From: Luo chongjun Date: Mon, 5 Nov 2018 02:03:05 +0000 (+0800) Subject: ath79: add support for GL-iNet GL-X750 X-Git-Tag: v19.07.0-rc1~2125 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=9989fd5154fd;p=oweals%2Fopenwrt.git ath79: add support for GL-iNet GL-X750 this patch adds supports for GL-X750. Specification: - SOC: QCA9531 (650MHz) - Flash: 16 MiB (W25Q128FVSG) - RAM: 128 MiB DDR2 - Ethernet: 10/100: 1xLAN + 10/100: 1xWAN - Wireless: 2.4GHz (bgn) and 5GHz (ac) - USB: 1x USB 2.0 port - Button: 1x reset button - LED: 5x LEDS (green) Flash instruction: The original firmware is openwrt, so both LuCI or sysupgrade can be used. Signed-off-by: Luo chongjun --- diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 5b54c83674..47c900f6eb 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -33,6 +33,9 @@ etactica,eg200) ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33" ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore" ;; +glinet,x750) + ucidef_set_led_netdev "wan" "WAN" "gl-x750:green:wan" "eth0" + ;; netgear,wnr612-v2|\ on,n150r) ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index ef94388b15..fca9e42fb5 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -1,4 +1,4 @@ -#!/bin/sh +!/bin/sh . /lib/functions/system.sh . /lib/functions/uci-defaults.sh @@ -72,7 +72,8 @@ ath79_setup_interfaces() ucidef_set_interface_lan "eth0" "dhcp" ;; glinet,ar150|\ - glinet,ar300m) + glinet,ar300m|\ + glinet,x750) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; iodata,etg3-r|\ diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index dfe2d3ef31..b4bc20d1cf 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -87,6 +87,10 @@ board=$(board_name) case "$FIRMWARE" in "ath10k/cal-pci-0000:00:00.0.bin") case $board in + glinet,x750) + ath10kcal_extract "art" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) + ;; iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr2) ath10kcal_extract "art" 20480 2116 diff --git a/target/linux/ath79/dts/qca9533_glinet_x750.dts b/target/linux/ath79/dts/qca9533_glinet_x750.dts new file mode 100644 index 0000000000..7313f96d51 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_glinet_x750.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9533_glinet_x750.dtsi" + +&spi { + status = "okay"; + num-cs = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + art: partition@50000 { + label = "art"; + reg = <0x050000 0x010000>; + }; + + partition@60000 { + label = "firmware"; + reg = <0x060000 0xfa0000>; + }; + + }; + }; +}; diff --git a/target/linux/ath79/dts/qca9533_glinet_x750.dtsi b/target/linux/ath79/dts/qca9533_glinet_x750.dtsi new file mode 100644 index 0000000000..b84c332137 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_glinet_x750.dtsi @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9533.dtsi" + +/ { + compatible = "glinet,x750", "qca,qca9533"; + model = "GL.iNet GL-X750"; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + button0 { + label = "reset"; + linux,code = ; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "gl-x750:green:power"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan2g { + label = "gl-x750:green:wlan2g"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wlan5g { + label = "gl-x750:green:wlan5g"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wan { + label = "gl-x750:green:wan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + 4g { + label = "gl-x750:green:4g"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +ð0 { + status = "okay"; + mtd-mac-address = <&art 0x0>; + phy-handle = <&swphy4>; +}; + +ð1 { + mtd-mac-address = <&art 0x6>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x1002>; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 75e93998a9..3dbed22924 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -176,6 +176,14 @@ define Device/glinet_ar300m_nor endef TARGET_DEVICES += glinet_ar300m_nor +define Device/glinet_x750 + ATH_SOC := qca9533 + DEVICE_TITLE := GL.iNet GL-ARX750 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9887 + IMAGE_SIZE := 16000k +endef +TARGET_DEVICES += glinet_x750 + define Device/iodata_etg3-r ATH_SOC := ar9342 DEVICE_TITLE := I-O DATA ETG3-R