From: Lokesh Vutla Date: Fri, 29 Dec 2017 06:17:50 +0000 (+0530) Subject: cmd: ti: Generalize cmd_ddr3 command X-Git-Tag: v2018.03-rc1~153 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=8a8af8a2fd5cbe98b5680ba6822fe38686b6bdb6;p=oweals%2Fu-boot.git cmd: ti: Generalize cmd_ddr3 command Keystone and DRA7 based TI platforms uses same EMIF memory controller. cmd_ddr3 command is customized for keystone platforms, make it generic so that it can be re used for DRA7 platforms. Signed-off-by: Lokesh Vutla --- diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index 1924f041d2..dc398efd32 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -17,7 +17,9 @@ #include /* Base address */ +#ifndef EMIF1_BASE #define EMIF1_BASE 0x4c000000 +#endif #define EMIF2_BASE 0x4d000000 #define EMIF_4D 0x4 diff --git a/arch/arm/mach-keystone/include/mach/hardware.h b/arch/arm/mach-keystone/include/mach/hardware.h index cf6e176228..5d08418eb9 100644 --- a/arch/arm/mach-keystone/include/mach/hardware.h +++ b/arch/arm/mach-keystone/include/mach/hardware.h @@ -78,6 +78,7 @@ typedef volatile unsigned int *dv_reg_p; #define KS2_DDR3A_EMIF_CTRL_BASE 0x21010000 #define KS2_DDR3A_EMIF_DATA_BASE 0x80000000 #define KS2_DDR3A_DDRPHYC 0x02329000 +#define EMIF1_BASE KS2_DDR3A_EMIF_CTRL_BASE #define KS2_DDR3_MIDR_OFFSET 0x00 #define KS2_DDR3_STATUS_OFFSET 0x04 diff --git a/cmd/ti/ddr3.c b/cmd/ti/ddr3.c index b6435a43f4..664bb5ff55 100644 --- a/cmd/ti/ddr3.c +++ b/cmd/ti/ddr3.c @@ -7,12 +7,15 @@ */ #include -#include +#include +#include #include #include DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_ARCH_KEYSTONE +#include #define DDR_MIN_ADDR CONFIG_SYS_SDRAM_BASE #define STACKSIZE (512 << 10) /* 512 KiB */ @@ -21,6 +24,7 @@ DECLARE_GLOBAL_DATA_PTR; #define ECC_END_ADDR1 (((gd->start_addr_sp - DDR_REMAP_ADDR - \ STACKSIZE) >> 17) - 2) +#endif #define DDR_TEST_BURST_SIZE 1024 @@ -153,57 +157,143 @@ static int ddr_memory_compare(u32 address1, u32 address2, u32 size) return 0; } -static int ddr_memory_ecc_err(u32 base, u32 address, u32 ecc_err) +static void ddr_check_ecc_status(void) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + u32 err_1b = readl(&emif->emif_1b_ecc_err_cnt); + u32 int_status = readl(&emif->emif_irqstatus_raw_sys); + int ecc_test = 0; + char *env; + + env = env_get("ecc_test"); + if (env) + ecc_test = simple_strtol(env, NULL, 0); + + puts("ECC test Status:\n"); + if (int_status & EMIF_INT_WR_ECC_ERR_SYS_MASK) + puts("\tECC test: DDR ECC write error interrupted\n"); + + if (int_status & EMIF_INT_TWOBIT_ECC_ERR_SYS_MASK) + if (!ecc_test) + panic("\tECC test: DDR ECC 2-bit error interrupted"); + + if (int_status & EMIF_INT_ONEBIT_ECC_ERR_SYS_MASK) + puts("\tECC test: DDR ECC 1-bit error interrupted\n"); + + if (err_1b) + printf("\tECC test: 1-bit ECC err count: 0x%x\n", err_1b); +} + +static int ddr_memory_ecc_err(u32 addr, u32 ecc_err) { - u32 value1, value2, value3; + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + u32 ecc_ctrl = readl(&emif->emif_ecc_ctrl_reg); + u32 val1, val2, val3; + + debug("Disabling D-Cache before ECC test\n"); + dcache_disable(); + invalidate_dcache_all(); - puts("Disabling DDR ECC ...\n"); - ddr3_disable_ecc(base); + puts("Testing DDR ECC:\n"); + puts("\tECC test: Disabling DDR ECC ...\n"); + writel(0, &emif->emif_ecc_ctrl_reg); - value1 = __raw_readl(address); - value2 = value1 ^ ecc_err; - __raw_writel(value2, address); + val1 = readl(addr); + val2 = val1 ^ ecc_err; + writel(val2, addr); - value3 = __raw_readl(address); - printf("ECC err test, addr 0x%x, read data 0x%x, wrote data 0x%x, err pattern: 0x%x, read after write data 0x%x\n", - address, value1, value2, ecc_err, value3); + val3 = readl(addr); + printf("\tECC test: addr 0x%x, read data 0x%x, written data 0x%x, err pattern: 0x%x, read after write data 0x%x\n", + addr, val1, val2, ecc_err, val3); - __raw_writel(ECC_START_ADDR1 | (ECC_END_ADDR1 << 16), - base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET); + puts("\tECC test: Enabling DDR ECC ...\n"); +#ifdef CONFIG_ARCH_KEYSTONE + ecc_ctrl = ECC_START_ADDR1 | (ECC_END_ADDR1 << 16); + writel(ecc_ctrl, EMIF1_BASE + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET); + ddr3_enable_ecc(EMIF1_BASE, 1); +#else + writel(ecc_ctrl, &emif->emif_ecc_ctrl_reg); +#endif - puts("Enabling DDR ECC ...\n"); - ddr3_enable_ecc(base, 1); + val1 = readl(addr); + printf("\tECC test: addr 0x%x, read data 0x%x\n", addr, val1); - value1 = __raw_readl(address); - printf("ECC err test, addr 0x%x, read data 0x%x\n", address, value1); + ddr_check_ecc_status(); + + debug("Enabling D-cache back after ECC test\n"); + enable_caches(); - ddr3_check_ecc_int(base); return 0; } +static int is_addr_valid(u32 addr) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + u32 start_addr, end_addr, range, ecc_ctrl; + +#ifdef CONFIG_ARCH_KEYSTONE + ecc_ctrl = EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK; + range = ECC_START_ADDR1 | (ECC_END_ADDR1 << 16); +#else + ecc_ctrl = readl(&emif->emif_ecc_ctrl_reg); + range = readl(&emif->emif_ecc_address_range_1); +#endif + + /* Check in ecc address range 1 */ + if (ecc_ctrl & EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK) { + start_addr = ((range & EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16) + + CONFIG_SYS_SDRAM_BASE; + end_addr = start_addr + (range & EMIF_ECC_REG_ECC_END_ADDR_MASK) + + 0xFFFF; + if ((addr >= start_addr) && (addr <= end_addr)) + /* addr within ecc address range 1 */ + return 1; + } + + /* Check in ecc address range 2 */ + if (ecc_ctrl & EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_MASK) { + range = readl(&emif->emif_ecc_address_range_2); + start_addr = ((range & EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16) + + CONFIG_SYS_SDRAM_BASE; + end_addr = start_addr + (range & EMIF_ECC_REG_ECC_END_ADDR_MASK) + + 0xFFFF; + if ((addr >= start_addr) && (addr <= end_addr)) + /* addr within ecc address range 2 */ + return 1; + } + + return 0; +} + +static int is_ecc_enabled(void) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + u32 ecc_ctrl = readl(&emif->emif_ecc_ctrl_reg); + + return (ecc_ctrl & EMIF_ECC_CTRL_REG_ECC_EN_MASK) && + (ecc_ctrl & EMIF_ECC_REG_RMW_EN_MASK); +} + static int do_ddr_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { u32 start_addr, end_addr, size, ecc_err; if ((argc == 4) && (strncmp(argv[1], "ecc_err", 8) == 0)) { - if (!ddr3_ecc_support_rmw(KS2_DDR3A_EMIF_CTRL_BASE)) { - puts("ECC RMW isn't supported for this SOC\n"); - return 1; + if (!is_ecc_enabled()) { + puts("ECC not enabled. Please Enable ECC any try again\n"); + return CMD_RET_FAILURE; } start_addr = simple_strtoul(argv[2], NULL, 16); ecc_err = simple_strtoul(argv[3], NULL, 16); - if ((start_addr < CONFIG_SYS_SDRAM_BASE) || - (start_addr > (CONFIG_SYS_SDRAM_BASE + - CONFIG_MAX_RAM_BANK_SIZE - 1))) { - puts("Invalid address!\n"); - return cmd_usage(cmdtp); + if (!is_addr_valid(start_addr)) { + puts("Invalid address. Please enter ECC supported address!\n"); + return CMD_RET_FAILURE; } - ddr_memory_ecc_err(KS2_DDR3A_EMIF_CTRL_BASE, - start_addr, ecc_err); + ddr_memory_ecc_err(start_addr, ecc_err); return 0; } @@ -216,10 +306,10 @@ static int do_ddr_test(cmd_tbl_t *cmdtp, if ((start_addr < CONFIG_SYS_SDRAM_BASE) || (start_addr > (CONFIG_SYS_SDRAM_BASE + - CONFIG_MAX_RAM_BANK_SIZE - 1)) || + get_effective_memsize() - 1)) || (end_addr < CONFIG_SYS_SDRAM_BASE) || (end_addr > (CONFIG_SYS_SDRAM_BASE + - CONFIG_MAX_RAM_BANK_SIZE - 1)) || (start_addr >= end_addr)) { + get_effective_memsize() - 1)) || (start_addr >= end_addr)) { puts("Invalid start or end address!\n"); return cmd_usage(cmdtp); }