From: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Date: Tue, 13 Nov 2012 09:58:25 +0000 (+0000)
Subject: mx35pdk: Add support for OTG
X-Git-Tag: v2013.01-rc3~9^2~3^2~19
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=961a762838d55dc9bae8fa7ea57bc3c51a9c7b57;p=oweals%2Fu-boot.git

mx35pdk: Add support for OTG

Add support for the OTG port on the mx35pdk Personality board.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Tested-by: Stefano Babic <sbabic@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
---

diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S
index 75bb958619..da8b6f3a4e 100644
--- a/board/freescale/mx35pdk/lowlevel_init.S
+++ b/board/freescale/mx35pdk/lowlevel_init.S
@@ -94,6 +94,10 @@
 	orr r1, r1, #0x00000C00
 	orr r1, r1, #0x00000003
 	str r1, [r0, #CLKCTL_CGR1]
+
+	ldr r1, [r0, #CLKCTL_CGR2]
+	orr r1, r1, #0x00C00000
+	str r1, [r0, #CLKCTL_CGR2]
 .endm
 
 .macro setup_sdram
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index a12531fb89..4d8f2f5eea 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -98,6 +98,26 @@ static void setup_iomux_spi(void)
 	mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
 }
 
+static void setup_iomux_usbotg(void)
+{
+	int in_pad, out_pad;
+
+	/* Set up pins for USBOTG. */
+	mxc_request_iomux(MX35_PIN_USBOTG_PWR,
+			  MUX_CONFIG_SION | MUX_CONFIG_FUNC);
+	mxc_request_iomux(MX35_PIN_USBOTG_OC,
+			  MUX_CONFIG_SION | MUX_CONFIG_FUNC);
+
+	in_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE |
+		PAD_CTL_PUE_PUD | PAD_CTL_100K_PD | PAD_CTL_ODE_CMOS |
+		PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW;
+	out_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_CMOS | PAD_CTL_PKE_NONE |
+		PAD_CTL_ODE_CMOS | PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW;
+
+	mxc_iomux_set_pad(MX35_PIN_USBOTG_PWR, out_pad);
+	mxc_iomux_set_pad(MX35_PIN_USBOTG_OC, in_pad);
+}
+
 static void setup_iomux_fec(void)
 {
 	int pad;
@@ -189,6 +209,7 @@ int board_early_init_f(void)
 	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
 
 	setup_iomux_i2c();
+	setup_iomux_usbotg();
 	setup_iomux_fec();
 	setup_iomux_spi();
 
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index d89db7af15..00171a7cec 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -112,6 +112,8 @@
 #define CONFIG_NET_RETRY_COUNT	100
 #define CONFIG_CMD_DATE
 
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
 #define CONFIG_CMD_MMC
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
@@ -244,6 +246,18 @@
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_LARGEPAGE
 
+/* EHCI driver */
+#define CONFIG_USB_EHCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_MXC
+#define CONFIG_MXC_USB_PORT	0
+#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERFACE_DIFF_UNI | \
+				 MXC_EHCI_POWER_PINS_ENABLED | \
+				 MXC_EHCI_OC_PIN_ACTIVE_LOW)
+#define CONFIG_MXC_USB_PORTSC	(MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
+
 /* mmc driver */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC