From: Sylvain Lemieux Date: Mon, 10 Aug 2015 12:16:31 +0000 (-0400) Subject: dma: lpc32xx: add DMA driver X-Git-Tag: v2015.10-rc3~142 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=980db8ca43066dc094517df01fe560ccac87ecfb;p=oweals%2Fu-boot.git dma: lpc32xx: add DMA driver Incorporate DMA driver from legacy LPCLinux NXP BSP. The files taken from the legacy patch are: - lpc32xx DMA driver - lpc3250 header file DMA registers definition. The legacy driver was updated and clean-up as part of the integration with the latest u-boot. Signed-off-by: Sylvain Lemieux Acked-by: Marek Vasut Tested-by: Vladimir Zapolskiy --- diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c index c0c9c6c312..f0af851b5e 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c +++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c @@ -41,6 +41,13 @@ void lpc32xx_uart_init(unsigned int uart_id) &clk->u3clk + (uart_id - 3)); } +void lpc32xx_dma_init(void) +{ + /* Enable DMA interface */ + writel(DMA_CLK_ENABLE, &clk->dmaclk_ctrl); + +} + void lpc32xx_mac_init(void) { /* Enable MAC interface */ diff --git a/arch/arm/include/asm/arch-lpc32xx/clk.h b/arch/arm/include/asm/arch-lpc32xx/clk.h index 010211a7e1..663f6bc777 100644 --- a/arch/arm/include/asm/arch-lpc32xx/clk.h +++ b/arch/arm/include/asm/arch-lpc32xx/clk.h @@ -158,6 +158,9 @@ struct clk_pm_regs { #define CLK_NAND_SLC_SELECT (1 << 2) #define CLK_NAND_MLC_INT (1 << 5) +/* DMA Clock Control Register bits */ +#define DMA_CLK_ENABLE (1 << 0) + /* SSP Clock Control Register bits */ #define CLK_SSP0_ENABLE_CLOCK (1 << 0) diff --git a/arch/arm/include/asm/arch-lpc32xx/dma.h b/arch/arm/include/asm/arch-lpc32xx/dma.h new file mode 100644 index 0000000000..b4569afc5f --- /dev/null +++ b/arch/arm/include/asm/arch-lpc32xx/dma.h @@ -0,0 +1,67 @@ +/* + * LPC32xx DMA Controller Interface + * + * Copyright (C) 2008 by NXP Semiconductors + * @Author: Kevin Wells + * @Descr: Definitions for LPC3250 chip + * @References: NXP LPC3250 User's Guide + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _LPC32XX_DMA_H +#define _LPC32XX_DMA_H + +#include + +/* + * DMA linked list structure used with a channel's LLI register; + * refer to UM10326, "LPC32x0 and LPC32x0/01 User manual" - Rev. 3 + * tables 84, 85, 86 & 87 for details. + */ +struct lpc32xx_dmac_ll { + u32 dma_src; + u32 dma_dest; + u32 next_lli; + u32 next_ctrl; +}; + +/* control register definitions */ +#define DMAC_CHAN_INT_TC_EN (1 << 31) /* channel terminal count interrupt */ +#define DMAC_CHAN_DEST_AUTOINC (1 << 27) /* automatic destination increment */ +#define DMAC_CHAN_SRC_AUTOINC (1 << 26) /* automatic source increment */ +#define DMAC_CHAN_DEST_AHB1 (1 << 25) /* AHB1 master for dest. transfer */ +#define DMAC_CHAN_DEST_WIDTH_32 (1 << 22) /* Destination data width selection */ +#define DMAC_CHAN_SRC_WIDTH_32 (1 << 19) /* Source data width selection */ +#define DMAC_CHAN_DEST_BURST_1 0 +#define DMAC_CHAN_DEST_BURST_4 (1 << 15) /* Destination data burst size */ +#define DMAC_CHAN_SRC_BURST_1 0 +#define DMAC_CHAN_SRC_BURST_4 (1 << 12) /* Source data burst size */ + +/* + * config_ch register definitions + * DMAC_CHAN_FLOW_D_xxx: flow control with DMA as the controller + * DMAC_DEST_PERIP: Macro for loading destination peripheral + * DMAC_SRC_PERIP: Macro for loading source peripheral + */ +#define DMAC_CHAN_FLOW_D_M2P (0x1 << 11) +#define DMAC_CHAN_FLOW_D_P2M (0x2 << 11) +#define DMAC_DEST_PERIP(n) (((n) & 0x1F) << 6) +#define DMAC_SRC_PERIP(n) (((n) & 0x1F) << 1) + +/* + * config_ch register definitions + * (source and destination peripheral ID numbers). + * These can be used with the DMAC_DEST_PERIP and DMAC_SRC_PERIP macros. + */ +#define DMA_PERID_NAND1 1 + +/* Channel enable bit */ +#define DMAC_CHAN_ENABLE (1 << 0) + +int lpc32xx_dma_get_channel(void); +int lpc32xx_dma_start_xfer(unsigned int channel, + const struct lpc32xx_dmac_ll *desc, u32 config); +int lpc32xx_dma_wait_status(unsigned int channel); + +#endif /* _LPC32XX_DMA_H */ diff --git a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h index 0845f83e86..d6e5e683e8 100644 --- a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h +++ b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h @@ -10,6 +10,7 @@ #include void lpc32xx_uart_init(unsigned int uart_id); +void lpc32xx_dma_init(void); void lpc32xx_mac_init(void); void lpc32xx_mlc_nand_init(void); void lpc32xx_slc_nand_init(void); diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 4c8fcc2575..f95fe70a99 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_APBH_DMA) += apbh_dma.o obj-$(CONFIG_FSL_DMA) += fsl_dma.o obj-$(CONFIG_TI_KSNAV) += keystone_nav.o keystone_nav_cfg.o obj-$(CONFIG_TI_EDMA3) += ti-edma3.o +obj-$(CONFIG_DMA_LPC32XX) += lpc32xx_dma.o diff --git a/drivers/dma/lpc32xx_dma.c b/drivers/dma/lpc32xx_dma.c new file mode 100644 index 0000000000..955adfeccd --- /dev/null +++ b/drivers/dma/lpc32xx_dma.c @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2008 by NXP Semiconductors + * @Author: Kevin Wells + * @Descr: LPC3250 DMA controller interface support functions + * + * Copyright (c) 2015 Tyco Fire Protection Products. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +/* DMA controller channel register structure */ +struct dmac_chan_reg { + u32 src_addr; + u32 dest_addr; + u32 lli; + u32 control; + u32 config_ch; + u32 reserved[3]; +}; + +/* DMA controller register structures */ +struct dma_reg { + u32 int_stat; + u32 int_tc_stat; + u32 int_tc_clear; + u32 int_err_stat; + u32 int_err_clear; + u32 raw_tc_stat; + u32 raw_err_stat; + u32 chan_enable; + u32 sw_burst_req; + u32 sw_single_req; + u32 sw_last_burst_req; + u32 sw_last_single_req; + u32 config; + u32 sync; + u32 reserved[50]; + struct dmac_chan_reg dma_chan[8]; +}; + +#define DMA_NO_OF_CHANNELS 8 + +/* config register definitions */ +#define DMAC_CTRL_ENABLE (1 << 0) /* For enabling the DMA controller */ + +static u32 alloc_ch; + +static struct dma_reg *dma = (struct dma_reg *)DMA_BASE; + +int lpc32xx_dma_get_channel(void) +{ + int i; + + if (!alloc_ch) { /* First time caller */ + /* + * DMA clock are enable by "lpc32xx_dma_init()" and should + * be call by board "board_early_init_f()" function. + */ + + /* + * Make sure DMA controller and all channels are disabled. + * Controller is in little-endian mode. Disable sync signals. + */ + writel(0, &dma->config); + writel(0, &dma->sync); + + /* Clear interrupt and error statuses */ + writel(0xFF, &dma->int_tc_clear); + writel(0xFF, &dma->raw_tc_stat); + writel(0xFF, &dma->int_err_clear); + writel(0xFF, &dma->raw_err_stat); + + /* Enable DMA controller */ + writel(DMAC_CTRL_ENABLE, &dma->config); + } + + i = ffz(alloc_ch); + + /* Check if all the available channels are busy */ + if (unlikely(i == DMA_NO_OF_CHANNELS)) + return -1; + alloc_ch |= BIT_MASK(i); + return i; +} + +int lpc32xx_dma_start_xfer(unsigned int channel, + const struct lpc32xx_dmac_ll *desc, u32 config) +{ + if (unlikely(((BIT_MASK(channel) & alloc_ch) == 0) || + (channel >= DMA_NO_OF_CHANNELS))) { + error("Request for xfer on unallocated channel %d", channel); + return -1; + } + writel(BIT_MASK(channel), &dma->int_tc_clear); + writel(BIT_MASK(channel), &dma->int_err_clear); + writel(desc->dma_src, &dma->dma_chan[channel].src_addr); + writel(desc->dma_dest, &dma->dma_chan[channel].dest_addr); + writel(desc->next_lli, &dma->dma_chan[channel].lli); + writel(desc->next_ctrl, &dma->dma_chan[channel].control); + writel(config, &dma->dma_chan[channel].config_ch); + + return 0; +} + +int lpc32xx_dma_wait_status(unsigned int channel) +{ + unsigned long start; + u32 reg; + + /* Check if given channel is valid */ + if (unlikely(channel >= DMA_NO_OF_CHANNELS)) { + error("Request for status on unallocated channel %d", channel); + return -1; + } + + start = get_timer(0); + while (1) { + reg = readl(&dma->raw_tc_stat); + reg |= readl(dma->raw_err_stat); + if (reg & BIT_MASK(channel)) + break; + + if (get_timer(start) > CONFIG_SYS_HZ) { + error("DMA status timeout channel %d\n", channel); + return -ETIMEDOUT; + } + udelay(1); + } + + if (unlikely(readl(&dma->raw_err_stat) & BIT_MASK(channel))) { + setbits_le32(&dma->int_err_clear, BIT_MASK(channel)); + setbits_le32(&dma->raw_err_stat, BIT_MASK(channel)); + error("DMA error on channel %d\n", channel); + return -1; + } + setbits_le32(&dma->int_tc_clear, BIT_MASK(channel)); + setbits_le32(&dma->raw_tc_stat, BIT_MASK(channel)); + return 0; +}