From: Timur Tabi Date: Fri, 8 Feb 2008 19:15:55 +0000 (-0600) Subject: 83xx: Add Vitesse VSC7385 firmware uploading X-Git-Tag: v1.3.3-rc1~168 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=89c7784ed90ba50301eec521144f95111e472906;p=oweals%2Fu-boot.git 83xx: Add Vitesse VSC7385 firmware uploading Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET. Cleaned up the board header files to make selecting the VSC7385 easier to control. Signed-off-by: Timur Tabi Signed-off-by: Kim Phillips --- diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c index 42019fb80c..7cbdb7bf31 100644 --- a/board/freescale/mpc8313erdb/mpc8313erdb.c +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -28,6 +28,7 @@ #endif #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -98,6 +99,26 @@ void pci_init_board(void) mpc83xx_pci_init(1, reg, warmboot); } +/* + * Miscellaneous late-boot configurations + * + * If a VSC7385 microcode image is present, then upload it. +*/ +int misc_init_r(void) +{ + int rc = 0; + +#ifdef CONFIG_VSC7385_IMAGE + if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, + CONFIG_VSC7385_IMAGE_SIZE)) { + puts("Failure uploading VSC7385 microcode.\n"); + rc = 1; + } +#endif + + return rc; +} + #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 972361fd68..704f9636bc 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -25,6 +25,7 @@ #include #include #include +#include #ifdef CONFIG_PCI #include #include @@ -177,7 +178,7 @@ int checkboard(void) */ int misc_init_f(void) { -#ifdef CONFIG_VSC7385 +#ifdef CONFIG_VSC7385_ENET volatile u32 *vsc7385_cpuctrl; /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up @@ -239,6 +240,8 @@ int misc_init_f(void) } /* + * Miscellaneous late-boot configurations + * * Make sure the EEPROM has the HRCW correctly programmed. * Make sure the RTC is correctly programmed. * @@ -250,6 +253,8 @@ int misc_init_f(void) * * This function makes sure that the I2C EEPROM is programmed * correctly. + * + * If a VSC7385 microcode image is present, then upload it. */ int misc_init_r(void) { @@ -375,6 +380,14 @@ int misc_init_r(void) i2c_set_bus_num(orig_bus); #endif +#ifdef CONFIG_VSC7385_IMAGE + if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, + CONFIG_VSC7385_IMAGE_SIZE)) { + puts("Failure uploading VSC7385 microcode.\n"); + rc = 1; + } +#endif + return rc; } diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index bed0fc37ea..a3b20b8f95 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -16,6 +16,8 @@ #include #include #include +#include + #if defined(CFG_DRAM_TEST) int @@ -56,11 +58,6 @@ testdram(void) } #endif -int board_early_init_f(void) -{ - return 0; -} - #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) void ddr_enable_ecc(unsigned int dram_size); #endif @@ -135,6 +132,26 @@ int checkboard(void) return 0; } +/* + * Miscellaneous late-boot configurations + * + * If a VSC7385 microcode image is present, then upload it. +*/ +int misc_init_r(void) +{ + int rc = 0; + +#ifdef CONFIG_VSC7385_IMAGE + if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, + CONFIG_VSC7385_IMAGE_SIZE)) { + puts("Failure uploading VSC7385 microcode.\n"); + rc = 1; + } +#endif + + return rc; +} + #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index f12a3e605e..9576fa59e2 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -38,6 +38,14 @@ #define CONFIG_PCI #define CONFIG_83XX_GENERIC_PCI +#define CONFIG_MISC_INIT_R + +/* + * On-board devices + */ +#define CONFIG_VSC7385_ENET + + #ifdef CFG_66MHZ #define CONFIG_83XX_CLKIN 66666667 /* in Hz */ #elif defined(CFG_33MHZ) @@ -64,6 +72,22 @@ #define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ #define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ +/* + * Device configurations + */ + +/* Vitesse 7385 */ + +#ifdef CONFIG_VSC7385_ENET + +#define CONFIG_TSEC2 + +/* The flash address and size of the VSC7385 firmware image */ +#define CONFIG_VSC7385_IMAGE 0xFE7FE000 +#define CONFIG_VSC7385_IMAGE_SIZE 8192 + +#endif + /* * DDR Setup */ @@ -214,19 +238,24 @@ #define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE #define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ +/* local bus read write buffer mapping */ +#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */ +#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */ +#define CFG_LBLAWBAR3_PRELIM 0xFA000000 +#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ + +/* Vitesse 7385 */ + #define CFG_VSC7385_BASE 0xF0000000 -#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ +#ifdef CONFIG_VSC7385_ENET + #define CFG_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */ #define CFG_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/ #define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE/* Access window base at VSC7385 base */ #define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access window size 128K */ -/* local bus read write buffer mapping */ -#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */ -#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */ -#define CFG_LBLAWBAR3_PRELIM 0xFA000000 -#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ +#endif /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 @@ -263,13 +292,6 @@ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 -/* TSEC */ -#define CFG_TSEC1_OFFSET 0x24000 -#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) -#define CFG_TSEC2_OFFSET 0x25000 -#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) -#define CONFIG_NET_MULTI - /* * General PCI * Addresses are mapped 1-1. @@ -288,26 +310,31 @@ #define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ /* - * TSEC configuration + * TSEC */ #define CONFIG_TSEC_ENET /* TSEC ethernet support */ -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 -#endif - -#define CONFIG_GMII 1 /* MII PHY management */ -#define CONFIG_TSEC1 1 +#define CONFIG_NET_MULTI +#define CONFIG_GMII /* MII PHY management */ +#ifdef CONFIG_TSEC1 +#define CONFIG_HAS_ETH0 #define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 +#define CFG_TSEC1_OFFSET 0x24000 +#define TSEC1_PHY_ADDR 0x1c +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC1_PHYIDX 0 +#endif + +#ifdef CONFIG_TSEC2 +#define CONFIG_HAS_ETH1 #define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 0x1c -#define TSEC2_PHY_ADDR 4 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 +#define CFG_TSEC2_OFFSET 0x25000 +#define TSEC2_PHY_ADDR 4 +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC2_PHYIDX 0 +#endif + /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC1" @@ -496,10 +523,13 @@ */ #define CONFIG_ENV_OVERWRITE +#ifdef CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:95:01 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH0 +#endif + +#ifdef CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:95:02 +#endif #define CONFIG_IPADDR 10.0.0.2 #define CONFIG_SERVERIP 10.0.0.1 diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 48c2736fcb..0e50186765 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -68,12 +68,16 @@ #define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */ +#define CONFIG_MISC_INIT_F +#define CONFIG_MISC_INIT_R -/* On-board devices */ +/* + * On-board devices + */ #ifdef CONFIG_MPC8349ITX #define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ -#define CONFIG_VSC7385 /* The Vitesse 7385 5-port switch */ +#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ #endif #define CONFIG_PCI @@ -88,9 +92,6 @@ /* I2C */ #ifdef CONFIG_HARD_I2C -#define CONFIG_MISC_INIT_F -#define CONFIG_MISC_INIT_R - #define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS #define CONFIG_I2C_CMD_TREE @@ -190,6 +191,18 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_FLASH_SIZE 16 /* FLASH size in MB */ #define CFG_FLASH_SIZE_SHIFT 4 /* log2 of the above value */ +/* Vitesse 7385 */ + +#ifdef CONFIG_VSC7385_ENET + +#define CONFIG_TSEC2 + +/* The flash address and size of the VSC7385 firmware image */ +#define CONFIG_VSC7385_IMAGE 0xFEFFE000 +#define CONFIG_VSC7385_IMAGE_SIZE 8192 + +#endif + /* * BRx, ORx, LBLAWBARx, and LBLAWARx */ @@ -205,10 +218,10 @@ boards, we say we have two, but don't display a message if we find only one. */ /* Vitesse 7385 */ -#ifdef CONFIG_VSC7385 - #define CFG_VSC7385_BASE 0xF8000000 +#ifdef CONFIG_VSC7385_ENET + #define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V) #define CFG_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \ @@ -384,7 +397,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_HAS_ETH1 #define CONFIG_TSEC2_NAME "TSEC1" #define CFG_TSEC2_OFFSET 0x25000 -#define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ + #define TSEC2_PHY_ADDR 4 #define TSEC2_PHYIDX 0 #define TSEC2_FLAGS TSEC_GIGABIT @@ -619,11 +632,11 @@ boards, we say we have two, but don't display a message if we find only one. */ */ #define CONFIG_ENV_OVERWRITE -#ifdef CONFIG_TSEC1 +#ifdef CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:8C:01 #endif -#ifdef CONFIG_TSEC2 +#ifdef CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 #endif diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 1964946ec8..0d79aaeac8 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -32,6 +32,14 @@ #define CONFIG_PCI 1 +#define CONFIG_MISC_INIT_R + +/* + * On-board devices + */ +#define CONFIG_TSEC_ENET /* TSEC Ethernet support */ +#define CONFIG_VSC7385_ENET + /* * System Clock Setup */ @@ -117,6 +125,22 @@ */ #define CFG_IMMR 0xE0000000 +/* + * Device configurations + */ + +/* Vitesse 7385 */ + +#ifdef CONFIG_VSC7385_ENET + +#define CONFIG_TSEC2 + +/* The flash address and size of the VSC7385 firmware image */ +#define CONFIG_VSC7385_IMAGE 0xFE7FE000 +#define CONFIG_VSC7385_IMAGE_SIZE 8192 + +#endif + /* * DDR Setup */ @@ -251,15 +275,19 @@ #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +/* Vitesse 7385 */ + #define CFG_VSC7385_BASE 0xF0000000 -/* VSC7385 Gigabit Switch support */ -#define CONFIG_VSC7385_ENET +#ifdef CONFIG_VSC7385_ENET + #define CFG_BR2_PRELIM 0xf0000801 /* Base address */ #define CFG_OR2_PRELIM 0xfffe09ff /* 128K bytes*/ #define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE /* Access Base */ #define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access Size 128K */ +#endif + /* * Serial Port */ @@ -324,43 +352,43 @@ #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#undef CONFIG_EEPRO100 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ #endif /* CONFIG_PCI */ -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 -#endif - /* * TSEC */ -#define CONFIG_TSEC_ENET /* TSEC ethernet support */ -#define CFG_TSEC1_OFFSET 0x24000 -#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) -#define CFG_TSEC2_OFFSET 0x25000 -#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) +#ifdef CONFIG_TSEC_ENET -/* - * TSEC ethernet configuration - */ -#define CONFIG_GMII 1 /* MII PHY management */ -#define CONFIG_TSEC1 1 +#define CONFIG_NET_MULTI +#define CONFIG_GMII /* MII PHY management */ + +#define CONFIG_TSEC1 + +#ifdef CONFIG_TSEC1 +#define CONFIG_HAS_ETH0 #define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" +#define CFG_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 0x1c #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) #define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 +#endif +#ifdef CONFIG_TSEC2 +#define CONFIG_HAS_ETH1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define CFG_TSEC2_OFFSET 0x25000 +#define TSEC2_PHY_ADDR 0x1c +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_PHYIDX 0 +#endif /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" +#endif + /* * Environment */ @@ -529,10 +557,13 @@ */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_HAS_ETH0 /* add support for "ethaddr" */ -#define CONFIG_ETHADDR 00:04:9f:ef:04:01 -#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */ -#define CONFIG_ETH1ADDR 00:04:9f:ef:04:02 +#ifdef CONFIG_HAS_ETH0 +#define CONFIG_ETHADDR 00:04:9f:ef:04:01 +#endif + +#ifdef CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:04:9f:ef:04:02 +#endif #define CONFIG_IPADDR 10.0.0.2 #define CONFIG_SERVERIP 10.0.0.1