From: Piotr Dymacz Date: Sat, 19 Aug 2017 16:26:46 +0000 (+0200) Subject: ar71xx: add support for GL.iNet GL-USB150 X-Git-Tag: v18.06.0-rc1~2283 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=90d8c0f0a2f4c902348a2f514ba33f2c9c34e005;p=oweals%2Fopenwrt.git ar71xx: add support for GL.iNet GL-USB150 GL.iNet GL-USB150 is an USB dongle WiFi router, based on Atheros AR9331. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - Realtek RTL8152B USB to Ethernet bridge (connected with AR9331 PHY4) - 1T1R 2.4 GHz - 2x LED, 1x button - UART header on PCB Flash instruction: Vendor firmware is based on OpenWrt CC. GUI or sysupgrade can be used to flash LEDE firmware. Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 4132e919e4..f367885488 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -53,6 +53,7 @@ ap121f) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ;; ap531b0|\ +gl-usb150|\ sc1750|\ sc450) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index ba54d89b8f..5fa8c2f4c8 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -75,6 +75,7 @@ ar71xx_setup_interfaces() eap7660d|\ el-mini|\ fritz300e|\ + gl-usb150|\ hiveap-121|\ loco-m-xw|\ mr12|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 7753a7156d..6794d89115 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -59,6 +59,7 @@ get_status_led() { archer-c59-v1|\ archer-c60-v1|\ fritz300e|\ + gl-usb150|\ mr12|\ mr16|\ nbg6616|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 7fd5fb4522..2eab6108f1 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -672,6 +672,9 @@ ar71xx_board_detect() { *"GL-MIFI") name="gl-mifi" ;; + *"GL-USB150") + name="gl-usb150" + ;; *"HiveAP-121") name="hiveap-121" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 05b5634aa5..fcf329478c 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -250,6 +250,7 @@ platform_check_image() { gl-ar300|\ gl-domino|\ gl-mifi|\ + gl-usb150|\ hiwifi-hc6361|\ hornet-ub-x2|\ jwap230|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 70793af3a3..c747af918a 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -116,6 +116,7 @@ CONFIG_ATH79_MACH_GL_AR300M=y CONFIG_ATH79_MACH_GL_DOMINO=y CONFIG_ATH79_MACH_GL_INET=y CONFIG_ATH79_MACH_GL_MIFI=y +CONFIG_ATH79_MACH_GL_USB150=y CONFIG_ATH79_MACH_GS_MINIBOX_V1=y CONFIG_ATH79_MACH_GS_OOLITE=y # CONFIG_ATH79_MACH_HIVEAP_121 is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index ff9c3037a1..6b6188dc7b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -768,6 +768,15 @@ config ATH79_MACH_GL_INET select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_GL_USB150 + bool "GL.iNet GL-USB150 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_EAP120 bool "TP-LINK EAP120 support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 469b6a794c..9e91c44060 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -120,6 +120,7 @@ obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o +obj-$(CONFIG_ATH79_MACH_GL_USB150) += mach-gl-usb150.o obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o obj-$(CONFIG_ATH79_MACH_HIVEAP_121) += mach-hiveap-121.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c new file mode 100644 index 0000000000..6cc27e1ada --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c @@ -0,0 +1,87 @@ +/* + * GL.iNet GL-USB150 board support + * + * Copyright (C) 2017 Piotr Dymacz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define GL_USB150_GPIO_LED_POWER 13 +#define GL_USB150_GPIO_LED_WLAN 0 +#define GL_USB150_GPIO_LAN_RESET 7 +#define GL_USB150_GPIO_BTN_RESET 11 + +#define GL_USB150_KEYS_POLL_INTERVAL 20 +#define GL_USB150_KEYS_DEBOUNCE_INTERVAL \ + (3 * GL_USB150_KEYS_POLL_INTERVAL) + +#define GL_USB150_WMAC_CALDATA_OFFSET 0x1000 + +static struct gpio_led gl_usb150_leds_gpio[] __initdata = { + { + .name = "gl-usb150:green:power", + .gpio = GL_USB150_GPIO_LED_POWER, + .active_low = 0, + }, { + .name = "gl-usb150:green:wlan", + .gpio = GL_USB150_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button gl_usb150_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = GL_USB150_KEYS_DEBOUNCE_INTERVAL, + .gpio = GL_USB150_GPIO_BTN_RESET, + .active_low = 0, + }, +}; + +static void __init gl_usb150_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_setup_ar933x_phy4_switch(false, false); + + /* LAN (PHY4 connected with Realtek RTL8152B) */ + ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); + ath79_register_mdio(0, 0x0); + ath79_register_eth(0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_usb150_leds_gpio), + gl_usb150_leds_gpio); + + ath79_register_gpio_keys_polled(-1, GL_USB150_KEYS_POLL_INTERVAL, + ARRAY_SIZE(gl_usb150_gpio_keys), + gl_usb150_gpio_keys); + + gpio_request_one(GL_USB150_GPIO_LAN_RESET, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, + "LAN reset"); + + ath79_register_wmac(art + GL_USB150_WMAC_CALDATA_OFFSET, NULL); +} + +MIPS_MACHINE(ATH79_MACH_GL_USB150, "GL-USB150", "GL.iNet GL-USB150", + gl_usb150_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 5bc50a42ff..16fbdcef84 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -112,6 +112,7 @@ enum ath79_mach_type { ATH79_MACH_GL_DOMINO, /* Domino */ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ ATH79_MACH_GL_MIFI, /* GL-MIFI support */ + ATH79_MACH_GL_USB150, /* GL.iNet GL-USB150 */ ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ ATH79_MACH_HIVEAP_121, /* Aerohive HiveAP-121*/ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 01c5bdc677..f0b2179f44 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -278,6 +278,19 @@ define Device/gl-mifi endef TARGET_DEVICES += gl-mifi +define Device/gl-usb150 + DEVICE_TITLE := GL.iNet GL-USB150 + DEVICE_PACKAGES := -swconfig + BOARDNAME := GL-USB150 + IMAGE_SIZE := 16000k + CONSOLE := ttyATH0,115200 + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro + SUPPORTED_DEVICES := gl-usb150 + IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += gl-usb150 + define Device/lima DEVICE_TITLE := 8devices Lima DEVICE_PACKAGES := kmod-usb-core kmod-usb2 diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index 34c2fc1f0f..83e3a03877 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -80,6 +80,7 @@ # CONFIG_ATH79_MACH_GL_DOMINO is not set # CONFIG_ATH79_MACH_GL_INET is not set # CONFIG_ATH79_MACH_GL_MIFI is not set +# CONFIG_ATH79_MACH_GL_USB150 is not set # CONFIG_ATH79_MACH_GS_MINIBOX_V1 is not set # CONFIG_ATH79_MACH_GS_OOLITE is not set # CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index 57318b38e8..99eb346e15 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -81,6 +81,7 @@ CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y # CONFIG_ATH79_MACH_GL_DOMINO is not set # CONFIG_ATH79_MACH_GL_INET is not set # CONFIG_ATH79_MACH_GL_MIFI is not set +# CONFIG_ATH79_MACH_GL_USB150 is not set # CONFIG_ATH79_MACH_GS_MINIBOX_V1 is not set # CONFIG_ATH79_MACH_GS_OOLITE is not set CONFIG_ATH79_MACH_HIVEAP_121=y