From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Thu, 24 Jan 2019 08:28:59 +0000 (+0100)
Subject: arm64: dts: zcu100-revC: Give wifi some time after power-on
X-Git-Tag: v2020.04-rc1~20^2~5
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=85eeaae3ccd2a0cd58e6f8e5794224948a6c40a2;p=oweals%2Fu-boot.git

arm64: dts: zcu100-revC: Give wifi some time after power-on

Somewhere along recent changes to power control of the wl1831, power-on
became very unreliable on the Ultra96, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms,
Ultra96 is already happy with 10 ms.

Fixes: 5869ba0653b9 ("arm64: zynqmp: Add support for Xilinx zcu100-revC")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index 02573a1f32..986f50cf32 100644
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -123,6 +123,7 @@
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		post-power-on-delay-ms = <10>;
 	};
 
 	ina226 {