From: Paul Gortmaker Date: Fri, 18 Sep 2009 23:08:41 +0000 (-0400) Subject: sbc8548: enable access to second bank of flash X-Git-Tag: v2009.11-rc1~93^2~20 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=9b3ba24f18900633a394416cc056c44a1a6eb754;p=oweals%2Fu-boot.git sbc8548: enable access to second bank of flash The sbc8548 has a 64MB SODIMM flash module off of CS6 that previously wasn't enumerated by u-boot. There were already BR6/OR6 settings for it [used by cpu_init_f()] but there was no TLB entry and it wasn't in the list of flash banks reported to u-boot. The location of the 64MB flash is "pulled back" 8MB from a 64MB boundary, in order to allow address space for the 8MB boot flash that is at the end of 32 bit address space. This means creating two 4MB TLB entries for the 8MB chunk, and then expanding the original boot flash entry to 64MB in order to cover the 8MB boot flash and the remainder (56MB) of the user flash. Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c index ddcb532eef..a0b4e36e7b 100644 --- a/board/sbc8548/tlb.c +++ b/board/sbc8548/tlb.c @@ -45,13 +45,15 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 0, BOOKE_PAGESZ_4K, 0), /* - * TLB 0: 16M Non-cacheable, guarded - * 0xff800000 16M TLB for 8MB FLASH + * TLB 0: 64M Non-cacheable, guarded + * 0xfc000000 56M 8MB -> 64MB of user flash + * 0xff800000 8M boot FLASH * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x800000, + CONFIG_SYS_ALT_FLASH + 0x800000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_16M, 1), + 0, 0, BOOKE_PAGESZ_64M, 1), /* * TLB 1: 256M Non-cacheable, guarded @@ -107,6 +109,24 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_16M, 1), + + /* + * TLB 7: 4M Non-cacheable, guarded + * 0xfb800000 4M 1st 4MB block of 64MB user FLASH + */ + SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_4M, 1), + + /* + * TLB 8: 4M Non-cacheable, guarded + * 0xfbc00000 4M 2nd 4MB block of 64MB user FLASH + */ + SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x400000, + CONFIG_SYS_ALT_FLASH + 0x400000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 8, BOOKE_PAGESZ_4M, 1), + }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 3d05afbba1..5c1411f668 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -163,6 +163,7 @@ */ #define CONFIG_SYS_BOOT_BLOCK 0xff800000 /* start of 8MB Flash */ +#define CONFIG_SYS_ALT_FLASH 0xfb800000 /* 64MB "user" flash */ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK /* start of FLASH 16M */ #define CONFIG_SYS_BR0_PRELIM 0xff800801 @@ -171,9 +172,10 @@ #define CONFIG_SYS_OR0_PRELIM 0xff806e65 #define CONFIG_SYS_OR6_PRELIM 0xf8006e65 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \ + CONFIG_SYS_ALT_FLASH} +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ #undef CONFIG_SYS_FLASH_CHECKSUM #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */