From: Michal Simek Date: Wed, 27 Mar 2019 19:14:19 +0000 (+0100) Subject: arm64: zynqmp: Add System Controller for a2197-g/p X-Git-Tag: v2020.01-rc1~30^2~33 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=917c57845a749613132bd5a8665a61166b5b4a61;p=oweals%2Fu-boot.git arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek Signed-off-by: Harini Katakam --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 78c0b09c27..dd1060acd6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -248,6 +248,8 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ avnet-ultra96-rev1.dtb \ avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \ zynqmp-a2197-revA.dtb \ + zynqmp-a2197-g-revA.dtb \ + zynqmp-a2197-p-revA.dtb \ zynqmp-mini.dtb \ zynqmp-mini-emmc0.dtb \ zynqmp-mini-emmc1.dtb \ diff --git a/arch/arm/dts/zynqmp-a2197-g-revA.dts b/arch/arm/dts/zynqmp-a2197-g-revA.dts new file mode 100644 index 0000000000..c6072b5f42 --- /dev/null +++ b/arch/arm/dts/zynqmp-a2197-g-revA.dts @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller on MGT + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include + +/ { + model = "Versal System Controller on a2197 MGT Char board RevA"; + compatible = "xlnx,zynqmp-a2197-g-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + mmc0 = &sdhci0; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &dcc; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&sdhci0 { /* emmc MIO 13-23 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio_bank = <0>; +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&gem0 { /* eth MDIO 76/77 */ + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + is-internal-pcspma; + phy0: phy@0 { /* marwell m88e1512 */ + reg = <0>; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; +/* xlnx,phy-type = ; */ + }; +/* phy-names = "..."; + phys = <&lane0 PHY_TYPE_SGMII ... > + Note: lane0 sgmii/lane1 usb3 */ +}; + +&gpio { + status = "okay"; + gpio-line-names = "", "", "", "", "", /* 0 - 4 */ + "", "", "", "", "", /* 5 - 9 */ + "", "", "", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "", "", "", "", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "", "", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "", "", "ETH_RESET_B", "", "", /* 40 - 44 */ + "", "", "", "", "", /* 45 - 49 */ + "", "", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */ + "", "", "", "", "", /* 65 - 69 */ + "", "", "", "", "", /* 70 - 74 */ + "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */ + "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */ + "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */ + "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */ + "SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */ + "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */ + "SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */ + "SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */ + "SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */ + "SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */ + "SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */ + "PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */ + "TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */ + "PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */ + "MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + scl-gpios = <&gpio 34 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + i2c-mux@74 { /* u94 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@50 { /* u96 - 24LC32A - 256B */ + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + i2c@1 { /* CM_I2C_SCL - Samtec */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c@2 { /* PMBUS - AFX_PMBUS */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + tps544@d { /* u85 */ + compatible = "ti,tps544b25"; + reg = <0xd>; + }; + tps544@10 { /* u73 */ + compatible = "ti,tps544b25"; + reg = <0x10>; + }; + tps544@11 { /* u76 */ + compatible = "ti,tps544b25"; + reg = <0x11>; + }; + tps544@12 { /* u77 */ + compatible = "ti,tps544b25"; + reg = <0x12>; + }; + tps544@13 { /* u80 */ + compatible = "ti,tps544b25"; + reg = <0x13>; + }; + tps544@14 { /* u81 */ + compatible = "ti,tps544b25"; + reg = <0x14>; + }; + tps544@15 { /* u83 */ + compatible = "ti,tps544b25"; + reg = <0x15>; + }; + tps544@16 { /* u63 */ + compatible = "ti,tps544b25"; + reg = <0x16>; + }; + tps544@17 { /* u66 */ + compatible = "ti,tps544b25"; + reg = <0x17>; + }; + tps544@18 { /* u67 */ + compatible = "ti,tps544b25"; + reg = <0x18>; + }; + tps544@19 { /* u69 */ + compatible = "ti,tps544b25"; + reg = <0x19>; + }; + tps544@1d { /* u88 */ + compatible = "ti,tps544b25"; + reg = <0x1d>; + }; + tps544@1e { /* u89 */ + compatible = "ti,tps544b25"; + reg = <0x1e>; + }; + tps544@1f { /* u87 */ + compatible = "ti,tps544b25"; + reg = <0x1f>; + }; + tps544@20 { /* u71 */ + compatible = "ti,tps544b25"; + reg = <0x20>; + }; + ina226@40 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina226@41 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <1000>; + }; + ina226@44 { /* u82 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina226@45 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + tps53681@c0 { /* u53 - FIXME name - don't know what it does - also vcc_io_soc */ + compatible = "ti,tps53681"; /* FIXME no linux driver */ + reg = <0xc0>; + }; + }; + i2c@3 { /* fmc1 via JA2G */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + eeprom_fmc1: eeprom@50 { /* on FMC */ + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + i2c@4 { /* fmc2 via JA3G */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + eeprom_fmc2: eeprom@50 { /* on FMC */ + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + i2c@5 { /* fmc3 via JA4G */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + eeprom_fmc3: eeprom@50 { /* on FMC */ + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + i2c@6 { /* ddr dimm */ + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + /* 7 unused */ + }; +}; + +&usb0 { /* USB0 MIO52-63 */ + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "peripheral"; + maximum-speed = "high-speed"; +}; diff --git a/arch/arm/dts/zynqmp-a2197-p-revA.dts b/arch/arm/dts/zynqmp-a2197-p-revA.dts new file mode 100644 index 0000000000..322b36e391 --- /dev/null +++ b/arch/arm/dts/zynqmp-a2197-p-revA.dts @@ -0,0 +1,567 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include + +/ { + model = "Versal System Controller on a2197 Processor Char board RevA"; /* Tenzing */ + compatible = "xlnx,zynqmp-a2197-p-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + /* xlnx,fmc-eeprom = FIXME */ + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */ + }; +}; + +&sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio_bank = <0>; +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&uart1 { /* uart1 MIO40-41 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&sdhci1 { /* sd1 MIO45-51 cd in place */ + status = "okay"; + no-1-8-v; + disable-wp; + xlnx,mio_bank = <1>; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; /* DTG generates this properly 1512 */ + is-internal-pcspma; + /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */ + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = "", "", "", "", "", /* 0 - 4 */ + "", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */ + "DC_SYS_CTRL3", "DC_SYS_CTRL4", "DC_SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "", "", "", "", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */ + "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */ + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */ + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */ + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */ + "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */ + "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */ + "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */ + "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */ + "SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */ + "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */ + "SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */ + "SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */ + "SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */ + "SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */ + "SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */ + "PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */ + "TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */ + "PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */ + "MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + i2c-mux@74 { /* u33 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ + i2c@0 { /* PMBUS1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* On connector J98 */ + reg_vcc_fmc: tps544@7 { /* u80 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x7>; + regulator-name = "reg_vcc_fmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + /* enable-gpio = <&gpio0 23 0x4>; optional */ + }; + reg_vcc_ram: tps544@8 { /* u83 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x8>; + }; + reg_vcc_pslp: tps544@9 { /* u85 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x9>; + }; + reg_vcc_psfp: tps544@a { /* u86 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xa>; + }; + reg_vccint: tps53681@c0 { /* u70 - FIXME name - don't know what it does - also vcc_io_soc */ + compatible = "ti,tps53681"; /* FIXME no linux driver */ + reg = <0xc0>; + /* vccint, vcc_io_soc */ + }; + }; + i2c@1 { /* PMBUS1_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* FIXME check alerts comming to SC */ + vcc_fmc: ina226@42 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcc_ram: ina226@43 { /* u82 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcc_pslp: ina226@44 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + vcc_psfp: ina226@45 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { /* PMBUS2 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* On connector J104 */ + reg_vccaus: tps544@d { /* u88 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xd>; + }; + reg_vccaux_fmc: tps544@e { /* u90 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xe>; + }; + reg_vcco_500: tps544@f { /* u93 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xf>; + }; + reg_vcco_501: tps544@10 { /* u95 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x10>; + }; + reg_vcco_502: tps544@11 { /* u97 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x11>; + }; + reg_vcco_503: tps544@12 { /* u99 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x12>; + }; + reg_vcc1v8: tps544@13 { /* u101 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x13>; + }; + reg_vcc3v3: tps544@14 { /* u102 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x14>; + }; + reg_vcc1v2_ddr4: tps544@15 { /* u104 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x15>; + }; + reg_vcc1v1_lp4: tps544@16 { /* u106 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x16>; + }; + reg_vcc1_1V8_lp4: tps544@17 { /* u108 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x17>; + }; + reg_vadj_fmc: tps544@19 { /* u109 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x19>; + }; + reg_mgtyavcc: tps544@1a { /* u111 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1a>; + }; + reg_mgtyavtt: tps544@1b { /* u114 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1b>; + }; + reg_mgtyvccaux: tps544@1c { /* u115 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1c>; + }; + reg_util_1v13: tps544@1d { /* u117 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1d>; + }; + reg_util_1v8: tps544@1e { /* u118 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1e>; + }; + reg_util_2v5: tps544@1f { /* u119 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1f>; + }; + }; + i2c@3 { /* PMBUS2_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* FIXME check alerts coming to SC */ + vccaux: ina226@40 { /* u89 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + vccaux_fmc: ina226@41 { /* u91 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + vcco_500: ina226@42 { /* u92 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcco_501: ina226@43 { /* u94 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcco_502: ina226@44 { /* u96 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + vcco_503: ina226@45 { /* u98 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + vcc_1v8: ina226@46 { /* u100 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + vcc_3v3: ina226@47 { /* u103 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + vcc_1v2_ddr4: ina226@48 { /* u105 */ + compatible = "ti,ina226"; + reg = <0x48>; + shunt-resistor = <1000>; + }; + vcc1v1_lp4: ina226@49 { /* u107 */ + compatible = "ti,ina226"; + reg = <0x49>; + shunt-resistor = <5000>; + }; + vadj_fmc: ina226@4a { /* u110 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + mgtyavcc: ina226@4b { /* u112 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <1000>; + }; + mgtyavtt: ina226@4c { /* u113 */ + compatible = "ti,ina226"; + reg = <0x4c>; + shunt-resistor = <1000>; + }; + mgtyvccaux: ina226@4d { /* u116 */ + compatible = "ti,ina226"; + reg = <0x4d>; + shunt-resistor = <5000>; + }; + vcc_bat: ina226@4e { /* u12 */ + compatible = "ti,ina226"; + reg = <0x4e>; + shunt-resistor = <10000000>; /* 10 ohm */ + }; + }; + i2c@4 { /* LP_I2C_SM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* connected to J212G */ + /* zynqmp sm alert or samtec J212H */ + }; + /* 5-7 unused */ + }; +}; + +&i2c1 { /* i2c1 MIO 36-37 */ + status = "okay"; + clock-frequency = <400000>; + + /* Must be enabled via J242 */ + eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */ + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + i2c-mux@74 { /* u35 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */ + dc_i2c: i2c@0 { /* DC_I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@54 { /* u34 - m24128 16kB */ + compatible = "st,24c128", "atmel,24c128"; + reg = <0x54>; + }; + si570_ref_clk: clock-generator@5d { /* u32 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* 570JAC000900DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* Connection via Samtec J212D */ + /* Use for storing information about X-PRC card */ + x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */ + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + /* Use for setting up certain features on X-PRC card */ + x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */ + compatible = "nxp,pca9534"; + reg = <0x22>; + gpio-controller; /* IRQ not connected */ + #gpio-cells = <2>; + gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4", + "", "", "", ""; + gtr_sel0 { + gpio-hog; + gpios = <0 0>; + input; /* FIXME add meaning */ + line-name = "sw4_1"; + }; + gtr_sel1 { + gpio-hog; + gpios = <1 0>; + input; /* FIXME add meaning */ + line-name = "sw4_2"; + }; + gtr_sel2 { + gpio-hog; + gpios = <2 0>; + input; /* FIXME add meaning */ + line-name = "sw4_3"; + }; + gtr_sel3 { + gpio-hog; + gpios = <3 0>; + input; /* FIXME add meaning */ + line-name = "sw4_4"; + }; + }; + }; + i2c@1 { /* FMCP1_IIC */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* FIXME connection to Samtec J51C */ + /* expected eeprom 0x50 SE cards */ + }; + i2c@2 { /* FMCP2_IIC */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* FIXME connection to Samtec J53C */ + /* expected eeprom 0x50 SE cards */ + }; + i2c@3 { /* DDR4_DIMM1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_ddr_dimm1: clock-generator@60 { /* u2 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; /* 570BAB000299DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* 0x50 SPD? */ + }; + i2c@4 { /* DDR4_DIMM2 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si570_ddr_dimm2: clock-generator@60 { /* u3 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; /* 570BAB000299DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* 0x50 SPD? */ + }; + i2c@5 { /* LPDDR4_SI570_CLK */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + si570_lpddr4: clock-generator@60 { /* u4 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; /* 570BAB000299DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "LPDDR4_SI570_CLK"; + }; + }; + i2c@6 { /* HSDP_SI570 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + si570_hsdp: clock-generator@5d { /* u5 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* 570JAC000900DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "HSDP_SI570"; + }; + }; + i2c@7 { /* PCIE_CLK */ + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* u36 0xd8 or 0xde - pcie clk buf - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */ + /* u37 0xd0 DNP - pcie clocking 1 - 9FGV1006BQ505LTGI - PCIe GEN 4 CLOCK GENERATOR FIXME - no linux driver */ + /* u38 0xca - pcie clocking 2 - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */ + clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 - pcie clocking 3 */ + #clock-cells = <1>; /* author David Cater */ + compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */ + reg = <0xd8>; + /* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */ + /* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */ + + }; + + }; + }; +}; + +&usb0 { + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "peripheral"; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + maximum-speed = "super-speed"; +}; + +&usb1 { + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_1 { + /delete-property/ phy-names ; + /delete-property/ phys ; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk ; + snps,dis_u3_susphy_quirk ; + status = "okay"; +}; + +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; diff --git a/board/xilinx/zynqmp/zynqmp-a2197-g-revA b/board/xilinx/zynqmp/zynqmp-a2197-g-revA new file mode 120000 index 0000000000..a64c140b86 --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-a2197-g-revA @@ -0,0 +1 @@ +zynqmp-a2197-revA \ No newline at end of file diff --git a/board/xilinx/zynqmp/zynqmp-a2197-p-revA b/board/xilinx/zynqmp/zynqmp-a2197-p-revA new file mode 120000 index 0000000000..a64c140b86 --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-a2197-p-revA @@ -0,0 +1 @@ +zynqmp-a2197-revA \ No newline at end of file diff --git a/configs/xilinx_zynqmp_a2197_g_revA_defconfig b/configs/xilinx_zynqmp_a2197_g_revA_defconfig new file mode 100644 index 0000000000..2f6dc7641a --- /dev/null +++ b/configs/xilinx_zynqmp_a2197_g_revA_defconfig @@ -0,0 +1,116 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_SYS_PROMPT="ZynqMP> " +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-g-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_a2197_p_revA_defconfig b/configs/xilinx_zynqmp_a2197_p_revA_defconfig new file mode 100644 index 0000000000..4ce634cdaa --- /dev/null +++ b/configs/xilinx_zynqmp_a2197_p_revA_defconfig @@ -0,0 +1,117 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_SPL_ZYNQMP_TWO_SDHCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_SYS_PROMPT="ZynqMP> " +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-p-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_a2197_revA_defconfig b/configs/xilinx_zynqmp_a2197_revA_defconfig index 2d70805dc3..2859ef553e 100644 --- a/configs/xilinx_zynqmp_a2197_revA_defconfig +++ b/configs/xilinx_zynqmp_a2197_revA_defconfig @@ -44,6 +44,7 @@ CONFIG_CMD_TIMER=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-revA" +CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-a2197-g-revA zynqmp-a2197-p-revA" CONFIG_ENV_IS_IN_FAT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y