From: Simon Glass <sjg@chromium.org>
Date: Wed, 8 May 2013 08:05:59 +0000 (+0000)
Subject: image: Add CONFIG_FIT_SPL_PRINT to control FIT image printing in SPL
X-Git-Tag: v2013.07-rc1~1^2~31
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=87ebee39e9d02dba6d36d03d512e7d6e8a5a9abb;p=oweals%2Fu-boot.git

image: Add CONFIG_FIT_SPL_PRINT to control FIT image printing in SPL

This code is very large, and in SPL it isn't always useful to print
out image information (in fact there might not even be a console
active). So disable this feature unless this option is set.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

diff --git a/README b/README
index defdedbef1..d832bcbb7c 100644
--- a/README
+++ b/README
@@ -2997,6 +2997,12 @@ FIT uImage format:
 		use an arch-specific makefile fragment instead, for
 		example if more than one image needs to be produced.
 
+		CONFIG_FIT_SPL_PRINT
+		Printing information about a FIT image adds quite a bit of
+		code to SPL. So this is normally disabled in SPL. Use this
+		option to re-enable it. This will affect the output of the
+		bootm command when booting a FIT image.
+
 Modem Support:
 --------------
 
diff --git a/common/image-fit.c b/common/image-fit.c
index ec7b038dbe..254feecaad 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -124,6 +124,7 @@ static void fit_get_debug(const void *fit, int noffset,
 	      fdt_strerror(err));
 }
 
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_FIT_SPL_PRINT)
 /**
  * fit_print_contents - prints out the contents of the FIT format image
  * @fit: pointer to the FIT format image header
@@ -402,6 +403,7 @@ void fit_image_print(const void *fit, int image_noffset, const char *p)
 		}
 	}
 }
+#endif
 
 /**
  * fit_get_desc - get node description property
@@ -852,16 +854,16 @@ int fit_set_timestamp(void *fit, int noffset, time_t timestamp)
 int calculate_hash(const void *data, int data_len, const char *algo,
 			uint8_t *value, int *value_len)
 {
-	if (strcmp(algo, "crc32") == 0) {
+	if (IMAGE_ENABLE_CRC32 && strcmp(algo, "crc32") == 0) {
 		*((uint32_t *)value) = crc32_wd(0, data, data_len,
 							CHUNKSZ_CRC32);
 		*((uint32_t *)value) = cpu_to_uimage(*((uint32_t *)value));
 		*value_len = 4;
-	} else if (strcmp(algo, "sha1") == 0) {
+	} else if (IMAGE_ENABLE_SHA1 && strcmp(algo, "sha1") == 0) {
 		sha1_csum_wd((unsigned char *)data, data_len,
 			     (unsigned char *)value, CHUNKSZ_SHA1);
 		*value_len = 20;
-	} else if (strcmp(algo, "md5") == 0) {
+	} else if (IMAGE_ENABLE_MD5 && strcmp(algo, "md5") == 0) {
 		md5_wd((unsigned char *)data, data_len, value, CHUNKSZ_MD5);
 		*value_len = 16;
 	} else {
diff --git a/include/image.h b/include/image.h
index 27c977e534..bfce86186e 100644
--- a/include/image.h
+++ b/include/image.h
@@ -61,8 +61,37 @@
 #if defined(CONFIG_FIT)
 #include <libfdt.h>
 #include <fdt_support.h>
-#define CONFIG_MD5		/* FIT images need MD5 support */
-#define CONFIG_SHA1		/* and SHA1 */
+# ifdef CONFIG_SPL_BUILD
+#  ifdef CONFIG_SPL_CRC32_SUPPORT
+#   define IMAGE_ENABLE_CRC32	1
+#  endif
+#  ifdef CONFIG_SPL_MD5_SUPPORT
+#   define IMAGE_ENABLE_MD5	1
+#  endif
+#  ifdef CONFIG_SPL_SHA1_SUPPORT
+#   define IMAGE_ENABLE_SHA1	1
+#  endif
+# else
+#  define CONFIG_CRC32		/* FIT images need CRC32 support */
+#  define CONFIG_MD5		/* and MD5 */
+#  define CONFIG_SHA1		/* and SHA1 */
+#  define IMAGE_ENABLE_CRC32	1
+#  define IMAGE_ENABLE_MD5	1
+#  define IMAGE_ENABLE_SHA1	1
+# endif
+
+#ifndef IMAGE_ENABLE_CRC32
+#define IMAGE_ENABLE_CRC32	0
+#endif
+
+#ifndef IMAGE_ENABLE_MD5
+#define IMAGE_ENABLE_MD5	0
+#endif
+
+#ifndef IMAGE_ENABLE_SHA1
+#define IMAGE_ENABLE_SHA1	0
+#endif
+
 #endif
 
 /*