From: Sascha Hauer Date: Sun, 30 Mar 2008 10:28:46 +0000 (+0100) Subject: Separate omap24xx specific code from arm1136 X-Git-Tag: v1.3.3-rc1~115^2~7 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=8bf69d81782619187933a605f1a95ee1d069478d;p=oweals%2Fu-boot.git Separate omap24xx specific code from arm1136 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx. Signed-off-by: Sascha Hauer Signed-off-by: Guennadi Liakhovetski --- diff --git a/Makefile b/Makefile index b9b09cb589..9a49aecd7e 100644 --- a/Makefile +++ b/Makefile @@ -2590,12 +2590,12 @@ zylonite_config : ## ARM1136 Systems ######################################################################### omap2420h4_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 + @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx apollon_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) $(@:_config=) arm arm1136 apollon + @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk #======================================================================== diff --git a/cpu/arm1136/Makefile b/cpu/arm1136/Makefile index d5ac7d3fd9..7701b03bbe 100644 --- a/cpu/arm1136/Makefile +++ b/cpu/arm1136/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = interrupts.o cpu.o +COBJS = cpu.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c index fa78eaa7f0..90e955303b 100644 --- a/cpu/arm1136/cpu.c +++ b/cpu/arm1136/cpu.c @@ -33,9 +33,6 @@ #include #include -#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) -#include -#endif #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; @@ -47,10 +44,10 @@ static unsigned long read_p15_c1 (void) unsigned long value; __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); + "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" + : "=r" (value) + : + : "memory"); return value; } diff --git a/cpu/arm1136/interrupts.c b/cpu/arm1136/interrupts.c deleted file mode 100644 index 491c902ace..0000000000 --- a/cpu/arm1136/interrupts.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments - * Richard Woodruff - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * Alex Zuepke - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) -# include -#endif - -#define TIMER_LOAD_VAL 0 - -/* macro to read the 32 bit timer */ -#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR)) - -#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR) -/* Use the IntegratorCP function from board/integratorcp.c */ -#else - -static ulong timestamp; -static ulong lastinc; - -/* nothing really to do with interrupts, just starts up a counter. */ -int interrupt_init (void) -{ - int32_t val; - - /* Start the counter ticking up */ - *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/ - val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/ - *((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */ - - reset_timer_masked(); /* init the timestamp and lastinc value */ - - return(0); -} -/* - * timer without interrupts - */ -void reset_timer (void) -{ - reset_timer_masked (); -} - -ulong get_timer (ulong base) -{ - return get_timer_masked () - base; -} - -void set_timer (ulong t) -{ - timestamp = t; -} - -/* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) -{ - ulong tmo, tmp; - - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CFG_HZ; - tmo /= (1000*1000); - } - - tmp = get_timer (0); /* get current timestamp */ - if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */ - reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */ - else - tmo += tmp; /* else, set advancing stamp wake up time */ - while (get_timer_masked () < tmo)/* loop till event */ - /*NOP*/; -} - -void reset_timer_masked (void) -{ - /* reset time */ - lastinc = READ_TIMER; /* capture current incrementer value time */ - timestamp = 0; /* start "advancing" time stamp from 0 */ -} - -ulong get_timer_masked (void) -{ - ulong now = READ_TIMER; /* current tick value */ - - if (now >= lastinc) /* normal mode (non roll) */ - timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */ - else /* we have rollover of incrementer */ - timestamp += (0xFFFFFFFF - lastinc) + now; - lastinc = now; - return timestamp; -} - -/* waits specified delay value and resets timestamp */ -void udelay_masked (unsigned long usec) -{ - ulong tmo; - ulong endtime; - signed long diff; - - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CFG_HZ; - tmo /= (1000*1000); - } - endtime = get_timer_masked () + tmo; - - do { - ulong now = get_timer_masked (); - diff = endtime - now; - } while (diff >= 0); -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk (void) -{ - ulong tbclk; - tbclk = CFG_HZ; - return tbclk; -} -#endif /* !Integrator/CP */ diff --git a/cpu/arm1136/omap24xx/Makefile b/cpu/arm1136/omap24xx/Makefile new file mode 100644 index 0000000000..39b0a82811 --- /dev/null +++ b/cpu/arm1136/omap24xx/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundatio; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS = interrupts.o +SOBJS = start.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm1136/omap24xx/interrupts.c b/cpu/arm1136/omap24xx/interrupts.c new file mode 100644 index 0000000000..5963d621bd --- /dev/null +++ b/cpu/arm1136/omap24xx/interrupts.c @@ -0,0 +1,180 @@ +/* + * (C) Copyright 2004 + * Texas Instruments + * Richard Woodruff + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * Alex Zuepke + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#define TIMER_LOAD_VAL 0 + +/* macro to read the 32 bit timer */ +#define READ_TIMER (*volatile ulong*(CFG_TIMERBASE+TCRR)) + +static ulong timestamp; +static ulong lastinc; + +/* + * nothing really to do with interrupts, just starts up a counter. + */ +int interrupt_init(void) +{ + int32_t val; + + /* Start the counter ticking up */ + /* reload value on overflow*/ + *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; + /* mask to enable timer*/ + val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; + *((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */ + + reset_timer_masked(); /* init the timestamp and lastinc value */ + + return(0); +} +/* + * timer without interrupts + */ +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + timestamp = t; +} + +/* delay x useconds AND perserve advance timstamp value */ +void udelay(unsigned long usec) +{ + ulong tmo, tmp; + + /* if "big" number, spread normalization to seconds */ + if (usec >= 1000) { + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CFG_HZ; + /* finish normalize. */ + tmo /= 1000; + } else { + /* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CFG_HZ; + tmo /= (1000*1000); + } + /* get current timestamp */ + tmp = get_timer(0); + if ((tmo + tmp + 1) < tmp) + /* setting this forward will roll time stamp */ + /* reset "advancing" timestamp to 0, set lastinc value */ + reset_timer_masked(); + else + /* else, set advancing stamp wake up time */ + tmo += tmp; + while (get_timer_masked() < tmo)/* loop till event */ + /*NOP*/; +} + +void reset_timer_masked(void) +{ + /* reset time */ + /* capture current incrementer value time */ + lastinc = READ_TIMER; + /* start "advancing" time stamp from 0 */ + timestamp = 0; +} + +ulong get_timer_masked(void) +{ + ulong now = READ_TIMER; /* current tick value */ + + /* normal mode (non roll) */ + if (now >= lastinc) + /* move stamp forward with absolute diff ticks */ + timestamp += (now - lastinc); + else + /* we have rollover of incrementer */ + timestamp += (0xFFFFFFFF - lastinc) + now; + lastinc = now; + return timestamp; +} + +/* waits specified delay value and resets timestamp */ +void udelay_masked(unsigned long usec) +{ + ulong tmo; + ulong endtime; + signed long diff; + + if (usec >= 1000) { + /* "big" number, spread normalization to seconds */ + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CFG_HZ; + tmo /= 1000;/* finish normalize. */ + } else { + /* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CFG_HZ; + tmo /= (1000*1000); + } + endtime = get_timer_masked() + tmo; + + do { + ulong now = get_timer_masked(); + diff = endtime - now; + } while (diff >= 0); +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + ulong tbclk; + tbclk = CFG_HZ; + return tbclk; +} diff --git a/cpu/arm1136/omap24xx/start.S b/cpu/arm1136/omap24xx/start.S new file mode 100644 index 0000000000..5634312970 --- /dev/null +++ b/cpu/arm1136/omap24xx/start.S @@ -0,0 +1,42 @@ +/* + * armboot - Startup Code for OMP2420/ARM1136 CPU-core + * + * Copyright (c) 2004 Texas Instruments + * + * Copyright (c) 2001 Marius Gr??ger + * Copyright (c) 2002 Alex Z??pke + * Copyright (c) 2002 Gary Jennejohn + * Copyright (c) 2003 Richard Woodruff + * Copyright (c) 2003 Kshitij + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +.globl reset_cpu +reset_cpu: + ldr r1, rstctl /* get addr for global reset reg */ + mov r3, #0x2 /* full reset pll+mpu */ + str r3, [r1] /* force reset */ + mov r0, r0 +_loop_forever: + b _loop_forever +rstctl: + .word PM_RSTCTRL_WKUP diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S index 8b765f1e80..56009d0fb3 100644 --- a/cpu/arm1136/start.S +++ b/cpu/arm1136/start.S @@ -30,9 +30,6 @@ #include #include -#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) -#include -#endif .globl _start _start: b reset #ifdef CONFIG_ONENAND_IPL @@ -438,22 +435,4 @@ fiq: arm1136_cache_flush: mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache mov pc, lr @ back to caller - -#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR) -/* Use the IntegratorCP function from board/integratorcp/platform.S */ -#else - - .align 5 -.globl reset_cpu -reset_cpu: - ldr r1, rstctl /* get addr for global reset reg */ - mov r3, #0x2 /* full reset pll+mpu */ - str r3, [r1] /* force reset */ - mov r0, r0 -_loop_forever: - b _loop_forever -rstctl: - .word PM_RSTCTRL_WKUP - -#endif #endif /* CONFIG_ONENAND_IPL */ diff --git a/include/asm-arm/arch-arm1136/bits.h b/include/asm-arm/arch-arm1136/bits.h deleted file mode 100644 index 8522335bfc..0000000000 --- a/include/asm-arm/arch-arm1136/bits.h +++ /dev/null @@ -1,48 +0,0 @@ -/* bits.h - * Copyright (c) 2004 Texas Instruments - * - * This package is free software; you can redistribute it and/or - * modify it under the terms of the license found in the file - * named COPYING that should have accompanied this file. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ -#ifndef __bits_h -#define __bits_h 1 - -#define BIT0 (1<<0) -#define BIT1 (1<<1) -#define BIT2 (1<<2) -#define BIT3 (1<<3) -#define BIT4 (1<<4) -#define BIT5 (1<<5) -#define BIT6 (1<<6) -#define BIT7 (1<<7) -#define BIT8 (1<<8) -#define BIT9 (1<<9) -#define BIT10 (1<<10) -#define BIT11 (1<<11) -#define BIT12 (1<<12) -#define BIT13 (1<<13) -#define BIT14 (1<<14) -#define BIT15 (1<<15) -#define BIT16 (1<<16) -#define BIT17 (1<<17) -#define BIT18 (1<<18) -#define BIT19 (1<<19) -#define BIT20 (1<<20) -#define BIT21 (1<<21) -#define BIT22 (1<<22) -#define BIT23 (1<<23) -#define BIT24 (1<<24) -#define BIT25 (1<<25) -#define BIT26 (1<<26) -#define BIT27 (1<<27) -#define BIT28 (1<<28) -#define BIT29 (1<<29) -#define BIT30 (1<<30) -#define BIT31 (1<<31) - -#endif diff --git a/include/asm-arm/arch-arm1136/clocks.h b/include/asm-arm/arch-arm1136/clocks.h deleted file mode 100644 index 2a95af1810..0000000000 --- a/include/asm-arm/arch-arm1136/clocks.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_CLOCKS_H_ -#define _OMAP24XX_CLOCKS_H_ - -#define COMMIT_DIVIDERS 0x1 - -#define MODE_BYPASS_FAST 0x2 -#define APLL_LOCK 0xc -#ifdef CONFIG_APTIX -#define DPLL_LOCK 0x1 /* stay in bypass mode */ -#else -#define DPLL_LOCK 0x3 /* DPLL lock */ -#endif - -/****************************************************************************; -; PRCM Scheme II -; -; Enable clocks and DPLL for: -; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50 -; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] -; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0] -; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0] -; DSPI=100 6 CM_CLKSEL_DSP[6:5] -; DSP_S bypass CM_CLKSEL_DSP[7] -; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8] -; IVAF=100 auto -; IVAI auto -; IVA_MPU auto -; IVA_S bypass CM_CLKSEL_DSP[13] -; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0] -; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20] -; SSI_SSTF=100 auto -; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0] -; L4=100Mhz 6 -; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5] -***************************************************************************/ -#define II_DPLL_OUT_X2 0x2 /* x2 core out */ -#define II_MPU_DIV 0x2 /* mpu = core/2 */ -#define II_DSP_DIV 0x343 /* dsp & iva divider */ -#define II_GFX_DIV 0x2 -#define II_BUS_DIV 0x04601026 -#define II_DPLL_300 0x01832100 - -/****************************************************************************; -; PRCM Scheme III -; -; Enable clocks and DPLL for: -; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266 -; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] -; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0] -; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0] -; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5] -; DSP_S ACTIVATED CM_CLKSEL_DSP[7] -; IVAF=88.67 (dsp domain) /3 CM_CLKSEL_DSP[12:8] -; IVAF=88.67 auto -; IVAI auto -; IVA_MPU auto -; IVA_S ACTIVATED CM_CLKSEL_DSP[13] -; GFXF=66.5 (gfx domain) /8 CM_CLKSEL_FGX[2:0]: -; SSI_SSRF=177.3 /3 CM_CLKSEL1_CORE[24:20] -; SSI_SSTF=88.67 auto -; L3=133Mhz (sdram) /4 CM_CLKSEL1_CORE[4:0] -; L4=66.5Mhz /8 -; C_L4_USB=33.25 /16 CM_CLKSEL1_CORE[6:5] -***************************************************************************/ -#define III_DPLL_OUT_X2 0x2 /* x2 core out */ -#define III_MPU_DIV 0x2 /* mpu = core/2 */ -#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/ -#define III_GFX_DIV 0x2 -#define III_BUS_DIV 0x08301044 -#define III_DPLL_266 0x01885500 - -/* set defaults for boot up */ -#ifdef PRCM_CONFIG_II -# define DPLL_OUT II_DPLL_OUT_X2 -# define MPU_DIV II_MPU_DIV -# define DSP_DIV II_DSP_DIV -# define GFX_DIV II_GFX_DIV -# define BUS_DIV II_BUS_DIV -# define DPLL_VAL II_DPLL_300 -#elif PRCM_CONFIG_III -# define DPLL_OUT III_DPLL_OUT_X2 -# define MPU_DIV III_MPU_DIV -# define DSP_DIV III_DSP_DIV -# define GFX_DIV III_GFX_DIV -# define BUS_DIV III_BUS_DIV -# define DPLL_VAL III_DPLL_266 -#endif - -/* lock delay time out */ -#define LDELAY 12000000 - -#endif diff --git a/include/asm-arm/arch-arm1136/i2c.h b/include/asm-arm/arch-arm1136/i2c.h deleted file mode 100644 index 7248950e52..0000000000 --- a/include/asm-arm/arch-arm1136/i2c.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_I2C_H_ -#define _OMAP24XX_I2C_H_ - -#define I2C_BASE 0x48070000 -#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */ - -#define I2C_REV (I2C_BASE + 0x00) -#define I2C_IE (I2C_BASE + 0x04) -#define I2C_STAT (I2C_BASE + 0x08) -#define I2C_IV (I2C_BASE + 0x0c) -#define I2C_BUF (I2C_BASE + 0x14) -#define I2C_CNT (I2C_BASE + 0x18) -#define I2C_DATA (I2C_BASE + 0x1c) -#define I2C_SYSC (I2C_BASE + 0x20) -#define I2C_CON (I2C_BASE + 0x24) -#define I2C_OA (I2C_BASE + 0x28) -#define I2C_SA (I2C_BASE + 0x2c) -#define I2C_PSC (I2C_BASE + 0x30) -#define I2C_SCLL (I2C_BASE + 0x34) -#define I2C_SCLH (I2C_BASE + 0x38) -#define I2C_SYSTEST (I2C_BASE + 0x3c) - -/* I2C masks */ - -/* I2C Interrupt Enable Register (I2C_IE): */ -#define I2C_IE_GC_IE (1 << 5) -#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ -#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ -#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ -#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ -#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ - -/* I2C Status Register (I2C_STAT): */ - -#define I2C_STAT_SBD (1 << 15) /* Single byte data */ -#define I2C_STAT_BB (1 << 12) /* Bus busy */ -#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ -#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ -#define I2C_STAT_AAS (1 << 9) /* Address as slave */ -#define I2C_STAT_GC (1 << 5) -#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ -#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ -#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ -#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ -#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ - - -/* I2C Interrupt Code Register (I2C_INTCODE): */ - -#define I2C_INTCODE_MASK 7 -#define I2C_INTCODE_NONE 0 -#define I2C_INTCODE_AL 1 /* Arbitration lost */ -#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ -#define I2C_INTCODE_ARDY 3 /* Register access ready */ -#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ -#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ - -/* I2C Buffer Configuration Register (I2C_BUF): */ - -#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ -#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ - -/* I2C Configuration Register (I2C_CON): */ - -#define I2C_CON_EN (1 << 15) /* I2C module enable */ -#define I2C_CON_BE (1 << 14) /* Big endian mode */ -#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ -#define I2C_CON_MST (1 << 10) /* Master/slave mode */ -#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */ -#define I2C_CON_XA (1 << 8) /* Expand address */ -#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ -#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ - -/* I2C System Test Register (I2C_SYSTEST): */ - -#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ -#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */ -#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ -#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ -#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ -#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ -#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ -#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ - -#endif diff --git a/include/asm-arm/arch-arm1136/mem.h b/include/asm-arm/arch-arm1136/mem.h deleted file mode 100644 index c81f1c4370..0000000000 --- a/include/asm-arm/arch-arm1136/mem.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP24XX_MEM_H_ -#define _OMAP24XX_MEM_H_ - -#define SDRC_CS0_OSET 0x0 -#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ - -#ifndef __ASSEMBLY__ -/* struct's for holding data tables for current boards, they are getting used - early in init when NO global access are there */ -struct sdrc_data_s { - u32 sdrc_sharing; - u32 sdrc_mdcfg_0_ddr; - u32 sdrc_mdcfg_0_sdr; - u32 sdrc_actim_ctrla_0; - u32 sdrc_actim_ctrlb_0; - u32 sdrc_rfr_ctrl; - u32 sdrc_mr_0_ddr; - u32 sdrc_mr_0_sdr; - u32 sdrc_dllab_ctrl; -} /*__attribute__ ((packed))*/; -typedef struct sdrc_data_s sdrc_data_t; - -typedef enum { - STACKED = 0, - IP_DDR = 1, - COMBO_DDR = 2, - IP_SDR = 3, -} mem_t; - -#endif - -/* Slower full frequency range default timings for x32 operation*/ -#define H4_2420_SDRC_SHARING 0x00000100 -#define H4_2420_SDRC_MDCFG_0_SDR 0x00D04010 /* discrete sdr module */ -#define H4_2420_SDRC_MR_0_SDR 0x00000031 -#define H4_2420_SDRC_MDCFG_0_DDR 0x01702011 /* descrite ddr module */ -#define H4_2420_COMBO_MDCFG_0_DDR 0x00801011 /* combo module */ -#define H4_2420_SDRC_MR_0_DDR 0x00000032 - -#define H4_2422_SDRC_SHARING 0x00004b00 -#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked ddr on 2422 */ -#define H4_2422_SDRC_MR_0_DDR 0x00000032 - -/* ES1 work around timings */ -#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1 0x9bead909 /* 165Mhz for use with 100/133 */ -#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020 -#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */ - -/* optimized timings good for current shipping parts */ -#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485 -#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e -#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */ -#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */ -#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01 -#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01 -#define H4_242x_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/ -#define H4_242x_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 72deg, for ES2 */ - -#ifdef PRCM_CONFIG_II -# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -#elif PRCM_CONFIG_III -# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz -# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz -# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz -# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_133MHz -# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -#endif - - -/* GPMC settings */ -#ifdef PRCM_CONFIG_II /* L3 at 100MHz */ -# ifdef CFG_NAND_BOOT -# define H4_24XX_GPMC_CONFIG1_0 0x0 -# define H4_24XX_GPMC_CONFIG2_0 0x00141400 -# define H4_24XX_GPMC_CONFIG3_0 0x00141400 -# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 -# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* else NOR */ -# define H4_24XX_GPMC_CONFIG1_0 0x3 -# define H4_24XX_GPMC_CONFIG2_0 0x000f0f01 -# define H4_24XX_GPMC_CONFIG3_0 0x00050502 -# define H4_24XX_GPMC_CONFIG4_0 0x0C060C06 -# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F -# endif /* endif CFG_NAND_BOOT */ -# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) -# define H4_24XX_GPMC_CONFIG1_1 0x00011000 -# define H4_24XX_GPMC_CONFIG2_1 0x001F1F00 -# define H4_24XX_GPMC_CONFIG3_1 0x00080802 -# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F -# define H4_24XX_GPMC_CONFIG6_1 0x000003C2 -# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) -#endif /* endif PRCM_CONFIG_II */ - -#ifdef PRCM_CONFIG_III /* L3 at 133MHz */ -# ifdef CFG_NAND_BOOT -# define H4_24XX_GPMC_CONFIG1_0 0x0 -# define H4_24XX_GPMC_CONFIG2_0 0x00141400 -# define H4_24XX_GPMC_CONFIG3_0 0x00141400 -# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 -# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* NOR boot */ -# define H4_24XX_GPMC_CONFIG1_0 0x3 -# define H4_24XX_GPMC_CONFIG2_0 0x00151501 -# define H4_24XX_GPMC_CONFIG3_0 0x00060602 -# define H4_24XX_GPMC_CONFIG4_0 0x10081008 -# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F -# define H4_24XX_GPMC_CONFIG6_0 0x000004c4 -# endif /* endif CFG_NAND_BOOT */ -# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) -# define H4_24XX_GPMC_CONFIG1_1 0x00011000 -# define H4_24XX_GPMC_CONFIG2_1 0x001f1f01 -# define H4_24XX_GPMC_CONFIG3_1 0x00080803 -# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define H4_24XX_GPMC_CONFIG5_1 0x041f1F1F -# define H4_24XX_GPMC_CONFIG6_1 0x000004C4 -# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) -#endif /* endif CFG_PRCM_III */ - -#endif /* endif _OMAP24XX_MEM_H_ */ diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-arm1136/mux.h deleted file mode 100644 index 4fdb9c635f..0000000000 --- a/include/asm-arm/arch-arm1136/mux.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP2420_MUX_H_ -#define _OMAP2420_MUX_H_ - -#ifndef __ASSEMBLY__ -typedef unsigned char uint8; -typedef unsigned int uint32; - -void muxSetupSDRC(void); -void muxSetupGPMC(void); -void muxSetupUsb0(void); -void muxSetupUsbHost(void); -void muxSetupUart3(void); -void muxSetupI2C1(void); -void muxSetupUART1(void); -void muxSetupLCD(void); -void muxSetupCamera(void); -void muxSetupMMCSD(void) ; -void muxSetupTouchScreen(void) ; -void muxSetupHDQ(void); -#endif - -#define USB_OTG_CTRL ((volatile uint32 *)0x4805E30C) - -/* Pin Muxing registers used for HDQ (Smart battery) */ -#define CONTROL_PADCONF_HDQ_SIO ((volatile unsigned char *)0x48000115) - -/* Pin Muxing registers used for GPMC */ -#define CONTROL_PADCONF_GPMC_D2_BYTE0 ((volatile unsigned char *)0x48000088) -#define CONTROL_PADCONF_GPMC_D2_BYTE1 ((volatile unsigned char *)0x48000089) -#define CONTROL_PADCONF_GPMC_D2_BYTE2 ((volatile unsigned char *)0x4800008A) -#define CONTROL_PADCONF_GPMC_D2_BYTE3 ((volatile unsigned char *)0x4800008B) - -#define CONTROL_PADCONF_GPMC_NCS0_BYTE0 ((volatile unsigned char *)0x4800008C) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE4 (0x48000090) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE5 (0x48000091) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE6 (0x48000092) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE7 (0x48000093) - -/* Pin Muxing registers used for SDRC */ -#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3) - -#define CONTROL_PADCONF_SDRC_A14_BYTE0 ((volatile unsigned char *)0x48000030) -#define CONTROL_PADCONF_SDRC_A14_BYTE1 ((volatile unsigned char *)0x48000031) -#define CONTROL_PADCONF_SDRC_A14_BYTE2 ((volatile unsigned char *)0x48000032) -#define CONTROL_PADCONF_SDRC_A14_BYTE3 ((volatile unsigned char *)0x48000033) - -/* Pin Muxing registers used for Touch Screen (SPI) */ -#define CONTROL_PADCONF_SPI1_CLK ((volatile unsigned char *)0x480000FF) -#define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100) -#define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101) -#define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102) -#define CONTROL_PADCONF_SPI1_NCS1 (0x48000103) - -#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B) - -/* Pin Muxing registers used for MMCSD */ -#define CONTROL_PADCONF_MMC_CLKI ((volatile unsigned char *)0x480000FE) -#define CONTROL_PADCONF_MMC_CLKO ((volatile unsigned char *)0x480000F3) -#define CONTROL_PADCONF_MMC_CMD ((volatile unsigned char *)0x480000F4) -#define CONTROL_PADCONF_MMC_DAT0 ((volatile unsigned char *)0x480000F5) -#define CONTROL_PADCONF_MMC_DAT1 ((volatile unsigned char *)0x480000F6) -#define CONTROL_PADCONF_MMC_DAT2 ((volatile unsigned char *)0x480000F7) -#define CONTROL_PADCONF_MMC_DAT3 ((volatile unsigned char *)0x480000F8) -#define CONTROL_PADCONF_MMC_DAT_DIR0 ((volatile unsigned char *)0x480000F9) -#define CONTROL_PADCONF_MMC_DAT_DIR1 ((volatile unsigned char *)0x480000FA) -#define CONTROL_PADCONF_MMC_DAT_DIR2 ((volatile unsigned char *)0x480000FB) -#define CONTROL_PADCONF_MMC_DAT_DIR3 ((volatile unsigned char *)0x480000FC) -#define CONTROL_PADCONF_MMC_CMD_DIR ((volatile unsigned char *)0x480000FD) - -#define CONTROL_PADCONF_SDRC_A14 ((volatile unsigned char *)0x48000030) -#define CONTROL_PADCONF_SDRC_A13 ((volatile unsigned char *)0x48000031) - -/* Pin Muxing registers used for CAMERA */ -#define CONTROL_PADCONF_SYS_NRESWARM ((volatile unsigned char *)0x4800012B) - -#define CONTROL_PADCONF_CAM_XCLK ((volatile unsigned char *)0x480000DC) -#define CONTROL_PADCONF_CAM_LCLK ((volatile unsigned char *)0x480000DB) -#define CONTROL_PADCONF_CAM_VS ((volatile unsigned char *)0x480000DA) -#define CONTROL_PADCONF_CAM_HS ((volatile unsigned char *)0x480000D9) -#define CONTROL_PADCONF_CAM_D0 ((volatile unsigned char *)0x480000D8) -#define CONTROL_PADCONF_CAM_D1 ((volatile unsigned char *)0x480000D7) -#define CONTROL_PADCONF_CAM_D2 ((volatile unsigned char *)0x480000D6) -#define CONTROL_PADCONF_CAM_D3 ((volatile unsigned char *)0x480000D5) -#define CONTROL_PADCONF_CAM_D4 ((volatile unsigned char *)0x480000D4) -#define CONTROL_PADCONF_CAM_D5 ((volatile unsigned char *)0x480000D3) -#define CONTROL_PADCONF_CAM_D6 ((volatile unsigned char *)0x480000D2) -#define CONTROL_PADCONF_CAM_D7 ((volatile unsigned char *)0x480000D1) -#define CONTROL_PADCONF_CAM_D8 ((volatile unsigned char *)0x480000D0) -#define CONTROL_PADCONF_CAM_D9 ((volatile unsigned char *)0x480000CF) - -/* Pin Muxing registers used for LCD */ -#define CONTROL_PADCONF_DSS_D0 ((volatile unsigned char *)0x480000B3) -#define CONTROL_PADCONF_DSS_D1 ((volatile unsigned char *)0x480000B4) -#define CONTROL_PADCONF_DSS_D2 ((volatile unsigned char *)0x480000B5) -#define CONTROL_PADCONF_DSS_D3 ((volatile unsigned char *)0x480000B6) -#define CONTROL_PADCONF_DSS_D4 ((volatile unsigned char *)0x480000B7) -#define CONTROL_PADCONF_DSS_D5 ((volatile unsigned char *)0x480000B8) -#define CONTROL_PADCONF_DSS_D6 ((volatile unsigned char *)0x480000B9) -#define CONTROL_PADCONF_DSS_D7 ((volatile unsigned char *)0x480000BA) -#define CONTROL_PADCONF_DSS_D8 ((volatile unsigned char *)0x480000BB) -#define CONTROL_PADCONF_DSS_D9 ((volatile unsigned char *)0x480000BC) -#define CONTROL_PADCONF_DSS_D10 ((volatile unsigned char *)0x480000BD) -#define CONTROL_PADCONF_DSS_D11 ((volatile unsigned char *)0x480000BE) -#define CONTROL_PADCONF_DSS_D12 ((volatile unsigned char *)0x480000BF) -#define CONTROL_PADCONF_DSS_D13 ((volatile unsigned char *)0x480000C0) -#define CONTROL_PADCONF_DSS_D14 ((volatile unsigned char *)0x480000C1) -#define CONTROL_PADCONF_DSS_D15 ((volatile unsigned char *)0x480000C2) -#define CONTROL_PADCONF_DSS_D16 ((volatile unsigned char *)0x480000C3) -#define CONTROL_PADCONF_DSS_D17 ((volatile unsigned char *)0x480000C4) -#define CONTROL_PADCONF_DSS_PCLK ((volatile unsigned char *)0x480000CB) -#define CONTROL_PADCONF_DSS_VSYNC ((volatile unsigned char *)0x480000CC) -#define CONTROL_PADCONF_DSS_HSYNC ((volatile unsigned char *)0x480000CD) -#define CONTROL_PADCONF_DSS_ACBIAS ((volatile unsigned char *)0x480000CE) - -/* Pin Muxing registers used for UART1 */ -#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5) -#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6) -#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7) -#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8) - -/* Pin Muxing registers used for I2C1 */ -#define CONTROL_PADCONF_I2C1_SCL ((volatile unsigned char *)0x48000111) -#define CONTROL_PADCONF_I2C1_SDA ((volatile unsigned char *)0x48000112) - -/* Pin Muxing registres used for USB0. */ -#define CONTROL_PADCONF_USB0_PUEN ((volatile uint8 *)0x4800011D) -#define CONTROL_PADCONF_USB0_VP ((volatile uint8 *)0x4800011E) -#define CONTROL_PADCONF_USB0_VM ((volatile uint8 *)0x4800011F) -#define CONTROL_PADCONF_USB0_RCV ((volatile uint8 *)0x48000120) -#define CONTROL_PADCONF_USB0_TXEN ((volatile uint8 *)0x48000121) -#define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122) -#define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123) - -/* Pin Muxing registres used for USB1. */ -#define CONTROL_PADCONF_USB1_RCV (0x480000EB) -#define CONTROL_PADCONF_USB1_TXEN (0x480000EC) - -/* Pin Muxing registers used for UART3/IRDA */ -#define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118) -#define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119) - -/* Pin Muxing registers used for GPIO */ -#define CONTROL_PADCONF_GPIO69 (0x480000ED) -#define CONTROL_PADCONF_GPIO70 (0x480000EE) -#define CONTROL_PADCONF_GPIO102 (0x48000116) -#define CONTROL_PADCONF_GPIO103 (0x48000117) -#define CONTROL_PADCONF_GPIO104 (0x48000118) -#define CONTROL_PADCONF_GPIO105 (0x48000119) - -#endif diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h deleted file mode 100644 index 0c11beccf6..0000000000 --- a/include/asm-arm/arch-arm1136/omap2420.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP2420_SYS_H_ -#define _OMAP2420_SYS_H_ - -#include - -/* - * 2420 specific Section - */ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 -/* #define GP_DEVICE (BIT8|BIT9) FIXME -- commented out to make compile -- FIXME */ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 - -/* CONTROL */ -#define OMAP2420_CTRL_BASE (0x48000000) -#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) - -/* device type */ -#define TST_DEVICE 0x0 -#define EMU_DEVICE 0x1 -#define HS_DEVICE 0x2 -#define GP_DEVICE 0x3 - -/* TAP information */ -#define OMAP2420_TAP_BASE (0x48014000) -#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) -#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208) - -/* GPMC */ -#define OMAP2420_GPMC_BASE (0x6800A000) -#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) -#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) -#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) -#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) -#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) -#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) -#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) -#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) -#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) -#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) -#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) -#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) -#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) -#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) -#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) -#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) -#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) -#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) -#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0) -#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4) -#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8) -#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC) -#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0) -#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4) -#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8) -#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0) -#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4) -#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8) -#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC) -#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100) -#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104) -#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108) - -/* SMS */ -#define OMAP2420_SMS_BASE 0x68008000 -#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) -#define SMS_CLASS_ARB0 (OMAP2420_SMS_BASE+0xD0) -# define BURSTCOMPLETE_GROUP7 BIT31 - -/* SDRC */ -#define OMAP2420_SDRC_BASE 0x68009000 -#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) -#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) -#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40) -#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) -#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) -#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) -#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) -#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) -#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) -#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) -#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) -#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) -#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) -#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) -#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) -#define OMAP2420_SDRC_CS0 0x80000000 -#define OMAP2420_SDRC_CS1 0xA0000000 -#define CMD_NOP 0x0 -#define CMD_PRECHARGE 0x1 -#define CMD_AUTOREFRESH 0x2 -#define CMD_ENTR_PWRDOWN 0x3 -#define CMD_EXIT_PWRDOWN 0x4 -#define CMD_ENTR_SRFRSH 0x5 -#define CMD_CKE_HIGH 0x6 -#define CMD_CKE_LOW 0x7 -#define SOFTRESET BIT1 -#define SMART_IDLE (0x2 << 3) -#define REF_ON_IDLE (0x1 << 6) - - -/* UART */ -#define OMAP2420_UART1 0x4806A000 -#define OMAP2420_UART2 0x4806C000 -#define OMAP2420_UART3 0x4806E000 - -/* General Purpose Timers */ -#define OMAP2420_GPT1 0x48028000 -#define OMAP2420_GPT2 0x4802A000 -#define OMAP2420_GPT3 0x48078000 -#define OMAP2420_GPT4 0x4807A000 -#define OMAP2420_GPT5 0x4807C000 -#define OMAP2420_GPT6 0x4807E000 -#define OMAP2420_GPT7 0x48080000 -#define OMAP2420_GPT8 0x48082000 -#define OMAP2420_GPT9 0x48084000 -#define OMAP2420_GPT10 0x48086000 -#define OMAP2420_GPT11 0x48088000 -#define OMAP2420_GPT12 0x4808A000 - -/* timer regs offsets (32 bit regs) */ -#define TIDR 0x0 /* r */ -#define TIOCP_CFG 0x10 /* rw */ -#define TISTAT 0x14 /* r */ -#define TISR 0x18 /* rw */ -#define TIER 0x1C /* rw */ -#define TWER 0x20 /* rw */ -#define TCLR 0x24 /* rw */ -#define TCRR 0x28 /* rw */ -#define TLDR 0x2C /* rw */ -#define TTGR 0x30 /* rw */ -#define TWPS 0x34 /* r */ -#define TMAR 0x38 /* rw */ -#define TCAR1 0x3c /* r */ -#define TSICR 0x40 /* rw */ -#define TCAR2 0x44 /* r */ - -/* WatchDog Timers (1 secure, 3 GP) */ -#define WD1_BASE 0x48020000 -#define WD2_BASE 0x48022000 -#define WD3_BASE 0x48024000 -#define WD4_BASE 0x48026000 -#define WWPS 0x34 /* r */ -#define WSPR 0x48 /* rw */ -#define WD_UNLOCK1 0xAAAA -#define WD_UNLOCK2 0x5555 - -/* PRCM */ -#define OMAP2420_CM_BASE 0x48008000 -#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) -#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) -#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) -#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) -#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) -#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) -#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) -#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) -#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) -#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) -#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) -#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) -#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) -#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) -#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) -#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) - -/* - * H4 specific Section - */ - -/* - * The 2420's chip selects are programmable. The mask ROM - * does configure CS0 to 0x08000000 before dispatch. So, if - * you want your code to live below that address, you have to - * be prepared to jump though hoops, to reset the base address. - */ -#if defined(CONFIG_OMAP2420H4) -/* GPMC */ -#ifdef CONFIG_VIRTIO_A /* Pre version B */ -# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x04000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#else -# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x08000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#endif - -/* base address for indirect vectors (internal boot mode) */ -#define SRAM_OFFSET0 0x40000000 -#define SRAM_OFFSET1 0x00200000 -#define SRAM_OFFSET2 0x0000F800 -#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) - -/* FPGA on Debug board.*/ -#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) -#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) -#endif /* endif CONFIG_2420H4 */ - -#if defined(CONFIG_APOLLON) -#define APOLLON_CS0_BASE 0x00000000 /* OneNAND */ -#define APOLLON_CS1_BASE 0x08000000 /* ethernet */ -#define APOLLON_CS2_BASE 0x10000000 /* OneNAND */ -#define APOLLON_CS3_BASE 0x18000000 /* NOR */ - -#define ETH_CONTROL_REG (APOLLON_CS1_BASE + 0x30b) -#define LAN_RESET_REGISTER (APOLLON_CS1_BASE + 0x1c) -#endif /* endif CONFIG_APOLLON */ - -/* Common */ -#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -#define PERIFERAL_PORT_BASE 0x480FE003 - -#endif diff --git a/include/asm-arm/arch-arm1136/sizes.h b/include/asm-arm/arch-arm1136/sizes.h deleted file mode 100644 index aaba18f150..0000000000 --- a/include/asm-arm/arch-arm1136/sizes.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* Size defintions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_32K 0x00008000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_31M 0x01F00000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif /* __sizes_h */ diff --git a/include/asm-arm/arch-arm1136/sys_info.h b/include/asm-arm/arch-arm1136/sys_info.h deleted file mode 100644 index 53c231a5e4..0000000000 --- a/include/asm-arm/arch-arm1136/sys_info.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP24XX_SYS_INFO_H_ -#define _OMAP24XX_SYS_INFO_H_ - -typedef struct h4_system_data { - /* base board info */ - u32 base_b_rev; /* rev from base board i2c */ - /* cpu board info */ - u32 cpu_b_rev; /* rev from cpu board i2c */ - u32 cpu_b_mux; /* mux type on daughter board */ - u32 cpu_b_ddr_type; /* mem type */ - u32 cpu_b_ddr_speed; /* ddr speed rating */ - u32 cpu_b_switches; /* boot ctrl switch settings */ - /* cpu info */ - u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ - u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ -} h4_sys_data; - -#define XDR_POP 5 /* package on package part */ -#define SDR_DISCRETE 4 /* 128M memory SDR module*/ -#define DDR_STACKED 3 /* stacked part on 2422 */ -#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ -#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ - -#define DDR_100 100 /* type found on most mem d-boards */ -#define DDR_111 111 /* some combo parts */ -#define DDR_133 133 /* most combo, some mem d-boards */ -#define DDR_165 165 /* future parts */ - -#define CPU_2420 0x2420 -#define CPU_2422 0x2422 /* 2420 + 64M stacked */ -#define CPU_2423 0x2423 /* 2420 + 96M stacked */ - -#define CPU_2422_ES1 1 -#define CPU_2422_ES2 2 -#define CPU_2420_ES1 1 -#define CPU_2420_ES2 2 -#define CPU_2420_2422_ES1 1 - -#define CPU_2420_CHIPID 0x0B5D9000 -#define CPU_24XX_ID_MASK 0x0FFFF000 -#define CPU_242X_REV_MASK 0xF0000000 -#define CPU_242X_PID_MASK 0x000F0000 - -#define BOARD_H4_MENELAUS 1 -#define BOARD_H4_SDP 2 - -#define GPMC_MUXED 1 -#define GPMC_NONMUXED 0 - -#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ -#define TYPE_NOR 0x000 - -#define WIDTH_8BIT 0x0000 -#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ - -#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ - -#endif diff --git a/include/asm-arm/arch-arm1136/sys_proto.h b/include/asm-arm/arch-arm1136/sys_proto.h deleted file mode 100644 index 9d8e5b2622..0000000000 --- a/include/asm-arm/arch-arm1136/sys_proto.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_SYS_PROTO_H_ -#define _OMAP24XX_SYS_PROTO_H_ - -void prcm_init(void); -void memif_init(void); -void sdrc_init(void); -void do_sdrc_init(u32,u32); -void gpmc_init(void); - -void ether_init(void); -void watchdog_init(void); -void set_muxconf_regs(void); -void peripheral_enable(void); - -u32 get_cpu_type(void); -u32 get_cpu_rev(void); -u32 get_mem_type(void); -u32 get_sysboot_value(void); -u32 get_gpmc0_base(void); -u32 is_gpmc_muxed(void); -u32 get_gpmc0_type(void); -u32 get_gpmc0_width(void); -u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound); -u32 get_board_type(void); -void display_board_info(u32); -void update_mux(u32,u32); -u32 get_sdr_cs_size(u32 offset); - -u32 running_in_sdram(void); -u32 running_in_sram(void); -u32 running_in_flash(void); -u32 running_from_internal_boot(void); -u32 get_device_type(void); -#endif diff --git a/include/asm-arm/arch-omap24xx/bits.h b/include/asm-arm/arch-omap24xx/bits.h new file mode 100644 index 0000000000..8522335bfc --- /dev/null +++ b/include/asm-arm/arch-omap24xx/bits.h @@ -0,0 +1,48 @@ +/* bits.h + * Copyright (c) 2004 Texas Instruments + * + * This package is free software; you can redistribute it and/or + * modify it under the terms of the license found in the file + * named COPYING that should have accompanied this file. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ +#ifndef __bits_h +#define __bits_h 1 + +#define BIT0 (1<<0) +#define BIT1 (1<<1) +#define BIT2 (1<<2) +#define BIT3 (1<<3) +#define BIT4 (1<<4) +#define BIT5 (1<<5) +#define BIT6 (1<<6) +#define BIT7 (1<<7) +#define BIT8 (1<<8) +#define BIT9 (1<<9) +#define BIT10 (1<<10) +#define BIT11 (1<<11) +#define BIT12 (1<<12) +#define BIT13 (1<<13) +#define BIT14 (1<<14) +#define BIT15 (1<<15) +#define BIT16 (1<<16) +#define BIT17 (1<<17) +#define BIT18 (1<<18) +#define BIT19 (1<<19) +#define BIT20 (1<<20) +#define BIT21 (1<<21) +#define BIT22 (1<<22) +#define BIT23 (1<<23) +#define BIT24 (1<<24) +#define BIT25 (1<<25) +#define BIT26 (1<<26) +#define BIT27 (1<<27) +#define BIT28 (1<<28) +#define BIT29 (1<<29) +#define BIT30 (1<<30) +#define BIT31 (1<<31) + +#endif diff --git a/include/asm-arm/arch-omap24xx/clocks.h b/include/asm-arm/arch-omap24xx/clocks.h new file mode 100644 index 0000000000..2a95af1810 --- /dev/null +++ b/include/asm-arm/arch-omap24xx/clocks.h @@ -0,0 +1,112 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP24XX_CLOCKS_H_ +#define _OMAP24XX_CLOCKS_H_ + +#define COMMIT_DIVIDERS 0x1 + +#define MODE_BYPASS_FAST 0x2 +#define APLL_LOCK 0xc +#ifdef CONFIG_APTIX +#define DPLL_LOCK 0x1 /* stay in bypass mode */ +#else +#define DPLL_LOCK 0x3 /* DPLL lock */ +#endif + +/****************************************************************************; +; PRCM Scheme II +; +; Enable clocks and DPLL for: +; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50 +; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] +; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0] +; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0] +; DSPI=100 6 CM_CLKSEL_DSP[6:5] +; DSP_S bypass CM_CLKSEL_DSP[7] +; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8] +; IVAF=100 auto +; IVAI auto +; IVA_MPU auto +; IVA_S bypass CM_CLKSEL_DSP[13] +; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0] +; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20] +; SSI_SSTF=100 auto +; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0] +; L4=100Mhz 6 +; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5] +***************************************************************************/ +#define II_DPLL_OUT_X2 0x2 /* x2 core out */ +#define II_MPU_DIV 0x2 /* mpu = core/2 */ +#define II_DSP_DIV 0x343 /* dsp & iva divider */ +#define II_GFX_DIV 0x2 +#define II_BUS_DIV 0x04601026 +#define II_DPLL_300 0x01832100 + +/****************************************************************************; +; PRCM Scheme III +; +; Enable clocks and DPLL for: +; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266 +; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] +; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0] +; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0] +; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5] +; DSP_S ACTIVATED CM_CLKSEL_DSP[7] +; IVAF=88.67 (dsp domain) /3 CM_CLKSEL_DSP[12:8] +; IVAF=88.67 auto +; IVAI auto +; IVA_MPU auto +; IVA_S ACTIVATED CM_CLKSEL_DSP[13] +; GFXF=66.5 (gfx domain) /8 CM_CLKSEL_FGX[2:0]: +; SSI_SSRF=177.3 /3 CM_CLKSEL1_CORE[24:20] +; SSI_SSTF=88.67 auto +; L3=133Mhz (sdram) /4 CM_CLKSEL1_CORE[4:0] +; L4=66.5Mhz /8 +; C_L4_USB=33.25 /16 CM_CLKSEL1_CORE[6:5] +***************************************************************************/ +#define III_DPLL_OUT_X2 0x2 /* x2 core out */ +#define III_MPU_DIV 0x2 /* mpu = core/2 */ +#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/ +#define III_GFX_DIV 0x2 +#define III_BUS_DIV 0x08301044 +#define III_DPLL_266 0x01885500 + +/* set defaults for boot up */ +#ifdef PRCM_CONFIG_II +# define DPLL_OUT II_DPLL_OUT_X2 +# define MPU_DIV II_MPU_DIV +# define DSP_DIV II_DSP_DIV +# define GFX_DIV II_GFX_DIV +# define BUS_DIV II_BUS_DIV +# define DPLL_VAL II_DPLL_300 +#elif PRCM_CONFIG_III +# define DPLL_OUT III_DPLL_OUT_X2 +# define MPU_DIV III_MPU_DIV +# define DSP_DIV III_DSP_DIV +# define GFX_DIV III_GFX_DIV +# define BUS_DIV III_BUS_DIV +# define DPLL_VAL III_DPLL_266 +#endif + +/* lock delay time out */ +#define LDELAY 12000000 + +#endif diff --git a/include/asm-arm/arch-omap24xx/i2c.h b/include/asm-arm/arch-omap24xx/i2c.h new file mode 100644 index 0000000000..7248950e52 --- /dev/null +++ b/include/asm-arm/arch-omap24xx/i2c.h @@ -0,0 +1,107 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP24XX_I2C_H_ +#define _OMAP24XX_I2C_H_ + +#define I2C_BASE 0x48070000 +#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */ + +#define I2C_REV (I2C_BASE + 0x00) +#define I2C_IE (I2C_BASE + 0x04) +#define I2C_STAT (I2C_BASE + 0x08) +#define I2C_IV (I2C_BASE + 0x0c) +#define I2C_BUF (I2C_BASE + 0x14) +#define I2C_CNT (I2C_BASE + 0x18) +#define I2C_DATA (I2C_BASE + 0x1c) +#define I2C_SYSC (I2C_BASE + 0x20) +#define I2C_CON (I2C_BASE + 0x24) +#define I2C_OA (I2C_BASE + 0x28) +#define I2C_SA (I2C_BASE + 0x2c) +#define I2C_PSC (I2C_BASE + 0x30) +#define I2C_SCLL (I2C_BASE + 0x34) +#define I2C_SCLH (I2C_BASE + 0x38) +#define I2C_SYSTEST (I2C_BASE + 0x3c) + +/* I2C masks */ + +/* I2C Interrupt Enable Register (I2C_IE): */ +#define I2C_IE_GC_IE (1 << 5) +#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ +#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ +#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ +#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Status Register (I2C_STAT): */ + +#define I2C_STAT_SBD (1 << 15) /* Single byte data */ +#define I2C_STAT_BB (1 << 12) /* Bus busy */ +#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ +#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ +#define I2C_STAT_AAS (1 << 9) /* Address as slave */ +#define I2C_STAT_GC (1 << 5) +#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ +#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ +#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ +#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ + + +/* I2C Interrupt Code Register (I2C_INTCODE): */ + +#define I2C_INTCODE_MASK 7 +#define I2C_INTCODE_NONE 0 +#define I2C_INTCODE_AL 1 /* Arbitration lost */ +#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ +#define I2C_INTCODE_ARDY 3 /* Register access ready */ +#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ +#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ + +/* I2C Buffer Configuration Register (I2C_BUF): */ + +#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ +#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ + +/* I2C Configuration Register (I2C_CON): */ + +#define I2C_CON_EN (1 << 15) /* I2C module enable */ +#define I2C_CON_BE (1 << 14) /* Big endian mode */ +#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ +#define I2C_CON_MST (1 << 10) /* Master/slave mode */ +#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */ +#define I2C_CON_XA (1 << 8) /* Expand address */ +#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ +#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ + +/* I2C System Test Register (I2C_SYSTEST): */ + +#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ +#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */ +#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ +#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ +#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ +#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ +#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ +#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ + +#endif diff --git a/include/asm-arm/arch-omap24xx/mem.h b/include/asm-arm/arch-omap24xx/mem.h new file mode 100644 index 0000000000..c81f1c4370 --- /dev/null +++ b/include/asm-arm/arch-omap24xx/mem.h @@ -0,0 +1,156 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP24XX_MEM_H_ +#define _OMAP24XX_MEM_H_ + +#define SDRC_CS0_OSET 0x0 +#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ + +#ifndef __ASSEMBLY__ +/* struct's for holding data tables for current boards, they are getting used + early in init when NO global access are there */ +struct sdrc_data_s { + u32 sdrc_sharing; + u32 sdrc_mdcfg_0_ddr; + u32 sdrc_mdcfg_0_sdr; + u32 sdrc_actim_ctrla_0; + u32 sdrc_actim_ctrlb_0; + u32 sdrc_rfr_ctrl; + u32 sdrc_mr_0_ddr; + u32 sdrc_mr_0_sdr; + u32 sdrc_dllab_ctrl; +} /*__attribute__ ((packed))*/; +typedef struct sdrc_data_s sdrc_data_t; + +typedef enum { + STACKED = 0, + IP_DDR = 1, + COMBO_DDR = 2, + IP_SDR = 3, +} mem_t; + +#endif + +/* Slower full frequency range default timings for x32 operation*/ +#define H4_2420_SDRC_SHARING 0x00000100 +#define H4_2420_SDRC_MDCFG_0_SDR 0x00D04010 /* discrete sdr module */ +#define H4_2420_SDRC_MR_0_SDR 0x00000031 +#define H4_2420_SDRC_MDCFG_0_DDR 0x01702011 /* descrite ddr module */ +#define H4_2420_COMBO_MDCFG_0_DDR 0x00801011 /* combo module */ +#define H4_2420_SDRC_MR_0_DDR 0x00000032 + +#define H4_2422_SDRC_SHARING 0x00004b00 +#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked ddr on 2422 */ +#define H4_2422_SDRC_MR_0_DDR 0x00000032 + +/* ES1 work around timings */ +#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1 0x9bead909 /* 165Mhz for use with 100/133 */ +#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020 +#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */ + +/* optimized timings good for current shipping parts */ +#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485 +#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e +#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */ +#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */ +#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01 +#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01 +#define H4_242x_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/ +#define H4_242x_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 72deg, for ES2 */ + +#ifdef PRCM_CONFIG_II +# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz +# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz +# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz +# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz +# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz +# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz +# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz +# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz +#elif PRCM_CONFIG_III +# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz +# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz +# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz +# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_133MHz +# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz +# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz +# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz +# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz +#endif + + +/* GPMC settings */ +#ifdef PRCM_CONFIG_II /* L3 at 100MHz */ +# ifdef CFG_NAND_BOOT +# define H4_24XX_GPMC_CONFIG1_0 0x0 +# define H4_24XX_GPMC_CONFIG2_0 0x00141400 +# define H4_24XX_GPMC_CONFIG3_0 0x00141400 +# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 +# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 +# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 +# else /* else NOR */ +# define H4_24XX_GPMC_CONFIG1_0 0x3 +# define H4_24XX_GPMC_CONFIG2_0 0x000f0f01 +# define H4_24XX_GPMC_CONFIG3_0 0x00050502 +# define H4_24XX_GPMC_CONFIG4_0 0x0C060C06 +# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F +# endif /* endif CFG_NAND_BOOT */ +# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) +# define H4_24XX_GPMC_CONFIG1_1 0x00011000 +# define H4_24XX_GPMC_CONFIG2_1 0x001F1F00 +# define H4_24XX_GPMC_CONFIG3_1 0x00080802 +# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 +# define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F +# define H4_24XX_GPMC_CONFIG6_1 0x000003C2 +# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) +#endif /* endif PRCM_CONFIG_II */ + +#ifdef PRCM_CONFIG_III /* L3 at 133MHz */ +# ifdef CFG_NAND_BOOT +# define H4_24XX_GPMC_CONFIG1_0 0x0 +# define H4_24XX_GPMC_CONFIG2_0 0x00141400 +# define H4_24XX_GPMC_CONFIG3_0 0x00141400 +# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 +# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 +# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 +# else /* NOR boot */ +# define H4_24XX_GPMC_CONFIG1_0 0x3 +# define H4_24XX_GPMC_CONFIG2_0 0x00151501 +# define H4_24XX_GPMC_CONFIG3_0 0x00060602 +# define H4_24XX_GPMC_CONFIG4_0 0x10081008 +# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F +# define H4_24XX_GPMC_CONFIG6_0 0x000004c4 +# endif /* endif CFG_NAND_BOOT */ +# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) +# define H4_24XX_GPMC_CONFIG1_1 0x00011000 +# define H4_24XX_GPMC_CONFIG2_1 0x001f1f01 +# define H4_24XX_GPMC_CONFIG3_1 0x00080803 +# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 +# define H4_24XX_GPMC_CONFIG5_1 0x041f1F1F +# define H4_24XX_GPMC_CONFIG6_1 0x000004C4 +# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) +#endif /* endif CFG_PRCM_III */ + +#endif /* endif _OMAP24XX_MEM_H_ */ diff --git a/include/asm-arm/arch-omap24xx/mux.h b/include/asm-arm/arch-omap24xx/mux.h new file mode 100644 index 0000000000..4fdb9c635f --- /dev/null +++ b/include/asm-arm/arch-omap24xx/mux.h @@ -0,0 +1,176 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP2420_MUX_H_ +#define _OMAP2420_MUX_H_ + +#ifndef __ASSEMBLY__ +typedef unsigned char uint8; +typedef unsigned int uint32; + +void muxSetupSDRC(void); +void muxSetupGPMC(void); +void muxSetupUsb0(void); +void muxSetupUsbHost(void); +void muxSetupUart3(void); +void muxSetupI2C1(void); +void muxSetupUART1(void); +void muxSetupLCD(void); +void muxSetupCamera(void); +void muxSetupMMCSD(void) ; +void muxSetupTouchScreen(void) ; +void muxSetupHDQ(void); +#endif + +#define USB_OTG_CTRL ((volatile uint32 *)0x4805E30C) + +/* Pin Muxing registers used for HDQ (Smart battery) */ +#define CONTROL_PADCONF_HDQ_SIO ((volatile unsigned char *)0x48000115) + +/* Pin Muxing registers used for GPMC */ +#define CONTROL_PADCONF_GPMC_D2_BYTE0 ((volatile unsigned char *)0x48000088) +#define CONTROL_PADCONF_GPMC_D2_BYTE1 ((volatile unsigned char *)0x48000089) +#define CONTROL_PADCONF_GPMC_D2_BYTE2 ((volatile unsigned char *)0x4800008A) +#define CONTROL_PADCONF_GPMC_D2_BYTE3 ((volatile unsigned char *)0x4800008B) + +#define CONTROL_PADCONF_GPMC_NCS0_BYTE0 ((volatile unsigned char *)0x4800008C) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE4 (0x48000090) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE5 (0x48000091) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE6 (0x48000092) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE7 (0x48000093) + +/* Pin Muxing registers used for SDRC */ +#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0) +#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1) +#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2) +#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3) + +#define CONTROL_PADCONF_SDRC_A14_BYTE0 ((volatile unsigned char *)0x48000030) +#define CONTROL_PADCONF_SDRC_A14_BYTE1 ((volatile unsigned char *)0x48000031) +#define CONTROL_PADCONF_SDRC_A14_BYTE2 ((volatile unsigned char *)0x48000032) +#define CONTROL_PADCONF_SDRC_A14_BYTE3 ((volatile unsigned char *)0x48000033) + +/* Pin Muxing registers used for Touch Screen (SPI) */ +#define CONTROL_PADCONF_SPI1_CLK ((volatile unsigned char *)0x480000FF) +#define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100) +#define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101) +#define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102) +#define CONTROL_PADCONF_SPI1_NCS1 (0x48000103) + +#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B) + +/* Pin Muxing registers used for MMCSD */ +#define CONTROL_PADCONF_MMC_CLKI ((volatile unsigned char *)0x480000FE) +#define CONTROL_PADCONF_MMC_CLKO ((volatile unsigned char *)0x480000F3) +#define CONTROL_PADCONF_MMC_CMD ((volatile unsigned char *)0x480000F4) +#define CONTROL_PADCONF_MMC_DAT0 ((volatile unsigned char *)0x480000F5) +#define CONTROL_PADCONF_MMC_DAT1 ((volatile unsigned char *)0x480000F6) +#define CONTROL_PADCONF_MMC_DAT2 ((volatile unsigned char *)0x480000F7) +#define CONTROL_PADCONF_MMC_DAT3 ((volatile unsigned char *)0x480000F8) +#define CONTROL_PADCONF_MMC_DAT_DIR0 ((volatile unsigned char *)0x480000F9) +#define CONTROL_PADCONF_MMC_DAT_DIR1 ((volatile unsigned char *)0x480000FA) +#define CONTROL_PADCONF_MMC_DAT_DIR2 ((volatile unsigned char *)0x480000FB) +#define CONTROL_PADCONF_MMC_DAT_DIR3 ((volatile unsigned char *)0x480000FC) +#define CONTROL_PADCONF_MMC_CMD_DIR ((volatile unsigned char *)0x480000FD) + +#define CONTROL_PADCONF_SDRC_A14 ((volatile unsigned char *)0x48000030) +#define CONTROL_PADCONF_SDRC_A13 ((volatile unsigned char *)0x48000031) + +/* Pin Muxing registers used for CAMERA */ +#define CONTROL_PADCONF_SYS_NRESWARM ((volatile unsigned char *)0x4800012B) + +#define CONTROL_PADCONF_CAM_XCLK ((volatile unsigned char *)0x480000DC) +#define CONTROL_PADCONF_CAM_LCLK ((volatile unsigned char *)0x480000DB) +#define CONTROL_PADCONF_CAM_VS ((volatile unsigned char *)0x480000DA) +#define CONTROL_PADCONF_CAM_HS ((volatile unsigned char *)0x480000D9) +#define CONTROL_PADCONF_CAM_D0 ((volatile unsigned char *)0x480000D8) +#define CONTROL_PADCONF_CAM_D1 ((volatile unsigned char *)0x480000D7) +#define CONTROL_PADCONF_CAM_D2 ((volatile unsigned char *)0x480000D6) +#define CONTROL_PADCONF_CAM_D3 ((volatile unsigned char *)0x480000D5) +#define CONTROL_PADCONF_CAM_D4 ((volatile unsigned char *)0x480000D4) +#define CONTROL_PADCONF_CAM_D5 ((volatile unsigned char *)0x480000D3) +#define CONTROL_PADCONF_CAM_D6 ((volatile unsigned char *)0x480000D2) +#define CONTROL_PADCONF_CAM_D7 ((volatile unsigned char *)0x480000D1) +#define CONTROL_PADCONF_CAM_D8 ((volatile unsigned char *)0x480000D0) +#define CONTROL_PADCONF_CAM_D9 ((volatile unsigned char *)0x480000CF) + +/* Pin Muxing registers used for LCD */ +#define CONTROL_PADCONF_DSS_D0 ((volatile unsigned char *)0x480000B3) +#define CONTROL_PADCONF_DSS_D1 ((volatile unsigned char *)0x480000B4) +#define CONTROL_PADCONF_DSS_D2 ((volatile unsigned char *)0x480000B5) +#define CONTROL_PADCONF_DSS_D3 ((volatile unsigned char *)0x480000B6) +#define CONTROL_PADCONF_DSS_D4 ((volatile unsigned char *)0x480000B7) +#define CONTROL_PADCONF_DSS_D5 ((volatile unsigned char *)0x480000B8) +#define CONTROL_PADCONF_DSS_D6 ((volatile unsigned char *)0x480000B9) +#define CONTROL_PADCONF_DSS_D7 ((volatile unsigned char *)0x480000BA) +#define CONTROL_PADCONF_DSS_D8 ((volatile unsigned char *)0x480000BB) +#define CONTROL_PADCONF_DSS_D9 ((volatile unsigned char *)0x480000BC) +#define CONTROL_PADCONF_DSS_D10 ((volatile unsigned char *)0x480000BD) +#define CONTROL_PADCONF_DSS_D11 ((volatile unsigned char *)0x480000BE) +#define CONTROL_PADCONF_DSS_D12 ((volatile unsigned char *)0x480000BF) +#define CONTROL_PADCONF_DSS_D13 ((volatile unsigned char *)0x480000C0) +#define CONTROL_PADCONF_DSS_D14 ((volatile unsigned char *)0x480000C1) +#define CONTROL_PADCONF_DSS_D15 ((volatile unsigned char *)0x480000C2) +#define CONTROL_PADCONF_DSS_D16 ((volatile unsigned char *)0x480000C3) +#define CONTROL_PADCONF_DSS_D17 ((volatile unsigned char *)0x480000C4) +#define CONTROL_PADCONF_DSS_PCLK ((volatile unsigned char *)0x480000CB) +#define CONTROL_PADCONF_DSS_VSYNC ((volatile unsigned char *)0x480000CC) +#define CONTROL_PADCONF_DSS_HSYNC ((volatile unsigned char *)0x480000CD) +#define CONTROL_PADCONF_DSS_ACBIAS ((volatile unsigned char *)0x480000CE) + +/* Pin Muxing registers used for UART1 */ +#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5) +#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6) +#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7) +#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8) + +/* Pin Muxing registers used for I2C1 */ +#define CONTROL_PADCONF_I2C1_SCL ((volatile unsigned char *)0x48000111) +#define CONTROL_PADCONF_I2C1_SDA ((volatile unsigned char *)0x48000112) + +/* Pin Muxing registres used for USB0. */ +#define CONTROL_PADCONF_USB0_PUEN ((volatile uint8 *)0x4800011D) +#define CONTROL_PADCONF_USB0_VP ((volatile uint8 *)0x4800011E) +#define CONTROL_PADCONF_USB0_VM ((volatile uint8 *)0x4800011F) +#define CONTROL_PADCONF_USB0_RCV ((volatile uint8 *)0x48000120) +#define CONTROL_PADCONF_USB0_TXEN ((volatile uint8 *)0x48000121) +#define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122) +#define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123) + +/* Pin Muxing registres used for USB1. */ +#define CONTROL_PADCONF_USB1_RCV (0x480000EB) +#define CONTROL_PADCONF_USB1_TXEN (0x480000EC) + +/* Pin Muxing registers used for UART3/IRDA */ +#define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118) +#define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119) + +/* Pin Muxing registers used for GPIO */ +#define CONTROL_PADCONF_GPIO69 (0x480000ED) +#define CONTROL_PADCONF_GPIO70 (0x480000EE) +#define CONTROL_PADCONF_GPIO102 (0x48000116) +#define CONTROL_PADCONF_GPIO103 (0x48000117) +#define CONTROL_PADCONF_GPIO104 (0x48000118) +#define CONTROL_PADCONF_GPIO105 (0x48000119) + +#endif diff --git a/include/asm-arm/arch-omap24xx/omap2420.h b/include/asm-arm/arch-omap24xx/omap2420.h new file mode 100644 index 0000000000..0c11beccf6 --- /dev/null +++ b/include/asm-arm/arch-omap24xx/omap2420.h @@ -0,0 +1,246 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP2420_SYS_H_ +#define _OMAP2420_SYS_H_ + +#include + +/* + * 2420 specific Section + */ + +/* L3 Firewall */ +#define A_REQINFOPERM0 0x68005048 +#define A_READPERM0 0x68005050 +#define A_WRITEPERM0 0x68005058 +/* #define GP_DEVICE (BIT8|BIT9) FIXME -- commented out to make compile -- FIXME */ + +/* L3 Firewall */ +#define A_REQINFOPERM0 0x68005048 +#define A_READPERM0 0x68005050 +#define A_WRITEPERM0 0x68005058 + +/* CONTROL */ +#define OMAP2420_CTRL_BASE (0x48000000) +#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) + +/* device type */ +#define TST_DEVICE 0x0 +#define EMU_DEVICE 0x1 +#define HS_DEVICE 0x2 +#define GP_DEVICE 0x3 + +/* TAP information */ +#define OMAP2420_TAP_BASE (0x48014000) +#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) +#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208) + +/* GPMC */ +#define OMAP2420_GPMC_BASE (0x6800A000) +#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) +#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) +#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) +#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) +#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) +#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) +#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) +#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) +#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) +#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) +#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) +#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) +#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) +#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) +#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) +#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) +#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) +#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) +#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0) +#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4) +#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8) +#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC) +#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0) +#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4) +#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8) +#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0) +#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4) +#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8) +#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC) +#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100) +#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104) +#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108) + +/* SMS */ +#define OMAP2420_SMS_BASE 0x68008000 +#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) +#define SMS_CLASS_ARB0 (OMAP2420_SMS_BASE+0xD0) +# define BURSTCOMPLETE_GROUP7 BIT31 + +/* SDRC */ +#define OMAP2420_SDRC_BASE 0x68009000 +#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) +#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) +#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40) +#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) +#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) +#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) +#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) +#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) +#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) +#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) +#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) +#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) +#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) +#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) +#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) +#define OMAP2420_SDRC_CS0 0x80000000 +#define OMAP2420_SDRC_CS1 0xA0000000 +#define CMD_NOP 0x0 +#define CMD_PRECHARGE 0x1 +#define CMD_AUTOREFRESH 0x2 +#define CMD_ENTR_PWRDOWN 0x3 +#define CMD_EXIT_PWRDOWN 0x4 +#define CMD_ENTR_SRFRSH 0x5 +#define CMD_CKE_HIGH 0x6 +#define CMD_CKE_LOW 0x7 +#define SOFTRESET BIT1 +#define SMART_IDLE (0x2 << 3) +#define REF_ON_IDLE (0x1 << 6) + + +/* UART */ +#define OMAP2420_UART1 0x4806A000 +#define OMAP2420_UART2 0x4806C000 +#define OMAP2420_UART3 0x4806E000 + +/* General Purpose Timers */ +#define OMAP2420_GPT1 0x48028000 +#define OMAP2420_GPT2 0x4802A000 +#define OMAP2420_GPT3 0x48078000 +#define OMAP2420_GPT4 0x4807A000 +#define OMAP2420_GPT5 0x4807C000 +#define OMAP2420_GPT6 0x4807E000 +#define OMAP2420_GPT7 0x48080000 +#define OMAP2420_GPT8 0x48082000 +#define OMAP2420_GPT9 0x48084000 +#define OMAP2420_GPT10 0x48086000 +#define OMAP2420_GPT11 0x48088000 +#define OMAP2420_GPT12 0x4808A000 + +/* timer regs offsets (32 bit regs) */ +#define TIDR 0x0 /* r */ +#define TIOCP_CFG 0x10 /* rw */ +#define TISTAT 0x14 /* r */ +#define TISR 0x18 /* rw */ +#define TIER 0x1C /* rw */ +#define TWER 0x20 /* rw */ +#define TCLR 0x24 /* rw */ +#define TCRR 0x28 /* rw */ +#define TLDR 0x2C /* rw */ +#define TTGR 0x30 /* rw */ +#define TWPS 0x34 /* r */ +#define TMAR 0x38 /* rw */ +#define TCAR1 0x3c /* r */ +#define TSICR 0x40 /* rw */ +#define TCAR2 0x44 /* r */ + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE 0x48020000 +#define WD2_BASE 0x48022000 +#define WD3_BASE 0x48024000 +#define WD4_BASE 0x48026000 +#define WWPS 0x34 /* r */ +#define WSPR 0x48 /* rw */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* PRCM */ +#define OMAP2420_CM_BASE 0x48008000 +#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) +#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) +#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) +#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) +#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) +#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) +#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) +#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) +#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) +#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) +#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) +#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) +#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) +#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) +#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) +#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) + +/* + * H4 specific Section + */ + +/* + * The 2420's chip selects are programmable. The mask ROM + * does configure CS0 to 0x08000000 before dispatch. So, if + * you want your code to live below that address, you have to + * be prepared to jump though hoops, to reset the base address. + */ +#if defined(CONFIG_OMAP2420H4) +/* GPMC */ +#ifdef CONFIG_VIRTIO_A /* Pre version B */ +# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ +# define H4_CS1_BASE 0x04000000 /* debug board */ +# define H4_CS2_BASE 0x0A000000 /* wifi board */ +#else +# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */ +# define H4_CS1_BASE 0x08000000 /* debug board */ +# define H4_CS2_BASE 0x0A000000 /* wifi board */ +#endif + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) + +/* FPGA on Debug board.*/ +#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) +#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) +#endif /* endif CONFIG_2420H4 */ + +#if defined(CONFIG_APOLLON) +#define APOLLON_CS0_BASE 0x00000000 /* OneNAND */ +#define APOLLON_CS1_BASE 0x08000000 /* ethernet */ +#define APOLLON_CS2_BASE 0x10000000 /* OneNAND */ +#define APOLLON_CS3_BASE 0x18000000 /* NOR */ + +#define ETH_CONTROL_REG (APOLLON_CS1_BASE + 0x30b) +#define LAN_RESET_REGISTER (APOLLON_CS1_BASE + 0x1c) +#endif /* endif CONFIG_APOLLON */ + +/* Common */ +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +#define PERIFERAL_PORT_BASE 0x480FE003 + +#endif diff --git a/include/asm-arm/arch-omap24xx/sizes.h b/include/asm-arm/arch-omap24xx/sizes.h new file mode 100644 index 0000000000..aaba18f150 --- /dev/null +++ b/include/asm-arm/arch-omap24xx/sizes.h @@ -0,0 +1,49 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* Size defintions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_32K 0x00008000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_31M 0x01F00000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif /* __sizes_h */ diff --git a/include/asm-arm/arch-omap24xx/sys_info.h b/include/asm-arm/arch-omap24xx/sys_info.h new file mode 100644 index 0000000000..53c231a5e4 --- /dev/null +++ b/include/asm-arm/arch-omap24xx/sys_info.h @@ -0,0 +1,82 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP24XX_SYS_INFO_H_ +#define _OMAP24XX_SYS_INFO_H_ + +typedef struct h4_system_data { + /* base board info */ + u32 base_b_rev; /* rev from base board i2c */ + /* cpu board info */ + u32 cpu_b_rev; /* rev from cpu board i2c */ + u32 cpu_b_mux; /* mux type on daughter board */ + u32 cpu_b_ddr_type; /* mem type */ + u32 cpu_b_ddr_speed; /* ddr speed rating */ + u32 cpu_b_switches; /* boot ctrl switch settings */ + /* cpu info */ + u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ + u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ +} h4_sys_data; + +#define XDR_POP 5 /* package on package part */ +#define SDR_DISCRETE 4 /* 128M memory SDR module*/ +#define DDR_STACKED 3 /* stacked part on 2422 */ +#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ +#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ + +#define DDR_100 100 /* type found on most mem d-boards */ +#define DDR_111 111 /* some combo parts */ +#define DDR_133 133 /* most combo, some mem d-boards */ +#define DDR_165 165 /* future parts */ + +#define CPU_2420 0x2420 +#define CPU_2422 0x2422 /* 2420 + 64M stacked */ +#define CPU_2423 0x2423 /* 2420 + 96M stacked */ + +#define CPU_2422_ES1 1 +#define CPU_2422_ES2 2 +#define CPU_2420_ES1 1 +#define CPU_2420_ES2 2 +#define CPU_2420_2422_ES1 1 + +#define CPU_2420_CHIPID 0x0B5D9000 +#define CPU_24XX_ID_MASK 0x0FFFF000 +#define CPU_242X_REV_MASK 0xF0000000 +#define CPU_242X_PID_MASK 0x000F0000 + +#define BOARD_H4_MENELAUS 1 +#define BOARD_H4_SDP 2 + +#define GPMC_MUXED 1 +#define GPMC_NONMUXED 0 + +#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ +#define TYPE_NOR 0x000 + +#define WIDTH_8BIT 0x0000 +#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ + +#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ + +#endif diff --git a/include/asm-arm/arch-omap24xx/sys_proto.h b/include/asm-arm/arch-omap24xx/sys_proto.h new file mode 100644 index 0000000000..9d8e5b2622 --- /dev/null +++ b/include/asm-arm/arch-omap24xx/sys_proto.h @@ -0,0 +1,54 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP24XX_SYS_PROTO_H_ +#define _OMAP24XX_SYS_PROTO_H_ + +void prcm_init(void); +void memif_init(void); +void sdrc_init(void); +void do_sdrc_init(u32,u32); +void gpmc_init(void); + +void ether_init(void); +void watchdog_init(void); +void set_muxconf_regs(void); +void peripheral_enable(void); + +u32 get_cpu_type(void); +u32 get_cpu_rev(void); +u32 get_mem_type(void); +u32 get_sysboot_value(void); +u32 get_gpmc0_base(void); +u32 is_gpmc_muxed(void); +u32 get_gpmc0_type(void); +u32 get_gpmc0_width(void); +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound); +u32 get_board_type(void); +void display_board_info(u32); +void update_mux(u32,u32); +u32 get_sdr_cs_size(u32 offset); + +u32 running_in_sdram(void); +u32 running_in_sram(void); +u32 running_in_flash(void); +u32 running_from_internal_boot(void); +u32 get_device_type(void); +#endif