From: Gabor Juhos Date: Wed, 22 May 2013 03:57:46 +0000 (+0000) Subject: MIPS: start.S: emulate REVISION register for qemu-malta X-Git-Tag: v2013.10-rc1~65^2~20 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=843a76b66be70a28a55f295fa72faa74dde9e02b;p=oweals%2Fu-boot.git MIPS: start.S: emulate REVISION register for qemu-malta On the origial Malta boards the REVISION register is accessible at the 0x1fc00010 address. The contents of this register gives information about the revision of the Malta and Core Boards. This register is used by the Linux kernel to identify the actual board it is running on. However the register is not emulated properly by Qemu, so put a hardcoded value into the flash to make Linux work. Signed-off-by: Gabor Juhos Cc: Daniel Schwierzeck --- diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S index b08a897af0..2f1e486a00 100644 --- a/arch/mips/cpu/mips32/start.S +++ b/arch/mips/cpu/mips32/start.S @@ -41,7 +41,7 @@ _start: nop .org 0x10 -#ifdef CONFIG_SYS_XWAY_EBU_BOOTCFG +#if defined(CONFIG_SYS_XWAY_EBU_BOOTCFG) /* * Almost all Lantiq XWAY SoC devices have an external bus unit (EBU) to * access external NOR flashes. If the board boots from NOR flash the @@ -51,6 +51,12 @@ _start: */ .word CONFIG_SYS_XWAY_EBU_BOOTCFG .word 0x0 +#elif defined(CONFIG_QEMU_MALTA) + /* + * Linux expects the Board ID here. + */ + .word 0x00000420 # 0x420 (Malta Board with CoreLV) + .word 0x00000000 #endif .org 0x200