From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Thu, 21 May 2015 22:24:05 +0000 (-0300)
Subject: wandboard: Add board revision detection support
X-Git-Tag: v2015.07-rc2~6^2~15
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=9a8804a85e37d774419ee6452a90cc6e57d925f3;p=oweals%2Fu-boot.git

wandboard: Add board revision detection support

There are two revisions of wandboard: version B1 and C1.

Add the revision detection support, so that the correct dtb file can
be automatically loaded.

Based on the patch from Richard Hu <hakahu@gmail.com>.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-By: Vagrant Cascadian <vagrant@aikidev.net>
---

diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index 90625ab9e0..0af63d291f 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -50,6 +50,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define USDHC1_CD_GPIO		IMX_GPIO_NR(1, 2)
 #define USDHC3_CD_GPIO		IMX_GPIO_NR(3, 9)
 #define ETH_PHY_RESET		IMX_GPIO_NR(3, 29)
+#define REV_DETECTION		IMX_GPIO_NR(2, 28)
 
 int dram_init(void)
 {
@@ -105,6 +106,10 @@ static iomux_v3_cfg_t const enet_pads[] = {
 	IOMUX_PADS(PAD_EIM_D29__GPIO3_IO29    | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
+static iomux_v3_cfg_t const rev_detection_pad[] = {
+	IOMUX_PADS(PAD_EIM_EB0__GPIO2_IO28  | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
 static void setup_iomux_uart(void)
 {
 	SETUP_IOMUX_PADS(uart1_pads);
@@ -393,6 +398,17 @@ static const struct boot_mode board_boot_modes[] = {
 };
 #endif
 
+static bool is_revc1(void)
+{
+	SETUP_IOMUX_PADS(rev_detection_pad);
+	gpio_direction_input(REV_DETECTION);
+
+	if (gpio_get_value(REV_DETECTION))
+		return true;
+	else
+		return false;
+}
+
 int board_late_init(void)
 {
 #ifdef CONFIG_CMD_BMODE
@@ -404,6 +420,11 @@ int board_late_init(void)
 		setenv("board_rev", "MX6Q");
 	else
 		setenv("board_rev", "MX6DL");
+
+	if (is_revc1())
+		setenv("board_name", "C1");
+	else
+		setenv("board_name", "B1");
 #endif
 	return 0;
 }
@@ -424,7 +445,10 @@ int board_init(void)
 
 int checkboard(void)
 {
-	puts("Board: Wandboard\n");
+	if (is_revc1())
+		puts("Board: Wandboard rev C1\n");
+	else
+		puts("Board: Wandboard rev B1\n");
 
 	return 0;
 }
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 69590ad884..0cc0f034ac 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -194,10 +194,14 @@
 			"bootz; " \
 		"fi;\0" \
 	"findfdt="\
-		"if test $board_rev = MX6Q ; then " \
+		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
-		"if test $board_rev = MX6DL ; then " \
+		"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
 			"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
+		"if test $board_name = B1 && test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
+		"if test $board_name = B1 && test $board_rev = MX6DL ; then " \
+			"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi; \0" \