BF537_H__ diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h index 2f6c97cf58..50e1abb0e5 100644 --- a/include/configs/ts4800.h +++ b/include/configs/ts4800.h @@ -20,7 +20,7 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_NO_FLASH /* No NOR Flash */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-boot is a 2nd stage bootloader */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage bootloader */ #define CONFIG_HW_WATCHDOG diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 599b26959e..bf89a0e070 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -4,7 +4,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* U-boot - Common settings for UniPhier Family */ +/* U-Boot - Common settings for UniPhier Family */ #ifndef __CONFIG_UNIPHIER_COMMON_H__ #define __CONFIG_UNIPHIER_COMMON_H__ diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 814934aa92..133041bca5 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -24,7 +24,7 @@ #define CONFIG_SYS_ICACHE_OFF #define CONFIG_IDENT_STRING " vexpress_aemv8a" -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv8.vexpress_aemv8a" /* Link Definitions */ #if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \ diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h index 59b6310b57..883e58e660 100644 --- a/include/configs/vexpress_ca15_tc2.h +++ b/include/configs/vexpress_ca15_tc2.h @@ -12,7 +12,7 @@ #define __VEXPRESS_CA15X2_TC2_h #define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca15x2_tc2" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7.vexpress_ca15x2_tc2" #include "vexpress_common.h" #define CONFIG_SYSFLAGS_ADDR 0x1c010030 diff --git a/include/configs/vexpress_ca5x2.h b/include/configs/vexpress_ca5x2.h index a4ffdf54db..43850272a6 100644 --- a/include/configs/vexpress_ca5x2.h +++ b/include/configs/vexpress_ca5x2.h @@ -12,7 +12,7 @@ #define __VEXPRESS_CA5X2_h #define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca5x2" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7.vexpress_ca5x2" #include "vexpress_common.h" #endif /* __VEXPRESS_CA5X2_h */ diff --git a/include/configs/vexpress_ca9x4.h b/include/configs/vexpress_ca9x4.h index 71233d8c3f..99be50a5bd 100644 --- a/include/configs/vexpress_ca9x4.h +++ b/include/configs/vexpress_ca9x4.h @@ -12,7 +12,7 @@ #define __VEXPRESS_CA9X4_H #define CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca9x4" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7.vexpress_ca9x4" #include "vexpress_common.h" #endif /* VEXPRESS_CA9X4_H */ diff --git a/include/linux/linkage.h b/include/linux/linkage.h index efb04eeed4..8e2f15a635 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -1,5 +1,5 @@ /* - * U-boot - linkage.h + * U-Boot - linkage.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index c1d039cb85..442316b4e2 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -5,7 +5,7 @@ * notably ethernet adapters and various modems. It's used mostly with * firmware based USB peripherals. * - * Ported to U-boot by: Thomas Smits and + * Ported to U-Boot by: Thomas Smits and * Remy Bohmer */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 4adf35e3ae..b824f13477 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -11,7 +11,7 @@ * * This software is licensed under the GNU GPL version 2. * - * Ported to U-boot by: Thomas Smits and + * Ported to U-Boot by: Thomas Smits and * Remy Bohmer */ diff --git a/lib/Kconfig b/lib/Kconfig index 46d7034397..c7eab46516 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -16,7 +16,7 @@ config USE_PRIVATE_LIBGCC depends on HAVE_PRIVATE_LIBGCC help This option allows you to use the built-in libgcc implementation - of U-boot instead of the one privided by the compiler. + of U-Boot instead of the one privided by the compiler. If unsure, say N. config SYS_HZ diff --git a/lib/zlib/inffast.c b/lib/zlib/inffast.c index 0700e04cb9..e3c7f3b892 100644 --- a/lib/zlib/inffast.c +++ b/lib/zlib/inffast.c @@ -3,7 +3,7 @@ * For conditions of distribution and use, see copyright notice in zlib.h */ -/* U-boot: we already included these +/* U-Boot: we already included these #include "zutil.h" #include "inftrees.h" #include "inflate.h" diff --git a/lib/zlib/inftrees.c b/lib/zlib/inftrees.c index 7474a52e7f..b71b9695a8 100644 --- a/lib/zlib/inftrees.c +++ b/lib/zlib/inftrees.c @@ -3,7 +3,7 @@ * For conditions of distribution and use, see copyright notice in zlib.h */ -/* U-boot: we already included these +/* U-Boot: we already included these #include "zutil.h" #include "inftrees.h" */ diff --git a/lib/zlib/zutil.h b/lib/zlib/zutil.h index 7e05c3b564..e63bf68653 100644 --- a/lib/zlib/zutil.h +++ b/lib/zlib/zutil.h @@ -95,7 +95,7 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ /* Diagnostic functions */ #ifdef DEBUG -/* Not valid for U-boot +/* Not valid for U-Boot # include */ extern int z_verbose; extern void z_error OF((char *m)); diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c index 074234fd5d..e8e8c7756d 100644 --- a/scripts/basic/fixdep.c +++ b/scripts/basic/fixdep.c @@ -123,7 +123,7 @@ char *target; char *depfile; char *cmdline; -int is_spl_build = 0; /* hack for U-boot */ +int is_spl_build = 0; /* hack for U-Boot */ static void usage(void) { @@ -459,7 +459,7 @@ int main(int argc, char *argv[]) target = argv[2]; cmdline = argv[3]; - /* hack for U-boot */ + /* hack for U-Boot */ if (!strncmp(target, "spl/", 4) || !strncmp(target, "tpl/", 4)) is_spl_build = 1; diff --git a/tools/palmtreo680/flash_u-boot.c b/tools/palmtreo680/flash_u-boot.c index 3d8296fc6b..832d3fef7b 100644 --- a/tools/palmtreo680/flash_u-boot.c +++ b/tools/palmtreo680/flash_u-boot.c @@ -97,7 +97,7 @@ int main(int argc, char * const argv[]) return -errsv; } printf("The mtd partition contains %d blocks\n", devinfo.eb_cnt); - printf("U-boot will occupy %d blocks\n", num_blocks); + printf("U-Boot will occupy %d blocks\n", num_blocks); if (num_blocks > devinfo.eb_cnt) { fprintf(stderr, "Insufficient blocks on partition\n"); return -EINVAL; diff --git a/tools/patman/README b/tools/patman/README index 5bd74c4f83..e36857dede 100644 --- a/tools/patman/README +++ b/tools/patman/README @@ -138,7 +138,7 @@ is useful if your top commit is for setting up testing. How to install it ================= -The most up to date version of patman can be found in the U-boot sources. +The most up to date version of patman can be found in the U-Boot sources. However to use it on other projects it may be more convenient to install it as a standalone application. A distutils installer is included, this can be used to install patman: