From: robertcnelson@gmail.com Date: Wed, 21 Oct 2015 14:25:55 +0000 (-0500) Subject: board/ti/am335x: beaglebone stop muxing i2c1_pin_mux X-Git-Tag: v2016.01-rc1~45 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=9606f71002a97ebc02281ca06ff8981cba5becba;p=oweals%2Fu-boot.git board/ti/am335x: beaglebone stop muxing i2c1_pin_mux On the BeagleBone these i2c1 pins are routed to the expanasion header, where they can be defined as either pr1_usart0_Xxd/pwm0/spi0/i2c1, dont assume i2c1 Fixes: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/313894/1387696 Signed-off-by: Robert Nelson Reported-by: Matthijs van Duin CC: Tom Rini --- diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 28c29a2f9c..79ed02f68f 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -317,7 +317,6 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) /* Do board-specific muxes. */ if (board_is_bone(header)) { /* Beaglebone pinmux */ - configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(mii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux); #if defined(CONFIG_NAND) @@ -356,7 +355,6 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) configure_module_pin_mux(mmc0_pin_mux_sk_evm); } else if (board_is_bone_lt(header)) { /* Beaglebone LT pinmux */ - configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(mii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux); #if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)