From: Alberto Bursi Date: Fri, 22 May 2020 16:49:15 +0000 (+0200) Subject: uboot-kirkwood: enable sata in nsa310 uboot X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=930f3c014821df423507c878415c7fb4910a454d;p=oweals%2Fopenwrt.git uboot-kirkwood: enable sata in nsa310 uboot the uboot of nsa310 cannot use the network chip as it is a realtek on the PCIe lanes and not a Marvell ethernet from the SoC. Therefore tftp is not possible on this device and the only way to install is by loading files from a USB drive. If the USB subsystem is dead there is no way to install OpenWrt. Enable sata support and commands so it can be used as a fallback in case of USB issues. Signed-off-by: Alberto Bursi --- diff --git a/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch b/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch index 09dc587bf7..eea561fab8 100644 --- a/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch +++ b/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch @@ -505,7 +505,7 @@ NOTE: this patch is ready for upstream, LEDE-specific parts are in +#endif /* __NSA310_H */ --- /dev/null +++ b/configs/nsa310_defconfig -@@ -0,0 +1,48 @@ +@@ -0,0 +1,50 @@ +CONFIG_ARM=y +CONFIG_SYS_DCACHE_OFF=y +CONFIG_ARCH_CPU_INIT=y @@ -554,6 +554,8 @@ NOTE: this patch is ready for upstream, LEDE-specific parts are in +CONFIG_LZMA=y +CONFIG_LZO=y +CONFIG_SYS_LONGHELP=y ++CONFIG_SATA_MV=y ++CONFIG_CMD_IDE=y --- /dev/null +++ b/include/configs/nsa310.h @@ -0,0 +1,103 @@