From: Felix Fietkau Date: Tue, 10 Jun 2014 09:05:55 +0000 (+0000) Subject: atheros: various printk(...) fixes X-Git-Tag: reboot~6982 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=90ca9a582dcbdc6dd4f8f7f6ab015c0fe99ce1e8;p=oweals%2Fopenwrt.git atheros: various printk(...) fixes Use more particular functions dev_ or pr_(...) insead of direct printk(...) call. Add KERN_LEVEL to calls what missed it. Signed-off-by: Sergey Ryazanov SVN-Revision: 41088 --- diff --git a/target/linux/atheros/patches-3.10/100-board.patch b/target/linux/atheros/patches-3.10/100-board.patch index 5c81e02a16..4816667474 100644 --- a/target/linux/atheros/patches-3.10/100-board.patch +++ b/target/linux/atheros/patches-3.10/100-board.patch @@ -84,7 +84,7 @@ +obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o --- /dev/null +++ b/arch/mips/ar231x/board.c -@@ -0,0 +1,259 @@ +@@ -0,0 +1,260 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -209,7 +209,7 @@ + } + + if (!found) { -+ printk("Could not find Radio Configuration data\n"); ++ pr_warn("WARNING: Could not find Radio Configuration data\n"); + radio_config = 0; + } + @@ -243,7 +243,7 @@ + } + + if (!bcfg) { -+ printk(KERN_WARNING "WARNING: No board configuration data found!\n"); ++ pr_warn("WARNING: No board configuration data found!\n"); + return -ENODEV; + } + @@ -251,10 +251,10 @@ + ar231x_board.config = (struct ar231x_boarddata *) board_data; + memcpy(board_data, bcfg, 0x100); + if (broken_boarddata) { -+ printk(KERN_WARNING "WARNING: broken board data detected\n"); ++ pr_warn("WARNING: broken board data detected\n"); + config = ar231x_board.config; + if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) { -+ printk(KERN_INFO "Fixing up empty mac addresses\n"); ++ pr_info("Fixing up empty mac addresses\n"); + config->reset_config_gpio = 0xffff; + config->sys_led_gpio = 0xffff; + random_ether_addr(config->wlan0_mac); @@ -279,13 +279,14 @@ + radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff); + ar231x_board.radio = radio_data; + offset = radio_data - board_data; -+ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset); ++ pr_info("Radio config found at offset 0x%x (0x%x)\n", rcfg - bcfg, ++ offset); + rcfg_size = BOARD_CONFIG_BUFSZ - offset; + memcpy(radio_data, rcfg, rcfg_size); + + mac_addr = &radio_data[0x1d * 2]; + if (is_broadcast_ether_addr(mac_addr)) { -+ printk(KERN_INFO "Radio MAC is blank; using board-data\n"); ++ pr_info("Radio MAC is blank; using board-data\n"); + memcpy(mac_addr, ar231x_board.config->wlan0_mac, ETH_ALEN); + } + @@ -1640,8 +1641,9 @@ + u32 dma1 = ar231x_read_reg(AR531X_DMA1); + u32 dma_addr = ar231x_read_reg(AR531X_DMAADDR); /* clears error */ + -+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", -+ proc_addr, proc1, dma_addr, dma1); ++ pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x " ++ "DMAADDR=0x%8.8x DMA1=0x%8.8x\n", proc_addr, proc1, dma_addr, ++ dma1); + + machine_restart("AHB error"); /* Catastrophic failure */ + return IRQ_HANDLED; @@ -2057,12 +2059,11 @@ + gpch = &ar5312_gpio_chip; + ret = gpiochip_add(&gpch->chip); + if (ret) { -+ printk(KERN_ERR "%s: failed to add gpiochip\n", -+ gpch->chip.label); ++ pr_err("%s: failed to add gpiochip\n", gpch->chip.label); + return ret; + } -+ printk(KERN_INFO "%s: registered %d GPIOs\n", -+ gpch->chip.label, gpch->chip.ngpio); ++ pr_info("%s: registered %d GPIOs\n", gpch->chip.label, ++ gpch->chip.ngpio); + return ret; +} + @@ -2108,7 +2109,7 @@ + --- /dev/null +++ b/arch/mips/ar231x/ar2315.c -@@ -0,0 +1,692 @@ +@@ -0,0 +1,691 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -2322,7 +2323,7 @@ + ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET); + ar231x_read_reg(AR2315_AHB_ERR1); + -+ printk(KERN_ERR "AHB fatal error\n"); ++ pr_emerg("AHB fatal error\n"); + machine_restart("AHB error"); /* Catastrophic failure */ + + return IRQ_HANDLED; @@ -2742,12 +2743,11 @@ + gpch = &ar2315_gpio_chip; + ret = gpiochip_add(&gpch->chip); + if (ret) { -+ printk(KERN_ERR "%s: failed to add gpiochip\n", -+ gpch->chip.label); ++ pr_err("%s: failed to add gpiochip\n", gpch->chip.label); + return ret; + } -+ printk(KERN_INFO "%s: registered %d GPIOs\n", -+ gpch->chip.label, gpch->chip.ngpio); ++ pr_info("%s: registered %d GPIOs\n", gpch->chip.label, ++ gpch->chip.ngpio); + return ret; +} + diff --git a/target/linux/atheros/patches-3.10/120-spiflash.patch b/target/linux/atheros/patches-3.10/120-spiflash.patch index ef9cb91622..7876de18fb 100644 --- a/target/linux/atheros/patches-3.10/120-spiflash.patch +++ b/target/linux/atheros/patches-3.10/120-spiflash.patch @@ -251,7 +251,7 @@ + flash_size = FLASH_16MB; + break; + default: -+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n"); ++ pr_warn(SPIFLASH "Read of flash device signature failed!\n"); + return 0; + } + @@ -454,19 +454,19 @@ + + priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE); + if (!priv->mmraddr) { -+ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n"); ++ dev_warn(&pdev->dev, SPIFLASH "Failed to map flash device\n"); + goto error; + } + + index = spiflash_probe_chip(priv); + if (!index) { -+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n"); ++ dev_warn(&pdev->dev, SPIFLASH "Found no flash device\n"); + goto error; + } + + priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt); + if (!priv->readaddr) { -+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n"); ++ dev_warn(&pdev->dev, SPIFLASH "Failed to map flash device\n"); + goto error; + } + diff --git a/target/linux/atheros/patches-3.10/130-watchdog.patch b/target/linux/atheros/patches-3.10/130-watchdog.patch index 97b79b9a1d..7cc8fee9cb 100644 --- a/target/linux/atheros/patches-3.10/130-watchdog.patch +++ b/target/linux/atheros/patches-3.10/130-watchdog.patch @@ -1,6 +1,6 @@ --- /dev/null +++ b/drivers/watchdog/ar2315-wtd.c -@@ -0,0 +1,197 @@ +@@ -0,0 +1,200 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by @@ -80,10 +80,12 @@ +} + +static irqreturn_t -+ar2315_wdt_interrupt(int irq, void *dev_id) ++ar2315_wdt_interrupt(int irq, void *dev) +{ ++ struct platform_device *pdev = (struct platform_device *)dev; ++ + if (started) { -+ printk(KERN_CRIT "watchdog expired, rebooting system\n"); ++ dev_crit(&pdev->dev, "watchdog expired, rebooting system\n"); + emergency_restart(); + } else { + ar231x_write_reg(AR2315_WDC, 0); @@ -150,15 +152,16 @@ + int ret = 0; + + ar2315_wdt_enable(); -+ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL); ++ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, ++ IRQF_DISABLED, "ar2315_wdt", dev); + if (ret) { -+ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n"); ++ dev_err(&dev->dev, "failed to register inetrrupt\n"); + goto out; + } + + ret = misc_register(&ar2315_wdt_miscdev); + if(ret) -+ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n"); ++ dev_err(&dev->dev, "failed to register miscdev\n"); + +out: + return ret; @@ -186,7 +189,7 @@ +{ + int ret = platform_driver_register(&ar2315_wdt_driver); + if(ret) -+ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!"); ++ pr_err("ar2315_wdt: error registering platfom driver!\n"); + return ret; +} +