From: Jean-Jacques Hiblot Date: Mon, 24 Apr 2017 09:51:29 +0000 (+0200) Subject: drivers: phy: add PIPE3 phy driver X-Git-Tag: v2017.07-rc1~388^2~3 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=982082d9ce7365e2680639d3764ba0f09d82fa2a;p=oweals%2Fu-boot.git drivers: phy: add PIPE3 phy driver This phy is found on omap platforms with sata capabilities. Except for the part related to the DM and the PHY framework, the code is basically a copy paste from arch/arm/mach-omap2/pipe3-phy.c Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Tom Rini Reviewed-by: Simon Glass --- diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 75f459d78d..a91a6946b8 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -41,4 +41,22 @@ config PHY_SANDBOX This select a dummy sandbox PHY driver. It used only to implement the unit tests for the phy framework +config PIPE3_PHY + bool "Support omap's PIPE3 PHY" + depends on PHY && ARCH_OMAP2 + help + Support for the omap PIPE3 phy for sata + + This PHY is found on omap devices supporting SATA such as dra7, am57x + and omap5 + +config SPL_PIPE3_PHY + bool "Support omap's PIPE3 PHY in SPL" + depends on SPL_PHY && ARCH_OMAP2 + help + Support for the omap PIPE3 phy for sata in SPL + + This PHY is found on omap devices supporting SATA such as dra7, am57x + and omap5 + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index fd037c3460..6ce96d2ccc 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o +obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o diff --git a/drivers/phy/ti-pipe3-phy.c b/drivers/phy/ti-pipe3-phy.c new file mode 100644 index 0000000000..ed80f0ff0b --- /dev/null +++ b/drivers/phy/ti-pipe3-phy.c @@ -0,0 +1,373 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Written by Jean-Jacques Hiblot + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* PLLCTRL Registers */ +#define PLL_STATUS 0x00000004 +#define PLL_GO 0x00000008 +#define PLL_CONFIGURATION1 0x0000000C +#define PLL_CONFIGURATION2 0x00000010 +#define PLL_CONFIGURATION3 0x00000014 +#define PLL_CONFIGURATION4 0x00000020 + +#define PLL_REGM_MASK 0x001FFE00 +#define PLL_REGM_SHIFT 9 +#define PLL_REGM_F_MASK 0x0003FFFF +#define PLL_REGM_F_SHIFT 0 +#define PLL_REGN_MASK 0x000001FE +#define PLL_REGN_SHIFT 1 +#define PLL_SELFREQDCO_MASK 0x0000000E +#define PLL_SELFREQDCO_SHIFT 1 +#define PLL_SD_MASK 0x0003FC00 +#define PLL_SD_SHIFT 10 +#define SET_PLL_GO 0x1 +#define PLL_TICOPWDN BIT(16) +#define PLL_LDOPWDN BIT(15) +#define PLL_LOCK 0x2 +#define PLL_IDLE 0x1 + +/* Software rest for the SATA PLL (in CTRL_CORE_SMA_SW_0 register)*/ +#define SATA_PLL_SOFT_RESET (1<<18) + +/* PHY POWER CONTROL Register */ +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE + +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000 +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16 + +#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3 +#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0 + + +#define PLL_IDLE_TIME 100 /* in milliseconds */ +#define PLL_LOCK_TIME 100 /* in milliseconds */ + +struct omap_pipe3 { + void __iomem *pll_ctrl_base; + void __iomem *power_reg; + void __iomem *pll_reset_reg; + struct pipe3_dpll_map *dpll_map; +}; + + +struct pipe3_dpll_params { + u16 m; + u8 n; + u8 freq:3; + u8 sd; + u32 mf; +}; + +struct pipe3_dpll_map { + unsigned long rate; + struct pipe3_dpll_params params; +}; + +static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset) +{ + return readl(addr + offset); +} + +static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset, + u32 data) +{ + writel(data, addr + offset); +} + +static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3 + *pipe3) +{ + u32 rate; + struct pipe3_dpll_map *dpll_map = pipe3->dpll_map; + + rate = get_sys_clk_freq(); + + for (; dpll_map->rate; dpll_map++) { + if (rate == dpll_map->rate) + return &dpll_map->params; + } + + printf("%s: No DPLL configuration for %u Hz SYS CLK\n", + __func__, rate); + return NULL; +} + +static int omap_pipe3_wait_lock(struct omap_pipe3 *pipe3) +{ + u32 val; + int timeout = PLL_LOCK_TIME; + + do { + mdelay(1); + val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_STATUS); + if (val & PLL_LOCK) + break; + } while (--timeout); + + if (!(val & PLL_LOCK)) { + printf("%s: DPLL failed to lock\n", __func__); + return -EBUSY; + } + + return 0; +} + +static int omap_pipe3_dpll_program(struct omap_pipe3 *pipe3) +{ + u32 val; + struct pipe3_dpll_params *dpll_params; + + dpll_params = omap_pipe3_get_dpll_params(pipe3); + if (!dpll_params) { + printf("%s: Invalid DPLL parameters\n", __func__); + return -EINVAL; + } + + val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGN_MASK; + val |= dpll_params->n << PLL_REGN_SHIFT; + omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION2); + val &= ~PLL_SELFREQDCO_MASK; + val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT; + omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION2, val); + + val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGM_MASK; + val |= dpll_params->m << PLL_REGM_SHIFT; + omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION4); + val &= ~PLL_REGM_F_MASK; + val |= dpll_params->mf << PLL_REGM_F_SHIFT; + omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION4, val); + + val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION3); + val &= ~PLL_SD_MASK; + val |= dpll_params->sd << PLL_SD_SHIFT; + omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION3, val); + + omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_GO, SET_PLL_GO); + + return omap_pipe3_wait_lock(pipe3); +} + +static void omap_control_pipe3_power(struct omap_pipe3 *pipe3, int on) +{ + u32 val, rate; + + val = readl(pipe3->power_reg); + + rate = get_sys_clk_freq(); + rate = rate/1000000; + + if (on) { + val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK); + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + val |= rate << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; + } else { + val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + } + + writel(val, pipe3->power_reg); +} + +static int pipe3_init(struct phy *phy) +{ + int ret; + u32 val; + struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev); + + /* Program the DPLL only if not locked */ + val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_STATUS); + if (!(val & PLL_LOCK)) { + ret = omap_pipe3_dpll_program(pipe3); + if (ret) + return ret; + } else { + /* else just bring it out of IDLE mode */ + val = omap_pipe3_readl(pipe3->pll_ctrl_base, + PLL_CONFIGURATION2); + if (val & PLL_IDLE) { + val &= ~PLL_IDLE; + omap_pipe3_writel(pipe3->pll_ctrl_base, + PLL_CONFIGURATION2, val); + ret = omap_pipe3_wait_lock(pipe3); + if (ret) + return ret; + } + } + return 0; +} + +static int pipe3_power_on(struct phy *phy) +{ + struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev); + + /* Power up the PHY */ + omap_control_pipe3_power(pipe3, 1); + + return 0; +} + +static int pipe3_power_off(struct phy *phy) +{ + struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev); + + /* Power down the PHY */ + omap_control_pipe3_power(pipe3, 0); + + return 0; +} + +static int pipe3_exit(struct phy *phy) +{ + u32 val; + int timeout = PLL_IDLE_TIME; + struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev); + + pipe3_power_off(phy); + + /* Put DPLL in IDLE mode */ + val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION2); + val |= PLL_IDLE; + omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION2, val); + + /* wait for LDO and Oscillator to power down */ + do { + mdelay(1); + val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_STATUS); + if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN)) + break; + } while (--timeout); + + if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) { + error("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n", + __func__, val); + return -EBUSY; + } + + val = readl(pipe3->pll_reset_reg); + writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg); + mdelay(1); + writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg); + return 0; +} + +static void *get_reg(struct udevice *dev, const char *name) +{ + struct udevice *syscon; + struct regmap *regmap; + const fdt32_t *cell; + int len, err; + void *base; + + err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, + name, &syscon); + if (err) { + error("unable to find syscon device for %s (%d)\n", + name, err); + return NULL; + } + + regmap = syscon_get_regmap(syscon); + if (IS_ERR(regmap)) { + error("unable to find regmap for %s (%ld)\n", + name, PTR_ERR(regmap)); + return NULL; + } + + cell = fdt_getprop(gd->fdt_blob, dev->of_offset, name, + &len); + if (len < 2*sizeof(fdt32_t)) { + error("offset not available for %s\n", name); + return NULL; + } + + base = regmap_get_range(regmap, 0); + if (!base) + return NULL; + + return fdtdec_get_number(cell + 1, 1) + base; +} + +static int pipe3_phy_probe(struct udevice *dev) +{ + fdt_addr_t addr; + fdt_size_t sz; + struct omap_pipe3 *pipe3 = dev_get_priv(dev); + + addr = dev_get_addr_size_index(dev, 2, &sz); + if (addr == FDT_ADDR_T_NONE) { + error("missing pll ctrl address\n"); + return -EINVAL; + } + + pipe3->pll_ctrl_base = map_physmem(addr, sz, MAP_NOCACHE); + if (!pipe3->pll_ctrl_base) { + error("unable to remap pll ctrl\n"); + return -EINVAL; + } + + pipe3->power_reg = get_reg(dev, "syscon-phy-power"); + if (!pipe3->power_reg) + return -EINVAL; + + pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset"); + if (!pipe3->pll_reset_reg) + return -EINVAL; + + pipe3->dpll_map = (struct pipe3_dpll_map *)dev_get_driver_data(dev); + + return 0; +} + +static struct pipe3_dpll_map dpll_map_sata[] = { + {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ + {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ + {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ + {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ + {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ + {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ + { }, /* Terminator */ +}; + +static const struct udevice_id pipe3_phy_ids[] = { + { .compatible = "ti,phy-pipe3-sata", .data = (ulong)&dpll_map_sata }, + { } +}; + +static struct phy_ops pipe3_phy_ops = { + .init = pipe3_init, + .power_on = pipe3_power_on, + .power_off = pipe3_power_off, + .exit = pipe3_exit, +}; + +U_BOOT_DRIVER(pipe3_phy) = { + .name = "pipe3_phy", + .id = UCLASS_PHY, + .of_match = pipe3_phy_ids, + .ops = &pipe3_phy_ops, + .probe = pipe3_phy_probe, + .priv_auto_alloc_size = sizeof(struct omap_pipe3), +};