From: Richard Levitte Date: Mon, 13 Jul 2015 23:15:49 +0000 (+0200) Subject: Conversion to UTF-8 where needed X-Git-Tag: OpenSSL_1_0_2e~162 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=9f0b86c68bb96d49301bbd6473c8235ca05ca06b;p=oweals%2Fopenssl.git Conversion to UTF-8 where needed This leaves behind files with names ending with '.iso-8859-1'. These should be safe to remove. If something went wrong when re-encoding, there will be some files with names ending with '.utf8' left behind. Reviewed-by: Rich Salz --- diff --git a/CHANGES b/CHANGES index 11ef03ebf7..27cf65ead8 100644 --- a/CHANGES +++ b/CHANGES @@ -59,9 +59,9 @@ callbacks. This issue was reported to OpenSSL by Robert Swiecki (Google), and - independently by Hanno Böck. + independently by Hanno Böck. (CVE-2015-1789) - [Emilia Käsper] + [Emilia Käsper] *) PKCS7 crash with missing EnvelopedContent @@ -75,7 +75,7 @@ This issue was reported to OpenSSL by Michal Zalewski (Google). (CVE-2015-1790) - [Emilia Käsper] + [Emilia Käsper] *) CMS verify infinite loop with unknown hash function @@ -205,7 +205,7 @@ This issue was reported to OpenSSL by Michal Zalewski (Google). (CVE-2015-0289) - [Emilia Käsper] + [Emilia Käsper] *) DoS via reachable assert in SSLv2 servers fix @@ -213,10 +213,10 @@ servers that both support SSLv2 and enable export cipher suites by sending a specially crafted SSLv2 CLIENT-MASTER-KEY message. - This issue was discovered by Sean Burford (Google) and Emilia Käsper + This issue was discovered by Sean Burford (Google) and Emilia Käsper (OpenSSL development team). (CVE-2015-0293) - [Emilia Käsper] + [Emilia Käsper] *) Empty CKE with client auth and DHE fix @@ -721,12 +721,12 @@ version does not match the session's version. Resuming with a different version, while not strictly forbidden by the RFC, is of questionable sanity and breaks all known clients. - [David Benjamin, Emilia Käsper] + [David Benjamin, Emilia Käsper] *) Tighten handling of the ChangeCipherSpec (CCS) message: reject early CCS messages during renegotiation. (Note that because renegotiation is encrypted, this early CCS was not exploitable.) - [Emilia Käsper] + [Emilia Käsper] *) Tighten client-side session ticket handling during renegotiation: ensure that the client only accepts a session ticket if the server sends @@ -737,7 +737,7 @@ Similarly, ensure that the client requires a session ticket if one was advertised in the ServerHello. Previously, a TLS client would ignore a missing NewSessionTicket message. - [Emilia Käsper] + [Emilia Käsper] Changes between 1.0.1i and 1.0.1j [15 Oct 2014] @@ -817,10 +817,10 @@ with a null pointer dereference (read) by specifying an anonymous (EC)DH ciphersuite and sending carefully crafted handshake messages. - Thanks to Felix Gröbert (Google) for discovering and researching this + Thanks to Felix Gröbert (Google) for discovering and researching this issue. (CVE-2014-3510) - [Emilia Käsper] + [Emilia Käsper] *) By sending carefully crafted DTLS packets an attacker could cause openssl to leak memory. This can be exploited through a Denial of Service attack. @@ -857,7 +857,7 @@ properly negotiated with the client. This can be exploited through a Denial of Service attack. - Thanks to Joonas Kuorilehto and Riku Hietamäki (Codenomicon) for + Thanks to Joonas Kuorilehto and Riku Hietamäki (Codenomicon) for discovering and researching this issue. (CVE-2014-5139) [Steve Henson] @@ -869,7 +869,7 @@ Thanks to Ivan Fratric (Google) for discovering this issue. (CVE-2014-3508) - [Emilia Käsper, and Steve Henson] + [Emilia Käsper, and Steve Henson] *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.) for corner cases. (Certain input points at infinity could lead to @@ -899,15 +899,15 @@ client or server. This is potentially exploitable to run arbitrary code on a vulnerable client or server. - Thanks to Jüri Aedla for reporting this issue. (CVE-2014-0195) - [Jüri Aedla, Steve Henson] + Thanks to Jüri Aedla for reporting this issue. (CVE-2014-0195) + [Jüri Aedla, Steve Henson] *) Fix bug in TLS code where clients enable anonymous ECDH ciphersuites are subject to a denial of service attack. - Thanks to Felix Gröbert and Ivan Fratric at Google for discovering + Thanks to Felix Gröbert and Ivan Fratric at Google for discovering this issue. (CVE-2014-3470) - [Felix Gröbert, Ivan Fratric, Steve Henson] + [Felix Gröbert, Ivan Fratric, Steve Henson] *) Harmonize version and its documentation. -f flag is used to display compilation flags. @@ -986,9 +986,9 @@ Thanks go to Nadhem Alfardan and Kenny Paterson of the Information Security Group at Royal Holloway, University of London (www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and - Emilia Käsper for the initial patch. + Emilia Käsper for the initial patch. (CVE-2013-0169) - [Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson] + [Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson] *) Fix flaw in AESNI handling of TLS 1.2 and 1.1 records for CBC mode ciphersuites which can be exploited in a denial of service attack. @@ -1163,7 +1163,7 @@ EC_GROUP_new_by_curve_name() will automatically use these (while EC_GROUP_new_curve_GFp() currently prefers the more flexible implementations). - [Emilia Käsper, Adam Langley, Bodo Moeller (Google)] + [Emilia Käsper, Adam Langley, Bodo Moeller (Google)] *) Use type ossl_ssize_t instad of ssize_t which isn't available on all platforms. Move ssize_t definition from e_os.h to the public @@ -1439,7 +1439,7 @@ [Adam Langley (Google)] *) Fix spurious failures in ecdsatest.c. - [Emilia Käsper (Google)] + [Emilia Käsper (Google)] *) Fix the BIO_f_buffer() implementation (which was mixing different interpretations of the '..._len' fields). @@ -1453,7 +1453,7 @@ lock to call BN_BLINDING_invert_ex, and avoids one use of BN_BLINDING_update for each BN_BLINDING structure (previously, the last update always remained unused). - [Emilia Käsper (Google)] + [Emilia Käsper (Google)] *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf. [Bob Buckholz (Google)] @@ -2262,7 +2262,7 @@ *) Add RFC 3161 compliant time stamp request creation, response generation and response verification functionality. - [Zoltán Glózik , The OpenTSA Project] + [Zoltán Glózik , The OpenTSA Project] *) Add initial support for TLS extensions, specifically for the server_name extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now @@ -3430,7 +3430,7 @@ *) BN_CTX_get() should return zero-valued bignums, providing the same initialised value as BN_new(). - [Geoff Thorpe, suggested by Ulf Möller] + [Geoff Thorpe, suggested by Ulf Möller] *) Support for inhibitAnyPolicy certificate extension. [Steve Henson] @@ -3449,7 +3449,7 @@ some point, these tighter rules will become openssl's default to improve maintainability, though the assert()s and other overheads will remain only in debugging configurations. See bn.h for more details. - [Geoff Thorpe, Nils Larsch, Ulf Möller] + [Geoff Thorpe, Nils Larsch, Ulf Möller] *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure that can only be obtained through BN_CTX_new() (which implicitly @@ -3516,7 +3516,7 @@ [Douglas Stebila (Sun Microsystems Laboratories)] *) Add the possibility to load symbols globally with DSO. - [Götz Babin-Ebell via Richard Levitte] + [Götz Babin-Ebell via Richard Levitte] *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better control of the error stack. @@ -4231,7 +4231,7 @@ [Steve Henson] *) Undo Cygwin change. - [Ulf Möller] + [Ulf Möller] *) Added support for proxy certificates according to RFC 3820. Because they may be a security thread to unaware applications, @@ -4264,11 +4264,11 @@ [Stephen Henson, reported by UK NISCC] *) Use Windows randomness collection on Cygwin. - [Ulf Möller] + [Ulf Möller] *) Fix hang in EGD/PRNGD query when communication socket is closed prematurely by EGD/PRNGD. - [Darren Tucker via Lutz Jänicke, resolves #1014] + [Darren Tucker via Lutz Jänicke, resolves #1014] *) Prompt for pass phrases when appropriate for PKCS12 input format. [Steve Henson] @@ -4730,7 +4730,7 @@ pointers passed to them whenever necessary. Otherwise it is possible the caller may have overwritten (or deallocated) the original string data when a later ENGINE operation tries to use the stored values. - [Götz Babin-Ebell ] + [Götz Babin-Ebell ] *) Improve diagnostics in file reading and command-line digests. [Ben Laurie aided and abetted by Solar Designer ] @@ -6835,7 +6835,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Bodo Moeller] *) BN_sqr() bug fix. - [Ulf Möller, reported by Jim Ellis ] + [Ulf Möller, reported by Jim Ellis ] *) Rabin-Miller test analyses assume uniformly distributed witnesses, so use BN_pseudo_rand_range() instead of using BN_pseudo_rand() @@ -6995,7 +6995,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Bodo Moeller] *) Fix OAEP check. - [Ulf Möller, Bodo Möller] + [Ulf Möller, Bodo Möller] *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5 @@ -7257,10 +7257,10 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Bodo Moeller] *) Use better test patterns in bntest. - [Ulf Möller] + [Ulf Möller] *) rand_win.c fix for Borland C. - [Ulf Möller] + [Ulf Möller] *) BN_rshift bugfix for n == 0. [Bodo Moeller] @@ -7405,14 +7405,14 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR BIO_ctrl (for BIO pairs). - [Bodo Möller] + [Bodo Möller] *) Add DSO method for VMS. [Richard Levitte] *) Bug fix: Montgomery multiplication could produce results with the wrong sign. - [Ulf Möller] + [Ulf Möller] *) Add RPM specification openssl.spec and modify it to build three packages. The default package contains applications, application @@ -7430,7 +7430,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) Don't set the two most significant bits to one when generating a random number < q in the DSA library. - [Ulf Möller] + [Ulf Möller] *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if @@ -7696,7 +7696,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) Randomness polling function for Win9x, as described in: Peter Gutmann, Software Generation of Practically Strong Random Numbers. - [Ulf Möller] + [Ulf Möller] *) Fix so PRNG is seeded in req if using an already existing DSA key. @@ -7916,7 +7916,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Steve Henson] *) Eliminate non-ANSI declarations in crypto.h and stack.h. - [Ulf Möller] + [Ulf Möller] *) Fix for SSL server purpose checking. Server checking was rejecting certificates which had extended key usage present @@ -7948,7 +7948,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Bodo Moeller] *) Bugfix for linux-elf makefile.one. - [Ulf Möller] + [Ulf Möller] *) RSA_get_default_method() will now cause a default RSA_METHOD to be chosen if one doesn't exist already. @@ -8037,7 +8037,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Steve Henson] *) des_quad_cksum() byte order bug fix. - [Ulf Möller, using the problem description in krb4-0.9.7, where + [Ulf Möller, using the problem description in krb4-0.9.7, where the solution is attributed to Derrick J Brashear ] *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly @@ -8138,7 +8138,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Rolf Haberrecker ] *) Assembler module support for Mingw32. - [Ulf Möller] + [Ulf Möller] *) Shared library support for HPUX (in shlib/). [Lutz Jaenicke and Anonymous] @@ -8157,7 +8157,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n] case was implemented. This caused BN_div_recp() to fail occasionally. - [Ulf Möller] + [Ulf Möller] *) Add an optional second argument to the set_label() in the perl assembly language builder. If this argument exists and is set @@ -8187,14 +8187,14 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Steve Henson] *) Fix potential buffer overrun problem in BIO_printf(). - [Ulf Möller, using public domain code by Patrick Powell; problem + [Ulf Möller, using public domain code by Patrick Powell; problem pointed out by David Sacerdote ] *) Support EGD . New functions RAND_egd() and RAND_status(). In the command line application, the EGD socket can be specified like a seed file using RANDFILE or -rand. - [Ulf Möller] + [Ulf Möller] *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures. Some CAs (e.g. Verisign) distribute certificates in this form. @@ -8227,7 +8227,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k #define OPENSSL_ALGORITHM_DEFINES #include defines all pertinent NO_ symbols, such as NO_IDEA, NO_RSA, etc. - [Richard Levitte, Ulf and Bodo Möller] + [Richard Levitte, Ulf and Bodo Möller] *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS record layer. @@ -8278,17 +8278,17 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) Bug fix for BN_div_recp() for numerators with an even number of bits. - [Ulf Möller] + [Ulf Möller] *) More tests in bntest.c, and changed test_bn output. - [Ulf Möller] + [Ulf Möller] *) ./config recognizes MacOS X now. [Andy Polyakov] *) Bug fix for BN_div() when the first words of num and divsor are equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0). - [Ulf Möller] + [Ulf Möller] *) Add support for various broken PKCS#8 formats, and command line options to produce them. @@ -8296,11 +8296,11 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to get temporary BIGNUMs from a BN_CTX. - [Ulf Möller] + [Ulf Möller] *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont() for p == 0. - [Ulf Möller] + [Ulf Möller] *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and include a #define from the old name to the new. The original intent @@ -8324,7 +8324,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) Source code cleanups: use const where appropriate, eliminate casts, use void * instead of char * in lhash. - [Ulf Möller] + [Ulf Möller] *) Bugfix: ssl3_send_server_key_exchange was not restartable (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of @@ -8369,13 +8369,13 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Steve Henson] *) New function BN_pseudo_rand(). - [Ulf Möller] + [Ulf Möller] *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable) bignum version of BN_from_montgomery() with the working code from SSLeay 0.9.0 (the word based version is faster anyway), and clean up the comments. - [Ulf Möller] + [Ulf Möller] *) Avoid a race condition in s2_clnt.c (function get_server_hello) that made it impossible to use the same SSL_SESSION data structure in @@ -8385,25 +8385,25 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) The return value of RAND_load_file() no longer counts bytes obtained by stat(). RAND_load_file(..., -1) is new and uses the complete file to seed the PRNG (previously an explicit byte count was required). - [Ulf Möller, Bodo Möller] + [Ulf Möller, Bodo Möller] *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes used (char *) instead of (void *) and had casts all over the place. [Steve Henson] *) Make BN_generate_prime() return NULL on error if ret!=NULL. - [Ulf Möller] + [Ulf Möller] *) Retain source code compatibility for BN_prime_checks macro: BN_is_prime(..., BN_prime_checks, ...) now uses BN_prime_checks_for_size to determine the appropriate number of Rabin-Miller iterations. - [Ulf Möller] + [Ulf Möller] *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to DH_CHECK_P_NOT_SAFE_PRIME. (Check if this is true? OpenPGP calls them "strong".) - [Ulf Möller] + [Ulf Möller] *) Merge the functionality of "dh" and "gendh" programs into a new program "dhparam". The old programs are retained for now but will handle DH keys @@ -8459,7 +8459,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) Add missing #ifndefs that caused missing symbols when building libssl as a shared library without RSA. Use #ifndef NO_SSL2 instead of NO_RSA in ssl/s2*.c. - [Kris Kennaway , modified by Ulf Möller] + [Kris Kennaway , modified by Ulf Möller] *) Precautions against using the PRNG uninitialized: RAND_bytes() now has a return value which indicates the quality of the random data @@ -8468,7 +8468,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k guaranteed to be unique but not unpredictable. RAND_add is like RAND_seed, but takes an extra argument for an entropy estimate (RAND_seed always assumes full entropy). - [Ulf Möller] + [Ulf Möller] *) Do more iterations of Rabin-Miller probable prime test (specifically, 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes @@ -8498,7 +8498,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Steve Henson] *) Honor the no-xxx Configure options when creating .DEF files. - [Ulf Möller] + [Ulf Möller] *) Add PKCS#10 attributes to field table: challengePassword, unstructuredName and unstructuredAddress. These are taken from @@ -9332,7 +9332,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) More DES library cleanups: remove references to srand/rand and delete an unused file. - [Ulf Möller] + [Ulf Möller] *) Add support for the the free Netwide assembler (NASM) under Win32, since not many people have MASM (ml) and it can be hard to obtain. @@ -9421,7 +9421,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k worked. *) Fix problems with no-hmac etc. - [Ulf Möller, pointed out by Brian Wellington ] + [Ulf Möller, pointed out by Brian Wellington ] *) New functions RSA_get_default_method(), RSA_set_method() and RSA_get_method(). These allows replacement of RSA_METHODs without having @@ -9538,7 +9538,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Ben Laurie] *) DES library cleanups. - [Ulf Möller] + [Ulf Möller] *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit @@ -9581,7 +9581,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Christian Forster ] *) config now generates no-xxx options for missing ciphers. - [Ulf Möller] + [Ulf Möller] *) Support the EBCDIC character set (work in progress). File ebcdic.c not yet included because it has a different license. @@ -9694,7 +9694,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Bodo Moeller] *) Move openssl.cnf out of lib/. - [Ulf Möller] + [Ulf Möller] *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes @@ -9751,10 +9751,10 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Ben Laurie] *) Support Borland C++ builder. - [Janez Jere , modified by Ulf Möller] + [Janez Jere , modified by Ulf Möller] *) Support Mingw32. - [Ulf Möller] + [Ulf Möller] *) SHA-1 cleanups and performance enhancements. [Andy Polyakov ] @@ -9763,7 +9763,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Andy Polyakov ] *) Accept any -xxx and +xxx compiler options in Configure. - [Ulf Möller] + [Ulf Möller] *) Update HPUX configuration. [Anonymous] @@ -9796,7 +9796,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Bodo Moeller] *) OAEP decoding bug fix. - [Ulf Möller] + [Ulf Möller] *) Support INSTALL_PREFIX for package builders, as proposed by David Harris. @@ -9819,21 +9819,21 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Niels Poppe ] *) New Configure option no- (rsa, idea, rc5, ...). - [Ulf Möller] + [Ulf Möller] *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for extension adding in x509 utility. [Steve Henson] *) Remove NOPROTO sections and error code comments. - [Ulf Möller] + [Ulf Möller] *) Partial rewrite of the DEF file generator to now parse the ANSI prototypes. [Steve Henson] *) New Configure options --prefix=DIR and --openssldir=DIR. - [Ulf Möller] + [Ulf Möller] *) Complete rewrite of the error code script(s). It is all now handled by one script at the top level which handles error code gathering, @@ -9862,7 +9862,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Steve Henson] *) Move the autogenerated header file parts to crypto/opensslconf.h. - [Ulf Möller] + [Ulf Möller] *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of 8 of keying material. Merlin has also confirmed interop with this fix @@ -9880,13 +9880,13 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Andy Polyakov ] *) Change functions to ANSI C. - [Ulf Möller] + [Ulf Möller] *) Fix typos in error codes. - [Martin Kraemer , Ulf Möller] + [Martin Kraemer , Ulf Möller] *) Remove defunct assembler files from Configure. - [Ulf Möller] + [Ulf Möller] *) SPARC v8 assembler BIGNUM implementation. [Andy Polyakov ] @@ -9923,7 +9923,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Steve Henson] *) New Configure option "rsaref". - [Ulf Möller] + [Ulf Möller] *) Don't auto-generate pem.h. [Bodo Moeller] @@ -9971,7 +9971,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) New functions DSA_do_sign and DSA_do_verify to provide access to the raw DSA values prior to ASN.1 encoding. - [Ulf Möller] + [Ulf Möller] *) Tweaks to Configure [Niels Poppe ] @@ -9981,11 +9981,11 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Steve Henson] *) New variables $(RANLIB) and $(PERL) in the Makefiles. - [Ulf Möller] + [Ulf Möller] *) New config option to avoid instructions that are illegal on the 80386. The default code is faster, but requires at least a 486. - [Ulf Möller] + [Ulf Möller] *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and SSL2_SERVER_VERSION (not used at all) macros, which are now the @@ -10524,7 +10524,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k Hagino ] *) File was opened incorrectly in randfile.c. - [Ulf Möller ] + [Ulf Möller ] *) Beginning of support for GeneralizedTime. d2i, i2d, check and print functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or @@ -10534,7 +10534,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k [Steve Henson] *) Correct Linux 1 recognition in config. - [Ulf Möller ] + [Ulf Möller ] *) Remove pointless MD5 hash when using DSA keys in ca. [Anonymous ] @@ -10681,7 +10681,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but was already fixed by Eric for 0.9.1 it seems. - [Ben Laurie - pointed out by Ulf Möller ] + [Ben Laurie - pointed out by Ulf Möller ] *) Autodetect FreeBSD3. [Ben Laurie] diff --git a/crypto/aes/asm/aes-586.pl b/crypto/aes/asm/aes-586.pl index 451d0e0ed1..60286ecb96 100755 --- a/crypto/aes/asm/aes-586.pl +++ b/crypto/aes/asm/aes-586.pl @@ -45,7 +45,7 @@ # the undertaken effort was that it appeared that in tight IA-32 # register window little-endian flavor could achieve slightly higher # Instruction Level Parallelism, and it indeed resulted in up to 15% -# better performance on most recent µ-archs... +# better performance on most recent µ-archs... # # Third version adds AES_cbc_encrypt implementation, which resulted in # up to 40% performance imrovement of CBC benchmark results. 40% was @@ -224,7 +224,7 @@ sub _data_word() { my $i; while(defined($i=shift)) { &data_word($i,$i); } } $speed_limit=512; # chunks smaller than $speed_limit are # processed with compact routine in CBC mode $small_footprint=1; # $small_footprint=1 code is ~5% slower [on - # recent µ-archs], but ~5 times smaller! + # recent µ-archs], but ~5 times smaller! # I favor compact code to minimize cache # contention and in hope to "collect" 5% back # in real-life applications... @@ -565,7 +565,7 @@ sub enctransform() # Performance is not actually extraordinary in comparison to pure # x86 code. In particular encrypt performance is virtually the same. # Decrypt performance on the other hand is 15-20% better on newer -# µ-archs [but we're thankful for *any* improvement here], and ~50% +# µ-archs [but we're thankful for *any* improvement here], and ~50% # better on PIII:-) And additionally on the pros side this code # eliminates redundant references to stack and thus relieves/ # minimizes the pressure on the memory bus. diff --git a/crypto/bn/asm/armv4-gf2m.pl b/crypto/bn/asm/armv4-gf2m.pl index 8f529c95cf..72381a7724 100644 --- a/crypto/bn/asm/armv4-gf2m.pl +++ b/crypto/bn/asm/armv4-gf2m.pl @@ -27,7 +27,7 @@ # referred below, which improves ECDH and ECDSA verify benchmarks # by 18-40%. # -# Câmara, D.; Gouvêa, C. P. L.; López, J. & Dahab, R.: Fast Software +# Câmara, D.; Gouvêa, C. P. L.; López, J. & Dahab, R.: Fast Software # Polynomial Multiplication on ARM Processors using the NEON Engine. # # http://conradoplg.cryptoland.net/files/2010/12/mocrysen13.pdf @@ -136,7 +136,7 @@ ___ ################ # void bn_GF2m_mul_2x2(BN_ULONG *r, # BN_ULONG a1,BN_ULONG a0, -# BN_ULONG b1,BN_ULONG b0); # r[3..0]=a1a0·b1b0 +# BN_ULONG b1,BN_ULONG b0); # r[3..0]=a1a0·b1b0 { $code.=<<___; .global bn_GF2m_mul_2x2 @@ -159,7 +159,7 @@ $code.=<<___; mov $mask,#7<<2 sub sp,sp,#32 @ allocate tab[8] - bl mul_1x1_ialu @ a1·b1 + bl mul_1x1_ialu @ a1·b1 str $lo,[$ret,#8] str $hi,[$ret,#12] @@ -169,13 +169,13 @@ $code.=<<___; eor r2,r2,$a eor $b,$b,r3 eor $a,$a,r2 - bl mul_1x1_ialu @ a0·b0 + bl mul_1x1_ialu @ a0·b0 str $lo,[$ret] str $hi,[$ret,#4] eor $a,$a,r2 eor $b,$b,r3 - bl mul_1x1_ialu @ (a1+a0)·(b1+b0) + bl mul_1x1_ialu @ (a1+a0)·(b1+b0) ___ @r=map("r$_",(6..9)); $code.=<<___; diff --git a/crypto/bn/asm/ia64.S b/crypto/bn/asm/ia64.S index 951abc53ea..c0cee8211c 100644 --- a/crypto/bn/asm/ia64.S +++ b/crypto/bn/asm/ia64.S @@ -568,7 +568,7 @@ bn_sqr_comba8: // I've estimated this routine to run in ~120 ticks, but in reality // (i.e. according to ar.itc) it takes ~160 ticks. Are those extra // cycles consumed for instructions fetch? Or did I misinterpret some -// clause in Itanium µ-architecture manual? Comments are welcomed and +// clause in Itanium µ-architecture manual? Comments are welcomed and // highly appreciated. // // On Itanium 2 it takes ~190 ticks. This is because of stalls on diff --git a/crypto/bn/asm/s390x-gf2m.pl b/crypto/bn/asm/s390x-gf2m.pl index cd9f13eca2..9d18d40e77 100644 --- a/crypto/bn/asm/s390x-gf2m.pl +++ b/crypto/bn/asm/s390x-gf2m.pl @@ -172,19 +172,19 @@ ___ if ($SIZE_T==8) { my @r=map("%r$_",(6..9)); $code.=<<___; - bras $ra,_mul_1x1 # a1·b1 + bras $ra,_mul_1x1 # a1·b1 stmg $lo,$hi,16($rp) lg $a,`$stdframe+128+4*$SIZE_T`($sp) lg $b,`$stdframe+128+6*$SIZE_T`($sp) - bras $ra,_mul_1x1 # a0·b0 + bras $ra,_mul_1x1 # a0·b0 stmg $lo,$hi,0($rp) lg $a,`$stdframe+128+3*$SIZE_T`($sp) lg $b,`$stdframe+128+5*$SIZE_T`($sp) xg $a,`$stdframe+128+4*$SIZE_T`($sp) xg $b,`$stdframe+128+6*$SIZE_T`($sp) - bras $ra,_mul_1x1 # (a0+a1)·(b0+b1) + bras $ra,_mul_1x1 # (a0+a1)·(b0+b1) lmg @r[0],@r[3],0($rp) xgr $lo,$hi diff --git a/crypto/bn/asm/x86-gf2m.pl b/crypto/bn/asm/x86-gf2m.pl index 808a1e5969..b579530272 100644 --- a/crypto/bn/asm/x86-gf2m.pl +++ b/crypto/bn/asm/x86-gf2m.pl @@ -14,7 +14,7 @@ # the time being... Except that it has three code paths: pure integer # code suitable for any x86 CPU, MMX code suitable for PIII and later # and PCLMULQDQ suitable for Westmere and later. Improvement varies -# from one benchmark and µ-arch to another. Below are interval values +# from one benchmark and µ-arch to another. Below are interval values # for 163- and 571-bit ECDH benchmarks relative to compiler-generated # code: # @@ -226,22 +226,22 @@ if ($sse2) { &push ("edi"); &mov ($a,&wparam(1)); &mov ($b,&wparam(3)); - &call ("_mul_1x1_mmx"); # a1·b1 + &call ("_mul_1x1_mmx"); # a1·b1 &movq ("mm7",$R); &mov ($a,&wparam(2)); &mov ($b,&wparam(4)); - &call ("_mul_1x1_mmx"); # a0·b0 + &call ("_mul_1x1_mmx"); # a0·b0 &movq ("mm6",$R); &mov ($a,&wparam(1)); &mov ($b,&wparam(3)); &xor ($a,&wparam(2)); &xor ($b,&wparam(4)); - &call ("_mul_1x1_mmx"); # (a0+a1)·(b0+b1) + &call ("_mul_1x1_mmx"); # (a0+a1)·(b0+b1) &pxor ($R,"mm7"); &mov ($a,&wparam(0)); - &pxor ($R,"mm6"); # (a0+a1)·(b0+b1)-a1·b1-a0·b0 + &pxor ($R,"mm6"); # (a0+a1)·(b0+b1)-a1·b1-a0·b0 &movq ($A,$R); &psllq ($R,32); @@ -266,13 +266,13 @@ if ($sse2) { &mov ($a,&wparam(1)); &mov ($b,&wparam(3)); - &call ("_mul_1x1_ialu"); # a1·b1 + &call ("_mul_1x1_ialu"); # a1·b1 &mov (&DWP(8,"esp"),$lo); &mov (&DWP(12,"esp"),$hi); &mov ($a,&wparam(2)); &mov ($b,&wparam(4)); - &call ("_mul_1x1_ialu"); # a0·b0 + &call ("_mul_1x1_ialu"); # a0·b0 &mov (&DWP(0,"esp"),$lo); &mov (&DWP(4,"esp"),$hi); @@ -280,7 +280,7 @@ if ($sse2) { &mov ($b,&wparam(3)); &xor ($a,&wparam(2)); &xor ($b,&wparam(4)); - &call ("_mul_1x1_ialu"); # (a0+a1)·(b0+b1) + &call ("_mul_1x1_ialu"); # (a0+a1)·(b0+b1) &mov ("ebp",&wparam(0)); @r=("ebx","ecx","edi","esi"); diff --git a/crypto/bn/asm/x86_64-gcc.c b/crypto/bn/asm/x86_64-gcc.c index d5488866e0..d77dc433d4 100644 --- a/crypto/bn/asm/x86_64-gcc.c +++ b/crypto/bn/asm/x86_64-gcc.c @@ -65,7 +65,7 @@ # undef mul_add /*- - * "m"(a), "+m"(r) is the way to favor DirectPath µ-code; + * "m"(a), "+m"(r) is the way to favor DirectPath µ-code; * "g"(0) let the compiler to decide where does it * want to keep the value of zero; */ diff --git a/crypto/bn/asm/x86_64-gf2m.pl b/crypto/bn/asm/x86_64-gf2m.pl index 226c66c35e..42bbec2fb7 100644 --- a/crypto/bn/asm/x86_64-gf2m.pl +++ b/crypto/bn/asm/x86_64-gf2m.pl @@ -13,7 +13,7 @@ # in bn_gf2m.c. It's kind of low-hanging mechanical port from C for # the time being... Except that it has two code paths: code suitable # for any x86_64 CPU and PCLMULQDQ one suitable for Westmere and -# later. Improvement varies from one benchmark and µ-arch to another. +# later. Improvement varies from one benchmark and µ-arch to another. # Vanilla code path is at most 20% faster than compiler-generated code # [not very impressive], while PCLMULQDQ - whole 85%-160% better on # 163- and 571-bit ECDH benchmarks on Intel CPUs. Keep in mind that @@ -184,13 +184,13 @@ ___ $code.=<<___; movdqa %xmm0,%xmm4 movdqa %xmm1,%xmm5 - pclmulqdq \$0,%xmm1,%xmm0 # a1·b1 + pclmulqdq \$0,%xmm1,%xmm0 # a1·b1 pxor %xmm2,%xmm4 pxor %xmm3,%xmm5 - pclmulqdq \$0,%xmm3,%xmm2 # a0·b0 - pclmulqdq \$0,%xmm5,%xmm4 # (a0+a1)·(b0+b1) + pclmulqdq \$0,%xmm3,%xmm2 # a0·b0 + pclmulqdq \$0,%xmm5,%xmm4 # (a0+a1)·(b0+b1) xorps %xmm0,%xmm4 - xorps %xmm2,%xmm4 # (a0+a1)·(b0+b1)-a0·b0-a1·b1 + xorps %xmm2,%xmm4 # (a0+a1)·(b0+b1)-a0·b0-a1·b1 movdqa %xmm4,%xmm5 pslldq \$8,%xmm4 psrldq \$8,%xmm5 @@ -225,13 +225,13 @@ $code.=<<___; mov \$0xf,$mask mov $a1,$a mov $b1,$b - call _mul_1x1 # a1·b1 + call _mul_1x1 # a1·b1 mov $lo,16(%rsp) mov $hi,24(%rsp) mov 48(%rsp),$a mov 64(%rsp),$b - call _mul_1x1 # a0·b0 + call _mul_1x1 # a0·b0 mov $lo,0(%rsp) mov $hi,8(%rsp) @@ -239,7 +239,7 @@ $code.=<<___; mov 56(%rsp),$b xor 48(%rsp),$a xor 64(%rsp),$b - call _mul_1x1 # (a0+a1)·(b0+b1) + call _mul_1x1 # (a0+a1)·(b0+b1) ___ @r=("%rbx","%rcx","%rdi","%rsi"); $code.=<<___; diff --git a/crypto/modes/asm/ghash-armv4.pl b/crypto/modes/asm/ghash-armv4.pl index 77fbf34465..21f877a1f1 100644 --- a/crypto/modes/asm/ghash-armv4.pl +++ b/crypto/modes/asm/ghash-armv4.pl @@ -45,7 +45,7 @@ # processes one byte in 8.45 cycles, A9 - in 10.2, Snapdragon S4 - # in 9.33. # -# Câmara, D.; Gouvêa, C. P. L.; López, J. & Dahab, R.: Fast Software +# Câmara, D.; Gouvêa, C. P. L.; López, J. & Dahab, R.: Fast Software # Polynomial Multiplication on ARM Processors using the NEON Engine. # # http://conradoplg.cryptoland.net/files/2010/12/mocrysen13.pdf @@ -432,12 +432,12 @@ gcm_ghash_neon: veor $IN,$Xl @ inp^=Xi .Lgmult_neon: ___ - &clmul64x64 ($Xl,$Hlo,"$IN#lo"); # H.lo·Xi.lo + &clmul64x64 ($Xl,$Hlo,"$IN#lo"); # H.lo·Xi.lo $code.=<<___; veor $IN#lo,$IN#lo,$IN#hi @ Karatsuba pre-processing ___ - &clmul64x64 ($Xm,$Hhl,"$IN#lo"); # (H.lo+H.hi)·(Xi.lo+Xi.hi) - &clmul64x64 ($Xh,$Hhi,"$IN#hi"); # H.hi·Xi.hi + &clmul64x64 ($Xm,$Hhl,"$IN#lo"); # (H.lo+H.hi)·(Xi.lo+Xi.hi) + &clmul64x64 ($Xh,$Hhi,"$IN#hi"); # H.hi·Xi.hi $code.=<<___; veor $Xm,$Xm,$Xl @ Karatsuba post-processing veor $Xm,$Xm,$Xh diff --git a/crypto/modes/asm/ghash-sparcv9.pl b/crypto/modes/asm/ghash-sparcv9.pl index 0365e0f1ff..5bc2870201 100644 --- a/crypto/modes/asm/ghash-sparcv9.pl +++ b/crypto/modes/asm/ghash-sparcv9.pl @@ -379,7 +379,7 @@ gcm_init_vis3: or $V,%lo(0xA0406080),$V or %l0,%lo(0x20C0E000),%l0 sllx $V,32,$V - or %l0,$V,$V ! (0xE0·i)&0xff=0xA040608020C0E000 + or %l0,$V,$V ! (0xE0·i)&0xff=0xA040608020C0E000 stx $V,[%i0+16] ret @@ -399,7 +399,7 @@ gcm_gmult_vis3: mov 0xE1,%l7 sllx %l7,57,$xE1 ! 57 is not a typo - ldx [$Htable+16],$V ! (0xE0·i)&0xff=0xA040608020C0E000 + ldx [$Htable+16],$V ! (0xE0·i)&0xff=0xA040608020C0E000 xor $Hhi,$Hlo,$Hhl ! Karatsuba pre-processing xmulx $Xlo,$Hlo,$C0 @@ -411,9 +411,9 @@ gcm_gmult_vis3: xmulx $Xhi,$Hhi,$Xhi sll $C0,3,$sqr - srlx $V,$sqr,$sqr ! ·0xE0 [implicit &(7<<3)] + srlx $V,$sqr,$sqr ! ·0xE0 [implicit &(7<<3)] xor $C0,$sqr,$sqr - sllx $sqr,57,$sqr ! ($C0·0xE1)<<1<<56 [implicit &0x7f] + sllx $sqr,57,$sqr ! ($C0·0xE1)<<1<<56 [implicit &0x7f] xor $C0,$C1,$C1 ! Karatsuba post-processing xor $Xlo,$C2,$C2 @@ -423,7 +423,7 @@ gcm_gmult_vis3: xor $Xhi,$C2,$C2 xor $Xhi,$C1,$C1 - xmulxhi $C0,$xE1,$Xlo ! ·0xE1<<1<<56 + xmulxhi $C0,$xE1,$Xlo ! ·0xE1<<1<<56 xor $C0,$C2,$C2 xmulx $C1,$xE1,$C0 xor $C1,$C3,$C3 @@ -453,7 +453,7 @@ gcm_ghash_vis3: mov 0xE1,%l7 sllx %l7,57,$xE1 ! 57 is not a typo - ldx [$Htable+16],$V ! (0xE0·i)&0xff=0xA040608020C0E000 + ldx [$Htable+16],$V ! (0xE0·i)&0xff=0xA040608020C0E000 and $inp,7,$shl andn $inp,7,$inp @@ -490,9 +490,9 @@ gcm_ghash_vis3: xmulx $Xhi,$Hhi,$Xhi sll $C0,3,$sqr - srlx $V,$sqr,$sqr ! ·0xE0 [implicit &(7<<3)] + srlx $V,$sqr,$sqr ! ·0xE0 [implicit &(7<<3)] xor $C0,$sqr,$sqr - sllx $sqr,57,$sqr ! ($C0·0xE1)<<1<<56 [implicit &0x7f] + sllx $sqr,57,$sqr ! ($C0·0xE1)<<1<<56 [implicit &0x7f] xor $C0,$C1,$C1 ! Karatsuba post-processing xor $Xlo,$C2,$C2 @@ -502,7 +502,7 @@ gcm_ghash_vis3: xor $Xhi,$C2,$C2 xor $Xhi,$C1,$C1 - xmulxhi $C0,$xE1,$Xlo ! ·0xE1<<1<<56 + xmulxhi $C0,$xE1,$Xlo ! ·0xE1<<1<<56 xor $C0,$C2,$C2 xmulx $C1,$xE1,$C0 xor $C1,$C3,$C3 diff --git a/crypto/modes/asm/ghash-x86.pl b/crypto/modes/asm/ghash-x86.pl index 23a5527b30..0269169fa7 100644 --- a/crypto/modes/asm/ghash-x86.pl +++ b/crypto/modes/asm/ghash-x86.pl @@ -358,7 +358,7 @@ $S=12; # shift factor for rem_4bit # effective address calculation and finally merge of value to Z.hi. # Reference to rem_4bit is scheduled so late that I had to >>4 # rem_4bit elements. This resulted in 20-45% procent improvement -# on contemporary µ-archs. +# on contemporary µ-archs. { my $cnt; my $rem_4bit = "eax"; diff --git a/crypto/modes/asm/ghash-x86_64.pl b/crypto/modes/asm/ghash-x86_64.pl index 6e656ca13b..5a7ce39486 100644 --- a/crypto/modes/asm/ghash-x86_64.pl +++ b/crypto/modes/asm/ghash-x86_64.pl @@ -576,15 +576,15 @@ $code.=<<___ if (0 || (&reduction_alg9($Xhi,$Xi)&&0)); # experimental alternative. special thing about is that there # no dependency between the two multiplications... mov \$`0xE1<<1`,%eax - mov \$0xA040608020C0E000,%r10 # ((7..0)·0xE0)&0xff + mov \$0xA040608020C0E000,%r10 # ((7..0)·0xE0)&0xff mov \$0x07,%r11d movq %rax,$T1 movq %r10,$T2 movq %r11,$T3 # borrow $T3 pand $Xi,$T3 - pshufb $T3,$T2 # ($Xi&7)·0xE0 + pshufb $T3,$T2 # ($Xi&7)·0xE0 movq %rax,$T3 - pclmulqdq \$0x00,$Xi,$T1 # ·(0xE1<<1) + pclmulqdq \$0x00,$Xi,$T1 # ·(0xE1<<1) pxor $Xi,$T2 pslldq \$15,$T2 paddd $T2,$T2 # <<(64+56+1) @@ -657,7 +657,7 @@ $code.=<<___; je .Lskip4x sub \$0x30,$len - mov \$0xA040608020C0E000,%rax # ((7..0)·0xE0)&0xff + mov \$0xA040608020C0E000,%rax # ((7..0)·0xE0)&0xff movdqu 0x30($Htbl),$Hkey3 movdqu 0x40($Htbl),$Hkey4 diff --git a/crypto/modes/asm/ghashp8-ppc.pl b/crypto/modes/asm/ghashp8-ppc.pl index e76a58c343..71457cf4fc 100755 --- a/crypto/modes/asm/ghashp8-ppc.pl +++ b/crypto/modes/asm/ghashp8-ppc.pl @@ -118,9 +118,9 @@ $code=<<___; le?vperm $IN,$IN,$IN,$lemask vxor $zero,$zero,$zero - vpmsumd $Xl,$IN,$Hl # H.lo·Xi.lo - vpmsumd $Xm,$IN,$H # H.hi·Xi.lo+H.lo·Xi.hi - vpmsumd $Xh,$IN,$Hh # H.hi·Xi.hi + vpmsumd $Xl,$IN,$Hl # H.lo·Xi.lo + vpmsumd $Xm,$IN,$H # H.hi·Xi.lo+H.lo·Xi.hi + vpmsumd $Xh,$IN,$Hh # H.hi·Xi.hi vpmsumd $t2,$Xl,$xC2 # 1st phase @@ -178,11 +178,11 @@ $code=<<___; .align 5 Loop: subic $len,$len,16 - vpmsumd $Xl,$IN,$Hl # H.lo·Xi.lo + vpmsumd $Xl,$IN,$Hl # H.lo·Xi.lo subfe. r0,r0,r0 # borrow?-1:0 - vpmsumd $Xm,$IN,$H # H.hi·Xi.lo+H.lo·Xi.hi + vpmsumd $Xm,$IN,$H # H.hi·Xi.lo+H.lo·Xi.hi and r0,r0,$len - vpmsumd $Xh,$IN,$Hh # H.hi·Xi.hi + vpmsumd $Xh,$IN,$Hh # H.hi·Xi.hi add $inp,$inp,r0 vpmsumd $t2,$Xl,$xC2 # 1st phase diff --git a/crypto/modes/asm/ghashv8-armx.pl b/crypto/modes/asm/ghashv8-armx.pl index 0b9cd7359f..0886d21807 100644 --- a/crypto/modes/asm/ghashv8-armx.pl +++ b/crypto/modes/asm/ghashv8-armx.pl @@ -135,10 +135,10 @@ gcm_gmult_v8: #endif vext.8 $IN,$t1,$t1,#8 - vpmull.p64 $Xl,$H,$IN @ H.lo·Xi.lo + vpmull.p64 $Xl,$H,$IN @ H.lo·Xi.lo veor $t1,$t1,$IN @ Karatsuba pre-processing - vpmull2.p64 $Xh,$H,$IN @ H.hi·Xi.hi - vpmull.p64 $Xm,$Hhl,$t1 @ (H.lo+H.hi)·(Xi.lo+Xi.hi) + vpmull2.p64 $Xh,$H,$IN @ H.hi·Xi.hi + vpmull.p64 $Xm,$Hhl,$t1 @ (H.lo+H.hi)·(Xi.lo+Xi.hi) vext.8 $t1,$Xl,$Xh,#8 @ Karatsuba post-processing veor $t2,$Xl,$Xh @@ -226,7 +226,7 @@ $code.=<<___; #endif vext.8 $In,$t1,$t1,#8 veor $IN,$IN,$Xl @ I[i]^=Xi - vpmull.p64 $Xln,$H,$In @ H·Ii+1 + vpmull.p64 $Xln,$H,$In @ H·Ii+1 veor $t1,$t1,$In @ Karatsuba pre-processing vpmull2.p64 $Xhn,$H,$In b .Loop_mod2x_v8 @@ -235,14 +235,14 @@ $code.=<<___; .Loop_mod2x_v8: vext.8 $t2,$IN,$IN,#8 subs $len,$len,#32 @ is there more data? - vpmull.p64 $Xl,$H2,$IN @ H^2.lo·Xi.lo + vpmull.p64 $Xl,$H2,$IN @ H^2.lo·Xi.lo cclr $inc,lo @ is it time to zero $inc? vpmull.p64 $Xmn,$Hhl,$t1 veor $t2,$t2,$IN @ Karatsuba pre-processing - vpmull2.p64 $Xh,$H2,$IN @ H^2.hi·Xi.hi + vpmull2.p64 $Xh,$H2,$IN @ H^2.hi·Xi.hi veor $Xl,$Xl,$Xln @ accumulate - vpmull2.p64 $Xm,$Hhl,$t2 @ (H^2.lo+H^2.hi)·(Xi.lo+Xi.hi) + vpmull2.p64 $Xm,$Hhl,$t2 @ (H^2.lo+H^2.hi)·(Xi.lo+Xi.hi) vld1.64 {$t0},[$inp],$inc @ load [rotated] I[i+2] veor $Xh,$Xh,$Xhn @@ -267,7 +267,7 @@ $code.=<<___; vext.8 $In,$t1,$t1,#8 vext.8 $IN,$t0,$t0,#8 veor $Xl,$Xm,$t2 - vpmull.p64 $Xln,$H,$In @ H·Ii+1 + vpmull.p64 $Xln,$H,$In @ H·Ii+1 veor $IN,$IN,$Xh @ accumulate $IN early vext.8 $t2,$Xl,$Xl,#8 @ 2nd phase of reduction @@ -291,10 +291,10 @@ $code.=<<___; veor $IN,$IN,$Xl @ inp^=Xi veor $t1,$t0,$t2 @ $t1 is rotated inp^Xi - vpmull.p64 $Xl,$H,$IN @ H.lo·Xi.lo + vpmull.p64 $Xl,$H,$IN @ H.lo·Xi.lo veor $t1,$t1,$IN @ Karatsuba pre-processing - vpmull2.p64 $Xh,$H,$IN @ H.hi·Xi.hi - vpmull.p64 $Xm,$Hhl,$t1 @ (H.lo+H.hi)·(Xi.lo+Xi.hi) + vpmull2.p64 $Xh,$H,$IN @ H.hi·Xi.hi + vpmull.p64 $Xm,$Hhl,$t1 @ (H.lo+H.hi)·(Xi.lo+Xi.hi) vext.8 $t1,$Xl,$Xh,#8 @ Karatsuba post-processing veor $t2,$Xl,$Xh diff --git a/crypto/rc4/asm/rc4-x86_64.pl b/crypto/rc4/asm/rc4-x86_64.pl index 75750dbf33..20722d3e72 100755 --- a/crypto/rc4/asm/rc4-x86_64.pl +++ b/crypto/rc4/asm/rc4-x86_64.pl @@ -56,7 +56,7 @@ # achieves respectful 432MBps on 2.8GHz processor now. For reference. # If executed on Xeon, current RC4_CHAR code-path is 2.7x faster than # RC4_INT code-path. While if executed on Opteron, it's only 25% -# slower than the RC4_INT one [meaning that if CPU µ-arch detection +# slower than the RC4_INT one [meaning that if CPU µ-arch detection # is not implemented, then this final RC4_CHAR code-path should be # preferred, as it provides better *all-round* performance]. diff --git a/crypto/sha/asm/sha1-586.pl b/crypto/sha/asm/sha1-586.pl index 4895eb3ddf..e0b5d83b62 100644 --- a/crypto/sha/asm/sha1-586.pl +++ b/crypto/sha/asm/sha1-586.pl @@ -66,9 +66,9 @@ # switch to AVX alone improves performance by as little as 4% in # comparison to SSSE3 code path. But below result doesn't look like # 4% improvement... Trouble is that Sandy Bridge decodes 'ro[rl]' as -# pair of µ-ops, and it's the additional µ-ops, two per round, that +# pair of µ-ops, and it's the additional µ-ops, two per round, that # make it run slower than Core2 and Westmere. But 'sh[rl]d' is decoded -# as single µ-op by Sandy Bridge and it's replacing 'ro[rl]' with +# as single µ-op by Sandy Bridge and it's replacing 'ro[rl]' with # equivalent 'sh[rl]d' that is responsible for the impressive 5.1 # cycles per processed byte. But 'sh[rl]d' is not something that used # to be fast, nor does it appear to be fast in upcoming Bulldozer diff --git a/crypto/sha/asm/sha256-586.pl b/crypto/sha/asm/sha256-586.pl index 6462e45ba7..e907714381 100644 --- a/crypto/sha/asm/sha256-586.pl +++ b/crypto/sha/asm/sha256-586.pl @@ -10,7 +10,7 @@ # SHA256 block transform for x86. September 2007. # # Performance improvement over compiler generated code varies from -# 10% to 40% [see below]. Not very impressive on some µ-archs, but +# 10% to 40% [see below]. Not very impressive on some µ-archs, but # it's 5 times smaller and optimizies amount of writes. # # May 2012. diff --git a/crypto/sha/asm/sha512-586.pl b/crypto/sha/asm/sha512-586.pl index e96ec00314..2f6a202c37 100644 --- a/crypto/sha/asm/sha512-586.pl +++ b/crypto/sha/asm/sha512-586.pl @@ -37,7 +37,7 @@ # # IALU code-path is optimized for elder Pentiums. On vanilla Pentium # performance improvement over compiler generated code reaches ~60%, -# while on PIII - ~35%. On newer µ-archs improvement varies from 15% +# while on PIII - ~35%. On newer µ-archs improvement varies from 15% # to 50%, but it's less important as they are expected to execute SSE2 # code-path, which is commonly ~2-3x faster [than compiler generated # code]. SSE2 code-path is as fast as original sha512-sse2.pl, even diff --git a/crypto/sparccpuid.S b/crypto/sparccpuid.S index eea2006fba..7b12ec2931 100644 --- a/crypto/sparccpuid.S +++ b/crypto/sparccpuid.S @@ -123,7 +123,7 @@ OPENSSL_wipe_cpu: fmovs %f1,%f3 fmovs %f0,%f2 - add %fp,BIAS,%i0 ! return pointer to caller´s top of stack + add %fp,BIAS,%i0 ! return pointer to caller´s top of stack ret restore diff --git a/crypto/whrlpool/asm/wp-mmx.pl b/crypto/whrlpool/asm/wp-mmx.pl index c584e5b92b..7725951d6b 100644 --- a/crypto/whrlpool/asm/wp-mmx.pl +++ b/crypto/whrlpool/asm/wp-mmx.pl @@ -16,7 +16,7 @@ # table]. I stick to value of 2 for two reasons: 1. smaller table # minimizes cache trashing and thus mitigates the hazard of side- # channel leakage similar to AES cache-timing one; 2. performance -# gap among different µ-archs is smaller. +# gap among different µ-archs is smaller. # # Performance table lists rounded amounts of CPU cycles spent by # whirlpool_block_mmx routine on single 64 byte input block, i.e. diff --git a/crypto/x509v3/v3_pci.c b/crypto/x509v3/v3_pci.c index fe0d8063d1..48ac0959cb 100644 --- a/crypto/x509v3/v3_pci.c +++ b/crypto/x509v3/v3_pci.c @@ -3,7 +3,7 @@ * Contributed to the OpenSSL Project 2004 by Richard Levitte * (richard@levitte.org) */ -/* Copyright (c) 2004 Kungliga Tekniska Högskolan +/* Copyright (c) 2004 Kungliga Tekniska Högskolan * (Royal Institute of Technology, Stockholm, Sweden). * All rights reserved. * diff --git a/crypto/x509v3/v3_pcia.c b/crypto/x509v3/v3_pcia.c index 350b39889f..43fd362aed 100644 --- a/crypto/x509v3/v3_pcia.c +++ b/crypto/x509v3/v3_pcia.c @@ -3,7 +3,7 @@ * Contributed to the OpenSSL Project 2004 by Richard Levitte * (richard@levitte.org) */ -/* Copyright (c) 2004 Kungliga Tekniska Högskolan +/* Copyright (c) 2004 Kungliga Tekniska Högskolan * (Royal Institute of Technology, Stockholm, Sweden). * All rights reserved. * diff --git a/demos/easy_tls/README b/demos/easy_tls/README index 816a58009c..ee89dfb942 100644 --- a/demos/easy_tls/README +++ b/demos/easy_tls/README @@ -62,4 +62,4 @@ As noted above, easy_tls.c will be changed to become a library one day, which means that future revisions will not be fully compatible to the current version. -Bodo Möller +Bodo Möller diff --git a/util/mkrc.pl b/util/mkrc.pl index 0ceadcf8d1..83ee6a4167 100755 --- a/util/mkrc.pl +++ b/util/mkrc.pl @@ -57,7 +57,7 @@ BEGIN VALUE "ProductVersion", "$version\\0" // Optional: //VALUE "Comments", "\\0" - VALUE "LegalCopyright", "Copyright © 1998-2006 The OpenSSL Project. Copyright © 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved.\\0" + VALUE "LegalCopyright", "Copyright © 1998-2006 The OpenSSL Project. Copyright © 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved.\\0" //VALUE "LegalTrademarks", "\\0" //VALUE "PrivateBuild", "\\0" //VALUE "SpecialBuild", "\\0"