From: Luochongjun Date: Fri, 23 Aug 2019 09:05:57 +0000 (+0800) Subject: ath79: add support for gl-ar750 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=921675a2d148330a7ec44f10ea4d583b8d7b5a44;p=oweals%2Fopenwrt.git ath79: add support for gl-ar750 This patch supports gl-ar750, which was previously supported by ar71xx. Specification: - SOC: QCA9531 (650MHz) - Flash: 16 MiB (W25Q128FVSG) - RAM: 128 MiB DDR2 - Ethernet: 10/100: 2xLAN + 10/100: 1xWAN - Wireless: 2.4GHz (bgn) and 5GHz (ac) - USB: 1x USB 2.0 port - Switch: 1x switch - Button: 1x reset button - LED: 3x LEDS (white) Flash instruction: Support for sysupgrade directive upgrades, as well as luci upgrades. Signed-off-by: Luochongjun --- diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index cb0853ecb9..454f57d3dd 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -156,6 +156,11 @@ ath79_setup_interfaces() etactica,eg200) ucidef_set_interface_lan "eth0" "dhcp" ;; + glinet,gl-ar750) + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" + ;; glinet,gl-ar750s) ucidef_add_switch "switch0" \ "0@eth0" "2:lan:2" "3:lan:1" "1:wan" diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 421fb7d66c..ed3432273c 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -122,6 +122,7 @@ case "$FIRMWARE" in ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; + glinet,gl-ar750|\ glinet,gl-ar750s) ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts new file mode 100644 index 0000000000..54aad320f6 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca953x.dtsi" + +/ { + compatible = "glinet,gl-ar750", "qca,qca9531"; + model = "GL.iNet GL-AR750"; + + keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + mode { + label = "mode"; + linux,code = ; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "gl-ar750:white:power"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan2g { + label = "gl-ar750:white:wlan2g"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wlan5g { + label = "gl-ar750:white:wlan5g"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + }; + + i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + +}; + +&pcie0 { + status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + device_type = "pci"; + }; +}; + +&uart { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + read-only; + }; + + art: partition@50000 { + label = "art"; + reg = <0x050000 0x010000>; + read-only; + }; + + partition@60000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x060000 0xfa0000>; + }; + }; + }; +}; + +ð0 { + status = "okay"; + mtd-mac-address = <&art 0x0>; + phy-handle = <&swphy4>; +}; + +ð1 { + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <1>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 6f1ad5b708..eed0e2b683 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -557,6 +557,16 @@ define Device/glinet_gl-ar300m-nor endef TARGET_DEVICES += glinet_gl-ar300m-nor +define Device/glinet_gl-ar750 + ATH_SOC := qca9531 + DEVICE_VENDOR := GL.iNet + DEVICE_MODEL := GL-AR750 + DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct + IMAGE_SIZE := 16000k + SUPPORTED_DEVICES += gl-ar750 +endef +TARGET_DEVICES += glinet_gl-ar750 + define Device/glinet_gl-ar750s ATH_SOC := qca9563 DEVICE_VENDOR := GL.iNet