From: Simon Glass Date: Thu, 14 Feb 2013 17:38:30 +0000 (+0000) Subject: x86: Remove unused real mode code X-Git-Tag: v2013.04-rc1~41 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=96dfc0633aabb4f8fb720d39d9deb29dde08749b;p=oweals%2Fu-boot.git x86: Remove unused real mode code This code is pretty old and we want to support only 32-bit systems now. Signed-off-by: Simon Glass Acked-by: Graeme Russ --- diff --git a/README b/README index 6106e0d2aa..d8cb3940d4 100644 --- a/README +++ b/README @@ -3820,11 +3820,6 @@ Low Level (hardware related) configuration options: If defined, the x86 reset vector code is included. This is not needed when U-Boot is running from Coreboot. -- CONFIG_X86_NO_REAL_MODE - If defined, x86 real mode code is omitted. This assumes a - 32-bit environment where such code is not needed. You will - need to do this when U-Boot is running from Coreboot. - Freescale QE/FMAN Firmware Support: ----------------------------------- diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h deleted file mode 100644 index 0f12a893b4..0000000000 --- a/arch/x86/include/asm/realmode.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __ASM_REALMODE_H_ -#define __ASM_REALMODE_H_ -#include - -extern ulong __realmode_start; -extern ulong __realmode_size; -extern char realmode_enter; - -int bios_setup(void); -int enter_realmode(u16 seg, u16 off, struct pt_regs *in, struct pt_regs *out); -int enter_realmode_int(u8 lvl, struct pt_regs *in, struct pt_regs *out); - -#endif diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 0a52cc896c..9b24dc5fdf 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -25,16 +25,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(ARCH).o -ifeq ($(CONFIG_X86_NO_REAL_MODE),) -SOBJS-$(CONFIG_SYS_PC_BIOS) += bios.o -SOBJS-$(CONFIG_SYS_PCI_BIOS) += bios_pci.o -COBJS-y += realmode.o -SOBJS-y += realmode_switch.o - -COBJS-$(CONFIG_SYS_PC_BIOS) += bios_setup.o -COBJS-$(CONFIG_VIDEO_VGA) += video_bios.o -endif - COBJS-y += board.o COBJS-y += bootm.o COBJS-y += cmd_boot.o diff --git a/arch/x86/lib/bios.S b/arch/x86/lib/bios.S deleted file mode 100644 index 239aaa9cfa..0000000000 --- a/arch/x86/lib/bios.S +++ /dev/null @@ -1,569 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Based on msbios.c from rolo 1.6: - *---------------------------------------------------------------------- - * (C) Copyright 2000 - * Sysgo Real-Time Solutions GmbH - * Klein-Winternheim, Germany - *---------------------------------------------------------------------- - */ - -#include "bios.h" - -/* - * During it's initialization phase, before switching to protected - * mode, the Linux Kernel makes a few BIOS calls. This won't work - * if the board does not have a BIOS. - * - * This is a very minimalisic BIOS that supplies just enough - * functionality to keep the Linux Kernel happy. It is NOT - * a general purpose replacement for a real BIOS !! - */ - -.section .bios, "ax" -.code16 -.org 0 - /* a call to f000:0 should warmboot */ - jmp realmode_reset - -.globl rm_int00 -.hidden rm_int00 -.type rm_int00, @function -rm_int00: - pushw $0 - jmp any_interrupt16 -.globl rm_int01 -.hidden rm_int01 -.type rm_int01, @function -rm_int01: - pushw $1 - jmp any_interrupt16 -.globl rm_int02 -.hidden rm_int02 -.type rm_int02, @function -rm_int02: - pushw $2 - jmp any_interrupt16 -.globl rm_int03 -.hidden rm_int03 -.type rm_int03, @function -rm_int03: - pushw $3 - jmp any_interrupt16 -.globl rm_int04 -.hidden rm_int04 -.type rm_int04, @function -rm_int04: - pushw $4 - jmp any_interrupt16 -.globl rm_int05 -.hidden rm_int05 -.type rm_int05, @function -rm_int05: - pushw $5 - jmp any_interrupt16 -.globl rm_int06 -.hidden rm_int06 -.type rm_int06, @function -rm_int06: - pushw $6 - jmp any_interrupt16 -.globl rm_int07 -.hidden rm_int07 -.type rm_int07, @function -rm_int07: - pushw $7 - jmp any_interrupt16 -.globl rm_int08 -.hidden rm_int08 -.type rm_int08, @function -rm_int08: - pushw $8 - jmp any_interrupt16 -.globl rm_int09 -.hidden rm_int09 -.type rm_int09, @function -rm_int09: - pushw $9 - jmp any_interrupt16 -.globl rm_int0a -.hidden rm_int0a -.type rm_int0a, @function -rm_int0a: - pushw $10 - jmp any_interrupt16 -.globl rm_int0b -.hidden rm_int0b -.type rm_int0b, @function -rm_int0b: - pushw $11 - jmp any_interrupt16 -.globl rm_int0c -.hidden rm_int0c -.type rm_int0c, @function -rm_int0c: - pushw $12 - jmp any_interrupt16 -.globl rm_int0d -.hidden rm_int0d -.type rm_int0d, @function -rm_int0d: - pushw $13 - jmp any_interrupt16 -.globl rm_int0e -.hidden rm_int0e -.type rm_int0e, @function -rm_int0e: - pushw $14 - jmp any_interrupt16 -.globl rm_int0f -.hidden rm_int0f -.type rm_int0f, @function -rm_int0f: - pushw $15 - jmp any_interrupt16 -.globl rm_int10 -.hidden rm_int10 -.type rm_int10, @function -rm_int10: - pushw $16 - jmp any_interrupt16 -.globl rm_int11 -.hidden rm_int11 -.type rm_int11, @function -rm_int11: - pushw $17 - jmp any_interrupt16 -.globl rm_int12 -.hidden rm_int12 -.type rm_int12, @function -rm_int12: - pushw $18 - jmp any_interrupt16 -.globl rm_int13 -.hidden rm_int13 -.type rm_int13, @function -rm_int13: - pushw $19 - jmp any_interrupt16 -.globl rm_int14 -.hidden rm_int14 -.type rm_int14, @function -rm_int14: - pushw $20 - jmp any_interrupt16 -.globl rm_int15 -.hidden rm_int15 -.type rm_int15, @function -rm_int15: - pushw $21 - jmp any_interrupt16 -.globl rm_int16 -.hidden rm_int16 -.type rm_int16, @function -rm_int16: - pushw $22 - jmp any_interrupt16 -.globl rm_int17 -.hidden rm_int17 -.type rm_int17, @function -rm_int17: - pushw $23 - jmp any_interrupt16 -.globl rm_int18 -.hidden rm_int18 -.type rm_int18, @function -rm_int18: - pushw $24 - jmp any_interrupt16 -.globl rm_int19 -.hidden rm_int19 -.type rm_int19, @function -rm_int19: - pushw $25 - jmp any_interrupt16 -.globl rm_int1a -.hidden rm_int1a -.type rm_int1a, @function -rm_int1a: - pushw $26 - jmp any_interrupt16 -.globl rm_int1b -.hidden rm_int1b -.type rm_int1b, @function -rm_int1b: - pushw $27 - jmp any_interrupt16 -.globl rm_int1c -.hidden rm_int1c -.type rm_int1c, @function -rm_int1c: - pushw $28 - jmp any_interrupt16 -.globl rm_int1d -.hidden rm_int1d -.type rm_int1d, @function -rm_int1d: - pushw $29 - jmp any_interrupt16 -.globl rm_int1e -.hidden rm_int1e -.type rm_int1e, @function -rm_int1e: - pushw $30 - jmp any_interrupt16 -.globl rm_int1f -.hidden rm_int1f -.type rm_int1f, @function -rm_int1f: - pushw $31 - jmp any_interrupt16 -.globl rm_def_int -.hidden rm_def_int -.type rm_def_int, @function -rm_def_int: - iret - - /* - * All interrupt jumptable entries jump to here after pushing the - * interrupt vector number onto the stack. - */ -any_interrupt16: - MAKE_BIOS_STACK - -gs movw OFFS_VECTOR(%bp), %ax - cmpw $0x10, %ax - je Lint_10h - cmpw $0x11, %ax - je Lint_11h - cmpw $0x12, %ax - je Lint_12h - cmpw $0x13, %ax - je Lint_13h - cmpw $0x15, %ax - je Lint_15h - cmpw $0x16, %ax - je Lint_16h - cmpw $0x1a, %ax - je Lint_1ah - movw $0xffff, %ax - jmp Lout -Lint_10h: - /* VGA BIOS services */ - call bios_10h - jmp Lout -Lint_11h: - call bios_11h - jmp Lout -Lint_12h: - call bios_12h - jmp Lout -Lint_13h: - /* BIOS disk services */ - call bios_13h - jmp Lout -Lint_15h: - /* Misc. BIOS services */ - call bios_15h - jmp Lout -Lint_16h: - /* keyboard services */ - call bios_16h - jmp Lout -Lint_1ah: - /* PCI bios */ - call bios_1ah - jmp Lout -Lout: - cmpw $0, %ax - je Lhandeled - - /* - * Insert code for unhandeled INTs here. - * - * ROLO prints a message to the console we could do that but then - * we're in 16bit mode so we'll have to get back into 32bit mode - * to use the console I/O routines (if we do this we should make - * int 0x10 and int 0x16 work as well) - */ -Lhandeled: - RESTORE_CALLERS_STACK - - /* dump vector number */ - addw $2,%sp - - /* return from interrupt */ - iret - -/* - ************************************************************ - * BIOS interrupt 10h -- VGA services - ************************************************************ - */ -bios_10h: -gs movw OFFS_AX(%bp), %ax - shrw $8, %ax - cmpw $0x3, %ax - je Lcur_pos - cmpw $0xf, %ax - je Lvid_state - cmpw $0x12, %ax - je Lvid_cfg - movw $0xffff, %ax - ret -Lcur_pos: - /* Read Cursor Position and Size */ -gs movw $0, OFFS_CX(%bp) -gs movw $0, OFFS_DX(%bp) - xorw %ax, %ax - ret -Lvid_state: - /* Get Video State - 80 columns, 80x25, 16 colors */ -gs movw $(80 << 8|0x03), OFFS_AX(%bp) -gs movw $0, OFFS_BX(%bp) - xorw %ax, %ax - ret -Lvid_cfg: - /* Video Subsystem Configuration (EGA/VGA) - indicate CGA/MDA/HGA */ -gs movw $0x10, OFFS_BX(%bp) - xorw %ax, %ax - ret - -/* - ************************************************************ - * BIOS interrupt 11h -- Equipment determination - ************************************************************ - */ - -bios_11h: -cs movw bios_equipment, %ax -gs movw %ax, OFFS_AX(%bp) - xorw %ax, %ax - ret - -/* - ************************************************************ - * BIOS interrupt 12h -- Get Memory Size - ************************************************************ - */ -bios_12h: -cs movw ram_in_64kb_chunks, %ax - cmpw $0xa, %ax - ja b12_more_than_640k - shlw $6, %ax - jmp b12_return -b12_more_than_640k: - movw $0x280, %ax -b12_return: - /* return number of kilobytes in ax */ -gs movw %ax, OFFS_AX(%bp) - -gs movw OFFS_FLAGS(%bp), %ax - - /* clear carry -- function succeeded */ - andw $0xfffe, %ax -gs movw %ax, OFFS_FLAGS(%bp) - - xorw %ax, %ax - ret - -/* - ************************************************************ - * BIOS interrupt 13h -- Disk services - ************************************************************ - */ -bios_13h: -gs movw OFFS_AX(%bp), %ax - shrw $8, %ax - cmpw $0x15, %ax - je Lfunc_15h - movw $0xffff, %ax - ret -Lfunc_15h: -gs movw OFFS_AX(%bp), %ax - - /* return AH=0->drive not present */ - andw $0x00ff, %ax -gs movw %ax, OFFS_AX(%bp) - xorw %ax, %ax - ret - -/* - *********************************************************** - * BIOS interrupt 15h -- Miscellaneous services - *********************************************************** - */ -bios_15h: -gs movw OFFS_AX(%bp), %ax - shrw $8, %ax - cmpw $0xc0, %ax - je Lfunc_c0h - cmpw $0xe8, %ax - je Lfunc_e8h - cmpw $0x88, %ax - je Lfunc_88h - movw $0xffff, %ax - ret - -Lfunc_c0h: - /* Return System Configuration Parameters (PS2 only) */ -gs movw OFFS_FLAGS(%bp), %ax - - /* return carry -- function not supported */ - orw $1, %ax -gs movw %ax, OFFS_FLAGS(%bp) - xorw %ax, %ax - ret - -Lfunc_e8h: -gs movw OFFS_AX(%bp), %ax - andw $0xff, %ax - cmpw $1, %ax - je Lfunc_e801h -gs movw OFFS_FLAGS(%bp), %ax - - /* return carry -- function not supported */ - orw $1, %ax -gs movw %ax, OFFS_FLAGS(%bp) - xorw %ax, %ax - ret - -Lfunc_e801h: - /* Get memory size for >64M Configurations */ -cs movw ram_in_64kb_chunks, %ax - cmpw $0x100, %ax - ja e801_more_than_16mb - - /* multiply by 64 */ - shlw $6, %ax - - /* 1st meg does not count */ - subw $0x400, %ax - - /* return memory size between 1M and 16M in 1kb chunks in AX and CX */ -gs movw %ax, OFFS_AX(%bp) -gs movw %ax, OFFS_CX(%bp) - - /* set BX and DX to 0*/ -gs movw $0, OFFS_BX(%bp) -gs movw $0, OFFS_DX(%bp) -gs movw OFFS_FLAGS(%bp), %ax - - /* clear carry -- function succeeded */ - andw $0xfffe, %ax -gs movw %ax, OFFS_FLAGS(%bp) - xorw %ax, %ax - ret - -e801_more_than_16mb: - /* subtract 16MB */ - subw $0x100, %ax - - /* return 0x3c00 (16MB-1MB) in AX and CX */ -gs movw $0x3c00, OFFS_AX(%bp) -gs movw $0x3c00, OFFS_CX(%bp) - - /* set BX and DX to number of 64kb chunks above 16MB */ -gs movw %ax, OFFS_BX(%bp) -gs movw %ax, OFFS_DX(%bp) - -gs movw OFFS_FLAGS(%bp), %ax - - /* clear carry -- function succeeded */ - andw $0xfffe, %ax -gs movw %ax, OFFS_FLAGS(%bp) - xorw %ax, %ax - ret - -Lfunc_88h: -cs movw ram_in_64kb_chunks, %ax - cmpw $0x100, %ax - jna b88_not_more_than16 - movw $0x100, %ax -b88_not_more_than16: - shlw $6, %ax - - /* 1st meg does not count */ - subw $0x400, %ax - - /* return number of kilobytes between 16MB and 16MB in ax */ -gs movw %ax, OFFS_AX(%bp) - -gs movw OFFS_FLAGS(%bp), %ax - - /* clear carry -- function succeeded */ - andw $0xfffe, %ax -gs movw %ax, OFFS_FLAGS(%bp) - - xorw %ax, %ax - ret - -/* - ************************************************************ - * BIOS interrupt 16h -- keyboard services - ************************************************************ - */ -bios_16h: -gs movw OFFS_AX(%bp), %ax - shrw $8, %ax - cmpw $0x03, %ax - je Lfunc_03h - movw $0xffff, %ax - ret -Lfunc_03h: - /* do nothing -- function not supported */ - xorw %ax, %ax - ret - -/* - ************************************************************ - * BIOS interrupt 1ah -- PCI bios - ************************************************************ - */ -bios_1ah: -gs movw OFFS_AX(%bp), %ax - cmpb $0xb1, %ah - je Lfunc_b1h - movw $0xffff, %ax - ret -Lfunc_b1h: - call realmode_pci_bios - - /* do nothing -- function not supported */ - xorw %ax, %ax - ret - - -.globl ram_in_64kb_chunks -.hidden ram_in_64kb_chunks -.type ram_in_64kb_chunks, @function -ram_in_64kb_chunks: - .word 0 - -.globl bios_equipment -.hidden bios_equipment -.type bios_equipment, @function -bios_equipment: - .word 0 diff --git a/arch/x86/lib/bios.h b/arch/x86/lib/bios.h index a220983df1..96509b066e 100644 --- a/arch/x86/lib/bios.h +++ b/arch/x86/lib/bios.h @@ -145,9 +145,6 @@ extern void *rm_int1e; extern void *rm_int1f; extern void *rm_def_int; -extern void *realmode_reset; -extern void *realmode_pci_bios_call_entry; - #define RELOC_16_LONG(seg, off) (*(u32 *)(seg << 4 | (u32)&off)) #define RELOC_16_WORD(seg, off) (*(u16 *)(seg << 4 | (u32)&off)) #define RELOC_16_BYTE(seg, off) (*(u8 *)(seg << 4 | (u32)&off)) diff --git a/arch/x86/lib/bios_pci.S b/arch/x86/lib/bios_pci.S deleted file mode 100644 index 47c478b27d..0000000000 --- a/arch/x86/lib/bios_pci.S +++ /dev/null @@ -1,447 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * x86 realmode assembly implementation of a PCI BIOS - * for platforms that use one PCI hose and configuration - * access type 1. (The common case for low-end PC's) - */ - -#include "bios.h" - -#define PCI_BIOS_DEBUG - -.section .bios, "ax" -.code16 -.globl realmode_pci_bios_call_entry -.hidden realmode_pci_bios_call_entry -.type realmode_pci_bios_call_entry, @function -realmode_pci_bios_call_entry: - MAKE_BIOS_STACK - call realmode_pci_bios - RESTORE_CALLERS_STACK - ret - - -.globl realmode_pci_bios -realmode_pci_bios: -gs movw OFFS_AX(%bp), %ax - cmpb $1, %al - je pci_bios_present - cmpb $2, %al - je pci_bios_find_device - cmpb $3, %al - je pci_bios_find_class - cmpb $6, %al - je pci_bios_generate_special_cycle - cmpb $8, %al - je pci_bios_read_cfg_byte - cmpb $9, %al - je pci_bios_read_cfg_word - cmpb $10, %al - je pci_bios_read_cfg_dword - cmpb $11, %al - je pci_bios_write_cfg_byte - cmpb $12, %al - je pci_bios_write_cfg_word - cmpb $13, %al - je pci_bios_write_cfg_dword - cmpb $14, %al - je pci_bios_get_irq_routing - cmpb $15, %al - je pci_bios_set_irq - jmp unknown_function - -/*****************************************************************************/ - -pci_bios_present: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_present -#endif - movl $0x20494350, %eax -gs movl %eax, OFFS_EDX(%bp) - - /* We support cfg type 1 version 2.10 */ - movb $0x01, %al -gs movb %al, OFFS_AL(%bp) - movw $0x0210, %ax -gs movw %ax, OFFS_BX(%bp) - - /* last bus number */ -cs movb pci_last_bus, %al -gs movb %al, OFFS_CL(%bp) - jmp clear_carry - -/*****************************************************************************/ - -/* device 0-31, function 0-7 */ -pci_bios_find_device: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_find_device -#endif -gs movw OFFS_CX(%bp), %di - shll $16, %edi -gs movw OFFS_DX(%bp), %di - /* edi now holds device in upper 16 bits and vendor in lower 16 bits */ - -gs movw OFFS_SI(%bp), %si - - /* start at bus 0 dev 0 function 0 */ - xorw %bx, %bx -pfd_loop: - /* dword 0 is vendor/device */ - xorw %ax, %ax - call __pci_bios_select_register - movw $0xcfc, %dx - inl %dx, %eax - - /* our device ? */ - cmpl %edi, %eax - je pfd_found_one -pfd_next_dev: - /* check for multi function devices */ - movw %bx, %ax - andw $3, %ax - jnz pfd_function_not_zero - movw $0x000c, %ax - call __pci_bios_select_register - movw $0xcfe, %dx - inb %dx, %al - andb $0x80, %al - jz pfd_not_multi_function -pfd_function_not_zero: - /* next function, overflows in to device number, then bus number */ - incw %bx - jmp pfd_check_bus - -pfd_not_multi_function: - /* remove function bits */ - andw $0xfff8, %bx - - /* next device, overflows in to bus number */ - addw $0x0008, %bx -pfd_check_bus: -cs movb pci_last_bus, %ah - cmpb %ah, %bh - ja pfd_not_found - jmp pfd_loop -pfd_found_one: - decw %si - js pfd_done - jmp pfd_next_dev - -pfd_done: -gs movw %bx, OFFS_BX(%bp) - jmp clear_carry - -pfd_not_found: - /* device not found */ - movb $0x86, %ah - jmp set_carry - -/*****************************************************************************/ - -pci_bios_find_class: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_find_class -#endif -gs movl OFFS_ECX(%bp), %edi - - /* edi now holds class-code in lower 24 bits */ - andl $0x00ffffff, %edi -gs movw OFFS_SI(%bp), %si - - /* start at bus 0 dev 0 function 0 */ - xorw %bx, %bx -pfc_loop: - /* dword 8 is class-code high 24bits */ - movw $8, %ax - call __pci_bios_select_register - movw $0xcfc, %dx - inl %dx, %eax - shrl $8, %eax - andl $0x00ffffff, %eax - - /* our device ? */ - cmpl %edi, %eax - je pfc_found_one -pfc_next_dev: - /* check for multi function devices */ - andw $3, %bx - jnz pfc_function_not_zero - movw $0x000c, %ax - call __pci_bios_select_register - movw $0xcfe, %dx - inb %dx, %al - andb $0x80, %al - jz pfc_not_multi_function -pfc_function_not_zero: - /* next function, overflows in to device number, then bus number */ - incw %bx - jmp pfc_check_bus - -pfc_not_multi_function: - /* remove function bits */ - andw $0xfff8, %bx - - /* next device, overflows in to bus number */ - addw $0x0008, %bx -pfc_check_bus: -cs movb pci_last_bus, %ah - cmpb %ah, %bh - ja pfc_not_found - jmp pfc_loop -pfc_found_one: - decw %si - js pfc_done - jmp pfc_next_dev - -pfc_done: -gs movw %bx, OFFS_BX(%bp) - jmp clear_carry - -pfc_not_found: - /* device not found */ - movb $0x86, %ah - jmp set_carry - -/*****************************************************************************/ - -pci_bios_generate_special_cycle: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_generate_special_cycle -#endif - /* function not supported */ - movb $0x81, %ah - jmp set_carry - -/*****************************************************************************/ - -pci_bios_read_cfg_byte: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_read_cfg_byte -#endif - call pci_bios_select_register -gs movw OFFS_DI(%bp), %dx - andw $3, %dx - addw $0xcfc, %dx - inb %dx, %al -gs movb %al, OFFS_CL(%bp) - jmp clear_carry - -/*****************************************************************************/ - -pci_bios_read_cfg_word: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_read_cfg_word -#endif - call pci_bios_select_register -gs movw OFFS_DI(%bp), %dx - andw $2, %dx - addw $0xcfc, %dx - inw %dx, %ax -gs movw %ax, OFFS_CX(%bp) - jmp clear_carry - - -/*****************************************************************************/ - -pci_bios_read_cfg_dword: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_read_cfg_dword -#endif - call pci_bios_select_register - movw $0xcfc, %dx - inl %dx, %eax -gs movl %eax, OFFS_ECX(%bp) - jmp clear_carry - -/*****************************************************************************/ - -pci_bios_write_cfg_byte: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_write_cfg_byte -#endif - call pci_bios_select_register -gs movw OFFS_DI(%bp), %dx -gs movb OFFS_CL(%bp), %al - andw $3, %dx - addw $0xcfc, %dx - outb %al, %dx - jmp clear_carry - -/*****************************************************************************/ - -pci_bios_write_cfg_word: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_write_cfg_word -#endif - call pci_bios_select_register -gs movw OFFS_DI(%bp), %dx -gs movw OFFS_CX(%bp), %ax - andw $2, %dx - addw $0xcfc, %dx - outw %ax, %dx - jmp clear_carry - -/*****************************************************************************/ - -pci_bios_write_cfg_dword: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_write_cfg_dword -#endif - call pci_bios_select_register -gs movl OFFS_ECX(%bp), %eax - movw $0xcfc, %dx - outl %eax, %dx - jmp clear_carry - -/*****************************************************************************/ - -pci_bios_get_irq_routing: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_get_irq_routing -#endif - /* function not supported */ - movb $0x81, %ah - jmp set_carry - -/*****************************************************************************/ - -pci_bios_set_irq: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_set_irq -#endif - /* function not supported */ - movb $0x81, %ah - jmp set_carry - -/*****************************************************************************/ - -unknown_function: -#ifdef PCI_BIOS_DEBUG -cs incl num_pci_bios_unknown_function -#endif - /* function not supported */ - movb $0x81, %ah - jmp set_carry - -/*****************************************************************************/ - -pci_bios_select_register: -gs movw OFFS_BX(%bp), %bx -gs movw OFFS_DI(%bp), %ax -/* destroys eax, dx */ -__pci_bios_select_register: - /* BX holds device id, AX holds register index */ - pushl %ebx - andl $0xfc, %eax - andl $0xffff, %ebx - shll $8, %ebx - orl %ebx, %eax - orl $0x80000000, %eax - movw $0xcf8, %dx - outl %eax, %dx - popl %ebx - ret - - -clear_carry: -gs movw OFFS_FLAGS(%bp), %ax - - /* clear carry -- function succeeded */ - andw $0xfffe, %ax -gs movw %ax, OFFS_FLAGS(%bp) - xorw %ax, %ax -gs movb %ah, OFFS_AH(%bp) - ret - -set_carry: -gs movb %ah, OFFS_AH(%bp) -gs movw OFFS_FLAGS(%bp), %ax - - /* return carry -- function not supported */ - orw $1, %ax -gs movw %ax, OFFS_FLAGS(%bp) - movw $-1, %ax - ret - -/*****************************************************************************/ - -.globl pci_last_bus -pci_last_bus: - .byte 0 - -#ifdef PCI_BIOS_DEBUG -.globl num_pci_bios_present -num_pci_bios_present: - .long 0 - -.globl num_pci_bios_find_device -num_pci_bios_find_device: - .long 0 - -.globl num_pci_bios_find_class -num_pci_bios_find_class: - .long 0 - -.globl num_pci_bios_generate_special_cycle -num_pci_bios_generate_special_cycle: - .long 0 - -.globl num_pci_bios_read_cfg_byte -num_pci_bios_read_cfg_byte: - .long 0 - -.globl num_pci_bios_read_cfg_word -num_pci_bios_read_cfg_word: - .long 0 - -.globl num_pci_bios_read_cfg_dword -num_pci_bios_read_cfg_dword: - .long 0 - -.globl num_pci_bios_write_cfg_byte -num_pci_bios_write_cfg_byte: - .long 0 - -.globl num_pci_bios_write_cfg_word -num_pci_bios_write_cfg_word: - .long 0 - -.globl num_pci_bios_write_cfg_dword -num_pci_bios_write_cfg_dword: - .long 0 - -.globl num_pci_bios_get_irq_routing -num_pci_bios_get_irq_routing: - .long 0 - -.globl num_pci_bios_set_irq -num_pci_bios_set_irq: - .long 0 - -.globl num_pci_bios_unknown_function -num_pci_bios_unknown_function: - .long 0 -#endif diff --git a/arch/x86/lib/bios_setup.c b/arch/x86/lib/bios_setup.c deleted file mode 100644 index 265f7d671e..0000000000 --- a/arch/x86/lib/bios_setup.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Partly based on msbios.c from rolo 1.6: - *---------------------------------------------------------------------- - * (C) Copyright 2000 - * Sysgo Real-Time Solutions GmbH - * Klein-Winternheim, Germany - *---------------------------------------------------------------------- - */ - -#include -#include -#include -#include -#include "bios.h" - -DECLARE_GLOBAL_DATA_PTR; - -#define NUMVECTS 256 - -static int set_jmp_vector(int entry_point, void *target) -{ - if (entry_point & ~0xffff) - return -1; - - if (((u32)target - 0xf0000) & ~0xffff) - return -1; - - printf("set_jmp_vector: 0xf000:%04x -> %p\n", - entry_point, target); - - /* jmp opcode */ - writeb(0xea, 0xf0000 + entry_point); - - /* offset */ - writew(((u32)target-0xf0000), 0xf0000 + entry_point + 1); - - /* segment */ - writew(0xf000, 0xf0000 + entry_point + 3); - - return 0; -} - -/* Install an interrupt vector */ -static void setvector(int vector, u16 segment, void *handler) -{ - u16 *ptr = (u16 *)(vector * 4); - ptr[0] = ((u32)handler - (segment << 4)) & 0xffff; - ptr[1] = segment; - -#if 0 - printf("setvector: int%02x -> %04x:%04x\n", - vector, ptr[1], ptr[0]); -#endif -} - -int bios_setup(void) -{ - /* The BIOS section is not relocated and still in the ROM. */ - ulong bios_start = (ulong)&__bios_start; - ulong bios_size = (ulong)&__bios_size; - - static int done; - int vector; -#ifdef CONFIG_PCI - struct pci_controller *pri_hose; -#endif - if (done) - return 0; - - done = 1; - - if (bios_size > 65536) { - printf("BIOS too large (%ld bytes, max is 65536)\n", - bios_size); - return -1; - } - - memcpy(BIOS_BASE, (void *)bios_start, bios_size); - - /* clear bda */ - memset(BIOS_DATA, 0, BIOS_DATA_SIZE); - - /* enter some values to the bda */ - writew(0x3f8, BIOS_DATA); /* com1 addr */ - writew(0x2f8, BIOS_DATA+2); /* com2 addr */ - writew(0x3e8, BIOS_DATA+4); /* com3 addr */ - writew(0x2e8, BIOS_DATA+6); /* com4 addr */ - writew(0x278, BIOS_DATA+8); /* lpt1 addr */ - /* - * The kernel wants to read the base memory size - * from 40:13. Put a zero there to avoid an error message - */ - writew(0, BIOS_DATA+0x13); /* base memory size */ - - - /* setup realmode interrupt vectors */ - for (vector = 0; vector < NUMVECTS; vector++) - setvector(vector, BIOS_CS, &rm_def_int); - - setvector(0x00, BIOS_CS, &rm_int00); - setvector(0x01, BIOS_CS, &rm_int01); - setvector(0x02, BIOS_CS, &rm_int02); - setvector(0x03, BIOS_CS, &rm_int03); - setvector(0x04, BIOS_CS, &rm_int04); - setvector(0x05, BIOS_CS, &rm_int05); - setvector(0x06, BIOS_CS, &rm_int06); - setvector(0x07, BIOS_CS, &rm_int07); - setvector(0x08, BIOS_CS, &rm_int08); - setvector(0x09, BIOS_CS, &rm_int09); - setvector(0x0a, BIOS_CS, &rm_int0a); - setvector(0x0b, BIOS_CS, &rm_int0b); - setvector(0x0c, BIOS_CS, &rm_int0c); - setvector(0x0d, BIOS_CS, &rm_int0d); - setvector(0x0e, BIOS_CS, &rm_int0e); - setvector(0x0f, BIOS_CS, &rm_int0f); - setvector(0x10, BIOS_CS, &rm_int10); - setvector(0x11, BIOS_CS, &rm_int11); - setvector(0x12, BIOS_CS, &rm_int12); - setvector(0x13, BIOS_CS, &rm_int13); - setvector(0x14, BIOS_CS, &rm_int14); - setvector(0x15, BIOS_CS, &rm_int15); - setvector(0x16, BIOS_CS, &rm_int16); - setvector(0x17, BIOS_CS, &rm_int17); - setvector(0x18, BIOS_CS, &rm_int18); - setvector(0x19, BIOS_CS, &rm_int19); - setvector(0x1a, BIOS_CS, &rm_int1a); - setvector(0x1b, BIOS_CS, &rm_int1b); - setvector(0x1c, BIOS_CS, &rm_int1c); - setvector(0x1d, BIOS_CS, &rm_int1d); - setvector(0x1e, BIOS_CS, &rm_int1e); - setvector(0x1f, BIOS_CS, &rm_int1f); - - set_jmp_vector(0xfff0, &realmode_reset); - set_jmp_vector(0xfe6e, &realmode_pci_bios_call_entry); - - /* fill in data area */ - RELOC_16_WORD(0xf000, ram_in_64kb_chunks) = gd->ram_size >> 16; - RELOC_16_WORD(0xf000, bios_equipment) = 0; /* FixMe */ - - /* If we assume only one PCI hose, this PCI hose - * will own PCI bus #0, and the last PCI bus of - * that PCI hose will be the last PCI bus in the - * system. - * (This, ofcause break on multi hose systems, - * but our PCI BIOS only support one hose anyway) - */ -#ifdef CONFIG_PCI - pri_hose = pci_bus_to_hose(0); - if (NULL != pri_hose) { - /* fill in last pci bus number for use by the realmode - * PCI BIOS */ - RELOC_16_BYTE(0xf000, pci_last_bus) = pri_hose->last_busno; - } -#endif - return 0; -} diff --git a/arch/x86/lib/realmode.c b/arch/x86/lib/realmode.c deleted file mode 100644 index 75511b2bdf..0000000000 --- a/arch/x86/lib/realmode.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#define REALMODE_MAILBOX ((char *)0xe00) - -int realmode_setup(void) -{ - /* The realmode section is not relocated and still in the ROM. */ - ulong realmode_start = (ulong)&__realmode_start; - ulong realmode_size = (ulong)&__realmode_size; - - /* copy the realmode switch code */ - if (realmode_size > (REALMODE_MAILBOX - (char *)REALMODE_BASE)) { - printf("realmode switch too large (%ld bytes, max is %d)\n", - realmode_size, - (int)(REALMODE_MAILBOX - (char *)REALMODE_BASE)); - return -1; - } - - memcpy((char *)REALMODE_BASE, (void *)realmode_start, realmode_size); - asm("wbinvd\n"); - - return 0; -} - -int enter_realmode(u16 seg, u16 off, struct pt_regs *in, struct pt_regs *out) -{ - - /* setup out thin bios emulation */ - if (bios_setup()) - return -1; - - if (realmode_setup()) - return -1; - - in->eip = off; - in->xcs = seg; - if ((in->esp & 0xffff) < 4) - printf("Warning: entering realmode with sp < 4 will fail\n"); - - memcpy(REALMODE_MAILBOX, in, sizeof(struct pt_regs)); - asm("wbinvd\n"); - - __asm__ volatile ( - "lcall $0x20,%0\n" : : "i" (&realmode_enter)); - - asm("wbinvd\n"); - memcpy(out, REALMODE_MAILBOX, sizeof(struct pt_regs)); - - return out->eax; -} - -/* - * This code is supposed to access a realmode interrupt - * it does currently not work for me - */ -int enter_realmode_int(u8 lvl, struct pt_regs *in, struct pt_regs *out) -{ - /* place two instructions at 0x700 */ - writeb(0xcd, 0x700); /* int $lvl */ - writeb(lvl, 0x701); - writeb(0xcb, 0x702); /* lret */ - asm("wbinvd\n"); - - enter_realmode(0x00, 0x700, in, out); - - return out->eflags & 0x00000001; -} diff --git a/arch/x86/lib/realmode_switch.S b/arch/x86/lib/realmode_switch.S deleted file mode 100644 index c4c4c4378e..0000000000 --- a/arch/x86/lib/realmode_switch.S +++ /dev/null @@ -1,232 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* 32bit -> 16bit -> 32bit mode switch code */ - -/* - * Stack frame at 0xe00 - * e00 ebx; - * e04 ecx; - * e08 edx; - * e0c esi; - * e10 edi; - * e14 ebp; - * e18 eax; - * e1c ds; - * e20 es; - * e24 fs; - * e28 gs; - * e2c orig_eax; - * e30 eip; - * e34 cs; - * e38 eflags; - * e3c esp; - * e40 ss; - */ - -#define a32 .byte 0x67; /* address size prefix 32 */ -#define o32 .byte 0x66; /* operand size prefix 32 */ - -.section .realmode, "ax" -.code16 - - /* 16bit protected mode code here */ -.globl realmode_enter -realmode_enter: -o32 pusha -o32 pushf - cli - sidt saved_idt - sgdt saved_gdt - movl %esp, %eax - movl %eax, saved_protected_mode_esp - - movl $0x10, %eax - movl %eax, %esp - movw $0x28, %ax - movw %ax, %ds - movw %ax, %es - movw %ax, %fs - movw %ax, %gs - - lidt realmode_idt_ptr - /* Go back into real mode by clearing PE to 0 */ - movl %cr0, %eax - andl $0x7ffffffe, %eax - movl %eax, %cr0 - - /* switch to real mode */ - ljmp $0x0,$do_realmode - -do_realmode: - /* realmode code from here */ - movw %cs,%ax - movw %ax,%ds - movw %ax,%es - movw %ax,%fs - movw %ax,%gs - - /* create a temporary stack */ - movw $0xc0, %ax - movw %ax, %ss - movw $0x200, %ax - movw %ax, %sp - - popl %ebx - popl %ecx - popl %edx - popl %esi - popl %edi - popl %ebp - popl %eax - movl %eax, temp_eax - popl %eax - movw %ax, %ds - popl %eax - movw %ax, %es - popl %eax - movw %ax, %fs - popl %eax - movw %ax, %gs - popl %eax /* orig_eax */ - popl %eax -cs movw %ax, temp_ip - popl %eax -cs movw %ax, temp_cs -o32 popf - popl %eax - popw %ss - movl %eax, %esp -cs movl temp_eax, %eax - - /* self-modifying code, better flush the cache */ - wbinvd - - .byte 0x9a /* lcall */ -temp_ip: - .word 0 /* new ip */ -temp_cs: - .word 0 /* new cs */ - -realmode_ret: - /* save eax, esp and ss */ -cs movl %eax, saved_eax - movl %esp, %eax -cs movl %eax, saved_esp - movw %ss, %ax -cs movw %ax, saved_ss - - /* - * restore the stack, note that we set sp to 0x244; - * pt_regs is 0x44 bytes long and we push the structure - * backwards on to the stack, bottom first - */ - movw $0xc0, %ax - movw %ax, %ss - movw $0x244, %ax - movw %ax, %sp - - xorl %eax,%eax -cs movw saved_ss, %ax - pushl %eax -cs movl saved_esp, %eax - pushl %eax -o32 pushf - xorl %eax,%eax -cs movw temp_cs, %ax - pushl %eax -cs movw temp_ip, %ax - pushl %eax - pushl $0 - movw %gs, %ax - pushl %eax - movw %fs, %ax - pushl %eax - movw %es, %ax - pushl %eax - movw %ds, %ax - pushl %eax - movl saved_eax, %eax - pushl %eax - pushl %ebp - pushl %edi - pushl %esi - pushl %edx - pushl %ecx - pushl %ebx - -o32 cs lidt saved_idt -o32 cs lgdt saved_gdt - - /* Go back into protected mode reset PE to 1 */ - movl %cr0, %eax - orl $1,%eax - movl %eax, %cr0 - - /* flush prefetch queue */ - jmp next_line -next_line: - movw $return_ptr, %ax - movw %ax,%bp -o32 cs ljmp *(%bp) - -.code32 -protected_mode: - /* Reload segment registers */ - movl $0x18, %eax - movw %ax, %fs - movw %ax, %ds - movw %ax, %gs - movw %ax, %es - movw %ax, %ss - movl saved_protected_mode_esp, %eax - movl %eax, %esp - popf - popa - ret - -temp_eax: - .long 0 - -saved_ss: - .word 0 -saved_esp: - .long 0 -saved_eax: - .long 0 - -realmode_idt_ptr: - .word 0x400 - .word 0x0, 0x0 - -saved_gdt: - .word 0, 0, 0, 0 -saved_idt: - .word 0, 0, 0, 0 - -saved_protected_mode_esp: - .long 0 - -return_ptr: - .long protected_mode - .word 0x10 diff --git a/arch/x86/lib/video.c b/arch/x86/lib/video.c index 20e2416ae1..81824f3144 100644 --- a/arch/x86/lib/video.c +++ b/arch/x86/lib/video.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include @@ -222,10 +221,5 @@ int video_init(void) int drv_video_init(void) { -#ifndef CONFIG_X86_NO_REAL_MODE - if (video_bios_init()) - return 1; -#endif - return video_init(); } diff --git a/arch/x86/lib/video_bios.c b/arch/x86/lib/video_bios.c deleted file mode 100644 index 1e06759d9e..0000000000 --- a/arch/x86/lib/video_bios.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include "bios.h" - -#undef PCI_BIOS_DEBUG -#undef VGA_BIOS_DEBUG - -#ifdef VGA_BIOS_DEBUG -#define PRINTF(fmt, args...) printf(fmt, ##args) -#else -#define PRINTF(fmt, args...) -#endif - -#define PCI_CLASS_VIDEO 3 -#define PCI_CLASS_VIDEO_STD 0 -#define PCI_CLASS_VIDEO_PROG_IF_VGA 0 - -DEFINE_PCI_DEVICE_TABLE(supported) = { - {PCI_VIDEO_VENDOR_ID, PCI_VIDEO_DEVICE_ID}, - {} -}; - -static u32 probe_pci_video(void) -{ - struct pci_controller *hose; - pci_dev_t devbusfn = pci_find_devices(supported, 0); - - if ((devbusfn != -1)) { - u32 old; - u32 addr; - - /* PCI video device detected */ - printf("Found PCI VGA device at %02x.%02x.%x\n", - PCI_BUS(devbusfn), - PCI_DEV(devbusfn), - PCI_FUNC(devbusfn)); - - /* Enable I/O decoding as well, PCI viudeo boards - * support I/O accesses, but they provide no - * bar register for this since the ports are fixed. - */ - pci_write_config_word(devbusfn, - PCI_COMMAND, - PCI_COMMAND_MEMORY | - PCI_COMMAND_IO | - PCI_COMMAND_MASTER); - - /* Test the ROM decoder, do the device support a rom? */ - pci_read_config_dword(devbusfn, PCI_ROM_ADDRESS, &old); - pci_write_config_dword(devbusfn, PCI_ROM_ADDRESS, - (u32)PCI_ROM_ADDRESS_MASK); - pci_read_config_dword(devbusfn, PCI_ROM_ADDRESS, &addr); - pci_write_config_dword(devbusfn, PCI_ROM_ADDRESS, old); - - if (!addr) { - printf("PCI VGA have no ROM?\n"); - return 0; - } - - /* device have a rom */ - if (pci_shadow_rom(devbusfn, (void *)0xc0000)) { - printf("Shadowing of PCI VGA BIOS failed\n"); - return 0; - } - - /* Now enable lagacy VGA port access */ - hose = pci_bus_to_hose(PCI_BUS(devbusfn)); - if (pci_enable_legacy_video_ports(hose)) { - printf("PCI VGA enable failed\n"); - return 0; - } - - - /* return the pci device info, that we'll need later */ - return PCI_BUS(devbusfn) << 8 | - PCI_DEV(devbusfn) << 3 | (PCI_FUNC(devbusfn) & 7); - } - - return 0; -} - -static int probe_isa_video(void) -{ - u32 ptr; - char *buf; - - ptr = isa_map_rom(0xc0000, 0x8000); - - if (!ptr) - return -1; - - buf = malloc(0x8000); - if (!buf) { - isa_unmap_rom(ptr); - return -1; - } - - if (readw(ptr) != 0xaa55) { - free(buf); - isa_unmap_rom(ptr); - return -1; - } - - /* shadow the rom */ - memcpy(buf, (void *)ptr, 0x8000); - isa_unmap_rom(ptr); - memcpy((void *)0xc0000, buf, 0x8000); - - free(buf); - - return 0; -} - -int video_bios_init(void) -{ - struct pt_regs regs; - int size; - int i; - u8 sum; - - /* clear the video bios area in case we warmbooted */ - memset((void *)0xc0000, 0, 0x8000); - memset(®s, 0, sizeof(struct pt_regs)); - - if (probe_isa_video()) - /* No ISA board found, try the PCI bus */ - regs.eax = probe_pci_video(); - - /* Did we succeed in mapping any video bios */ - if (readw(0xc0000) == 0xaa55) { - PRINTF("Found video bios signature\n"); - size = readb(0xc0002) * 512; - PRINTF("size %d\n", size); - sum = 0; - - for (i = 0; i < size; i++) - sum += readb(0xc0000 + i); - - PRINTF("Checksum is %sOK\n", sum ? "NOT " : ""); - - if (sum) - return 1; - - /* - * Some video bioses (ATI Mach64) seem to think that - * the original int 10 handler is always at - * 0xf000:0xf065 , place an iret instruction there - */ - writeb(0xcf, 0xff065); - - regs.esp = 0x8000; - regs.xss = 0x2000; - enter_realmode(0xc000, 3, ®s, ®s); - - PRINTF("INT 0x10 vector after: %04x:%04x\n", - readw(0x42), readw(0x40)); - PRINTF("BIOS returned %scarry\n", - regs.eflags & 0x00000001 ? "" : "NOT "); -#ifdef PCI_BIOS_DEBUG - print_bios_bios_stat(); -#endif - return regs.eflags & 0x00000001; - - } - - return 1; - -} diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index 46af391f29..4e9e1f77e5 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #ifdef CONFIG_SYS_COREBOOT @@ -175,16 +174,9 @@ struct boot_params *load_zimage(char *image, unsigned long kernel_size, else *load_address = (void *)ZIMAGE_LOAD_ADDR; -#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE) printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base); memset(setup_base, 0, sizeof(*setup_base)); setup_base->hdr = params->hdr; -#else - /* load setup */ - printf("Moving Real-Mode Code to 0x%8.8lx (%d bytes)\n", - (ulong)setup_base, setup_size); - memmove(setup_base, image, setup_size); -#endif if (bootproto >= 0x0204) kernel_size = hdr->syssize * 16; @@ -241,10 +233,8 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot, struct setup_header *hdr = &setup_base->hdr; int bootproto = get_boot_protocol(hdr); -#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE) setup_base->e820_entries = install_e820_map( ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map); -#endif if (bootproto == 0x0100) { setup_base->screen_info.cl_magic = COMMAND_LINE_MAGIC; @@ -300,7 +290,6 @@ void boot_zimage(void *setup_base, void *load_address) #ifdef CONFIG_SYS_COREBOOT timestamp_add_now(TS_U_BOOT_START_KERNEL); #endif -#if defined CONFIG_ZBOOT_32 /* * Set %ebx, %ebp, and %edi to 0, %esi to point to the boot_params * structure, and then jump to the kernel. We assume that %cs is @@ -317,18 +306,6 @@ void boot_zimage(void *setup_base, void *load_address) "b"(0), "D"(0) : "%ebp" ); -#else - struct pt_regs regs; - - memset(®s, 0, sizeof(struct pt_regs)); - regs.xds = (u32)setup_base >> 4; - regs.xes = regs.xds; - regs.xss = regs.xds; - regs.esp = 0x9000; - regs.eflags = 0; - enter_realmode(((u32)setup_base + SETUP_START_OFFSET) >> 4, 0, - ®s, ®s); -#endif } void setup_pcat_compatibility(void)