From: Mario Six Date: Fri, 26 Jan 2018 13:43:50 +0000 (+0100) Subject: cfi_flash: Fix strings split across lines X-Git-Tag: v2018.03-rc1~10^2~6 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=876c52f3c35738eab091c0ef2fad28d8cbaa2c5f;p=oweals%2Fu-boot.git cfi_flash: Fix strings split across lines Strings should not be split accross multiple lines. Where possible and not detrimental to readability, fix the instances where this occurs. Signed-off-by: Mario Six Signed-off-by: Stefan Roese --- diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index fced9847ef..8040e43de7 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1255,10 +1255,9 @@ void flash_print_info(flash_info_t *info) info->erase_blk_tout, info->write_tout); if (info->buffer_size > 1) { - printf(" Buffer write timeout: %ld ms, " - "buffer size: %d bytes\n", - info->buffer_write_tout, - info->buffer_size); + printf(" Buffer write timeout: %ld ms, ", + info->buffer_write_tout); + printf("buffer size: %d bytes\n", info->buffer_size); } puts("\n Sector Start Addresses:"); @@ -2050,8 +2049,8 @@ static void flash_fixup_num(flash_info_t *info, struct cfi_qry *qry) info->device_id2 == 0x2301 || info->device_id2 == 0x2801 || info->device_id2 == 0x4801)) { - debug("Adjusted buffer size on Numonyx flash" - " M29EW family in 8 bit mode\n"); + debug("Adjusted buffer size on Numonyx flash"); + debug(" M29EW family in 8 bit mode\n"); qry->max_buf_write_size = 0x8; } } @@ -2388,9 +2387,9 @@ unsigned long flash_init(void) size += flash_info[i].size; if (flash_info[i].flash_id == FLASH_UNKNOWN) { #ifndef CONFIG_SYS_FLASH_QUIET_TEST - printf("## Unknown flash on Bank %d " - "- Size = 0x%08lx = %ld MB\n", - i + 1, flash_info[i].size, + printf("## Unknown flash on Bank %d ", i + 1); + printf("- Size = 0x%08lx = %ld MB\n", + flash_info[i].size, flash_info[i].size >> 20); #endif /* CONFIG_SYS_FLASH_QUIET_TEST */ }