From: INAGAKI Hiroshi Date: Tue, 5 Feb 2019 08:23:58 +0000 (+0900) Subject: ath79: add support for I-O DATA WN-AC1600DGR X-Git-Tag: v19.07.0-rc1~1298 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=93d4439454247fb3f7cc88d8ad9a7e80bb440145;p=oweals%2Fopenwrt.git ath79: add support for I-O DATA WN-AC1600DGR I-O DATA WN-AC1600DGR is a 2.4/5 GHz band 11ac router, based on Qualcomm Atheros QCA9557. Specification: - SoC: Qualcomm Atheros QCA9557 - RAM: 128 MB - Flash: 16 MB - WLAN: 2.4/5 GHz - 2.4 GHz: 2T2R (SoC internal) - 5 GHz: 3T3R (QCA9880) - Ethernet: 5x 10/100/1000 Mbps - Switch: QCA8337N - LED/key: 6x/6x(4x buttons, 1x slide switch) - UART: through-hole on PCB - Vcc, GND, TX, RX from ethernet port side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port of WN-AC1600DGR 2. Connect power cable to WN-AC1600DGR and turn on it 3. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 4. Select the OpenWrt factory image and click update ("更新") button 5. Wait ~150 seconds to complete flashing Alternative flash instruction using initramfs image: 1. Prepare a computer and TFTP server software with the IP address "192.168.99.8" and renamed OpenWrt initramfs image "uImageWN-AC1600DGR" 2. Connect between WN-AC1600DGR and the computer with UART 3. Connect power cable to WN-AC1600DGR, press "4" on the serial console and enter the U-Boot console 4. execute "tftpboot" command on the console and download initramfs image from the TFTP server 5. execute "bootm" command and boot OpenWrt 6. On initramfs image, download the sysupgrade image to the device and perform sysupgrade with it 7. Wait ~150 seconds to complete flashing This commit also removes unnecessary "qca,no-eeprom" property from the ath10k wifi node. Signed-off-by: INAGAKI Hiroshi --- diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index a63939670e..9a1063c2ae 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -109,6 +109,7 @@ ath79_setup_interfaces() ;; iodata,etg3-r|\ iodata,wn-ac1167dgr|\ + iodata,wn-ac1600dgr|\ iodata,wn-ac1600dgr2|\ iodata,wn-ag300dgr|\ pcs,cr5000) @@ -267,6 +268,7 @@ ath79_setup_macs() wan_mac=$(macaddr_add "$lan_mac" -1) ;; iodata,wn-ac1167dgr|\ + iodata,wn-ac1600dgr|\ iodata,wn-ac1600dgr2|\ iodata,wn-ag300dgr) lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 2da9250ddf..8b217d12c0 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -110,6 +110,7 @@ case "$FIRMWARE" in ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2 ;; iodata,wn-ac1167dgr|\ + iodata,wn-ac1600dgr|\ iodata,wn-ac1600dgr2|\ iodata,wn-ag300dgr) ath9k_eeprom_extract "art" 4096 1088 diff --git a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 14d4f6b9d6..2da2e8bfb0 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -19,6 +19,12 @@ case "$board" in [ "$PHYNBR" -eq 1 ] && \ echo $(macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1) > /sys${DEVPATH}/macaddress ;; + iodata,wn-ac1600dgr) + # There is no eeprom data for 5 GHz wlan in "art" partition + # which would allow to patch the macaddress + [ "$PHYNBR" -eq 0 ] && \ + echo $(macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1) > /sys${DEVPATH}/macaddress + ;; phicomm,k2t) # The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address [ "$PHYNBR" -eq 1 ] && \ diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi b/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi index 22a23f97ae..86b97437ea 100644 --- a/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi +++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi @@ -18,7 +18,7 @@ bootargs = "console=ttyS0,115200n8"; }; - leds { + leds: leds { compatible = "gpio-leds"; power: power { @@ -27,11 +27,6 @@ default-state = "on"; }; - copy { - label = "iodata:green:copy"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - }; - eco { label = "iodata:green:eco"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; @@ -55,11 +50,11 @@ }; }; - keys { + keys: keys { compatible = "gpio-keys-polled"; poll-interval = <20>; - button_eco { + eco { label = "eco"; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; linux,code = ; @@ -74,13 +69,6 @@ debounce-interval = <60>; }; - button_copy { - label = "copy"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - }; - wps { label = "wps"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; @@ -190,7 +178,6 @@ wifi@0,0 { compatible = "pci168c,003c"; reg = <0x0000 0 0 0 0>; - qca,no-eeprom; }; }; diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts index 7990d9cd57..c2fc7abcb3 100644 --- a/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts +++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts @@ -10,3 +10,19 @@ compatible = "iodata,wn-ac1167dgr", "qca,qca9557"; model = "I-O DATA WN-AC1167DGR"; }; + +&leds { + copy { + label = "iodata:green:copy"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; +}; + +&keys { + copy { + label = "copy"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; +}; diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr.dts new file mode 100644 index 0000000000..ef47e1e41f --- /dev/null +++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9557_iodata_wn-ac-dgr.dtsi" + +/ { + compatible = "iodata,wn-ac1600dgr", "qca,qca9557"; + model = "I-O DATA WN-AC1600DGR"; +}; + +&leds { + function { + label = "iodata:green:function"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; +}; + +&keys { + function { + label = "function"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; +}; diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts index 3eedec72e7..37ae8fe01f 100644 --- a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts +++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts @@ -10,3 +10,19 @@ compatible = "iodata,wn-ac1600dgr2", "qca,qca9557"; model = "I-O DATA WN-AC1600DGR2"; }; + +&leds { + copy { + label = "iodata:green:copy"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; +}; + +&keys { + copy { + label = "copy"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 94dfe3d4d7..889321867a 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -349,6 +349,18 @@ define Device/iodata_wn-ac1167dgr endef TARGET_DEVICES += iodata_wn-ac1167dgr +define Device/iodata_wn-ac1600dgr + ATH_SOC := qca9557 + DEVICE_TITLE := I-O DATA WN-AC1600DGR + IMAGE_SIZE := 14656k + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \ + senao-header -r 0x30a -p 0x60 -t 2 -v 200 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct +endef +TARGET_DEVICES += iodata_wn-ac1600dgr + define Device/iodata_wn-ac1600dgr2 ATH_SOC := qca9557 DEVICE_TITLE := I-O DATA WN-AC1600DGR2